Two-dimensional semiconductors are excellent candidates for next-generation electronics and optoelec-tronics thanks to their electrical properties and strong light-matter interaction. To fabricate devices with optimal electrical properties, it is crucial to have both high-quality semiconducting crystals and ideal con-tacts at metal-semiconductor interfaces. Thanks to the mechanical exfoliation of van der Waals crystals, atomically-thin high-quality single-crystals can easily be obtained in a laboratory. However, conventional metal deposition techniques can introduce chemical disorder and metal-induced mid-gap states that induce Fermi level pinning and can degrade the metal-semiconductor interfaces, resulting in poorly performing devices. In this article, we explore the electrical contact characteristics of Au-InSe and graphite-InSe van der Waals contacts, obtained by stacking mechanically exfoliated InSe flakes onto pre-patterned Au or graphite electrodes without the need of lithography or metal deposition. The high quality of the metal-semiconductor interfaces obtained by van der Waals contact allows to fabricate high-quality Schottky di-odes based on the Au-InSe Schottky barrier. Our experimental observation indicates that the contact barrier at the graphite-InSe interface is negligible due to the similar electron affinity of InSe and graphite, while the Au-InSe interfaces are dominated by a large Schottky barrier.
We describe a new means for electrically creating spin polarization in semiconductors. In contrast to spin injection of electrons by tunneling through a reverse-biased Schottky barrier, we observe spin accumulation at the metal/semiconductor interface of forward-biased ferromagnetic Schottky diodes, which is consistent with a theory of spin-dependent reflection off the interface. Spatiotemporal Kerr microscopy is used to image the electron spin and the resulting dynamic nuclear polarization that arises from the non equilibrium carrier polarization.
We employ optical pump-probe spectroscopy to investigate the voltage dependence of spontaneous electron and nuclear spin polarizations in hybrid MnAs/n-GaAs and Fe/n-GaAs Schottky diodes. Through the hyperfine interaction, nuclear spin polarization that is imprinted by the ferromagnet acts on conduction electron spins as an effective magnetic field. We demonstrate tuning of this nuclear field from <0.05 to 2.4 kG by varying a small bias voltage across the MnAs device. In addition, a connection is observed between the diode turn-on and the onset of imprinted nuclear polarization, while traditio…
We present theoretical and experimental studies of Schottky diodes that use aligned arrays of single walled carbon nanotubes. A simple physical model, taking into account the basic physics of current rectification, can adequately describe the single-tube and array devices. We show that for as grown array diodes, the rectification ratio, defined by the maximum-to-minimum-current-ratio, is low due to the presence of m-SWNT shunts. These tubes can be eliminated in a single voltage sweep resulting in a high rectification array device. Further analysis also shows that the channel resistance, and no…
Recently demonstrated metal-semiconductor heterojunctions with few-atom thickness show their promise as 2D Schottky contacts for future integrated circuits and nanoelectronics. The theory for 3D Schottky contacts, however, fails on these low-dimensional systems. Here, we propose a new model that yields carrier distribution and potential profile across the 2D metal-semiconductor heterojunction under the equilibrium condition, based on the input from first-principle calculations. Our calculation also suggests that, at the same forward bias, the current density of a stack of 2D graphene-phosphore…
The proper understanding of semiconductor devices begins at the metal-semiconductor interface. The metal/semiconductor interface itself can also be an important device, as Schottky junctions often forms when the doping in the semiconductors is low. Here, we extend the analysis of metal-silicon Schottky junctions by using graphene, an atomically thin semimetal. We show that a fundamentally new transport model is needed to describe the graphene-silicon Schottky junction. While the current-voltage behavior follows the celebrated ideal diode behavior, the details of the diode characteristics is be…
Metal-semiconductor interfaces, known as Schottky junctions, have long been hindered by defects and impurities. Such imperfections dominate the electrical characteristics of the junction by pinning the metal Fermi energy. We report measurements on a boron nitride encapsulated graphene-tungsten diselenide (WSe$_2$) Schottky junction which exhibits ideal diode characteristics and a complete lack of Fermi-level pinning. The Schottky barrier height of the device is rigidly tuned by electrostatic gating of the WSe$_2$, enabling experimental verification of the Schottky-Mott limit in a single device…
In this paper we carry out a theoretical and experimental study of the nature of graphene/semiconductor Schottky contact. We present a simple and parameter-free carrier transport model of graphene/semiconductor Schottky contact derived from quantum statistical theory, which is validated by the quantum Landauer theory and first-principle calculations. The proposed model can well explain experimental results for samples of different types of graphene/semiconductor Schottky contact.
In this work we present silicon process compatible, stable and reliable ($>10^{8}$cycles), high non-linearity ratio at half-read voltage ($>5\times 10^{5}$), high speed ($<60ns$) low operating voltage ($<2V$) back-to-back Schottky diodes. Materials choice of electrode, thickness of semiconductor layer and doping level are investigated by numerical simulation, experiments and current-voltage equations to give a general design consideration when back-to-back Schottky diodes are used as selector device for Resistive Random Access Memory(RRAM) arrays.
Molecular beam epitaxy is employed to manufacture self-assembled InAs/GaAs quantum dot Schottky resonant tunneling diodes. By virtue of a thin AlAs insertion barrier, the thermal current is effectively reduced and electron resonant tunneling through quantum dots under both forward and reverse biased conditions is observed at relatively high temperature of 77K. The ground states of quantum dots are found to be at ~0.19eV below the conduction band of GaAs matrix. The theoretical computations are in conformity with experimental data.
In this paper the theory of high-frequency acoustic signal detection by Schottky diodes is presented. Physically, the detection was found to be due to the quasi-static screening of the potential perturbation caused by the acoustic strain by charge carriers. The total charge required for screening changes with the value of strain at the edge of the semiconductor depletion region and metal-semiconductor interface giving rise to displacement current. The magnitude and frequency dependence of the electrical signals are analyzed for both piezoelectric and deformation potential coupling mechanisms. …
We give a theoretical interpretation of the noise properties of Schottky barrier diodes based on the role played by the long range Coulomb interaction. We show that at low bias Schottky diodes display shot noise because the presence of the depletion layer makes negligible the effects of the Coulomb interaction on the current fluctuations. When the device passes from barrier to flat band conditions, the Coulomb interaction becomes active, thus introducing correlation between different current fluctuations. Therefore, the cross-over between shot and thermal noise represents the suppression due t…
We present the optoelectronic characterization of two graphene/silicon Schottky junctions, fabricated by transferring CVD-graphene on flat and nanotip-patterned n-Si substrates, respectively. We demonstrate record photo responsivity, exceeding 2.5 A/W under white light, which we attribute to the contribution of charges photogenerated in the surrounding region of the flat junction or to the internal gain by impact ionization caused by the enhanced field on the nanotips.
Here, we report the observation of a hitherto unreported optoelectronic effect, namely a light-induced diode-like response in multi-layered MoSe$_2$ field-effect transistors whose sense of current rectification is controllable through a gate voltage. We argue, through numerical simulations, that this behavior results from the difference in the size of the Schottky barriers between drain and source metal contacts. Each barrier can be modeled as a Schottky diode but with opposite senses of current rectification between them, with the diode response resulting from the light induced promotion of p…
We demonstrate control by applied electric field of the charge states in single self-assembled InP quantum dots placed in GaInP Schottky structures grown by metalorganic vapor phase epitaxy. This has been enabled by growth optimization leading to suppression of formation of large dots uncontrollably accumulating charge. Using bias- and polarization-dependent micro-photoluminescence, we identify the exciton multi-particle states and carry out a systematic study of the neutral exciton state dipole moment and polarizability. This analysis allows for the characterization of the exciton wavefunctio…
Graphene-Silicon Schottky diode photodetectors possess beneficial properties such as high responsivities and detectivities, broad spectral wavelength operation and high operating speeds. Various routes and architectures have been employed in the past to fabricate devices. Devices are commonly based on the removal of the silicon-oxide layer on the surface of silicon by wet-etching before deposition of graphene on top of silicon to form the graphene-silicon Schottky junction. In this work, we systematically investigate the influence of the interfacial oxide layer, the fabrication technique emplo…
Because the conductivity of organic semiconductors is very low, a useful model for the organic diode consists of treating the organic layer as an insulator, an approximation often referred to as the metal-insulator-metal (MIM) model. Moreover, the dominant charge carrier injection process is diffusion, so that a modified Schottky theory can be used to derive a simple analytical equation for the current voltage curve of the diode. Here, we carried out a full analysis of the MIM model for the organic diode. We show that Schottky theory is only valid when charge injection is poor, that is, for hi…
An increase in power consumption necessitates a low-power circuit technology to extend Moore's law. Low-power transistors, such as tunnel field-effect transistors (TFETs), negative-capacitance field-effect transistors (NC-FETs), and Dirac-source field-effect transistors (DS-FETs), have been realised to break the thermionic limit of the subthreshold swing (SS). However, a low-power diode rectifier, which breaks the thermionic limit of an ideality factor (n) of 1 at room temperature, has not been proposed yet. In this study, we have realised a DS Schottky diode, which exhibits a steep-slope char…
Graphene-silicon (GS) Schottky junctions have been demonstrated as an efficient architecture for photodetection. However, the response speed of such devices for free space light detection has so far been limited to 10's-100's of kHz for wavelength $λ>$ 500nm. Here, we demonstrate graphene-silicon Schottky junction photodetectors fabricated on a silicon-on-insulator substrate (SOI) with response speeds approaching 1GHz, attributed to the reduction of the photo-active silicon layer thickness to 10$μ$m and with it a suppression of speed-limiting diffusion currents. Graphene-silicon-on-insulator p…
Reverse-biased graphene (Gr)/semiconductor Schottky diodes exhibit much enhanced sensitivity for gas sensing. However, carrier transport across the junctions is not fully understood yet. Here, Gr/SiC, Gr/GaAs and Gr/Si Schottky junctions under reverse-bias are investigated by temperature-dependent current-voltage measurements. A reduction in barrier height with increasing reverse-bias is observed for all junctions, suggesting electric-field enhanced thermionic emission. Further analysis of the field dependence of the reverse current reveals that while carrier transport in Gr/SiC Schottky junct…
In the past decade graphene has been one of the most studied material for several unique and excellent properties. Due to its two dimensional nature, physical and chemical properties and ease of manipulation, graphene offers the possibility of integration with the exiting semiconductor technology for next-generation electronic and sensing devices. In this context, the understanding of the graphene/semiconductor interface is of great importance since it can constitute a versatile standalone device as well as the building-block of more advanced electronic systems. Since graphene was brought to t…
An atomistic insight into potential barrier formation and band bending at the interface between a metal and an n-type semiconductor is achieved by ab initio simulations and model analysis of a prototype Schottky diode, i.e., niobium doped rutile titania in contact with gold (Au/Nb:TiO$_2$). The local Schottky barrier height is found to vary between 0 and 1.26 eV depending on the position of the dopant. The band bending is caused by a dopant induced dipole field between the interface and the dopant site, whereas the pristine Au/TiO$_2$ interface does not show any band bending. These findings op…
We demonstrate electrical injection and detection of spin-polarized electrons in silicon (Si) using epitaxially grown Fe_3Si/Si Schottky-tunnel-barrier contacts. By an insertion of a delta-doped n^+-Si layer (~ 10^19 cm^-3) near the interface between a ferromagnetic Fe_3Si/Si contact and a Si channel (~ 10^15 cm^-3), we achieve a marked enhancement in the tunnel conductance for reverse-bias characteristics of the Fe_3Si/Si Schottky diodes. Using laterally fabricated four-probe geometries with the modified Fe_3Si/Si contacts, we detect nonlocal output signals which originate from the spin accum…
Realizing an optimal Schottky interface of graphene on Si is challenging, as the electrical transport strongly depends on the graphene quality and the fabrication processes. Such interfaces are of increasing research interest for integration in diverse electronic devices as they are thermally and chemically stable in all environments, unlike standard metal/semiconductor interfaces. We fabricate such interfaces with n-type Si at ambient conditions and find their electrical characteristics to be highly rectifying, with minimal reverse leakage current ($<$10$^{-10}$ A) and rectification of more t…
This paper reports on the modulation of Schottky barrier heights (SBH) on three different orientations of $β$-Ga$_2$O$_3$ by insertion of an ultra-thin SiO$_2$ dielectric interlayer at the metal-semiconductor junction, which can potentially lower the Fermi-level pinning (FLP) effect due to metal-induced gap states (MIGS). Pt and Ni metal-semiconductor (MS) and metal-interlayer-semiconductor (MIS) Schottky barrier diodes were fabricated on bulk n-type doped $β$-Ga$_2$O$_3$ single crystal substrates along the (010), (-201) and (100) orientations and were characterized by room temperature current…
Heterostructures of two-dimensional (2D) and three-dimensional (3D) materials form efficient devices for utilizing the properties of both classes of materials. Graphene/silicon (G/Si) Schottky diodes have been studied extensively with respect to their optoelectronic properties. Here, we introduce a method to analyze measured capacitance-voltage data of G/Si Schottky diodes connected in parallel with G/silicon dioxide/Si (GIS) capacitors. We also demonstrate the accurate extraction of the built-in potential ($Φ$$_{bi}$) and the Schottky barrier height from the measurement data independent of th…
Current voltage and Kelvin Probe Force Microscopy (KPFM) measurements were performed on single ZnO nanowires. Measurements are shown to be strongly correlated with the contact behavior, either ohmic or Schottky. The ZnO nanowires were obtained by metallo-organic chemical vapor deposition (MOCVD) and contacted using electronic-beam lithography. Depending on the contact geometry, good quality ohmic contacts (linear I V behavior) or non-linear (diode like) Schottky contacts were obtained. Current voltage and KPFM measurements on both types of contacted ZnO nanowires were performed in order to inv…
We report on the electronic transport properties of multiple-gate devices fabricated from undoped silicon nanowires. Understanding and control of the relevant transport mechanisms was achieved by means of local electrostatic gating and temperature dependent measurements. The roles of the source/drain contacts and of the silicon channel could be independently evaluated and tuned. Wrap gates surrounding the silicide-silicon contact interfaces were proved to be effective in inducing a full suppression of the contact Schottky barriers, thereby enabling carrier injection down to liquid-helium tempe…
Atomically thin MoS2 has recently emerged as a very attractive material for nanoscale optoelectronic devices. While n-type transport in MoS2 devices has been demonstrated, hole conduction has been more challenging. Here we show work-function engineering to be an effective approach for controlling the polarity of MoS2 devices. Gated multi-layer MoS2 transistors with Au source/drain contacts exhibit n-type operation, while those with Pd contacts are shown to have p-type behavior. Devices with one Au and one Pd contact exhibit asymmetric ambipolar behavior and diode characteristics over a wide ra…
Realizing both ultra-low breakdown voltage and ultra-high gain has been one of the major challenges in the development of high-performance avalanche photodetector. Here, we report that an ultra-high avalanche gain of 3*10^5 can be realized in the graphite/InSe Schottky photodetector at a breakdown voltage down to 5.5 V. Remarkably, the threshold breakdown voltage can be further reduced down to 1.8 V by raising the operating temperature, approaching the theoretical limit of 1.5E_g/e with E_g the band gap of semiconductor. We develop a two-dimensional impact ionization model and uncover that obs…
A low Schottky barrier height (SBH) at source/drain contact is essential for achieving high drive current in atomic layer MoS2 channel based field-effect transistors. Approaches such as choosing metals with appropriate work functions and chemical doping are employed previously to improve the carrier injection from the contact electrodes to the channel and to mitigates the SBH between the MoS2 and metal. Recent experiments demonstrate significant SBH reduction when graphene layer is inserted between metal slab (Ti and Ni) and MoS2. However, the physical or chemical origin of this phenomenon is …
A Schottky diode integrated into a terahertz quantum cascade laser waveguide couples directly to the internal laser fields. In a multimode laser, the diode response is correlated with both the instantaneous power and the coupling strength to the diode of each lasing mode. Measurements of the rectified response of diodes integrated in two quantum cascade laser cavities at different locations indicate that the relative diode position strongly influences the laser-diode coupling.
Magnetic $p$-$n$ junction diodes are fabricated to investigate spin-polarized electron transport. The injection of spin-polarized electrons in a semiconductor is achieved by driving a current from a ferromagnetic injector (Fe), into a bulk semiconductor ($n$-GaAs) via schottky contact. For detection, a diluted magnetic semiconductor ($p$-GaMnAs) layer is used. Clear magnetoresistance was observed only when a high forward bias was applied across the $p$-$n$ junction.
Ballistic electron emission microscopy (BEEM) was performed to obtain nanoscale current versus bias characteristics of non-epitaxial Au on p-type GaAs in order to accurately measure the local Schottky barrier height. Hole injection BEEM data was averaged from thousands of spectra for various metal film thicknesses and then used to determine the attenuation length of the energetic charge carriers as a function of tip bias. We report the marked increase in attenuation length at biases near the Schottky barrier, providing evidence for the existence of coherent BEEM currents in Schottky diodes. Th…
MoS2 is a layered two-dimensional material with strong spin-orbit coupling and long spin lifetime, which is promising for electronic and spintronic applications. However, because of its large band gap and small electron affinity, a considerable Schottky barrier exists between MoS2 and contact metal, hindering the further study of spin transport and spin injection in MoS2. Although substantial progress has been made in improving device performance, the existence of metal-semiconductor Schottky barrier has not yet been fully understood. Here, we investigate permalloy (Py) contacts to both multil…
We report the fabrication of low-leakage rectifying Pt and Au Schottky diodes and Au-gated metal-semiconductor field effect transistors (MESFETs) on n-type SrTiO3 thin films grown by hybrid molecular beam epitaxy. In agreement with previous studies, we find that compared to Pt, Au provides a higher Schottky barrier height with SrTiO3. As a result of the large dielectric constant of SrTiO3 and the large Schottky barrier height of Au, the Au-gated MESFETs are able to modulate ~1.6 x 1014 cm-2 electron density, the highest modulation yet achieved using metal gates in any material system. These ME…
In this paper, we report a new 4H-SiC Lateral Dual Sidewall Schottky (LDSS) rectifier on a highly doped drift layer consisting of a high-barrier sidewall Schottky contact on top of the low-barrier Schottky contact. Using two-dimensional device simulation, the performance of the proposed device has been evaluated in detail by comparing its characteristics with those of the compatible Lateral Conventional Schottky (LCS) and Lateral Trench Sidewall Schottky (LTSS) rectifiers on 4H-SiC. From our simulation results, it is observed that the proposed LDSS rectifier acts as a low-barrier LTSS rectifie…
Armchair nanotubes of MoS2 and WS2 offer a sizeable band gap, with the advantage of a one dimensional (1D) electronic material, but free from edge roughness and thermodynamic instability of nanoribbons. Use of such semiconducting MX2 (MoS2, WS2) armchair nanotubes (NTs) in conjunction with metallic carbon nanotubes (CNT) could prove useful for nanoelectronics and photonics applications. In this work atomistic simulations of MoS2 NT-CNT and WS2 NT-CNT junctions are carried out to study the physics of such junctions. With density functional theory (DFT) we study the carrier density distribution,…
We demonstrate tunable Schottky barrier height and record photo-responsivity in a new-concept device made of a single-layer CVD graphene transferred onto a matrix of nanotips patterned on n-type Si wafer. The original layout, where nano-sized graphene/Si heterojunctions alternate to graphene areas exposed to the electric field of the Si substrate, which acts both as diode cathode and transistor gate, results in a two-terminal barristor with single-bias control of the Schottky barrier. The nanotip patterning favors light absorption, and the enhancement of the electric field at the tip apex impr…
In 2D-semiconductor-based field-effect transistors and optoelectronic devices, metal-semiconductor junctions are one of the crucial factors determining device performance. The Fermi-level (FL) pinning effect, which commonly caused by interfacial gap states, severely limits the tunability of junction characteristics, including barrier height and contact resistance. A tunneling contact scheme has been suggested to address the FL pinning issue in metal-2D-semiconductor junctions, whereas the experimental realization is still elusive. Here, we show that an oxidized-monolayer-enabled tunneling barr…
We report the fabrication of both n-type and p-type WSe2 field effect transistors with hexagonal boron nitride passivated channels and ionic-liquid (IL)-gated graphene contacts. Our transport measurements reveal intrinsic channel properties including a metal-insulator transition at a characteristic conductivity close to the quantum conductance e2/h, a high ON/OFF ratio of >107 at 170 K, and large electron and hole mobility of ~200 cm2V-1s-1 at 160 K. Decreasing the temperature to 77 K increases mobility of electrons to ~330 cm2V-1s-1 and that of holes to ~270 cm2V-1s-1. We attribute our abilit…
We propose a hybrid device consisting of a graphene/silicon (Gr/Si) Schottky diode in parallel with a Gr/SiO2/Si capacitor for high-performance photodetection. The device, fabricated by transfer of commercial graphene on low-doped n-type Si substrate, achieves a photoresponse as high as 3 AW^(-1) and a normalized detectivity higher than 3.5 10^12 cmHz^(1/2) W^(-1) in the visible range. The device exhibits a photocurrent exceeding the forward current, because photo-generated minority carriers, accumulated at Si/SiO2 interface of the Gr/SiO2/Si capacitor, diffuse to the Gr/Si junction. We show t…
Due to their wide band gaps, III-N materials can exhibit behaviors ranging from the semiconductor class to the dielectric class. Through an analogy between a Metal/AlGaN/AlN/GaN diode and a MOS contact, we make use of this dual nature and show a direct path to capture the energy band diagram of the nitride system. We then apply transparency calculations to describe the forward conduction regime of a III-N heterojunction diode and demonstrate it realizes a tunnel diode, in contrast to its regular Schottky Barrier Diode designation. Thermionic emission is ruled out and instead, a coherent electr…
The performance of nanoscale electronic devices based on a two-three dimensional (2D-3D) interface is significantly affected by the electrical contacts that interconnect these materials with external circuitry. This work investigates charge transport effects at the 2D-3D ohmic contact coupled with the thermionic injection model for graphene/Si Schottky junction. Here, w e focus on the intrinsic properties of graphene-metal contacts, paying particular attention to the nature of the contact failure mechanism under high electrical stress. According to our findings, severe current crowding (CC) ef…
Contact resistance and thermal degradation of metal-silicon contacts are challenges in nanoscale CMOS as well as in power device applications. Titanium silicide (TiSi) contacts are commonly used metal-silicon contacts, but are known to diffuse into the active region under high current stress. In this paper we show that a graphenic carbon (C) contact deposited on n-type silicon (C-Si) by CVD, has the same low Schottky barrier height of 0.45 eV as TiSi, but a much improved reliability against high current stress. The C-Si contact is over 100 million times more stable against high current stress …
Graphene/silicon (G/Si) heterojunction based devices have been demonstrated as high responsivity photodetectors that are potentially compatible with semiconductor technology. Such G/Si Schottky junction diodes are typically in parallel with gated G/silicon dioxide (SiO$_2$)/Si areas, where the graphene is contacted. Here, we utilize scanning photocurrent measurements to investigate the spatial distribution and explain the physical origin of photocurrent generation in these devices. We observe distinctly higher photocurrents underneath the isolating region of graphene on SiO$_2$ adjacent to the…
We propose a low-temperature thermal rectifier consisting of a chain of three tunnel-coupled normal metal electrodes. We show that a large heat rectification is achievable if the thermal symmetry of the structure is broken and the central island can release energy to the phonon bath. The performance of the device is theoretically analyzed and, under the appropriate conditions, temperature differences up to $\sim$ 200 mK between the forward and reverse thermal bias configurations are obtained below 1 K, corresponding to a rectification ratio $\mathcal{R} \sim$ 2000. The simplicity intrinsic to …
