A spurt of progress in wireless power transfer (WPT) and mobile edge computing (MEC) provides a promising approach for Industrial Internet of Things (IIoT) to enhance the quality and productivity of manufacturing. Scheduling in such a scenario is challenging due to congested wireless channels, time-dependent energy constraints, complicated device heterogeneity, and prohibitive signaling overheads. In this paper, we first propose an online algorithm, called energy-aware resource scheduling (ERS), to maximize the system utility comprising throughput and fairness, with consideration on both system sustainability and stability. Based on Lyapunov optimization and convex optimization techniques, the proposed algorithm achieves asymptotic optimality for heterogeneous IIoT systems without prior knowledge of network state information (NSI). Subsequently, we extend the ERS algorithm to a more realistic scenario where the overhead and delay of NSI feedbacks are nonnegligible. The optimal scheduling decisions of the scenario are provided, and the optimality loss on system utility under outdated NSI is analyzed. Simulations verify our theoretical claims and demonstrate the gains of our proposed ERS algorithm over alternative benchmark schemes.
Wireless powered mobile edge computing has been envisioned as a promising paradigm to enhance the computation capability of low-power wireless devices in Industrial Internet of Things. An efficient resource scheduling method is critical yet challenging to design in such a scenario due to stochastic traffic arrival, time-coupling uplink/downlink decision and incomplete system state knowledge. To tackle these challenges, an online optimization algorithm is proposed in this paper to maximize long-term system utility balancing throughput and fairness, subject to data age and stability constraints.…
In this work, we investigate proactive Hybrid Automatic Repeat reQuest (HARQ) using link-level simulations for multiple packet sizes, modulation orders, BLock Error Rate (BLER) targets and two delay budgets of 1 ms and 2 ms, in the context of Industrial Internet of Things (IIOT) applications. In particular, we propose an enhanced proactive HARQ protocol using a feedback prediction mechanism. We show that the enhanced protocol achieves a significant gain over the classical proactive HARQ in terms of energy efficiency for almost all evaluated BLER targets at least for sufficiently large feedback…
Exploiting light beams to carry information and deliver power is mooted as a potential technology to recharge batteries of future generation Internet of things (IoT) and Internet of underwater things (IoUT) devices while providing optical connectivity. Simultaneous lightwave information and power transfer (SLIPT) has been recently proposed as an efficient way for wireless power transfer between communicating terminals. In this article, we provide an overview of the various SLIPT techniques in time, power, and space domains. We additionally demonstrate two SLPIT scenarios through underwater cha…
The semantic communication system enables wireless devices to communicate effectively with the semantic meaning of the data. Wireless powered Internet of Things (IoT) that adopts the semantic communication system relies on harvested energy to transmit semantic information. However, the issue of energy constraint in the semantic communication system is not well studied. In this paper, we propose a semantic-based energy valuation and take an economic approach to solve the energy allocation problem as an incentive mechanism design. In our model, IoT devices (bidders) place their bids for the ener…
The recent advancements in the Internet of Things (IoT) are giving rise to the proliferation of interconnected devices, enabling various smart applications. These enormous number of IoT devices generates a large capacity of data that further require intelligent data analysis and processing methods, such as Deep Learning (DL). Notably, the DL algorithms, when applied in the Industrial Internet of Things (IIoT), can enable various applications such as smart assembling, smart manufacturing, efficient networking, and accident detection-and-prevention. Therefore, motivated by these numerous applica…
Internet-of-Things (IoT) is omnipresent, ranging from home solutions to turning wheels for the fourth industrial revolution. This article presents the novel concept of Internet-of-Agro-Things (IoAT) with an example of automated plant disease prediction. It consists of solar enabled sensor nodes which help in continuous sensing and automating agriculture. The existing solutions have implemented a battery powered sensor node. On the contrary, the proposed system has adopted the use of an energy efficient way of powering using solar energy. It is observed that around 80% of the crops are attacked…
With rapid technological advancements within the domain of Internet of Things (IoT), strong trends have emerged which indicate a rapid growth in the number of smart devices connected to IoT networks and this growth cannot be supported by traditional cloud computing platforms. In response to the increased capacity of data being transferred over networks, the edge and fog computing paradigms have emerged as extremely viable frameworks that shift computational and storage resources towards the edge of the network, thereby migrating processing power from centralized cloud servers to distributed LA…
Deakin University（迪肯大学）；CSIRO（联邦科学与工业研究组织）；University of New South Wales（新南威尔士大学）；Nanjing University of Science and Technology（南京理工大学）；Nanyang Technological University（南洋理工大学）；Princeton University（普林斯顿大学）
The Industrial Internet of Things (IIoT) offers promising opportunities to transform the operation of industrial systems and becomes a key enabler for future industries. Recently, artificial intelligence (AI) has been widely utilized for realizing intelligent IIoT applications where AI techniques require centralized data collection and processing. However, this is not always feasible in realistic scenarios due to the high scalability of modern IIoT networks and growing industrial data confidentiality. Federated Learning (FL), as an emerging collaborative AI approach, is particularly attractive…
Internet of things (IoT) is a revolutionizing technology which aims to create an ecosystem of connected objects and embedded devices and provide ubiquitous connectivity between trillions of not only smart devices but also simple sensors and actuators. Although recent advancements in miniaturization of devices with higher computational capabilities and ultra-low power communication technologies have enabled the vast deployment of sensors and actuators everywhere, such an evolution calls for fundamental changes in hardware design, software, network architecture, data analytic, data storage and p…
Efficient data processing and computation are essential for the industrial Internet of things (IIoT) to empower various applications, which yet can be significantly bottlenecked by the limited energy capacity and computation capability of the IIoT nodes. In this paper, we employ an unmanned aerial vehicle (UAV) as an edge server to assist IIoT data processing, while considering the practical issue of UAV jittering. Specifically, we propose a joint design on trajectory and offloading strategies to minimize energy consumption due to local and edge computation, as well as data transmission. We pa…
We propose a decision triggered data transmission and collection (DTDTC) protocol for condition monitoring and anomaly detection in the industrial Internet of things (IIoT). In the IIoT, the collection, processing, encoding, and transmission of the sensor readings are usually not for the reconstruction of the original data but for decision making at the fusion center. By moving the decision making process to the local end devices, the amount of data transmission can be significantly reduced, especially when normal signals with positive decisions dominate in the whole life cycle and the fusion …
Towards realizing an intelligent networked society, enabling low-cost low-energy connectivity for things, also known as Internet of Things (IoT), is of crucial importance. While the existing wireless access networks require centralized signaling for managing network resources, this approach is of less interest for future generations of wireless networks due to the energy consumption in such signaling and the expected increase in the number of IoT devices. Then, in this work we investigate leveraging machine learning for distributed control of IoT communications. Towards this end, first we inve…
Internet of Things (IoT) is being considered as the growth engine for industrial revolution 4.0. The combination of IoT, cloud computing and healthcare can contribute in ensuring well-being of people. One important challenge of IoT network is maintaining privacy and to overcome security threats. This paper provides a systematic review of the security aspects of IoT. Firstly, the application of IoT in industrial and medical service scenarios are described, and the security threats are discussed for the different layers of IoT healthcare architecture. Secondly, different types of existing malwar…
The concept of sensor networks (WSNs) has become an important component of the recently proposed cyber-physical systems (CPSs) and Internet of Things which can connect the physical world with embedded software systems. Energy- harvesting (EH) as an enabling technology applied in SNs can heavily reduce the installation and maintenance cost as well as increase system life, flexibility, and scalability as the EH is subject to the important "energy interruption" problem where system tasks can be significantly disrupted by the EH outputs. This problem not only affects the system modeling but also r…
The Industrial Internet of Things (IIoT) is an emerging paradigm to make industrial operations more efficient and intelligent by deploying a massive number of wireless devices to industry scenes. However, due to the limited computing capability and batteries, the Industrial Internet of Things Devices (IIoTDs) can't perform the computation-intensive or delay-sensitive tasks well and provide long-term services in practical. To tackle these challenges, we present an effective global joint resource allocation scheme for Unmanned Aerial Vehicle (UAV) service of Pervasive Edge Computing (PEC) in Ind…
The sixth generation (6G) wireless communication networks are envisioned to revolutionize customer services and applications via the Internet of Things (IoT) towards a future of fully intelligent and autonomous systems. In this article, we explore the emerging opportunities brought by 6G technologies in IoT networks and applications, by conducting a holistic survey on the convergence of 6G and IoT. We first shed light on some of the most fundamental 6G technologies that are expected to empower future IoT networks, including edge intelligence, reconfigurable intelligent surfaces, space-air-grou…
We propose a new energy harvesting strategy that uses a dedicated energy source (ES) to optimally replenish energy for radio frequency (RF) energy harvesting powered Internet of Things. Specifically, we develop a two-step dual tunnel energy requesting (DTER) strategy that minimizes the energy consumption on both the energy harvesting device and the ES. Besides the causality and capacity constraints that are investigated in the existing approaches, DTER also takes into account the overhead issue and the nonlinear charge characteristics of an energy storage component to make the proposed strateg…
In this paper, we propose a wirelessly powered Internet of Things (IoT) system based on the cell-free massive MIMO technology. In such a system, during the downlink phase, the sensors harvest radio-frequency (RF) energy emitted by the distributed access points (APs). During the uplink phase, sensors transmit data to the APs using the harvested energy. Collocated massive MIMO and small-cell IoT can be treated as special cases of cell-free IoT. We derive the tight closed-form lower bound on the amount of harvested energy, and the closed-form expression of SINR as the metrics of power transfer an…
Blockchain is gaining momentum as a promising technology for many application domains, one of them being the Edge-of- Things (EoT) that is enabled by the integration of edge computing and the Internet-of-Things (IoT). Particularly, the amalgamation of blockchain and EoT leads to a new paradigm, called blockchain enabled EoT (BEoT) that is crucial for enabling future low-latency and high-security services and applications. This article envisions a novel BEoT architecture for supporting industrial applications under the management of blockchain at the network edge in a wide range of IoT use case…
We investigate the long-term scheduling and power control scheme for a wirelessly powered cell-free Internet of Things (IoT) network which consists of distributed access points (APs) and large number of sensors. In each time slot, a subset of sensors are scheduled for uplink data transmission or downlink power transfer. Through asymptotic analysis, we obtain closedform expressions for the harvested energy and the achievable rates that are independent of random pilots. Then, using these expressions, we formulate a long-term scheduling and power control problem to maximize the minimum time avera…
A task of anomaly detection for a smart satellite Internet of things system
School of Mathematics, Hefei University of Technology（合肥工业大学数学学院）；School of Electrical and Automation Engineering, Hefei University of Technology（合肥工业大学电气与自动化工程学院）；CCNU Wollongong Joint Institute, Central China Normal University（华中师范大学伍伦贡联合研究院）
Future industrial applications will encompass compelling new use cases requiring stringent performance guarantees over multiple key performance indicators (KPI) such as reliability, dependability, latency, time synchronization, security, etc. Achieving such stringent and diverse service requirements necessitates the design of a special-purpose Industrial Internet of Things (IIoT) network comprising a multitude of specialized functionalities and technological enablers. This article proposes an innovative architecture for such a special-purpose 6G IIoT network incorporating seven functional buil…
Wireless powered backscatter communications (WPBC) is capable of implementing ultra-low-power communication, thus promising in the Internet of Things (IoT) networks. In practice, however, it is challenging to apply WPBC in large-scale IoT networks because of its short communication range. To address this challenge, this paper exploits an unmanned ground vehicle (UGV) to assist WPBC in large-scale IoT networks. In particular, we investigate the joint design of network planning and dynamic resource allocation of the access point (AP), tag reader, and UGV to minimize the total energy consumption.…
Mobile edge computing (MEC) and wireless power transfer (WPT) are two promising techniques to enhance the computation capability and to prolong the operational time of low-power wireless devices that are ubiquitous in Internet of Things. However, the computation performance and the harvested energy are significantly impacted by the severe propagation loss. In order to address this issue, an unmanned aerial vehicle (UAV)-enabled MEC wireless powered system is studied in this paper. The computation rate maximization problems in a UAV-enabled MEC wireless powered system are investigated under bot…
