RIS-Assisted Coverage Enhancement in Millimeter-Wave Cellular Networks
Mahyar Nemati, Jihong Park, Jinho Choi
备注：
Accepted in IEEE ACCESS, Copyright (c) 2015 IEEE. Personal use of this material is permitted. However, permission to use this material for any other purposes must be obtained from the IEEE by sending a request to pubs-permissions@ieee.org
The use of millimeter-wave (mmWave) bandwidth is one key enabler to achieve the high data rates in the fifth-generation (5G) cellular systems. However, mmWave signals suffer from significant path loss due to high directivity and sensitivity to blockages, limiting its adoption within small-scale deployments. To enhance the coverage of mmWave communication in 5G and beyond, it is promising to deploy a large number of reconfigurable intelligent surfaces (RISs) that passively reflect mmWave signals towards desired directions. With this motivation, in this work we study the coverage of an RIS-assisted large-scale mmWave cellular network using stochastic geometry, and derive the peak reflection power expression of an RIS and the downlink signal-to-interference ratio (SIR) coverage expression in closed forms. These analytic results clarify the effectiveness of deploying RISs in the mmWave SIR coverage enhancement, while unveiling the major role of the density ratio between active base stations (BSs) and passive RISs. Furthermore, the results show that deploying passive reflectors is as effective as equipping BSs with more active antennas in the mmWave coverage enhancement. Simulation results confirm the tightness of the closed form expressions, corroborating our major findings based on the derived expressions.
In this paper, using the stochastic geometry, we develop a tractable uplink modeling framework for the outage probability of both the single and multi-tier millimeter wave (mmWave) cellular networks. Each tier's mmWave base stations (BSs) are randomly located and they have particular spatial density, antenna gain, receiver sensitivity, blockage parameter and pathloss exponents. Our model takes account of the maximum power limitation and the per-user power control. More specifically, each user, which could be in line-of-sight (LOS) or non-LOS to its serving mmWave BS, controls its transmit powe…
We study the distribution of the interference power in a millimeter wave (mmWave) cellular network. Such interference is random and highly dependent on the employed transmission technique, as well as the varying channel conditions and the varying association between users and base stations. Traditional networks at lower frequencies usually employ omnidirectional transmission which creates an (almost) equal amount of interference in any direction. MmWave networks, however, must employ directional beamforming transmission in order to compensate for the high path loss in mmWave frequency bands. T…
Massive connectivity and low latency are two important challenges for the Internet of Things (IoT) to achieve the Quality of Service (QoS) provisions required by the numerous devices it is designed to service. Motivated by these challenges, in the paper we introduce a new millimeter-wave non-orthogonal multiple access (mmWave-NOMA) transmission scheme designed for cellular machine-to-machine (M2M) communication systems for IoT applications. It consists of one base station (BS) and numerous multiple machine type communication (MTC) devices operating in a cellular communication environment. We c…
To achieve high data rates defined in 5G, the use of millimeter-waves and massive-MIMO are indispensable. To benefit from these technologies, an accurate estimation of the channel parameters is crucial. We propose a novel two-stage algorithm for channel parameters estimation. In the first stage, coarse estimation is accomplished by applying parameter estimation via interpolation based on DFT grid (PREIDG) with a fixed look-up table (LUT), while the second stage refines the estimates by means of the space-alternating generalized expectation maximization (SAGE) algorithm. The two-stage algorithm…
Initial access (IA) is a fundamental physical layer procedure in cellular systems where user equipment (UE) detects nearby base station (BS) as well as acquire synchronization. Due to the necessity of using antenna array in millimeter-wave (mmW) IA, the channel spatial information can also be inferred. The state-of-the-art directional IA (DIA) uses sector sounding beams with limited angular resolution, and thus requires additional dedicated radio resources, access latency and overhead for refined beam training. To remedy the problem of access latency and overhead in DIA, this work proposes to …
This paper studies energy efficiency maximization in device-to-device (D2D) communications underlaying cellular networks in millimeter-wave (mm-wave) band. A stochastic geometry framework has been used to extract the results. First, cellular and D2D users are modeled by independent homogeneous Poisson point process; then, exact expressions for successful transmission probability of D2D and cellular users have been derived. Furthermore, the average sum rate and energy efficiency for a typical D2D scenario have been presented. An optimization problem subject to transmission power and quality of …
Future 5G communication systems require more demanding performances than the existing cellular communication systems, e.g., 10 to 100 Mbps user data rate and much larger cellular spectrum efficiency. The well-used multiple access methods like CDMA and OFDMA are hard to achieve these challenging requirements simultaneously even with advanced signal processing techniques and base station cooperation. Recently, massive MIMO has gain much attention since it provides large signal dimensions that can be used to improve future 5G cellular system performance. This tutorial paper describes a recently p…
Millimeter Wave (mmWave) communication systems can provide high data rates, but the system performance may degrade significantly due to interruptions by mobile blockers such as humans or vehicles. A high frequency of interruptions and lengthy blockage durations will degrade the quality of the user's experience. A promising solution is to employ the macrodiversity of Base Stations (BSs), where the User Equipment (UE) can handover to other available BSs if the current serving BS gets blocked. However, an analytical model to evaluate the system performance of dynamic blockage events in this setti…
Integrated access and backhaul (IAB) networks have the potential to provide high data rate in both access and backhaul networks by sharing the same spectrum. Due to the dense deployment of small base stations (SBSs), IAB networks connect SBSs to the core network in a wireless manner without the deployment of high-cost optical fiber. As large spectrum is available in mmWave bands and high data rate is achieved by using directional beamforming, the access and backhaul links can be integrated in the same frequency band while satisfying quality-of-service constraints. In this work, we optimize the…
In this paper we present the first comprehensive study of the multi-user capacity of millimeter-wave (mm-wave) urban cellular networks, using site-specific ray-tracing propagation data and realistic antenna array patterns. We compare the performance of TDMA and SDMA (time and spatial division multiple access, respectively) for diverse network scenarios and antenna configurations. We propose a greedy heuristic algorithm to solve the network-wide directional link allocation problem, thereby estimating the achievable capacity and coverage of multi-user mm-wave networks. Our results show that inte…
We study whether realistic 5G mm-wave cellular networks would cause harmful out-of-band interference to weather satellites sensing in the 23.8 GHz band. We estimate uplink and downlink interference from a single interferer and a network of interferers in New York City, using real 3D building data and realistic antenna patterns. We perform detailed ray-tracing propagation simulations, for locations of the MetOp-B weather satellite and its scanning orientations and ground interferer antenna orientations for representative urban cell sites. In addition to the ITU-R threshold of -136 dBm/200 MHz, …
Fifth-generation (5G) cellular systems are likely to operate in the centimeter-wave (3-30 GHz) and millimeter-wave (30-300 GHz) frequency bands, where a vast amount of underutilized bandwidth exists world-wide. To assist in the research and development of these emerging wireless systems, a myriad of measurement studies have been conducted to characterize path loss in urban environments at these frequencies. The standard theoretical free space (FS) and Stanford University Interim (SUI) empirical path loss models were recently modified to fit path loss models obtained from measurements performed…
The use of Millimeter-wave (mmWave) spectrum in cellular communications has recently attracted growing interest to support the expected massive increase in traffic demands. However, the high path-loss at mmWave frequencies poses severe challenges. In this paper, we analyze the potential coverage gains of using unmanned aerial vehicles (UAVs), as hovering relays, in integrated access and backhaul (IAB) mmWave cellular scenarios. Specifically, we utilize the WinProp software package, which employs ray tracing methodology, to study the propagation characteristics of outdoor mmWave channels at 30 …
Modern cellular systems rely increasingly on simultaneous communication in multiple discontinuous bands for macro-diversity and increased bandwidth. Multi-frequency communication is particularly crucial in the millimeter wave (mmWave) and Terahertz (THz) frequencies, as these bands are often coupled with lower frequencies for robustness. Evaluation of these systems requires statistical models that can capture the joint distribution of the channel paths across multiple frequencies. This paper presents a general neural network based methodology for training multi-frequency double directional sta…
Unmanned aerial vehicles (UAVs) have found widespread commercial, civilian, and military applications. Wireless communication has always been one of the core technologies for UAV. However, the communication capacity is becoming a bottleneck for UAV to support more challenging application scenarios. The heavily-occupied sub-6 GHz frequency band is not sufficient to meet the ultra high-data-traffic requirements. The utilization of the millimeter-wave (mmWave) frequency bands is a promising direction for UAV communications, where large antenna arrays can be packed in a small area on the UAV to pe…
We consider the channel estimation problem in point-to-point reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) MIMO systems. By exploiting the low-rank nature of mmWave channels in the angular domains, we propose a non-iterative Two-stage RIS-aided Channel Estimation (TRICE) framework, where every stage is formulated as a multidimensional direction-of-arrival (DOA) estimation problem. As a result, our TRICE framework is very general in the sense that any efficient multidimensional DOA estimation solution can be readily used in every stage to estimate the associated channe…
Reconfigurable intelligent surface (RIS) has recently emerged as a promising paradigm for future cellular networks. Specifically, due to its capability in reshaping the propagation environment, RIS was introduced to address the blockage issue in millimeter Wave (mmWave) or even Terahertz (THz) communications. The deployment of RIS, however, complicates the system architecture and poses a significant challenge for beam training (BT)/ beam alignment (BA), a process that is required to establish a reliable link between the transmitter and the receiver. In this article, we first review several sta…
In the next generations of cellular communication networks, higher density of base stations and higher frequency bands will be adopted. If being reflected by targets, the communication signal also brings information of the targets, in addition to the communication messages, to the receivers. In this paper, it is proposed to leverage the reflected communication signals to reconstruct an image of the environment. Due to the analogy to traditional synthetic aperture radar (SAR) and inverse SAR (ISAR), the principles of SAR and ISAR, namely the tomography via Fourier transformation, are adopted wi…
Reconfigurable intelligent surface (RIS) has been regarded as a revolutionary and promising technology owing to its powerful feature of adaptively shaping wireless propagation environment. However, as a frequency-selective device, the RIS can only effectively provide tunable phase-shifts for signals within a certain frequency band. Thus, base-station (BS)-RIS-user association is an important issue to maximize the efficiency and ability of the RIS in cellular networks. In this paper, we consider a RIS-aided cellular network and aim to maximize the sum-rate of downlink transmissions by designing…
Simultaneously transmitting (refracting) and reflecting reconfigurable intelligent surfaces (STAR-RISs) have been recently identified to improve the spectrum/energy efficiency and extend the communication range. However, their potential for enhanced concurrent indoor and outdoor localization has not yet been explored. In this paper, we study the fundamental limits, i.e., the Cramér Rao lower bounds (CRLBs) via Fisher information analyses, on the three-dimensional (3D) localization performance with a STAR-RIS at millimeter wave frequencies. The effect of the power splitting between refraction a…
Meta distribution is a fine-grained unified performance metric that enables us to evaluate the {reliability and latency} of next generation wireless networks, in addition to the conventional coverage probability. In this paper, using stochastic geometry tools, we develop a systematic framework to characterize the meta distributions of the downlink signal-to-interference-ratio (SIR)/signal-to-noise-ratio (SNR) and data rate of a typical device in a cellular network with coexisting sub-6GHz and millimeter wave (mm-wave) spectrums. Macro base-stations (MBSs) transmit on sub-6GHz channels (which w…
In this work, we consider both channel estimation and reflection design problems in point-to-point reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) MIMO communication systems. First, we show that by exploiting the low-rank nature of mmWave MIMO channels, the received training signals can be written as a low-rank multi-way tensor admitting a canonical polyadic CP decomposition. Utilizing such a structure, a tensor-based RIS channel estimation method (termed TenRICE) is proposed, wherein the tensor factor matrices are estimated using an alternating least squares method. Us…
In this letter, we investigate the secrecy rate of an reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) system with hardware limitations. Compared to the RIS-aided systems in most existing works, we consider the case of the RIS-aided mmWave system with low-resolution digital-to-analog converters (LDACs). We formulate a secrecy rate maximization problem hardware constraints. Then by optimizing the RIS phase shift and the transmit beamforming to maximize the secrecy rate. Due to the nonconvexity of the problem, the formulated problem is intractable. To handle the problem, a…
Cellular-connected unmanned aerial vehicles (UAVs) are recently getting significant attention due to various practical use cases, e.g., surveillance, data gathering, purchase delivery, among other applications. Since UAVs are low power nodes, energy and spectral efficient communication is of paramount importance. To that end, multiple access (MA) schemes can play an important role in achieving high energy efficiency and spectral efficiency. In this work, we introduce rate-splitting MA (RSMA) and non-orthogonal MA (NOMA) schemes in a cellular-connected UAV network. In particular, we investigate…
A fundamental challenge for millimeter wave (mmWave) communications lies in its sensitivity to the presence of blockages, which impact the connectivity of the communication links and ultimately the reliability of the entire network. In this paper, we analyze a reconfigurable intelligent surface (RIS)-aided mmWave communication system for enhancing the network reliability and connectivity in the presence of random blockages. To enhance the robustness of hybrid analog-digital beamforming in the presence of random blockages, we formulate a stochastic optimization problem based on the minimization…
Future cellular systems will make use of millimeter wave (mmWave) frequency bands. Many users in these bands are located indoors, i.e., inside buildings, homes, and offices. Typical building material attenuations in these high frequency ranges are of interest for link budget calculations. In this paper, we report on a collaborative measurement campaign to find the attenuation of several typical building materials in three potential mmWave bands (28, 73, 91 GHz). Using directional antennas, we took multiple measurements at multiple locations using narrow-band and wide-band signals, and averaged…
Channel estimation in the RIS-aided massive multiuser multiple-input single-output (MU-MISO) wireless communication systems is challenging due to the passive feature of RIS and the large number of reflecting elements that incur high channel estimation overhead. To address this issue, we propose a novel cascaded channel estimation strategy with low pilot overhead by exploiting the sparsity and the correlation of multiuser cascaded channels in millimeter-wave massive MISO systems. Based on the fact that the phsical positions of the BS, the RIS and users may not change in several or even tens of …
Power consumption is a key challenge in millimeter wave (mmWave) receiver front-ends, due to the need to support high dimensional antenna arrays at wide bandwidths. Recently, there has been considerable work in developing low-power front-ends, often based on low-resolution ADCs and low-power mixers. A critical but less studied consequence of such designs is the relatively low-dynamic range which in turn exposes the receiver to adjacent carrier interference and blockers. This paper provides a general mathematical framework for analyzing the performance of mmWave front-ends in the presence of ou…
In this letter, we investigate the uplink of a reconfigurable intelligent surface (RIS)-aided millimeter-wave (mmWave) multi-user system. In the considered system, however, problems with hardware cost and power consumption arise when massive antenna arrays coupled with power-demanding analog-to-digital converters (ADCs) are employed. To account for practical hardware complexity, we consider that the access point (AP) is equipped with resolution-adaptive analog-to-digital converters (RADCs). We maximize the achievable rate under hardware constraints by jointly optimizing the ADC quantization bi…
With the increasing adoption of millimeter-waves (mmWave) over cellular networks, outdoor-to-indoor (O2I) communication has been one of the challenging research problems due to high penetration loss of buildings. To address this, we investigate the practicability of utilizing reconfigurable intelligent surfaces (RISs) for assisting such O2I communication. We propose a new notion of prefabricated RIS-empowered wall consisting of a large number of chipless radio frequency identification (RFID) sensors. Each sensor maintains its own bank of delay lines. These sensors which are built within the bu…
Physical layer security (PLS) techniques can help to protect wireless networks from eavesdropper attacks. In this paper, we consider the authentication technique that uses fingerprint embedding to defend 5G cellular networks with unmanned aerial vehicle (UAV) systems from eavesdroppers and intruders. Since the millimeter wave (mmWave) cellular networks use narrow and directional beams, PLS can take further advantage of the 3D spatial dimension for improving the authentication of UAV users. Considering a multi-user mmWave cellular network, we propose a power allocation technique that jointly ta…
Fifth generation (5G) cellular standards are set to utilize millimeter wave (mmWave) frequencies, which enable data speeds greater than 10 Gbps and sub-centimeter localization accuracy. These capabilities rely on accurate estimates of the channel parameters, which we define as the angle of arrival, angle of departure, and path distance for each path between the transmitter and receiver. Estimating the channel parameters in a computationally efficient manner poses a challenge because it requires estimation of parameters from a high-dimensional measurement -- particularly for multi-carrier syste…
We consider the problem of channel estimation and joint active and passive beamforming for reconfigurable intelligent surface (RIS) assisted millimeter wave (mmWave) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems. We show that, with a well-designed frame-based training protocol, the received pilot signal can be organized into a low-rank third-order tensor that admits a canonical polyadic decomposition (CPD). Based on this observation, we propose two CPD-based methods for estimating the cascade channels associated with different subcarriers. The …
Millimeter-wave communications is the most promising technology for next-generation cellular wireless systems, thanks to the large bandwidth available compared to sub-6 GHz networks. Nevertheless, communication at these frequencies requires narrow beams via massive MIMO and beamforming to overcome the strong signal attenuation, and thus precise beam-alignment between transmitter and receiver is needed. The resulting signaling overhead may become a severe impairment, especially in mobile networks with high users density. Therefore, it is imperative to optimize the beam-alignment protocol to min…
The future wireless communication system faces the bottleneck of the shortage of traditional spectrum resources and the explosive growth of the demand for wireless services. Millimeter-wave communication with spectral resources has become an effective choice for the next generation of wireless broadband cellular communication. However, the transmission path loss is large and oxygen and water molecules absorb Characteristics such as seriousness have brought great challenges to millimeter wave communication, and it is necessary to seek a technical approach different from low-frequency wireless c…
Millimeter wave (mmWave) communication links for 5G cellular technology require high beamforming gain to overcome channel impairments and achieve high throughput. While much work has focused on estimating mmWave channels and designing beamforming schemes, the time dynamic nature of mmWave channels quickly renders estimates stale and increases sounding overhead. We model the underlying time dynamic state space of mmWave channels and design sounding beamformers suitable for tracking in a Kalman filtering framework. Given an initial channel estimate, filtering efficiently leads to refined estimat…
Millimeter-wave (mmWave) multiple-input multiple-output (MIMO) system for the fifth generation (5G) cellular communications can also enable single-anchor positioning and object tracking due to its large bandwidth and inherently high angular resolution. In this paper, we introduce the newly invented concept, large intelligent surface (LIS), to mmWave positioning systems, study the theoretical performance bounds (i.e., Cramér-Rao lower bounds) for positioning, and evaluate the impact of the number of LIS elements and the value of phase shifters on the position estimation accuracy compared to the…
Use of low resolution analog to digital converters (ADCs) is an effective way to reduce the high power consumption of millimeter wave (mmWave) receivers. In this paper, a receiver with low resolution ADCs based on adaptive thresholds is considered in downlink mmWave communications in which the channel state information is not known a-priori and acquired through channel estimation. A performance comparison of low-complexity algorithms for power and ADC allocation among transmit and receive terminals, respectively, is provided. Through simulation of practical mmWave cellular networks, it is show…
Channel estimation in reconfigurable intelligent surface (RIS) assisted multiple input multiple output (MIMO) communication systems is challenging as pilots cannot be decoded at or transmitted from a RIS with only passive elements. We assume an angular model for the line-of-sight channel between the user equipment (UE) and the RIS and between the RIS and the base station (BS) with no direct path between the UE and BS. In this letter, assuming that we can compute the RIS-BS channel (up to a complex path gain) from their known locations, we first discuss the ambiguity involved in estimating the …
Reconfigurable intelligent surface (RIS) is a revolutionary technology for sixth-generation (6G) networks owing to its ability to manipulate wireless environments. As a frequency-selective device, RIS can only effectively shape the propagation of signals within a certain frequency band. Due to this frequency-selective property, the deployment of RIS in cellular networks will introduce a complicated base station (BS)-RIS-user association issue since adjacent BSs operate at different frequency bands. In this paper, with the consideration of the frequency-selective characteristics of RIS, we aim …
The growth in wireless traffic and mobility of devices have congested the core network significantly. This bottleneck, along with spectrum scarcity, made the conventional cellular networks insufficient for the dissemination of large contents. In this paper, we propose a novel scheme that enables efficient initialization of CCN-based D2D networks in the mmWave band through addressing decentralized D2D peer association and antenna beamwidth selection. The proposed scheme considers mmWave characteristics such as directional communication and blockage susceptibility. We propose a heuristic peer as…
This work discusses the optimal reconfigurable intelligent surface placement in highly-directional millimeter wave links. In particular, we present a novel system model that takes into account the relationship between the transmission beam footprint at the RIS plane and the RIS size. Subsequently, based on the model we derive the end-to-end expression of the received signal power and, furthermore, provide approximate closed-form expressions in the case that the RIS size is either much smaller or at least equal to the transmission beam footprint. Moreover, building upon the expressions, we deri…
The conventional outage in wireless communication systems is caused by the deterioration of the wireless communication link, i.e., the received signal power is less than the minimum received signal power. Is there a possibility that the outage occurs in wireless communication systems with a good channel state? Based on both communication and heat transfer theories, a power-consumption outage in the wireless communication between millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) base stations (BSs) and smartphones has been modeled and analyzed. Moreover, the total transmiss…
Millimeter wave (mmWave) communication is expected to play an important role in next generation cellular networks, aiming to cope with the bandwidth shortage affecting conventional wireless carriers. Using side-information has been proposed as a potential approach to accelerate beam selection in mmWave massive MIMO (m-MIMO) communications. However, in practice, such information is not error-free, leading to performance degradation. In the multi-user case, a wrong beam choice might result in irreducible inter-user interference at the base station (BS) side. In this paper, we consider location-a…
The evolving Fifth Generation New Radio (5G-NR) cellular standardization efforts at the Third Generation Partnership Project (3GPP) brings into focus a number of questions on relevant research problems in physical-layer communications for study by both academia and industry. To address this question, we show that the peak download data rates for both WiFi and cellular systems have been scaling exponentially with time over the last twenty five years. While keeping up with the historic cellular trends will be possible in the near-term with a modest bandwidth and hardware complexity expansion, ev…
The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challenging due to their unfavorable propagation characteristics. Hence, initiating mmWave spectrum sharing requires the RIS to further assist in improving the QoS over mmWave bands without jeopardizing spect…
Reconfigurable Intelligent Surfaces (RISs) are one of the key emerging 6th Generation (6G) technologies that are expected to improve the link budgets between transmitters and receivers by adding artificial propagation paths. In such re-configured propagation environment, Downlink (DL) Multi-User Multi-Input Multi-Output (MU-MIMO) brings capacity improvement to cellular networks. It benefits from the spatial dimension offered by MIMO systems to enable simultaneous transmission of independent data streams to multiple users on the same radio resources by applying appropriate Beamforming (BF) sche…
