Group-In: Group Inference from Wireless Traces of Mobile Devices
Gürkan Solmaz, Jonathan Fürst, Samet Aytaç, Fang-Jing Wu
备注：
This work has been funded by the EU Horizon 2020 Programme under Grant Agreements No. 731993 AUTOPILOT and No.871249 LOCUS projects. The content of this paper does not reflect the official opinion of the EU. Responsibility for the information and views expressed therein lies entirely with the authors. Proc. of ACM/IEEE IPSN'20, 2020
This paper proposes Group-In, a wireless scanning system to detect static or mobile people groups in indoor or outdoor environments. Group-In collects only wireless traces from the Bluetooth-enabled mobile devices for group inference. The key problem addressed in this work is to detect not only static groups but also moving groups with a multi-phased approach based only noisy wireless Received Signal Strength Indicator (RSSIs) observed by multiple wireless scanners without localization support. We propose new centralized and decentralized schemes to process the sparse and noisy wireless data, and leverage graph-based clustering techniques for group detection from short-term and long-term aspects. Group-In provides two outcomes: 1) group detection in short time intervals such as two minutes and 2) long-term linkages such as a month. To verify the performance, we conduct two experimental studies. One consists of 27 controlled scenarios in the lab environments. The other is a real-world scenario where we place Bluetooth scanners in an office environment, and employees carry beacons for more than one month. Both the controlled and real-world experiments result in high accuracy group detection in short time intervals and sampling liberties in terms of the Jaccard index and pairwise similarity coefficient.
A spurt of progress in wireless power transfer (WPT) and mobile edge computing (MEC) provides a promising approach for Industrial Internet of Things (IIoT) to enhance the quality and productivity of manufacturing. Scheduling in such a scenario is challenging due to congested wireless channels, time-dependent energy constraints, complicated device heterogeneity, and prohibitive signaling overheads. In this paper, we first propose an online algorithm, called energy-aware resource scheduling (ERS), to maximize the system utility comprising throughput and fairness, with consideration on both syste…
Wireless powered mobile edge computing has been envisioned as a promising paradigm to enhance the computation capability of low-power wireless devices in Industrial Internet of Things. An efficient resource scheduling method is critical yet challenging to design in such a scenario due to stochastic traffic arrival, time-coupling uplink/downlink decision and incomplete system state knowledge. To tackle these challenges, an online optimization algorithm is proposed in this paper to maximize long-term system utility balancing throughput and fairness, subject to data age and stability constraints.…
Wireless sensor networks as the base support for the Internet of things has been a large number of popularity and application. Such as intelligent agriculture, we have to use the sensor network to obtain the growth environmental data of crops, etc.. However, the difficulty of power supply of wireless nodes has seriously hindered the application and development of Internet of things. In order to solve this problem, people use low-power, sleep scheduling and other energy-saving methods on the nodes. Although these methods can prolong the working time of nodes, they will eventually become invalid…
We present a framework to analyse the latency budget in wireless systems with Mobile Edge Computing (MEC). Our focus is on teleoperation and telerobotics, as use cases that are representative of mission-critical uplink-intensive IoT systems with requirements on low latency and high reliability. The study is motivated by a general question: What is the optimal compression strategy in reliability and latency constrained systems? We address this question by studying the latency of an uplink connection from a multi-sensor IoT device to the base station. This is a critical link tasked with a timely…
Wireless sensor network (WSN) consists of a group of dedicated sensors nodes which are distributed over a certain area for observing and recording the physical conditions (like temperature, sound, pressure) of the environment and organizing the collected data at a central location. These Sensor nodes are powered by a battery, so energy conservation becomes an important aspect in WSN. The Paper proposes a way of combining traditional LEACH (Low Energy Adaptive Clustering Hierarchy) with Mobile Sink and Rendezvous Nodes (RN Nodes) along with some changes in terms of cluster head selection proces…
The Internet of Things (IoT) will soon be omnipresent and billions of sensors and actuators will support our industries and well-being. IoT devices are embedded systems that are connected using wireless technology for most of the cases. The availability of the wireless network serving the IoT, the privacy, integrity, and trustworthiness of the data are of critical importance, since IoT will drive businesses and personal decisions. This paper proposes a new approach in the wireless security domain that leverages advanced wireless technology and the emergence of the unmanned aerial system or veh…
Unmanned aerial vehicles (UAVs) are widely deployed to enhance the wireless network capacity and to provide communication services to mobile users beyond the infrastructure coverage. Recently, with the help of a promising technology called network virtualization, multiple service providers (SPs) can share the infrastructures and wireless resources owned by the mobile network operators (MNOs). Then, they provide specific services to their mobile users using the resources obtained from MNOs. However, wireless resource sharing among SPs is challenging as each SP wants to maximize their utility/pr…
The future Fifth Generation (5G) mobile cellular networks that are currently in research phase today enable broad range of services/applications beyond classical mobile communications. One key enabler for Ultra-Reliable services to be integrated into mobile networks is the \textit{Reliability} of transmission success of a given data packet. This is harder mainly owing to the time-dependent effective link qualities of the communicating devices. However, successful indication of the availability of the instantaneous link quality (e.g., by the device) would allow opportunistic access of ultra rel…
Resonant Beam Charging (RBC) is the Wireless Power Transfer (WPT) technology, which can provide high-power, long-distance, mobile, and safe wireless charging for Internet of Things (IoT) devices. Supporting multiple IoT devices charging simultaneously is a significant feature of the RBC system. To optimize the multi-user charging performance, the transmitting power should be scheduled for charging all IoT devices simultaneously. In order to keep all IoT devices working as long as possible for fairness, we propose the First Access First Charge (FAFC) scheduling algorithm. Then, we formulate the…
This paper studies a novel user cooperation model in a wireless powered mobile edge computing system where two wireless users harvest wireless power transferred by one energy node and can offload part of their computation tasks to an edge server (ES) for remote execution. In particular, we consider that the direct communication link between one user to the ES is blocked, such that the other user acts as a relay to forward its offloading data to the server. Meanwhile, instead of forwarding all the received task data, we also allow the helping user to compute part of the received task locally to…
Mobile-edge computing (MEC) and wireless power transfer are technologies that can assist in the implementation of next generation wireless networks, which will deploy a large number of computational and energy limited devices. In this letter, we consider a point-to-point MEC system, where the device harvests energy from the access point's (AP's) transmitted signal to power the offloading and/or the local computation of a task. By taking into account the non-linearities of energy harvesting, we provide analytical expressions for the probability of successful computation and for the average numb…
Mobile edge computing (MEC) and wireless power transfer (WPT) are two promising techniques to enhance the computation capability and to prolong the operational time of low-power wireless devices that are ubiquitous in Internet of Things. However, the computation performance and the harvested energy are significantly impacted by the severe propagation loss. In order to address this issue, an unmanned aerial vehicle (UAV)-enabled MEC wireless powered system is studied in this paper. The computation rate maximization problems in a UAV-enabled MEC wireless powered system are investigated under bot…
Usage of mobile sink(s) for data gathering in wireless sensor networks(WSNs) improves the performance of WSNs in many respects such as power consumption, lifetime, etc. In some applications, the mobile sink $MS$ travels along a predefined path to collect data from the nearby sensors, which are referred as sub-sinks. Due to the slow speed of the $MS$, the data delivery latency is high. However, optimizing the {\em data gathering schedule}, i.e. optimizing the transmission schedule of the sub-sinks to the $MS$ and the movement speed of the $MS$ can reduce data gathering latency. We formulate two…
Federated Learning (FL) has been recently presented as a new technique for training shared machine learning models in a distributed manner while respecting data privacy. However, implementing FL in wireless networks may significantly reduce the lifetime of energy-constrained mobile devices due to their involvement in the construction of the shared learning models. To handle this issue, we propose a novel approach at the physical layer based on the application of lightwave power transfer in the FL-based wireless network and a resource allocation scheme to manage the network's power efficiency. …
Intelligent reflecting surfaces (IRSs) have received much attention recently and are envisioned to promote 6G communication networks. In this paper, for wireless communications aided by IRS units, we formulate optimization problems for power control under quality of service (QoS) and max-min fair QoS under three kinds of traffic patterns from a base station (BS) to mobile users (MUs): unicast, broadcast, and multicast. The optimizations are achieved by jointly designing the transmit beamforming of the BS and the phase shift matrix of the IRS. For power control under QoS, existing IRS studies i…
Next-generation wireless networks must enable emerging technologies such as augmented reality and connected autonomous vehicles via wide range of wireless services that span enhanced mobile broadband (eMBB), as well as ultra-reliable low-latency communication (URLLC). Existing wireless systems that solely rely on the scarce sub-6 GHz, microwave ($μ$W) frequency bands will be unable to meet such stringent and mixed service requirements for future wireless services due to spectrum scarcity. Meanwhile, operating at high-frequency millimeter wave (mmWave) bands is seen as an attractive solution, p…
Low-power chemical sensors deployed on mobile platforms make it possible to monitor pollutant concentrations across large urban areas. However, chemical sensors are prone to drift (e.g., aging, damage, poisoning) and have to be calibrated periodically. In this paper, we present an opportunistic calibration approach that relies on encounters between sensors; when in vicinity of each other, sensors exchange measurements and use the accumulated information to re-calibrate. We formulate the calibration process as weighted least-squares, where the most recent measurements are assigned the highest w…
In this work, we address a completely novel case which is the meeting problem of mobile nodes (players) in a wireless ad hoc network. We assume that the only information players have is the received signal strength (RSS) measurements of other players and there is no centralized communication. Each node has a different frequency band and they try to meet with each other in a decentralized manner. We consider the case where players are allowed to move in four orthogonal directions in a grid. Then, we use multi-armed bandit approach to give rewards in the end of every move that players do using R…
Mobile channel modeling has always been the core part for design, deployment and optimization of communication system, especially in 5G and beyond era. Deterministic channel modeling could precisely achieve mobile channel description, however with defects of equipment and time consuming. In this paper, we proposed a novel super resolution (SR) model for cluster characteristics prediction. The model is based on deep neural networks with residual connection. A series of simulations at 3.5 GHz are conducted by a three-dimensional ray tracing (RT) simulator in diverse scenarios. Cluster characteri…
Channel static antennas are considered for mobile devices. The antenna keeps the wireless communication channel static by performing a counter-movement that is opposed to movements of the device that might be caused by a user. The feasibility of the concept is demonstrated for linear movement in an office environment. Channel measurements are performed with quarter wavelength monopole antennas in the 2.4GHz ISM frequency band. A channel model for the wireless communication channel of mobile devices with channel static antennas is proposed based on these measurement results.
Deep reinforcement learning offers a model-free alternative to supervised deep learning and classical optimization for solving the transmit power control problem in wireless networks. The multi-agent deep reinforcement learning approach considers each transmitter as an individual learning agent that determines its transmit power level by observing the local wireless environment. Following a certain policy, these agents learn to collaboratively maximize a global objective, e.g., a sum-rate utility function. This multi-agent scheme is easily scalable and practically applicable to large-scale cel…
Unmanned aerial vehicles (UAVs) can help facilitate cost-effective and flexible service provisioning in future smart cities. Nevertheless, UAV applications generally suffer severe flight time limitations due to constrained onboard battery capacity, causing a necessity of frequent battery recharging or replacement when performing persistent missions. Utilizing wireless mobile chargers, such as vehicles with wireless charging equipment for on-demand self-recharging has been envisioned as a promising solution to address this issue. In this article, we present a comprehensive study of \underline{v…
We consider computation offloading for edge computing in a wireless network equipped with intelligent reflecting surfaces (IRSs). IRS is an emerging technology and has recently received great attention since they can improve the wireless propagation environment in a configurable manner and enhance the connections between mobile devices (MDs) and access points (APs). At this point not many papers consider edge computing in the novel context of wireless communications aided by IRS. In our studied setting, each MD offloads computation tasks to the edge server located at the AP to reduce the assoc…
Radiating wireless power transfer (WPT) brings forth the possibility to cost-efficiently charge wireless devices without requiring a wiring infrastructure. As such, it is expected to play a key role in the deployment of limited-battery communicating devices, as part of the 6G enabled Internet-of-Everything (IoE) vision. To date, radiating WPT technologies are mainly studied and designed assuming that the devices are located in the far-field region of the power radiating antenna, resulting in a relatively low energy transfer efficiency. However, with the transition of 6G systems to mmWave frequ…
Resonant Beam Charging (RBC) is a promising multi-Watt and multi-meter wireless power transfer method with safety, mobility and simultaneously-charging capability. However, RBC system operation relies on information availability including power receiver location, class label and the receiver number. Since smartphone is the most widely-used mobile device, we propose a Mask R-CNN based smartphone detection model in the RBC system. Experiments illustrate that our model reduces the smartphone scanning time to one third. Thus, this machine learningdetectionapproachprovidesanintelligentwaytoimprove …
Energy-efficient computation is an inevitable trend for mobile edge computing (MEC) networks. Resource allocation strategies for maximizing the computation efficiency are critically important. In this paper, computation efficiency maximization problems are formulated in wireless-powered MEC networks under both partial and binary computation offloading modes. A practical non-linear energy harvesting model is considered. Both time division multiple access (TDMA) and non-orthogonal multiple access (NOMA) are considered and evaluated for offloading. The energy harvesting time, the local computing …
North Carolina State University（北卡罗来纳州立大学）；Wuhan University（武汉大学）
In federated learning (FL), reducing the communication overhead is one of the most critical challenges since the parameter server and the mobile devices share the training parameters over wireless links. With such consideration, we adopt the idea of SignSGD in which only the signs of the gradients are exchanged. Moreover, most of the existing works assume Channel State Information (CSI) available at both the mobile devices and the parameter server, and thus the mobile devices can adopt fixed transmission rates dictated by the channel capacity. In this work, only the parameter server side CSI i…
