The process of colloidal drying gives way to particle self-assembly in numerous elds including photonics or biotechnology. Yet, the mechanisms and conditions driving the nal particle arrangement in dry colloidal layers remain elusive. Here, we examine how the drying rate selects the nanostructure of thick dried layers in four dierent suspensions of silica nanospheres. Depending on particle size and dispersity, either an amorphous arrangement, a crystalline arrangement, or a rate-dependent amorphous-to-crystalline transition occurs at the drying surface. Amorphous arrangements are observed in the two most polydisperse suspensions while crystallinity occurs when dispersity is lower. Counter-intuitively in the latter case, a higher drying rate favors ordering of the particles. To complement these measurements and to take stock of the bulk properties of the layer, tests on the layer porosity were undertaken. For all suspensions studied herein, faster drying yields denser dry layers. Crystalline surface arrangement implies large bulk volume fraction ($\sim$ 0.65) whereas amorphous arrangements can be observed in layers with either low (down to $\sim$ 0.53) or high ($\sim$ 0.65) volume fraction. Lastly, we demonstrate via targeted additional experiments and SAXS measurements, that the packing structure of the layers is mainly driven by the formation of aggregates and their subsequent packing, and not by the competition between Brownian diusion and convection. This highlights that a second dimensionless ratio in addition to the Peclet number should be taken into account, namely the aggregation over evaporation timescale.
In directionally-dried colloidal dispersions regular bands can appear behind the drying front, inclined at $\pm45^\circ$ to the drying line. Although these features have been noted to share visual similarities to shear bands in metal, no physical mechanism for their formation has ever been suggested, until very recently. Here, through microscopy of silica and polystyrene dispersions, dried in Hele-Shaw cells, we demonstrate that the bands are indeed associated with local shear strains. We further show how the bands form, that they scale with the thickness of the drying layer, and that they are…
Aqueous colloidal dispersions of silica particles become anisotropic when they are dried through evaporation. This anisotropy is generated by a uniaxial strain of the liquid dispersions as they are compressed by the flow of water toward a solidification front. Part of the strain produced by the compression is relaxed, and part of it is stored and transferred to the solid. This stored elastic strain has consequences for the properties of the solid, where it may facilitate the growth of shear bands, and generate birefringence.
The present study experimentally and numerically investigates the evaporation and resultant patterns of dried deposits of aqueous colloidal sessile droplets, when the droplets are initially elevated to a high temperature before being placed on a substrate held at ambient temperature. The system is then released for natural evaporation without applying any external perturbation. Infrared thermography and optical profilometry were used as essential tools for interfacial temperature measurements and quantification of the coffee-ring dimensions, respectively. Initially, a significant temperature g…
Some of our recent studies of the structure and mechanical properties of a special type of nanocomposite are reviewed here. In silica-latex systems, a latex film with silica inclusions is formed from a colloidal solution of both components. During drying of the solution, the formation of silica domains can be controlled via the physico-chemical properties of the solution. Well-defined silica aggregates embedded in a polymer matrix can be generated, and the mechanical properties of the resulting nanocomposite have been shown to be directly correlated to the average structure.
The gelation kinetics of silica nanoparticles is a central process in physical chemistry, yet it is not fully understood. Gelation times are measured to increase by over 4 orders of magnitude, simply changing the monovalent salt species from CsCl to LiCl. This striking effect has no microscopic explanation within current paradigms. The trend is consistent with the Hofmeister series, pointing to short-ranged solvation effects not included in the standard colloidal (DLVO) interaction potential. By implementing a simple form for short-range repulsion within a model that relates the gelation times…
When a liquid film of colloidal solution consisting of particles of different sizes is dried on a substrate, the colloids often stratify, where smaller colloids are laid upon larger colloids. This phenomenon is counter intuitive because larger colloids which have smaller diffusion constant are expected to remain near the surface during the drying process, leaving the layer of larger colloids on top of smaller colloids. Here we show that the phenomenon is caused by the interaction between the colloids, and can be explained by the diffusion model which accounts for the interaction between the co…
We report an experimental study on the drying of silica colloidal dispersions. Here we focus on a surface instability occurring in a drying paste phase before crack formation which affects the final film quality. Observations at macroscopic and microscopic scales reveal the occurrence of the instability, and the morphology of the film surface. Furthermore, we show that the addition of adsorbing polymers on silica particles can be used to suppress the instability under particular conditions of molecular weight and concentration. We relate this suppression to the increase of the paste elastic mo…
Drying of colloidal dispersion and their consolidation into a particulate deposit is a common phenomenon. This process involves various physical processes such as diffusion of liquid molecules into the ambient atmosphere and advection of dispersed particles via evaporation driven flow. The colloidal particles forming a dried deposit exhibits distinct patterns and frequently possess structural defects such as desiccation cracks. This chapter gives an introductory review of the drying of colloidal dispersion and various associated phenomena. In principle, the drying of colloid dispersion, the pr…
We successfully fabricated large grains of silica colloidal crystals in an inverted-triangle internal-shaped container (inverted-triangle container) by centrifugation. The largest grain in the container was much larger than that in a container which has a flat bottom and constant width (flat-bottomed container). The edged bottom of the inverted-triangle container eliminated the number of the grains, and then the broadened shape of the container effectively widened the grains.
The forces of electrical imaging strongly polarize the surface of colloidal silica. I used X-ray scattering to study the adsorbed 2-nm-thick compact layer of alkali ions at the surface of concentrated solutions of 5-nm, 7-nm, and 22-nm particles, stabilized either by NaOH or a mixture of NaOH and CsOH, with the total bulk concentration of alkali ions ranging from 0.1- to 0.7-mol/L. The observed structure of the compact layer is almost independent of the size of the particles and concentration of alkali base in the sol; it can be described by a two-layer model, i.e., an ~ 8 Angstrom thick layer…
The freezing of colloidal suspensions is encountered in many natural and engineering processes such as the freezing of soils, food engineering, and cryobiology. It can also be used as a bio-inspired, versatile, and environmentally-friendly processing route for porous materials and composites. Yet, it is still a puzzling phenomenon with many unexplained features, due to the complexity of the system and the space and time scales at which the process should be investigated. We demonstrate here the interest of fast X-ray computed tomography to provide time-lapse, three-dimensional, in situ imaging…
We develop a dynamical density functional theory based model for the drying of colloidal films on planar surfaces. We consider mixtures of two different sizes of hard-sphere colloids. Depending on the solvent evaporation rate and the initial concentrations of the two species, we observe varying degrees of stratification in the final dried films. Our model predicts the various structures described in the literature previously from experiments and computer simulations, in particular the small-on-top stratified films. Our model also includes the influence of adsorption of particles to the interfa…
In this work, we unravel the role of surface properties of colloidal particles on the formation of supraparticles (clusters of colloidal particles) in a colloidal Ouzo droplet. Self-lubricating colloidal Ouzo droplets are an efficient and simple approach to form supraparticles, overcoming the challenge of the coffee stain effect in situ. Supraparticles are an efficient route to high-performance materials in various fields, from catalysis to carriers for therapeutics. Yet, the role of the surface of colloidal particles in the formation of supraparticles using Ouzo droplets remains unknown. Ther…
Evaporating suspensions of colloidal particles lead to the formation of a variety of patterns, ranging from a left-over ring of a dried coffee drop to uniformly distributed solid pigments left behind wet paint. To characterize the transition between single rings, multiple concentric rings, broad bands, and uniform deposits, we investigate the dynamics of a drying droplet via a multiphase model of colloidal particles in a solvent. Our theory couples the inhomogeneous evaporation at the evolving droplet interface to the dynamics inside the drop, i.e. the liquid flow, local variations of the part…
Reinforcement of elastomers by colloidal nanoparticles is an important application where microstructure needs to be understood - and if possible controlled - if one wishes to tune macroscopic mechanical properties. Here the three-dimensional structure of big aggregates of nanometric silica particles embedded in a soft polymeric matrix is determined by Small Angle Neutron Scattering. Experimentally, the crowded environment leading to strong reinforcement induces a strong interaction between aggregates, which generates a prominent interaction peak in the scattering. We propose to analyze the tot…
This short review is devoted to the simple process of drying a multi-component droplet consisting of a complex fluid containing a salt. These processes provide a fascinating subject for study. The explanation of the rich variety of patterns formed is not only an academic challenge, but a problem of practical importance, as applications are growing in medical diagnosis and improvement of coating/printing technology. The fundamental scientific problem is the study of the mechanism of micro- and nanoparticle self-organization in open systems. The specific fundamental problem to be solved, related…
Tunable composite materials with interesting physical behavior can be designed through integrating unique optical properties of solid nanostructures with the facile responses of soft matter to weak external stimuli, but this approach remains challenged by their poorly controlled co-assembly at the mesoscale. Using scalable wet chemical synthesis procedures, we fabricated anisotropic gold-silica-dye colloidal nanostructures and then organized them into the device-scale (demonstrated for square inch cells) electrically tunable composites by simultaneously invoking molecular and colloidal self-as…
We report small-angle x-ray scattering (SAXS) experiments on aqueous dispersions of colloidal silica with a broad monomodal size distribution (polydispersity 18%, size 8 nm). Over a range of volume fractions the silica particles segregate to build first one, then two distinct sets of colloidal crystals. These dispersions thus demonstrate fractional crystallization and multiple-phase (bcc, Laves AB$_2$, liquid) coexistence. Their remarkable ability to build complex crystal structures from a polydisperse population originates from the intermediate-range nature of interparticle forces, and sugges…
-- A scientific hurdle in manufacturing solid films by drying colloidal layers is preventing them from fracturing. This paper examines how the drying rate of colloidal liquids influences the particle packing at the nanoscale in correlation with the crack patterns observed at the macroscale. Increasing the drying rate results in more ordered, denser solid structures, and the dried samples have more cracks.Yet, introducing a holding period (at a prescribed point) during the drying protocol results in a more disordered solid structure with significantly less cracks. To interpret these observation…
We analyze the evolution of the mechanical response of a colloidal suspension to an external tensile stress, from fracture to flow, as a function of the distance from the sol-gel transition. We cease to observe cracks at a finite distance from the transition. In an intermediate region where the phenomenon is clearly hysteretic, we observe the coexistence of both flow and fracture. Even when cracks are observed, the material in fact flows over a distance that increases in the vicinity of the transition.
We examine the behavior of spherical silica particles trapped at an air-nematic liquid crystal interface. When a strong normal anchoring is imposed, the beads spontaneously form various structures depending on their area density and the nematic thickness. Using optical tweezers, we determine the pair potential and explain the formation of these patterns. The energy profile is discussed in terms of capillary and elastic interactions. Finally, we detail the mechanisms that control the formation of an hexagonal lattice and analyze the role of gravity for curved interfaces.
We study the stress developed during the drying of a colloidal drop of silica nanoparticles. In particular, we use the wrinkling instability of a thin floating sheet to measure the net stress applied by the deposit on the substrate and we focus on the effect of the particle polydispersity. In the case of a bidisperse suspension, we show that a small number of large particles substantially decreases the expected stress, which we interpret as the formation of lower hydrodynamic resistance paths in the porous material. As colloidal suspensions are usually polydisperse, we show for different avera…
Forces between charged silica particles in solutions of multivalent coions are measured with colloidal probe technique based on atomic force microscopy. The concentration of 1:z electrolytes is systematically varied to understand the behavior of electrostatic interactions and double-layer properties in these systems. Although the coions are multivalent the Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory perfectly describes the measured force profiles. The diffuse-layer potentials and regulation properties are extracted from the forces profiles by using the DLVO theory. The dependencies o…
We study the phenomenon of self-assembly of silica micro-spheres on a glass plate during evaporation of the solvent from a colloidal suspension. Our experiments unveil an interesting competition between ordering and compaction in a strongly driven, out of equilibrium system arising from a slowing down of dynamics due to an impending glass transition. A suitable choice of experimental conditions minimizing the influence of many other competing phenomena that usually complicate probing of this underlying physics is crucial for our study. A re-entrant behavior in the order-disorder phase diagram …
The pattern and profile of a dried colloidal deposit formed after evaporation of a sessile water droplet containing polystyrene particles on a non-uniformly heated glass are investigated experimentally. In particular, the effects of temperature gradient across the substrate and particles size are investigated. The temperature gradient was imposed using Peltier coolers, and side visualization, infrared thermography, optical microscopy, and optical profilometry were employed to collect the data. On a uniformly heated substrate, a ring with an inner deposit is obtained, which is attributed to axi…
Aiming at fabrication of hybrid plasmonic-photonic crystals, gel-immobilized colloidal crystals made of a polystyrene colloidal suspension and an N-(Hydroxy methyl)acrylamid-based gel were immersed into an aqueous dispersion of gold nanoparticles. Atomic force microscope (AFM) observations have been performed for the gel-immobilized colloidal crystals with gold nanoparticles deposited on their surfaces. In the present study, the diameter of a colloidal sphere was c.a. 190 nm. The diameter of a gold nanoparticle was the same as in a preliminary study, c.a. 40 nm. Various immersion times up to t…
The structure of the adsorbed layer of alkali ions on the surface of colloidal silica solutions with a particle size of ~27 nm has been studied by reflectometry and diffuse scattering of synchrotron radiation with a photon energy of about 71 keV. Electron density profiles in the direction perpendicular to the surface have been reconstructed from experimental data and spectra of the correlation function of heights in the surface plane have been obtained. The revealed deviation of the integral and frequency characteristics of the roughness spectra of the silica sol surface from predictions of th…
Colloidal molecules are designed to mimic their molecular analogues through their anisotropic shape and interactions. However, current experimental realizations are missing the structural flexibility present in real molecules thereby restricting their use as model systems. We overcome this limitation by assembling reconfigurable colloidal molecules from silica particles functionalized with mobile DNA linkers in high yields. We achieve this by steering the self-assembly pathway towards the formation of finite-sized clusters by employing high number ratios of particles functionalized with comple…
The key parameter controlling the glass transition of colloidal suspensions is $φ$, the fraction of the sample volume occupied by the particles. Unfortunately, changing $φ$ by varying an external parameter, \textit{e.g.} temperature $T$ as in molecular glass formers, is not possible, unless one uses thermosensitive colloidal particles, like the popular poly(N-isopropylacrylamide) (PNiPAM) microgels. These however have several drawbacks, including high deformability, osmotic deswelling and interpenetration, which complicate their use as a model system to study the colloidal glass transition. He…
Interactions between silica surfaces across isopropanol solutions are measured with colloidal probe technique based on atomic force microscope. In particular, the influence of 1:1 electrolytes on the interactions between silica particles is investigated. A plethora of different forces are found in these systems. Namely, van der Waals, double-layer, attractive non-DLVO, repulsive solvation, and damped oscillatory interactions are observed. The measured decay length of the double-layer repulsion is substantially larger than Debye lengths calculated from nominal salt concentrations. These deviati…
Suspended microparticles subjected to AC electrical fields collectively organize into band patterns perpendicular to the field direction. The bands further develop into zigzag shaped patterns, in which the particles are observed to circulate. We demonstrate that this phenomenon can be observed quite generically by generating such patterns with a wide range of particles: silica spheres, fatty acid, oil, and coacervate droplets, bacteria, and ground coffee. We show that the phenomenon can be well understood in terms of second order electrokinetic flow, which correctly predicts the hydrodynamic i…
The spatial structure of the transition region between an insulator and an electrolyte solution was studied with x-ray scattering.The electron density profile across the n-hexane/silica sol interface (solutions with 5-nm, 7-nm, and 12-nm colloidal particles) agrees with the theory of the electrical double layer and shows separation of positive and negative charges. The interface consists of three layers, i.e., a compact layer of Na+, a loose monolayer of nanocolloidal particles as part of a thick diffuse layer, and a low-density layer sandwiched between them. Its structure is described by a mo…
We investigated the formation of cocontinuous structures in polymer blends. These polymeric bijels (bicontinuous interfacially jammed emulsion gels) were composed of polystyrene oligomer, polybutene and fluorescent hydrophobic silica nanoparticles. A micron-sized cocontinuous morphology was stabilized by a monolayer of silica nanoparticles at the interface. Real-time observation of coalescence dynamics in co-continuous polymer blends stabilized by interfacial particles was for the first time achieved via laser scanning confocal microscopy. We demonstrated that suppression of coalescence arises…
Swimming microorganisms can influence the diffusion of passive particles. The effect of this swimmer-particle interaction depends on different properties, such as the hydrodynamic field of the swimmer and the relative sizes of microorganisms and particles. We investigated an enhancement of the diffusion of silica doublets in a suspension of microalgae Chlamydomonas reinhardtii in a flat capillary. Depending on the concentration of microswimmers, the translational and rotational diffusion constants increase by several orders of magnitude in the presence of the swimming algae. For low concentrat…
Shear history plays an important role in determining the linear and nonlinear rheological response of colloidal gels and can be used for tuning their structure and flow properties. Increasing colloidal particle aspect ratio lowers the critical volume fraction for gelation due to an increase of the particle excluded volume. Using a combination of rheology and confocal microscopy we investigate the effect of steady and oscillatory pre-shear history on the structure and rheology of colloidal gels formed by silica spheres and rods of length L and diameter D (L/D = 10) dispersed in 11 M CsCl soluti…
Silica nanoparticles trapped at air-water interface form a 2D solid state with amorphous order. We propose a theoretical model to describe how this solid-like state deforms under a shear strain ramp up to and beyond a yielding point which leads to plastic flow. The model accounts for all the particle-level and many-body physics of the system: nonaffine displacements, local connectivity and its evolution in terms of cage-breaking, and interparticle interactions mediated by the particle chemistry and colloidal forces. The model is able to reproduce experimental data with only two non-trivial fit…
Hypothesis: Colloidal molecules with anisotropic shapes and interactions are powerful model systems for deciphering the behavior of real molecules and building units for creating materials with designed properties. While many strategies for their assembly have been developed, they typically yield a broad distribution or are limited to a specific type. We hypothesize that the shape and relative sizes of colloidal particles can be exploited to efficiently direct their assembly into colloidal molecules of desired valence. Experiments: We exploit electrostatic self-assembly of negatively charged s…
The authors previously introduced an activation model for the onset of shear thickening in electrically stabilized colloidal suspensions. It predicts that shear thickening occurs, when particles arranged along the compression axis in a sheared suspension do overcome the electrostatic repulsion at a critical shear stress, and are captured in the primary minimum of the DLVO interaction potential. A comparison with an experimental investigation on non-aqueous silica suspensions, carried out by Maranzano and Wagner, is performed. For particle systems that fall into the applicability range of the t…
Charged colloidal dispersions make up the basis of a broad range of industrial and commercial products, from paints to coatings and additives in cosmetics. During drying, an initially liquid dispersion of such particles is slowly concentrated into a solid, displaying a range of mechanical instabilities in response to highly variable internal pressures. Here we summarise the current appreciation of this process by pairing an advection-diffusion model of particle motion with a Poisson-Boltzmann cell model of inter-particle interactions, to predict the concentration gradients around a drying coll…
We combine experiments and numerical simulations to investigate the emergence of clogging in a system of interacting paramagnetic colloidal particles driven against a disordered landscape of larger obstacles. We consider a single aperture in a landscape of immobile silica particles which are irreversibly attached to the substrate. We use an external rotating magnetic field to generate a traveling wave potential which drives the magnetic particles against these obstacles at a constant and frequency tunable speed. Experimentally we find that the particles display an intermittent dynamics with po…
Salt-induced aggregation of 20 nm colloidal silica is followed by light transmission, which shows an a kinetic form exp[-(t/t_0)^α], where α= 2.6 and t_0 is an empirical time constant which reflects the colloidal stability. We found a power law dependence of t_0 on ionic strength, which can be explained by the classical DLVO theory. The neutral polymers polyethylene glycol (PEG) accelerate the aggregation rate, and those with higher molecular weight are more effective in inducing the aggregation with similar stretched exponential form of kinetics. Current theories of polymer-mediated interacti…
The vertical drying of a colloidal film containing rod-like particles was studied by means of kinetic Monte Carlo (MC) simulation. The problem was approached using a two-dimensional square lattice and the rods were represented as linear $k$-mers (i.e., particles occupying $k$ adjacent sites). The initial state before drying was produced using a model of random sequential adsorption (RSA) with isotropic orientations of the $k$-mers (orientation of the $k$-mers along horizontal $x$ and vertical $y$ directions are equiprobable). In the RSA model, overlapping of the $k$-mers is forbidden. During t…
The trajectories of colloidal particles driven through a periodic potential energy landscape can become kinetically locked in to directions dictated by the landscape's symmetries. When the landscape is realized with forces exerted by a structured light field, the path a given particle follows has been predicted to depend exquisitely sensitively on such properties as the particle's size and refractive index These predictions, however, have not been tested experimentally. Here, we describe measurements of colloidal silica spheres' transport through arrays of holographic optical traps that use ho…
Shear thickening is a widespread phenomenon in suspension flow that, despite sustained study, is still the subject of much debate. The longstanding view that shear thickening is due to hydrodynamic clusters has been challenged by recent theory and simulations suggesting that contact forces dominate, not only in discontinuous, but also in continuous shear thickening. Here, we settle this dispute using shear reversal experiments on micron-sized silica and latex colloidal particles to measure directly the hydrodynamic and contact force contributions to shear thickening. We find that contact force…
Previous experiments have shown that spherical colloidal particles relax to equilibrium slowly after they adsorb to a liquid-liquid interface, despite the large interfacial energy gradient driving the adsorption. The slow relaxation has been explained in terms of transient pinning and depinning of the contact line on the surface of the particles. However, the nature of the pinning sites has not been investigated in detail. We use digital holographic microscopy to track a variety of colloidal spheres---inorganic and organic, charge-stabilized and sterically stabilized, aqueous and non-aqueous--…
Hypothesis: New dynamic phenomena can be observed in evaporating free liquid films from colloidal solutions with bimodal particle size distribution. Such distributions are formed in a natural way in mixed (slightly turbid) solutions of cationic and anionic surfactants, where nanosized micelles coexist with micronsized precipitated particles. Experiment: Without evaporation of water, the films thin down to thickness < 100 nm. Upon water evaporation from the film, one observes spontaneous film thickening (above 300 nm) and appearance of a dynamic vortex with a spot of thinner film in the center.…
We report on a comprehensive theory-simulation-experimental study of collective and self-diffusion in suspensions of charge-stabilized colloidal spheres. In simulation and theory, the spheres interact by a hard-core plus screened Coulomb pair potential. Intermediate and self-intermediate scattering functions are calculated by accelerated Stokesian Dynamics simulations where hydrodynamic interactions (HIs) are fully accounted for. The study spans the range from the short-time to the colloidal long-time regime. Additionally, Brownian Dynamics simulation and mode-coupling theory (MCT) results are…
We computed the self-organisation process of a monodisperse collection of spherical micrometric particles trapped in a two-dimensional (2D) thin liquid film isothermally dried on a chemically inert substrate. The substrate is either flat or indented to create linear stripes on its surface. The numerical results are illustrated and discussed in the light of experimental ones obtained from the drying of diamond particles water based suspension ($d_{50} = 10 μm$) on a glass substrate. The drying of the suspension on a flat substrate leads to the formation of linear patterns and small clusters of …
