Energy-efficient computation is an inevitable trend for mobile edge computing (MEC) networks. Resource allocation strategies for maximizing the computation efficiency are critically important. In this paper, computation efficiency maximization problems are formulated in wireless-powered MEC networks under both partial and binary computation offloading modes. A practical non-linear energy harvesting model is considered. Both time division multiple access (TDMA) and non-orthogonal multiple access (NOMA) are considered and evaluated for offloading. The energy harvesting time, the local computing frequency, and the offloading time and power are jointly optimized to maximize the computation efficiency under the max-min fairness criterion. Two iterative algorithms and two alternative optimization algorithms are respectively proposed to address the non-convex problems formulated in this paper. Simulation results show that the proposed resource allocation schemes outperform the benchmark schemes in terms of user fairness. Moreover, a tradeoff is elucidated between the achievable computation efficiency and the total number of computed bits. Furthermore, simulation results demonstrate that the partial computation offloading mode outperforms the binary computation offloading mode and NOMA outperforms TDMA in terms of computation efficiency.
The reconfigurable intelligent surface (RIS) has arose an upsurging research interest recently due to its promising outlook in 5G-and-beyond wireless networks. With the assistance of RIS, the wireless propagation environment is no longer static and could be customized to support diverse service requirements. In this paper, we will approach the rate maximization problems in RIS-aided wireless networks by considering the beamforming and reflecting design jointly. Three representative design problems from different system settings are investigated based on a proposed unified algorithmic framework…
This paper considers an active intelligent reflecting surface (IRS)-aided wireless powered communication network (WPCN), where devices first harvest energy and then transmit information to a hybrid access point (HAP). Different from the existing works on passive IRS-aided WPCNs, this is the first work that introduces the active IRS in WPCNs. To guarantee fairness, the problem is formulated as an amplifying power-limited weighted sum throughput (WST) maximization problem, which is solved by successive convex approximation technique and fractional programming alternatively. To balance the perfor…
In this paper, we introduce a backscatter assisted wirelessly powered mobile edge computing (MEC) network, where each edge user (EU) can offload task bits to the MEC server via hybrid harvest-then-transmit (HTT) and backscatter communications. In particular, considering a practical non-linear energy harvesting (EH) model and a partial offloading scheme at each EU, we propose a scheme to maximize the weighted sum computation bits of all the EUs by jointly optimizing the backscatter reflection coefficient and time, active transmission power and time, local computing frequency and execution time …
The high reflect beamforming gain of the intelligent reflecting surface (IRS) makes it appealing not only for wireless information transmission but also for wireless power transfer. In this letter, we consider an IRS-assisted wireless powered communication network, where a base station (BS) transmits energy to multiple users grouped into multiple clusters in the downlink, and the clustered users transmit information to the BS in the manner of hybrid non-orthogonal multiple access and time division multiple access in the uplink. We investigate optimizing the reflect beamforming of the IRS and t…
This paper studies an unmanned aerial vehicle (UAV)-enabled two-user interference channel for wireless powered communication networks (WPCNs), in which two UAVs wirelessly charge two low-power Internet-of-things (IoT)-devices on the ground and collect information from them. We consider two scenarios when both UAVs cooperate in energy transmission and/or information reception via interference coordination and coordinated multi-point (CoMP), respectively. For both scenarios, the UAVs' controllable mobility is exploited via trajectory design to not only enhance the wireless power transfer (WPT) e…
This paper investigates full-duplex unmanned aerial vehicle (UAV) aided small cell wireless systems, where the UAV serving as the base station (BS) is designed to transmit data to the downlink users and receive data from the uplink users simultaneously. To maximize the total system capacity, including uplink and downlink capacity, the UAV trajectory, downlink/uplink user scheduling, and uplink user transmit power are alternately optimized. The resulting optimization problem is mixed-integer and non-convex, which is challenging to solve. To address it, the block coordinate descent method and su…
In this paper, we consider a full duplex wireless powered communication network where multiple users with RF energy harvesting capabilities communicate to a hybrid energy and information access point. An optimization framework is proposed with the objective of maximizing the sum throughput of the users subject to energy causality and maximum transmit power constraints considering a realistic energy harvesting model incorporating initial battery levels of the users. The joint optimization of power control, time allocation and scheduling is mathematically formulated as a mixed integer non linear…
Traditional seismic acquisition systems suffer from a number of difficulties related to telemetry cables that are used as a means of data transmission. Transforming the traditional seismic acquisition system to a wireless system has been considered as a potential solution to most of these difficulties. The wireless seismic acquisition system has to serve a huge aggregate data rate requirement as is usually the case in a large wireless sensor network. This paper considers the wireless acquisition system, and studies the maximum achievable transmission data rates from the geophones to the wirele…
Wireless-powered communication network (WPCN) is a key technology to power energy-limited massive devices, such as on-board wireless sensors in autonomous vehicles, for Internet-of-Things (IoT) applications. Conventional WPCNs rely only on dedicated downlink wireless power transfer (WPT), which is practically inefficient due to the significant energy loss in wireless signal propagation. Meanwhile, ambient energy harvesting is highly appealing as devices can scavenge energy from various existing energy sources (e.g., solar energy and cellular signals). Unfortunately, the randomness of the avail…
Mobile-edge computing (MEC) and wireless power transfer are technologies that can assist in the implementation of next generation wireless networks, which will deploy a large number of computational and energy limited devices. In this letter, we consider a point-to-point MEC system, where the device harvests energy from the access point's (AP's) transmitted signal to power the offloading and/or the local computation of a task. By taking into account the non-linearities of energy harvesting, we provide analytical expressions for the probability of successful computation and for the average numb…
We investigate the long-term scheduling and power control scheme for a wirelessly powered cell-free Internet of Things (IoT) network which consists of distributed access points (APs) and large number of sensors. In each time slot, a subset of sensors are scheduled for uplink data transmission or downlink power transfer. Through asymptotic analysis, we obtain closedform expressions for the harvested energy and the achievable rates that are independent of random pilots. Then, using these expressions, we formulate a long-term scheduling and power control problem to maximize the minimum time avera…
Radio frequency (RF) energy harvesting is key in attaining perpetual lifetime for time-critical wireless powered communication networks due to full control on energy transfer, far field region, small and low-cost circuitry. In this paper, we propose a novel minimum length scheduling problem to determine the optimal power control, time allocation and transmission schedule subject to data, energy causality and maximum transmit power constraints in a full-duplex wireless powered communication network. We first formulate the problem as a mixed integer non-linear programming problem and conjecture …
This letter considers a multi-pair decode-and-forward relay network where a power-splitting (PS) protocol is adopted at the energy-constrained relay to provide simultaneous wireless information and energy harvesting (EH). To achieve higher efficiency of EH, we propose a new PS-based EH architecture at the relay by incorporating an alternating current (AC) computing logic, which is employed to directly use the wirelessly harvested AC energy for computational blocks. Under a nonlinear EH circuit, our goal is to maximize the fairness of end-to-end rate among user pairs subject to power constraint…
In this paper, we propose a fairness-aware rate maximization scheme for a wireless powered communications network (WPCN) assisted by an intelligent reflecting surface (IRS). The proposed scheme combines user scheduling based on time division multiple access (TDMA) and (mechanical) angular displacement of the IRS. Each energy harvesting user (EHU) has dedicated time slots with optimized durations for energy harvesting and information transmission whereas, the phase matrix of the IRS is adjusted to focus its beam to a particular EHU. The proposed scheme exploits the fundamental dependence of the…
The rapid growth of the so-called Internet of Things is expected to significantly expand and support the deployment of resource-limited devices. Therefore, intelligent scheduling protocols and technologies such as wireless power transfer, are important for the efficient implementation of these massive low-powered networks. This paper studies the performance of a wireless powered communication network, where multiple batteryless devices harvest radio-frequency from a dedicated transmitter in order to communicate with a common information receiver (IR). We investigate several novel selection sch…
This paper considers cell-free massive multiple-input multiple-output systems where the multiple-antenna access points (APs) assist the single-antenna user equipments (UEs) by wireless power transfer. The UEs utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the APs. We consider practical Rician fading with the line-of-sight components of the channels being phase-shifted in each coherence block. The uplink spectral efficiency (SE) is derived for this model and the max-min fairness problem is considered where the optimization variables are the AP a…
Weighted-sum energy efficiency (WSEE) is a key performance metric in heterogeneous networks, where the nodes may have different energy efficiency (EE) requirements. Nevertheless, WSEE maximization is a challenging problem due to its nonconvex sum-of-ratios form. Unlike previous work, this paper presents a systematic approach to WSEE maximization under not only power constraints, but also data rate constraints, using a general SINR expression. In particular, the original problem is transformed into an equivalent form, and then a sequential convex optimization (SCO) algorithm is proposed. This a…
Backscattering assisted wireless-powered communication combines ultralow-power backscatter transmitters with energy harvesting devices. This paper investigates the transmission mode selection problem of a hybrid relay that forwards data by switching between the active wireless-powered transmission and the passive ambient backscattering. It first presents a hybrid relay system model and derives its end-to-end success probability under theoretically optimal, but practically unrealistic, conditions. The transmission mode selection is then formulated as a stochastic two-armed bandit problem in a v…
The integration of mobile edge computing (MEC) and wireless power transfer (WPT) technologies has recently emerged as an effective solution for extending battery life and increasing the computing power of wireless devices. In this paper, we study the resource allocation problem of a multi-user wireless powered MEC system, where the users share the wireless channel via direct sequence code division multiple access (DS-CDMA). In particular, we are interested in jointly optimizing the task offloading decisions and resource allocation, to maximize the weighted sum computation rate of all the users…
The semantic communication system enables wireless devices to communicate effectively with the semantic meaning of the data. Wireless powered Internet of Things (IoT) that adopts the semantic communication system relies on harvested energy to transmit semantic information. However, the issue of energy constraint in the semantic communication system is not well studied. In this paper, we propose a semantic-based energy valuation and take an economic approach to solve the energy allocation problem as an incentive mechanism design. In our model, IoT devices (bidders) place their bids for the ener…
We consider an intelligent reflecting surface (IRS)-assisted wireless powered communication network (WPCN) in which a multi antenna power beacon (PB) sends a dedicated energy signal to a wireless powered source. The source first harvests energy and then utilizing this harvested energy, it sends an information signal to destination where an external interference may also be present. For the considered system model, we formulated an analytical problem in which the objective is to maximize the throughput by jointly optimizing the energy harvesting (EH) time and IRS phase shift matrices. The optim…
An inventory management system for the freezer powered by photovoltaic panels was developed in this study. It aims to promote energy efficiency and the responsible use of food. Its sensor network is an Arduino-based wireless network of sensors on a solar-powered freezer that is used to develop a smart inventory management system that is accessible and is easy to use. By having network of sensors implemented inside the freezer, the inventory of perishable and non-perishable items can easily be monitored without having to physically check the inside of the freezer. In connection with this, a com…
In this paper, we consider a full duplex wireless powered communication network where multiple users with radio frequency energy harvesting capability communicate to an energy broadcasting hybrid access point. We investigate the minimum length scheduling and sum throughput maximization problems considering on-off transmission scheme in which users either transmit at a constant power or remain silent. For minimum length scheduling problem, we propose a polynomial-time optimal scheduling algorithm. For sum throughput maximization, we first derive the characteristics of an optimal schedule and th…
Electronic health monitoring is one of the major applications of wireless body area networks (WBANs) that helps with early detection of any abnormal physiological symptoms. In this paper, we propose and solve an optimization problem that maximizes the energy efficiency (EE) of WBAN consisting of sensor nodes (SNs) equipped with energy harvesting capabilities communicating with an aggregator. We exploit the structure of the optimization problem to provide a sub-optimal solution at a lower computational complexity and derive the mathematical expressions of upper and lower bounds of the source ra…
In a wireless powered communication network (WPCN), an energy access point supplies the energy needs of the network nodes through radio frequency wave transmission, and the nodes store the received energy in their batteries for their future data transmission. In this paper, we propose an online stochastic policy that jointly controls energy transmission from the EAP to the nodes and data transfer among the nodes. For this purpose, we first introduce a novel perturbed Lyapunov function to address the limitations on the energy consumption of the nodes imposed by their batteries. Then, using Lyap…
Billions of everyday objects could become part of the Internet of Things (IoT) by augmentation with low-cost, long-range, maintenance-free wireless sensors. Radio Frequency Identification (RFID) is a low-cost wireless technology that could enable this vision, but it is constrained by short communication range and lack of sufficient energy available to power auxiliary electronics and sensors. Here, we explore the use of flexible perovskite photovoltaic cells to provide external power to semi-passive RFID tags to increase range and energy availability for external electronics such as microcontro…
Machine-type-communications (MTC) are being crucial in the development of next generation mobile networks. Given that MTC devices are usually battery constrained, wireless power transfer (WPT) and energy harvesting (EH) have emerged as feasible options to enlarge the lifetime of the devices, leading to wireless powered networks. In that sense, we consider a setup where groups of sensors are served by a base station (BS), which is responsible for the WPT. Additionally, EH is used to collect energy from the wireless signals transmitted by other sensors. To characterize the energy obtained from b…
This paper studies a general multi-user wireless powered interference channel (IFC) under the harvest-then-transmit protocol, where the communication in channel coherence time consists of two phases, namely wireless energy transfer (WET) and wireless information transfer (WIT). In the first phase, all energy transmitters (ETs) transmit energy signals to information transmitters (ITs) via collaborative waveform design, while in the second phase, each IT transmits an information signal to its intended ET using the harvested energy in the previous phase. The aim is to jointly design the WET-WIT t…
Wireless sensor network (WSN) consists of a group of dedicated sensors nodes which are distributed over a certain area for observing and recording the physical conditions (like temperature, sound, pressure) of the environment and organizing the collected data at a central location. These Sensor nodes are powered by a battery, so energy conservation becomes an important aspect in WSN. The Paper proposes a way of combining traditional LEACH (Low Energy Adaptive Clustering Hierarchy) with Mobile Sink and Rendezvous Nodes (RN Nodes) along with some changes in terms of cluster head selection proces…
In this paper, we propose a distributed power control algorithm for addressing the global energy efficiency (GEE) maximization problem subject to satisfying a minimum target SINR for all user equipments (UEs) in wireless cellular networks. We state the problem as a multi-objective optimization problem which targets minimizing total power consumption and maximizing total throughput, simultaneously, while a minimum target SINR is guaranteed for all UEs. We propose an iterative scheme executed in the UEs to control their transmit power using individual channel state information (CSI) such that th…
Reconfigurable Intelligent Sensing Surface enables Wireless Powered Communication Networks: Interference Suppression and Massive Wireless Energy Transfer
In this paper, we propose a wirelessly powered Internet of Things (IoT) system based on the cell-free massive MIMO technology. In such a system, during the downlink phase, the sensors harvest radio-frequency (RF) energy emitted by the distributed access points (APs). During the uplink phase, sensors transmit data to the APs using the harvested energy. Collocated massive MIMO and small-cell IoT can be treated as special cases of cell-free IoT. We derive the tight closed-form lower bound on the amount of harvested energy, and the closed-form expression of SINR as the metrics of power transfer an…
Wireless powered mobile edge computing has been envisioned as a promising paradigm to enhance the computation capability of low-power wireless devices in Industrial Internet of Things. An efficient resource scheduling method is critical yet challenging to design in such a scenario due to stochastic traffic arrival, time-coupling uplink/downlink decision and incomplete system state knowledge. To tackle these challenges, an online optimization algorithm is proposed in this paper to maximize long-term system utility balancing throughput and fairness, subject to data age and stability constraints.…
Reconfigurable intelligent surfaces (RIS) is a promising solution to build a programmable wireless environment via steering the incident signal in fully customizable ways with reconfigurable passive elements. In this paper, we consider a RIS-aided multiuser multiple-input single-output (MISO) downlink communication system. Our objective is to maximize the weighted sum-rate (WSR) of all users by joint designing the beamforming at the access point (AP) and the phase vector of the RIS elements, while both the perfect channel state information (CSI) setup and the imperfect CSI setup are investigat…
This paper studies a novel user cooperation model in a wireless powered mobile edge computing system where two wireless users harvest wireless power transferred by one energy node and can offload part of their computation tasks to an edge server (ES) for remote execution. In particular, we consider that the direct communication link between one user to the ES is blocked, such that the other user acts as a relay to forward its offloading data to the server. Meanwhile, instead of forwarding all the received task data, we also allow the helping user to compute part of the received task locally to…
