Development of the detector simulation framework for the Wideband Hybrid X-ray Imager onboard FORCE
Hiromasa Suzuki, Tsubasa Tamba, Hirokazu Odaka, Aya Bamba, Koichi Hagino, Ayaki Takeda, Koji Mori, Takahiro Hida, Masataka Yukumoto, Yusuke Nishioka, Takeshi G. Tsuru
备注：
7 pages, 5 figures, proceedings of the "12th International "Hiroshima" Symposium on the Development and Application of Semiconductor Tracking Detectors (HSTD12)", accepted for publication in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
FORCE is a Japan-US space-based astronomy mission for an X-ray imaging spectroscopy in an energy range of 1--80 keV. The Wideband Hybrid X-ray Imager (WHXI), which is the main focal plane detector, will use a hybrid semiconductor imager stack composed of silicon and cadmium telluride (CdTe). The silicon imager will be a certain type of the silicon-on-insulator (SOI) pixel sensor, named the X-ray pixel (XRPIX) series. Since the sensor has a small pixel size (30--36 $μ$m) and a thick sensitive region (300--500 $μ$m), understanding the detector response is not trivial and is important in order to optimize the camera design and to evaluate the scientific capabilities.
We have developed a framework to simulate observations of celestial sources with semiconductor sensors. Our simulation framework was tested and validated by comparing our simulation results to laboratory measurements using the XRPIX 6H sensor. The simulator well reproduced the measurement results with reasonable physical parameters of the sensor including an electric field structure, a Coulomb repulsion effect on the carrier diffusion, and arrangement of the degraded regions. This framework is also applicable to future XRPIX updates including the one which will be part of the WHXI, as well as various types of semiconductor sensors.
The AstroSat satellite is designed to make multi-waveband observations of astronomical sources and the Cadmium Zinc Telluride Imager (CZTI) instrument of AstroSat covers the hard X-ray band. CZTI has a large area position sensitive hard X-ray detector equipped with a Coded Aperture Mask, thus enabling simultaneous background measurement. Ability to record simultaneous detection of ionizing interactions in multiple detector elements is a special feature of the instrument and this is exploited to provide polarization information in the 100 - 380 keV region. CZTI provides sensitive spectroscopic …
The Hard X-ray Imager (HXI) onboard Hitomi (ASTRO-H) is an imaging spectrometer covering hard X-ray energies of 5-80 keV. Combined with the hard X-ray telescope, it enables imaging spectroscopy with an angular resolution of $1^\prime.7$ half-power diameter, in a field of view of $9^\prime\times9^\prime$. The main imager is composed of 4 layers of Si detectors and 1 layer of CdTe detector, stacked to cover wide energy band up to 80 keV, surrounded by an active shield made of BGO scintillator to reduce the background. The HXI started observations 12 days before the Hitomi loss, and successfully …
Ultraviolet Imaging Telescope (UVIT) is one of the payloads onboard AstroSat, India's first multi-wavelength Astronomy mission. UVIT is primarily designed to make high resolution images in wide field, in three wavelength channels simultaneously: FUV (130 - 180 nm), NUV (200 - 300 nm) and VIS (320 - 550 nm). The intensified imagers used in UVIT suffer from distortions, and a correction is necessary for these to achieve good astrometry. In this article we describe the methodology and calculations used to estimate the distortions in ground calibrations.
Initial radiometric calibration of the High-Resolution EUV Imager ($\textrm{HRI}_\textrm{EUV}$) of the Extreme Ultraviolet Imager (EUI) instrument onboard Solar Orbiter
Royal Observatory of Belgium（比利时皇家天文台）；Institut d’Astrophysique Spatiale, CNRS, Univ. Paris-Sud, Université Paris-Saclay（空间天体物理研究所，法国国家科学研究中心，巴黎南大学，巴黎萨克雷大学）；European Commission, DG Energy, Directorate D: Nuclear Energy, Safety and ITER（欧盟委员会，能源总司，D局：核能、安全与ITER）；Laboratoire Charles Fabry, Institut d’Optique Graduate School, Université Paris-Saclay（夏尔·法布里实验室，高等光学研究院，巴黎萨克雷大学）；Physikalisch-Meteorologisches Observatorium Davos, World Radiation Center（达沃斯物理气象观测站，世界辐射中心）；UCL-Mullard Space Science Laboratory（伦敦大学学院-穆拉德空间科学实验室）；Centre Spatial de Liège, Université de Liège（列日航天中心，列日大学）；Max Planck Institute for Solar System Research（马克斯·普朗克太阳系研究所）
The Helioseismic and Magnetic Imager (HMI) instrument is a major component of NASA's Solar Dynamics Observatory (SDO) spacecraft. Since beginning normal science operations on 1 May 2010, HMI has operated with remarkable continuity, e.g. during the more than five years of the SDO prime mission that ended 30 September 2015, HMI collected 98.4% of all possible 45-second velocity maps; minimizing gaps in these full-disk Dopplergrams is crucial for helioseismology. HMI velocity, intensity, and magnetic-field measurements are used in numerous investigations, so understanding the quality of the data …
The extreme ultraviolet (EUV) observations are widely used in solar activity research and space weather forecasting since they can observe both the solar eruptions and the source regions of the solar wind. Flat field processing is indispensable to remove the instrumental non-uniformity of a solar EUV imager in producing high-quality scientific data from original observed data. Fengyun-3E (FY-3E) is a meteorological satellite operated in Sun-synchronous orbit, and the routine EUV imaging data from the Solar X-ray and Extreme Ultraviolet Imager (X-EUVI) onboard FY-3E has the characteristics of c…
The imaging and spectral performance of CdTe double-sided strip detectors (CdTe-DSDs) was evaluated for the ASTRO-H mission. The charcterized CdTe-DSDs have a strip pitch of 0.25 mm, an imaging area of 3.2 cm$\times$3.2 cm and a thickness of 0.75 mm. The detector was successfully operated at a temperature of $-20^\circ$C and with an applied bias voltage of 250 V. By using two-strip events as well as one-strip events for the event reconstruction, a good energy resolution of 2.0 keV at 59.5 keV and a sub-strip spatial resolution was achieved. The hard X-ray and gamma-ray response of CdTe-DSDs is…
Responses of the X-ray spectrometer/imager STIX onboard Solar Orbiter
University of Applied Sciences and Arts Northwestern Switzerland (FHNW)（西北瑞士应用科学与艺术大学）；The Physical Meteorological Observatory and World Radiation Center (PMOD/WRC)（物理气象观测站与世界辐射中心）；IRFU, CEA, Université Paris-Saclay and Université Paris Diderot, AIM, Sorbonne Paris Cité, CEA, CNRS（IRFU、CEA、巴黎萨克雷大学和巴黎第七大学、AIM、索邦巴黎西大、CEA、CNRS）
LUCI (Lagrange eUv Coronal Imager) is a solar imager in the Extreme UltraViolet (EUV) that is being developed as part of the Lagrange mission, a mission designed to be positioned at the L5 Lagrangian point to monitor space weather from its source on the Sun, through the heliosphere, to the Earth. LUCI will use an off-axis two mirror design equipped with an EUV enhanced active pixel sensor. This type of detector has advantages that promise to be very beneficial for monitoring the source of space weather in the EUV. LUCI will also have a novel off-axis wide field-of-view, designed to observe the…
The Cadmium Zinc Telluride (CZT) Imager onboard AstroSat, consists of pixelated CZT detectors, which are sensitive to hard X-rays above 20 keV. The individual pixels are triggered by ionising events occurring in them, and the detectors operate in a self-triggered mode, recording each event separately with information about its time of incidence, detector co-ordinates, and channel that scales with the amount of ionisation. The detectors are sensitive not only to photons from astrophysical sources of interest, but also prone to a number of other events like background X-rays, cosmic rays, and no…
Quantitative and analytical analysis of modulation process of the collimator is a great challenge, and is also of great value to the design and development of Fourier transform imaging telescopes. The Hard X-ray Imager (HXI), as one of the three payloads onboard the Advanced Space-based Solar Observatory(ASO-S) mission, adopts modulating Fourier-Transformation imaging technique and will be used to explore mechanism of energy release and transmission in solar flare activities. As an important step to reconstruct the images of solar flares, accurate modulation functions of HXI are needed. In thi…
A space-borne hard X-ray collimator, comprising 91 pairs of grids, has been developed for the Hard X-ray Imager (HXI). The HXI is one of the three scientific instruments onboard the first Chinese solar mission: the Advanced Space-based Solar Observatory (ASO-S). The HXI collimator (HXI-C) is a spatial modulation X-ray telescope designed to observe hard X-rays emitted by energetic electrons in solar flares. This paper presents the detailed design of the HXI-C for the qualification model that will be inherited by the flight model. Series tests on the HXI-C qualification model are reported to ver…
NISP, a multifaceted near-infrared instrument for the upcoming 2.5m IR telescope at MIRO Gurushikhar, Mount Abu, Rajasthan, India is being developed at PRL, Ahmedabad. NISP will have wide (FOV = 10' x 10') field imaging, moderate (R=3000) spectroscopy and imaging polarimetry operating modes. It is designed based on 0.8 to 2.5 micron sensitive, 2048 X 2048 HgCdTe (MCT) array detector from Teledyne. Optical, Mechanical and Electronics subsystems are being designed and developed in-house at PRL. HAWAII-2RG (H2RG) detector will be mounted along with controlling SIDECAR ASIC inside LN2 filled cryog…
Here we present the conceptual design of a wide field imager onboard a 6U class CubeSat platform for the study of GRB prompt and afterglow emission and detection of electromagnetic counterparts of gravitational waves in soft X-rays. The planned instrument configuration consists of an array of X-ray Hybrid CMOS detectors (HCD), chosen for their soft-X-ray response, flexible and rapid readout rate, and low power, which makes these detectors well suited for detecting bright transients on a CubeSat platform. The wide field imager is realized by a 2D coded mask. We will give an overview of the inst…
Cadmium Zinc Telluride Imager (CZTI) onboard AstroSat has been a prolific Gamma-Ray Burst (GRB) monitor. While the 2-pixel Compton scattered events (100 - 300 keV) are used to extract sensitive spectroscopic information, the inclusion of the low-gain pixels (around 20% of the detector plane) after careful calibration extends the energy range of Compton energy spectra to 600 keV. The new feature also allows single-pixel spectroscopy of the GRBs to the sub-MeV range which is otherwise limited to 150 keV. We also introduced a new noise rejection algorithm in the analysis ('Compton noise'). These …
The Cadmium Zinc Telluride Imager (CZTI) onboard AstroSat consists of an array of a large number of pixellated CZT detectors capable of measuring the polarization of incident hard X-rays. The polarization measurement capability of CZTI for on-axis sources was experimentally confirmed before the launch. CZTI has yielded tantalizing results on the X-ray polarization of the Crab nebula and pulsar in the energy range of 100 - 380 keV. CZTI has also contributed to the measurement of prompt emission polarization for several Gamma-Ray Bursts (GRBs). However, polarization measurements of off-axis sour…
X-ray and Gamma-ray polarization measurements of the prompt emission of Gamma-ray bursts (GRBs) are believed to be extremely important for testing various models of GRBs. So far, the available measurements of hard X-ray polarization of GRB prompt emission have not significantly constrained the GRB models, particularly because of the difficulty of measuring polarization in these bands. The CZT Imager (CZTI) onboard {\em AstroSat} is primarily an X-ray spectroscopic instrument that also works as a wide angle GRB monitor due to the transparency of its support structure above 100 keV. It also has …
Signal processing and data acquisition system for the BTO detectors onboard COSI
Space Sciences Laboratory, University of California, Berkeley（加州大学伯克利分校空间科学实验室）；International Center for Quantum-field Measurement Systems for Studies of the Universe and Particles (QUP, WPI), KEK（高能加速器研究机构量子场测量系统国际中心）；Department of Physics, Nagoya University（名古屋大学物理学系）；The Hakubi Center for Advanced Research, Kyoto University（京都大学博古利高级研究中心）；Department of Physics, Kyoto University（京都大学物理学系）
In this multi-messenger astronomy era, all the observational probes are improving their sensitivities and overall performance. The Focusing on Relativistic universe and Cosmic Evolution (FORCE) mission, the product of a JAXA/NASA collaboration, will reach a 10 times higher sensitivity in the hard X-ray band ($E >$ 10~keV) in comparison with any previous hard X-ray missions, and provide simultaneous soft X-ray coverage. FORCE aims to be launched in the early 2030s, providing a perfect hard X-ray complement to the ESA flagship mission Athena. FORCE will be the most powerful X-ray probe for disco…
