Engineering magnetic anisotropy in two-dimensional systems has enormous scientific and technological implications. The uniaxial anisotropy universally exhibited by two-dimensional magnets has only two stable spin directions, demanding 180 degrees spin switching between states. We demonstrate a novel eightfold anisotropy in magnetic SrRuO3 monolayers by inducing a spin reorientation in (SrRuO3)1/(SrTiO3)N superlattices, in which the magnetic easy axis of Ru spins is transformed from uniaxial <001> direction (N = 1 and 2) to eightfold <111> directions (N = 3, 4 and 5). This eightfold anisotropy enables 71 and 109 degrees spin switching in SrRuO3 monolayers, analogous to 71 and 109 degrees polarization switching in ferroelectric BiFeO3. First-principle calculations reveal that increasing the SrTiO3 layer thickness induces an emergent correlation-driven orbital ordering, tuning spin-orbit interactions and reorienting the SrRuO3 monolayer easy axis. Our work demonstrates that correlation effects can be exploited to substantially change spin-orbit interactions, stabilizing unprecedented properties in two-dimensional magnets and opening rich opportunities for low-power, multi-state device applications.
Motivated by the excellent electronic and optoelectronic properties of two-dimensional (2D) tin oxides, we systematically investigated the thermal conductivity of monolayer SnO and SnO2by the first-principles calculations. The room-temperature thermal conductivity of monolayer SnO and SnO2reaches 9.6 W/(mK) and 98.8 W/(mK), respectively. The size effect is much weaker for monolayer SnO than for monolayer SnO2, due to the coexistence of size dependent and independent component in the thermal conductivity of monolayer SnO. The large difference between the thermal conductivity of 2D tin oxides ca…
The structure of the ultimately-thin crystalline allotrope of silicon oxide, prepared onto a ruthenium surface, is unveiled down to atomic scale with chemical sensitivity, thanks to high resolution scanning tunneling microscopy and first principle calculations. An ordered oxygen lattice is imaged which coexists with the two-dimensional monolayer oxide. This coexistence signals a displacive transformation from an oxygen reconstructed-Ru(0001) to silicon oxide, along which latterally-shifted domains form, each with equivalent and degenerate epitaxial relationships with the substrate. The unavoid…
Two-dimensional (2D) materials are able to strongly confine light hybridized with collective excitations of atoms, enabling electric-field enhancements and novel spectroscopic applications. Recently, freestanding monolayers of oxide perovskites have been synthesized, which possess highly infrared-active phonon modes and a complex interplay of competing interactions. In this study, we evaluate central figures of merit for phonon polaritons in the tetragonal phases of the 2D perovskites SrTiO$_3$, KTaO$_3$, and LiNbO$_3$, using density functional theory calculations. Specifically, we compute the…
Negative Poisson's ratio (NPR) materials have attracted tremendous interest due to their unusual physical properties and potential applications. Certain two-dimensional (2D) monolayer materials have also been found to exhibit NPR and the corresponding deformation mechanism varies. In this study, we found, based on first-principles calculations, that the Poisson's ratio (PR) sign of monolayer Blue Phosphorus Oxide (BPO) can be tuned by strain: the PR is positive under uniaxial strain <= -1% but becomes negative under > 0. The deformation mechanism for BPO under strain depends on the mutual comp…
Atomic layer deposition (ALD) is an essential tool in semiconductor device fabrication that allows the growth of ultrathin and conformal films to precisely form heterostructures and tune interface properties. The self-limiting nature of the chemical reactions during ALD provides excellent control over the layer thickness. However, in contrast to idealized growth models, it is experimentally challenging to create continuous monolayers by ALD because surface inhomogeneities and precursor steric interactions result in island growth during film nucleation. Thus, the ability to create pin-hole free…
A monolayer of ZrO$_{2}$ has recently been grown on the Si(001) surface and shown to have ferroelectric properties, which signifies the realization of the lowest possible thickness in ferroelectric oxides [M. Dogan et al., Nano Lett., 18 (1) (2018)]. In our previous computational study, we reported on the multiple (meta)stable configurations of ZrO$_{2}$ monolayers on Si, and how switching between a pair of differently polarized configurations may explain the observed ferroelectric behavior of these films [M. Dogan and S. Ismail-Beigi, arXiv:1902.01022 (2019)]. In the current study, we conduct…
It is highly desirable to search for promising two-dimensional (2D) monolayer materials for deep insight of 2D materials and applications. We use first-principles method to investigate tetragonal perovskite oxide monolayers as 2D materials. We find four stable 2D monolayer materials from SrTiO$_3$, LaAlO$_3$, KTaO$_3$, and BaFeO$_3$, denoting them as STO-ML, LAO-ML, KTO-ML, and BFO-ML. Our further study shows that through overcoming dangling bonds the first three monolayers are 2D wide-gap semiconducotors, and BFO-ML is a 2D isotropic Heisenberg ferromagnetic metal. There is a large electrosta…
Two-dimensional transition metal dichalcogenides (MX2)/metal oxide heterostructures have shown unique physical properties, making them promising materials for various applications ranging from photocatalysis to solar energy conversion. Understanding the interfacial interactions is highly desirable for designing these heterostructures having excellent performance. Here we systematically study the interfacial interaction in monolayer MX2 (M=Mo, W; X=S, Se)/CeO2 heterostructures and its effects on electronic and optical properties by density functional theory. It is found that the interfacial int…
We report on the polarized neutron reflectometry investigation of monolayer of magnetic iron oxide nanoparticles assembled by the Langmuir-Schaefer method. After deposition onto a solid substrate the polarized neutron reflectometry measurements in the external magnetic field were carried out. Thickness, density, roughness and in-depth resolved magnetization profile of the resulted layer were obtained from accurate fitting routine.
We investigate the variation of the oscillation frequency of the Mg$^{2+}$ and O$^{2-}$ ions in the magnesium oxide lattice due to the interactions of the surface with water monolayers by means of Low Energy Electron Diffraction. Our key result is a new technique to determine the adsorbate vibrations produced by the water monolayers on the surface lattice as a consequence of their change in the surface Debye temperature and its chemical shift. The latter was systematically investigated for different annealing times and for a constant external thermal perturbation in the range of 110-300 K in o…
The electronic, thermal and optical properties of a monolayer BeO with Boron (B) and Nitrogen (N) co-dopant atoms are studied by means of a density functional theory computation. Our calculations reveal that BeO with BN-codopant atoms can give rise to more effective and outstanding performance for the thermal and optical responses. More significantly, the monolayer BeO with BN codopant atoms becomes a semiconductor with a direct band gap in comparison with the insulator behavior of pristine BeO. The particular attention of this work is paid to the influence of the atomic configuration and the …
Metal-mediated exfoliation has been demonstrated as a promising approach for obtaining large-area flakes of 2D materials to fabricate prototypical nanoelectronics. However, several processing challenges related to organic contamination at the interfaces of the 2D material and the gate oxide must be overcome to realize robust devices with high yield. Here, we demonstrate an optimized process to realize high-performance field-effect transistor (FET) arrays from large-area (~5000 um2) monolayer MoS2 with a yield of 85 %. A central element of this process is an exposed material forming gas anneal …
We report on the non-trivial nanoscale kinetics of the deposition of novel complex oxide heterostructures composed of a unit-cell thick correlated metal LaNiO3 and dielectric LaAlO3. The multilayers demonstrate exceptionally good crystallinity and surface morphology maintained over the large number of layers, as confirmed by AFM, RHEED, and synchrotron X-ray diffraction. To elucidate the physics behind the growth, the temperature of the substrate and the deposition rate were varied over a wide range and the results were treated in the framework of a two-layer model. These results are of fundam…
Although much effort has been made to explore quantum anomalous Hall effect (QAHE) in both theory and experiment, the QAHE systems with tunable Chern numbers are yet limited. Here, we theoretically propose that NiAsO$_3$ and PdSbO$_3$, monolayer transitional metal oxides, can realize QAHE with tunable Chern numbers via manipulating their magnetization orientations. When the magnetization lies in the \textit{x-y} plane and all mirror symmetries are broken, the low-Chern-number (i.e., $\mathcal{C}=\pm1$) phase emerges. When the magnetization exhibits non-zero \textit{z}-direction component, the …
Correlated electrons in transition metal oxides (TMOs) exhibit a variety of emergent phases. When TMOs are confined to a single-atomic-layer thickness, experiments so far have shown that they usually lose diverse properties and become insulators. In an attempt to extend the range of electronic phases of the single-atomic-layer oxide, we search for a metallic phase in a monolayer-thick epitaxial SrRuO$_3$ film. Combining atomic-scale epitaxy and angle-resolved photoemission measurements, we show that the monolayer SrRuO$_3$ is a strongly correlated metal. Systematic investigation reveals that t…
Ultrathin (111)-oriented polar iron oxide films were grown on a Pt(111) single crystal either by the reactive deposition of iron or oxidation of metallic iron monolayers. These films were characterized using low energy electron diffraction, scanning tunneling microscopy and conversion electron Mossbauer spectroscopy. The reactive deposition of Fe led to the island growth of Fe3O4, in which the electronic and magnetic properties of the bulk material were modulated by superparamagnetic size effects for thicknesses below 2 nm, revealing specific surface and interface features. In contrast, the ox…
Ionic layer epitaxy (ILE) has recently been developed as an effective strategy to synthesize nanometer-thick 2D materials with a non-layered crystal structure, such as ZnO. The packing density of the amphiphilic monolayer is believed to be a key parameter that controls the nanosheet nucleation and growth. In this work, we systematically investigated the growth behavior of single-crystalline ZnO nanosheets templated at the water-air interface by an anionic oleylsulfate monolayer with different packing densities. The thicknesses of ZnO nanosheets were tuned from one unit cell to four unit cells,…
The advantage of MoS2, compared with graphene, is the direct growth on various oxide substrates by chemical vapor deposition (CVD) without utilizing catalytic metal substrates, which facilitates practical applications for electronics. The carrier mobility is, however, degraded from the intrinsic limit mainly due to short-range scattering caused by S vacancies formed during CVD growth. If the upper limit for the crystallinity of CVD-MoS2 on oxide substrates is determined by the MoS2/substrate interaction during growth, it will hinder the advantage. In this study, we investigated the interaction…
Controlling electronic, magnetic, thermal, and optical properties of boron-nitrogen codoped strontium oxide monolayer: Activation of optical transitions in the VL region
Chiral-Induced Spin Selectivity Effect in a 1 nm Thin 1,1'-Binaphthyl-2,2'-diyl Hydrogenphosphate Self-Assembled Monolayer on Nickel Oxide
Technical University of Darmstadt（达姆施塔特工业大学）；Technical University of Munich（慕尼黑工业大学）；Weizmann Institute of Science（魏茨曼科学研究所）；Chemnitz University of Technology（开姆尼茨工业大学）；Heidelberg University（海德堡大学）；Merck Electronics KGaA（默克电子股份公司）；University of Freiburg（弗赖堡大学）
Two-dimensional (2D) semiconductors are promising channel materials for continued downscaling of complementary metal-oxide-semiconductor (CMOS) logic circuits. However, their full potential continues to be limited by a lack of scalable high-k dielectrics that can achieve atomically smooth interfaces, small equivalent oxide thicknesses (EOT), excellent gate control, and low leakage currents. Here, we report liquid metal printed ultrathin and scalable Ga2O3 dielectric for 2D electronics and electro-optical devices. We directly visualize the atomically smooth Ga2O3/WS2 interfaces enabled by the c…
The number of atomic layers confined in a two-dimensional structure is crucial for the electronic and magnetic properties. Single-layer and bilayer $J_{\rm eff} = 1/2$ square lattices are well-known examples where the presence of the extra layer turns the XY-anisotropy to the $c$-axis anisotropy. We report on experimental realization of a hybrid SrIrO$_3$/SrTiO$_3$ superlattice that integrates monolayer and bilayer square lattices in one layered structure. By synchrotron x-ray diffraction, resonant x-ray magnetic scattering, magnetization, and resistivity measurements, we found that the hybrid…
Tuning exciton emission via ferroelectric polarization at a heterogeneous interface between a monolayer transition metal dichalcogenide and a perovskite oxide membrane
2D-layered tin (II) oxide (SnO) has recently emerged as a promising bipolar channel material for thin-film transistors and complementary metal-oxide-semiconductor devices. In this work, we present a first-principles investigation of the mechanical properties of ultrathin SnO, as well as the electronic implications of tensile strain ($ε$) under both uniaxial and biaxial conditions. Bulk-to-monolayer transition is found to significantly lower the Young's and shear moduli of SnO, highlighting the importance of interlayer Sn-Sn bonds in preserving structural integrity. Unprecedentedly, few-layer S…
Epitaxial growth of atomically-sharp interfaces serves as one of the main building blocks of nanofabrication. Such interfaces are crucial for the operation of various devices including transistors, photo-voltaic cells, and memory components. In order to avoid charge traps that may hamper the operation of such devices, it is critical for the layers to be atomically-sharp. Fabrication of atomically sharp interfaces normally requires ultra-high vacuum techniques and high substrate temperatures. We present here a new self-limiting wet chemical process for deposition of epitaxial layers from alkoxi…
The pairing mechanism of high-temperature superconductivity in cuprates remains the biggest unresolved mystery in condensed matter physics. To solve the problem, one of the most effective approaches is to investigate directly the superconducting CuO2 layers. Here, by growing CuO2 monolayer films on Bi2Sr2CaCu2O8+δ substrates, we identify two distinct and spatially separated energy gaps centered at the Fermi energy, a smaller U-like gap and a larger V-like gap on the films, and study their interactions with alien atoms by low-temperature scanning tunneling microscopy. The newly discovered U-lik…
We present a comprehensive first-principles study of the electronic structure of 51 semiconducting monolayer transition metal dichalcogenides and -oxides in the 2H and 1T hexagonal phases. The quasiparticle (QP) band structures with spin-orbit coupling are calculated in the $G_0W_0$ approximation and comparison is made with different density functional theory (DFT) descriptions. Pitfalls related to the convergence of $GW$ calculations for 2D materials are discussed together with possible solutions. The monolayer band edge positions relative to vacuum are used to estimate the band alignment at …
Two-dimensional (2D) ferroelectricity has attracted extensive attention since its discovery in the monolayers of van der Waals materials. Here we show that 2D ferroelectricity induced by octahedral rotation distortion is widely present in the perovskite bilayer system through first-principles calculations. The perovskite tolerance factor plays a crucial role in the lattice dynamics and ground-state structure of the perovskite monolayers and bilayers, thus providing an important indicator for screening this hybrid improper ferroelectricity. Generally, the ferroelectric switching via an orthorho…
Orhorhombic $α$-MoO$_3$ is a layered oxide with various applications and with excellent potential to be exfoliated as a 2D ultrathin film or monolayer. In this paper, we present a first-principles computational study of its vibrational properties. Our focus is on the zone center modes which can be measured by a combination of infared and Raman spectroscopy. The polarization dependent spectra are simulated. Calculations are also performed for a monolayer form in which "double layers" of Mo$_2$O$_6$ which are weakly van der Waals bonded in the $α$-structure are isolated. Shift in phonon frequenc…
Integrating epitaxial and ferromagnetic Europium Oxide (EuO) directly on silicon is a perfect route to enrich silicon nanotechnology with spin filter functionality. To date, the inherent chemical reactivity between EuO and Si has prevented a heteroepitaxial integration without significant contaminations of the interface with Eu silicides and Si oxides. We present a solution to this long-standing problem by applying two complementary passivation techniques for the reactive EuO/Si interface: ($i$) an $in\:situ$ hydrogen-Si $(001)$ passivation and ($ii$) the application of oxygen-protective Eu mo…
A giant tunneling electroresistance effect may be achieved in a ferroelectric tunnel junction by exploiting the magnetoelectric effect at the interface between a ferroelectric barrier and magnetic La1-xSrxMnO3 electrode. Using first-principles density functional theory we demonstrate that a few magnetic monolayers of La1-xSrxMnO3 near the interface act, in response to ferroelectric polarization reversal, as an atomic scale spin-valve by filtering spin-dependent current. This effect produces more than an order of magnitude change in conductance, and thus constitutes a giant resistive switching …
In this work we report results of step-by-step modeling of the oxidation of free-standing boron monolayers of different types. Results of the calculations demonstrate that the process of the oxidation is always exothermic and lead toward the formation of foam-like boron oxide films with incorporated non-oxidized small boron clusters. Some of these boron-oxide films demonstrate the presence of chemically stable magnetic centers. Evaluation of the physical properties of oxidized boprophene sheets (OBS) demonstrate it possible application in solar energy, as sensors and coating against leakage of…
We have investigated the effects of number of layers on the structural, vibrational, electronic and optical properties of $α$-PbO using first principles calculations. Our theoretical calculations have shown that four Raman active modes of $α$-PbO tend to red-shift from bulk to monolayer due to decreasing of force constants and increasing of bond lengths. It has been shown that while bulk and multilayer $α$-PbO have an indirect band gap, monolayer form has a direct band gap value of 2.59 eV. Although lead atoms have 5d states, spin-orbit coupling does not significantly affect the band structure…
The formation of a novel spin-polarized 2D electron gas at the LaMnO$_3$ monolayer embedded in SrMnO$_3$ is predicted from the first-principles density-functional calculations. The La (d) electrons become confined in the direction normal to the interface in the potential well of the La layer, serving as a positively-charged layer of electron donors. These electrons mediate a ferromagnetic alignment of the Mn t$_{2g}$ spins near the interface via the Anderson-Hasegawa double exchange and become, in turn, spin-polarized due to the internal magnetic fields of the Mn moments.
A key element to tailor the properties of magnetic multilayers is the coupling between the individual magnetic layers. In case of skyrmion hosting multilayers, coupling of skyrmions across the magnetic layers is highly desirable. Here the magnetic interlayer coupling was studied in epitaxial all-oxide heterostructures of ferromagnetic perovskite SrRuO$_3$ layers separated by spacers of the strong spin-orbit coupling oxide SrIrO$_3$. This combination of oxide layers is being discussed as a potential candidate system to host Néel skyrmions. First order reversal curve (FORC) measurements were per…
In this paper we demonstrated the thermal Atomic Layer Deposition (ALD) growth at 250 °C of highly homogeneous and ultra-thin ($\approx$ 3.6 nm) $Al_2O_3$ films with excellent insulating properties directly onto a monolayer (1L) $MoS_2$ membrane exfoliated on gold. Differently than in the case of 1L $MoS_2$ supported by a common insulating substrate ($Al_2O_3/Si$), a better nucleation process of the high-k film was observed on the 1L $MoS_2/Au$ system since the ALD early stages. Atomic force microscopy analyses showed a $\approx 50\%$ $Al_2O_3$ surface coverage just after 10 ALD cycles, its in…
Enhanced Tantalum Superconducting Resonator Performance via All-Surface Organic Monolayer Passivation
Technical University of Munich（慕尼黑工业大学）；Indian Institute of Technology Roorkee（罗克基印度理工学院）；Fraunhofer Institute for Electronic Microsystems and Solid State Technologies (EMFT)（弗劳恩霍夫电子微系统和固态技术研究所）
When transistor gate insulators have nanometer-scale equivalent oxide thickness (EOT), the gate capacitance ($C_\textrm{G}$) becomes smaller than the oxide capacitance ($C_\textrm{ox}$) due to the quantum capacitance and charge centroid capacitance of the channel. Here, we study the capacitance of monolayer MoS$_\textrm{2}$ as a prototypical two-dimensional (2D) channel while considering spatial variations in the potential, charge density, and density of states. At 0.5 nm EOT, the monolayer MoS$_\textrm{2}$ capacitance is smaller than its quantum capacitance, limiting the single-gated $C_\text…
We demonstrate that an applied electric field causes piezoelectric distortion across single molecular monolayers of oligopeptides. We deposited self-assembled monolayers ~1.5 nm high onto smooth gold surfaces. These monolayers exhibit strong piezoelectric response that varies linearly with applied bias (1-3V), measured using piezoresponse force microscopy (PFM). The response is markedly greater than control experiments with rigid alkanethiols and correlates with surface spectroscopy and theoretical predictions of conformational change from applied electric fields. Unlike existing piezoelectric…
The two-dimensional nature of engineered transition-metal ultra-thin oxide films offers a large playground of yet to be fully understood physics. Here, we study pristine SrVO$_3$ monolayers that have recently been predicted to display a variety of magnetic and orbital orders. Above all ordering temperatures, we find that the associated non-local fluctuations lead to a momentum differentiation in the self-energy, particularly in the scattering rate. In the one-band 2D Hubbard model, momentum-selectivity on the Fermi surface ("$k=k_F$") is known to lead to pseudogap physics. Here instead, in the…
As the continuing down-scaling of field-effect transistors (FETs) in more-than-Moore integrated circuits, finding new functional two-dimensional (2D) materials with a higher dielectric constant (high-k) serve as gate dielectrics is critical. Here, we identify dozens of binary 2D oxides by screening potentially exfoliable bulk metal oxides despite of their non-layered structures followed by simulation of the exfoliation process. For dynamically stable materials, we fully characterize their static dielectric constants and electronic structures, among which GeO2(011)/(101)/(1-11) 2D oxides exhibi…
High temporal stability of niobium superconducting resonators by surface passivation with organophosphonate self-assembled monolayers
Technical University of Munich（慕尼黑工业大学）；Fraunhofer Institute for Electronic Microsystems and Solid-State Technologies（弗劳恩霍夫电子微系统和固态技术研究所）；Walther-Meißner-Institut, Bayerische Akademie der Wissenschaften（瓦尔特·迈斯纳研究所，巴伐利亚科学院）
A recent 2D spinFET concept proposes to switch electrostatically between two separate sublayers with strong and opposite intrinsic Rashba effects. This concept exploits the spin-layer locking mechanism present in centrosymmetric materials with local dipole fields, where a weak electric field can easily manipulate just one of the spin channels. Here, we propose a novel monolayer material within this family, lutetium oxide iodide (LuIO). It displays one of the largest Rashba effects among 2D materials (up to $k_R = 0.08$ Å$^{-1}$), leading to a $π/2$ rotation of the spins over just 1 nm. The mon…
Single monolayer ferromagnetic perovskite SrRuO3 with high conductivity and strong ferromagnetism
NTT Basic Research Laboratories, NTT Corporation（NTT基础实验室，NTT公司）；The University of Tokyo（东京大学）；Hiroshima University（广岛大学）；Japan Synchrotron Radiation Research Institute (JASRI)（日本同步辐射研究所）
Two-dimensional (2D) monolayer phosphorene, a 2D system with quasi-one-dimensional (quasi-1D) excitons, provides a unique 2D platform for investigating the dynamics of excitons in reduced dimensions and fundamental many-body interactions. However, on the other hand, the quasi-1D excitonic nature can limit the luminescence quantum yield significantly. Here, we report exciton brightening in monolayer phosphorene achieved via the dimensionality modification of excitons from quasi-1D to zero-dimensional (0D), through the transference of monolayer phosphorene samples onto defect-rich oxide substrat…
Oxide superlattices and microstructures hold the promise for creating a new class of devices with unprecedented functionalities. Density-functional studies of the recently fabricated superlattices of lattice-matched perovskite titanates (SrTiO3)n/(LaTiO3)m reveal a classic wedge-shaped potential originating from the Coulomb potential of a charged sheet of La atoms. The potential in turn confines the electrons in the vicinity of the sheet, leading to an Airy-function localization of the electron states. Magnetism is suppressed for structures with a single LaTiO3 monolayer, while the bulk antife…
Among the recent achievements of sodium-ion battery (SIB) electrode materials, hybridization of two-dimentional (2D) materials is one of the most interesting appointments. In this work, we propose to use the 2D hybrid composites of SnS2 with graphene or graphene oxide (GO) layers as SIB anode, based on the first-principles calculations of their atomic structures, sodium intercalation energetics and electronic properties. The calculations reveal that graphene or GO film can effectively support not only the stable formation of hetero-interface with the SnS2 layer but also the easy intercalation …
