Direct state measurement (DSM) is a tomography method that allows for retrieving quantum states' wave functions directly. However, a shortcoming of current studies on the DSM is that it does not provide access to noisy quantum systems. Here, we attempt to fill the gap by investigating the DSM measurement precision that undergoes the state-preparation-and-measurement (SPAM) errors. We manipulate a quantum controlled measurement framework with various configurations and compare the efficiency between them. Under such SPAM errors, the state to be measured lightly deviates from the true state, and the measurement error in the postselection process results in less accurate in the tomography. Our study could provide a reliable tool for SPAM errors tomography and contribute to understanding and resolving an urgent demand for current quantum technologies.
State preparation and measurement errors are commonly regarded as indistinguishable. The problem of distinguishing state preparation (SPAM) errors from measurement errors is important to the field of characterizing quantum processors. In this work, we propose a method to separately characterize SPAM errors using a novel type of algorithmic cooling protocol called measurement-based algorithmic cooling (MBAC). MBAC assumes the ability to perform (potentially imperfect) projective measurements on individual qubits, which is available on many modern quantum processors. We demonstrate that MBAC can…
Quantum error correction and fault-tolerant quantum computation are two fundamental concepts which make quantum computing feasible. While providing a theoretical means with which to ensure the arbitrary accuracy of any quantum circuit, fault-tolerant error correction is predicated upon the robust preparation of logical states. An optimal direct circuit and a more complex fault-tolerant circuit for the preparation of the [[7,1,3]] Steane logical-zero are simulated in the presence of discrete quantum errors to quantify the regime within which fault-tolerant preparation of logical states is prefe…
We introduce a Bayesian method for the estimation of single qubit errors in quantum devices, and use it to characterize these errors on three 27-qubit superconducting qubit devices. We self-consistently estimate up to seven parameters of each qubit's state preparation, readout, and gate errors, analyze the stability of these errors as a function of time, and demonstrate easily implemented approaches for mitigating different errors before a quantum computation experiment. On the investigated devices we find non-negligible qubit reset errors that cannot be parametrized as a diagonal mixed state,…
Mitigating errors in state preparation and measurement with noncomputational states
IBM Quantum, IBM Research Europe – Zurich（IBM量子，IBM欧洲苏黎世研究部）；Laboratory of Theoretical Physics of Nanosystems, École Polytechnique Fédérale de Lausanne（洛桑联邦理工学院纳米系统理论物理实验室）；Theory and Simulation of Materials, École Polytechnique Fédérale de Lausanne（洛桑联邦理工学院材料理论与模拟）
Fault-tolerant quantum computation using quantum error-correcting codes requires fault-tolerant constructions of nontransversal gates. Shor proposed a fault-tolerant construction of a nontransversal gate, i.e., the Toffoli gate for a family of the Calderbank-Shor-Steane codes which has even-weight stabilizer generators and odd-weight logical operators. In fact, as shown in this paper, error propagations in the ancilla preparation of Shor's construction lead to logical errors. This work provides a solution to this problem through the insertion of bit flip error correction. Finally, error rates …
Protocol for Purifying Noisy Preparation and Measurements of Qubits
Korea Advanced Institute of Science and Technology (KAIST)（韩国科学技术院）；Aalborg University（奥尔堡大学）；Technical University of Munich（慕尼黑工业大学）；Walther-Meißner-Institut, Bayerische Akademie der Wissenschaften（瓦尔特·迈斯纳研究所，巴伐利亚科学院）
Magic state distillation is a resource intensive subroutine that consumes noisy input states to produce high-fidelity resource states that are used to perform logical operations in practical quantum-computing architectures. The resource cost of magic state distillation can be reduced by improving the fidelity of the raw input states. To this end, we propose an initialization protocol that offers a quadratic improvement in the error rate of the input magic states in architectures with biased noise. This is achieved by preparing an error-detecting code which detects the dominant errors that occu…
We schedule the Steane [[7,1,3]] error correction on a model ion trap architecture with ballistic transport. We compare the level one error rates for syndrome extraction using the Shor method of ancilla prepared in verified cat states to the DiVincenzo-Aliferis method without verification. The study examines how the quantum error correction circuit latency and error vary with the number of available ancilla and the choice of protocol for ancilla preparation and measurement. We find that with few exceptions the DiVincenzo-Aliferis method without cat state verification outperforms the standard S…
We examine a single-pulse preparation of the uniform superpositional wave function, which includes all basis states, in a spin quantum computer. The effective energy spectrum and the errors generated by this pulse are studied in detail. We show that, in spite of the finite width of the energy spectrum bands, amplitude and phase errors can be made reasonably small.
Stabilizer states are extensively studied in quantum information theory for their structures based on the Pauli group. Calderbank-Shor-Steane (CSS) stabilizer states are of particular importance in their application to fault-tolerant quantum computation (FTQC). However, how to fault-tolerantly prepare arbitrary CSS stabilizer states for general CSS stabilizer codes is still unknown, and their preparation can be highly costly in computational resources. In this paper, we show how to prepare a large class of CSS stabilizer states useful for FTQC. We propose distillation protocols using syndrome …
Numerical simulation of continuous variable quantum state preparation is a necessary tool for optimization of existing quantum information processing protocols. A powerful instrument for such simulation is the numerical computation in the Fock state representation. It unavoidably uses an approximation of the infinite-dimensional Fock space by finite complex vector spaces implementable with classical digital computers. In this approximation we analyze the accuracy of several currently available methods for computation of the truncated coherent displacement operator. To overcome their limitation…
Single-shot state preparation threshold: rigorous theorem and statistical mechanical mapping
Tsinghua University（清华大学）；Frontier Science Center for Quantum Information（量子信息前沿科学中心）；Yau Mathematical Sciences Center, Tsinghua University（清华大学丘成桐数学科学中心）；Beijing Academy of Quantum Information Sciences（北京量子信息科学研究院）；Hefei National Laboratory（合肥国家实验室）
We experimentally demonstrate that loop state-preparation-and-measurement (SPAM) tomography is capable of detecting correlated errors in a two-qubit system. We prepare photon pairs in a state that approximates a Werner state, which may or may not be entangled. By performing measurements with multiple different detector settings we are able to detect correlated errors between two single-qubit measurements performed in different locations. No assumptions are made concerning either the state preparations or the measurements, other than that the dimensions of the states and the positive-operator-v…
In fault-tolerant quantum computing schemes, the overhead is often dominated by the cost of preparing codewords reliably. This cost generally increases quadratically with the block size of the underlying quantum error-correcting code. In consequence, large codes that are otherwise very efficient have found limited fault-tolerance applications. Fault-tolerant preparation circuits therefore are an important target for optimization. We study the Golay code, a 23-qubit quantum error-correcting code that protects the logical qubit to a distance of seven. In simulations, even using a naive ancilla p…
Quantum error correction is an essential component for practical quantum computing on noisy quantum hardware. However, logical operations on error-corrected qubits require a significant resource overhead, especially for high-precision and high-fidelity non-Clifford rotation gates. To address this issue, we propose a postselection-based algorithm to efficiently prepare resource states for gate teleportation. Our algorithm achieves fault tolerance, demonstrating the exponential suppression of logical errors with code distance, and it applies to any stabilizer codes. We provide analytical derivat…
We have performed an experiment demonstrating that loop state-preparation-and-measurement (SPAM) tomography [C. Jackson and S. J. van Enk, Phys. Rev. A 92, 042312 (2015)] is capable of detecting correlated errors between the preparation and the measurement of a quantum system. Specifically, we have prepared pure and mixed states of single qubits encoded in the polarization of heralded individual photons. By performing measurements using multiple state preparations and multiple measurement device settings we are able to detect if there are any correlated errors between them, and are also able t…
Robust quantum computation requires encoding delicate quantum information into degrees of freedom that are hard for the environment to change. Quantum encodings have been demonstrated in many physical systems by observing and correcting storage errors, but applications require not just storing information; we must accurately compute even with faulty operations. The theory of fault-tolerant quantum computing illuminates a way forward by providing a foundation and collection of techniques for limiting the spread of errors. Here we implement one of the smallest quantum codes in a five-qubit super…
Leakage benchmarking with decohering subgroups in the presence of preparation and measurement errors
National Institute of Standards and Technology（美国国家标准与技术研究院）；University of Colorado, Boulder（科罗拉多大学博尔德分校）；Center for Theory of Quantum Matter, University of Colorado, Boulder（科罗拉多大学博尔德分校量子物质理论中心）
Several techniques have been recently introduced to mitigate errors in near-term quantum computers without the overhead required by quantum error correcting codes. While most of the focus has been on gate errors, measurement errors are significantly larger than gate errors on some platforms. A widely used {\it transition matrix error mitigation} (TMEM) technique uses measured transition probabilities between initial and final classical states to correct subsequently measured data. However from a rigorous perspective, the noisy measurement should be calibrated with perfectly prepared initial st…
Black-box quantum state preparation is a fundamental building block for many higher-level quantum algorithms, which is applied to transduce the data from computational basis into amplitude. Here we present a new algorithm for performing black-box state preparation with inverse coefficients based on the technique of inequality test. This algorithm can be used as a subroutine to perform the controlled rotation stage of the Harrow-Hassidim-Lloyd (HHL) algorithm and the associated matrix inversion algorithms with exceedingly low cost. Furthermore, we extend this approach to address the general bla…
The ideal Bennett-Brassard 1984 (BB84) quantum key distribution protocol is based on the preparation and measurement of qubits in two alternative bases differing by an angle of pi/2. Any real implementation of the protocol, though, will inevitably introduce misalignments in the preparation of the states and in the alignment of the measurement bases with respect to this ideal situation. Various security proofs take into account (at least partially) such errors, i.e., show how Alice and Bob can still distil a secure key in the presence of these imperfections. Here, we consider the complementary …
Calculating molecular energies is likely to be one of the first useful applications to achieve quantum supremacy, performing faster on a quantum than a classical computer. However, if future quantum devices are to produce accurate calculations, errors due to environmental noise and algorithmic approximations need to be characterized and reduced. In this study, we use the high performance qHiPSTER software to investigate the effects of environmental noise on the preparation of quantum chemistry states. We simulated eighteen 16-qubit quantum circuits under environmental noise, each corresponding…
Non-classical joint measurements can hugely improve the efficiency with which certain figures of merit of quantum systems are measured. We use such a measurement to determine a particular figure of merit, the purity, for a polarization qubit. In the process we highlight some of subtleties involved in common methods for generating decoherence in quantum optics.
Quite recently, enhancing security against device-attack vulnerability has been theoretically challenging but also practically important in quantum cryptographic communication. For dealing with this issue in a general and strict scenario, we design a seemingly-new kind of quantum secure direct communication (QSDC) in a linear-optical regime, which we call "preparation-attack-immune QSDC." We address that in our "naive" analysis, it is quite formidable to extract even a piece of information of the secret message, and any malicious eavesdropping attempts will be unsuccessful. The most remarkable…
The exact number of CNOT and single qubit gates needed to implement a Quantum Algorithm in a given architecture is one of the central problems of Quantum Computation. In this work we study the importance of concise realizations of Partially defined Unitary Transformations for better circuit construction using the case study of Dicke State Preparation. The Dicke States $(\left|D^n_k \right>)$ are an important class of entangled states with uses in many branches of Quantum Information. In this regard we provide the most efficient Deterministic Dicke State Preparation Circuit in terms of CNOT and…
Gottesman-Kitaev-Preskill (GKP) states appear to be amongst the leading candidates for correcting errors when encoding qubits into oscillators. However the preparation of GKP states remains a significant theoretical and experimental challenge. Until now, no clear definitions for fault-tolerantly preparing GKP states have been provided. Without careful consideration, a small number of faults can lead to large uncorrectable shift errors. After proposing a metric to compare approximate GKP states, we provide rigorous definitions of fault-tolerance and introduce a fault-tolerant phase estimation p…
Fault-tolerant quantum computation (FTQC) schemes that use multi-qubit large block codes can potentially reduce the resource overhead to a great extent. A major obstacle is the requirement of a large number of clean ancilla states of different types without correlated errors inside each block. These ancilla states are usually logical stabilizer states of the data code blocks, which are generally difficult to prepare if the code size is large. Previously we have proposed an ancilla distillation protocol for Calderbank-Shor-Steane (CSS) codes by classical error-correcting codes. It was assumed t…
