To control the current outbreak of the Coronavirus Disease 2019, constant monitoring of the epidemic is required since, as of today, no vaccines or antiviral drugs against it are known. We provide daily updated estimates of the reproduction number over time at https://stochastik-tu-ilmenau.github.io/COVID-19/. In this document, we describe the estimator we are using which was developed in (Fraser 2007), derive its asymptotic properties, and we give details on its implementation. Furthermore, we validate the estimator on simulated data, demonstrate that estimates on real data lead to plausible results, and perform a sensitivity analysis. Finally, we discuss why the estimates obtained need to be interpreted with care.
We present a simple technique to compare the development of the Covid-19 epidemic in different regions, based only on the time series of confirmed cases. Weekly new infections, taken for every day, are interpreted as infection potential of Covid-19. We derive a robust time-varying reproduction rate for the infection potential, including asymptomatic cases, which does not depend on death rate or testing intensity. It requires few assumptions and shows a more plausible time course than official reproduction rates in several countries.
Objective: To conduct an early estimation of the Basic Reproduction Number (BRN) induced by government interference, and to project resulting day to day number of in-patients, ICU-patients and cumulative number of deaths in a Danish setting. Method: We used the Kermack and McKendrick model with varying basic reproduction number to estimate number infected and age stratified percentages to estimate number of in-patients, ICU-patients and cumulative number of deaths. Changes in basic reproduction number was estimated based on current in-patient numbers. Results: The basic reproductive number in …
The ongoing pandemic of Coronavirus disease (COVID-19) emerged in Wuhan, China in the end of 2019. It has already affected more than 300,000 people, with the number of deaths nearing 13000 across the world. As it has been posing a huge threat to global public health, it is of utmost importance to identify the rate at which the disease is spreading. In this study, we propose a time series model to analyze the trend pattern of the incidence of COVID-19 outbreak. We also incorporate information on total or partial lockdown, wherever available, into the model. The model is concise in structure, an…
Monitoring the evolution of the Covid19 pandemic constitutes a critical step in sanitary policy design. Yet, the assessment of the pandemic intensity within the pandemic period remains a challenging task because of the limited quality of data made available by public health authorities (missing data, outliers and pseudoseasonalities, notably), that calls for cumbersome and ad-hoc preprocessing (denoising) prior to estimation. Recently, the estimation of the reproduction number, a measure of the pandemic intensity, was formulated as an inverse problem, combining data-model fidelity and space-ti…
We discuss the generation of various reproduction ratios or numbers that are very useful to monitor an ongoing epidemic like Covid-19 and examine the effects of intervention measures. A detailed SEIR algorithm is described for their computation, with applications given to the current Covid-19 outbreaks in a number of countries (Argentina, Brazil, France, Italy, Mexico, Spain, UK and USA). The corresponding matlab script, complete and ready to use, is provided for free downloading.
The coronavirus pandemic has rapidly evolved into an unprecedented crisis. The susceptible-infectious-removed (SIR) model and its variants have been used for modeling the pandemic. However, time-independent parameters in the classical models may not capture the dynamic transmission and removal processes, governed by virus containment strategies taken at various phases of the epidemic. Moreover, very few models account for possible inaccuracies of the reported cases. We propose a Poisson model with time-dependent transmission and removal rates to account for possible random errors in reporting …
One of the key indicators used in tracking the evolution of an infectious disease isthe reproduction number. This quantity is usually computed using the reportednumber of cases, but ignoring that many more individuals may be infected (e.g.asymptomatics). We propose a statistical procedure to quantify the impact of un-detected infectious cases on the determination of the effective reproduction number. Our approach is stochastic, data-driven and not relying on any compartmentalmodel. It is applied to the COVID-19 case in eight different countries and all Italianregions, showing that the effect o…
A simplified method to compute $R_t$, the Effective Reproduction Number, is presented. The method relates the value of $R_t$ to the estimation of the doubling time performed with a local exponential fit. The condition $R_t = 1$ corresponds to a growth rate equal to zero or equivalently an infinite doubling time. Different assumptions on the probability distribution of the generation time are considered. A simple analytical solution is presented in case the generation time follows a gamma distribution.
As the interactions between people increases, the impending menace of COVID-19 outbreaks materialize, and there is an inclination to apply lockdowns. In this context, it is essential to have easy-to-use indicators for people to use as a reference. The basic reproduction number of confirmed positives, $R_t$, fulfill such a role. This document proposes a data-driven approach to nowcast $R_t$ based on previous observations' statistical behavior. As more information arrives, the method naturally becomes more precise about the final count of confirmed positives. Our method's strength is that it is …
Timely estimation of the current value for COVID-19 reproduction factor $R$ has become a key aim of efforts to inform management strategies. $R$ is an important metric used by policy-makers in setting mitigation levels and is also important for accurate modelling of epidemic progression. This brief paper introduces a method for estimating $R$ from biased case testing data. Using testing data, rather than hospitalisation or death data, provides a much earlier metric along the symptomatic progression scale. This can be hugely important when fighting the exponential nature of an epidemic. We deve…
As the ravages caused by COVID-19 pandemic are becoming inevitable with every moment, monitoring and understanding of transmission and fatality rate has become even more paramount for containing its spread. The key purpose of this analysis is to report the real-time effective reproduction rate ($R_t$ ) and case fatality rates (CFR) of COVID-19 in South Asia region. Data for this study are extracted from JHU CSSE COVID-19 Data source up to July 31, 2020. $R_t$ is estimated using exponential growth and time-dependent methods. R0 package in R-language is employed to estimate $R_t$ by fitting the …
During the first months, the Covid-19 pandemic has required most countries to implement complex sequences of non-pharmaceutical interventions, with the aim of controlling the transmission of the virus in the population. To be able to take rapid decisions, a detailed understanding of the current situation is necessary. Estimates of time-varying, instantaneous reproduction numbers represent a way to quantify the viral transmission in real time. They are often defined through a mathematical compartmental model of the epidemic, like a stochastic SEIR model, whose parameters must be estimated from …
In the recent COVID-19 pandemic, a wide range of epidemiological modelling approaches have been used to predict the effective reproduction number, R(t), and other COVID-19 related measures such as the daily rate of exponential growth, r(t). These candidate models use different modelling approaches or differing assumptions about spatial or age mixing, and some capture genuine uncertainty in scientific understanding of disease dynamics. Combining estimates using appropriate statistical methodology from multiple candidate models is important to better understand the variation of these outcome mea…
The effective reproduction number is a key figure to monitor the course of the COVID-19 pandemic. In this study we consider a retrospective modelling approach for estimating the effective reproduction number based on death counts during the first year of the pandemic in Germany. The proposed Bayesian hierarchical model incorporates splines to estimate reproduction numbers flexibly over time while adjusting for varying effective infection fatality rates. The approach also provides estimates of dark figures regarding undetected infections over time. Results for Germany illustrate that estimated …
This paper is an exploratory study of two epidemiological questions on a worldwide basis. How fast is the disease spreading? Are the restrictions (especially mobility restrictions) for people bring the expected effect? To answer the first question, we propose a tool for estimating the reproduction number of epidemic (the number of secondary infections $R_t$) based on the SEIR model and compare it with an non-model $R_t$ estimation. To measure the $R_t$ of COVID-19 for different countries, real-time data on coronavirus daily cases of infections, recoveries, deaths are retrieved from the Center …
Since November 6$^{\mathrm{th}}$, 2020, Italian regions have been classified according to four levels, corresponding to specific risk scenarios, for which specific restrictive measures have been foreseen. By analyzing the time evolution of the reproduction number $R_t$, we estimate how much different restrictive measures affect $R_t$, and we quantify the combined effect of the diffusion of virus variants and the beginning of the vaccination campaign upon the $R_t$ trend. We also compute the time delay between implementation of restrictive measures and the resulting effects. Three different mod…
We proposed a Monte-Carlo method to estimate temporal reproduction number without complete information about symptom onsets of all cases. Province-level analysis demonstrated the huge success of Chinese control measures on COVID-19, that is, provinces' reproduction numbers quickly decrease to <1 by just one week after taking actions.
We propose a new method to estimate the time-varying effective (or instantaneous) reproduction number of the novel coronavirus disease (COVID-19). The method is based on a discrete-time stochastic augmented compartmental model that describes the virus transmission. A two-stage estimation method, which combines the Extended Kalman Filter (EKF) to estimate the reported state variables (active and removed cases) and a low pass filter based on a rational transfer function to remove short term fluctuations of the reported cases, is used with case uncertainties that are assumed to follow a Gaussian …
Reproduction Numbers R_0, R_t for COVID-19 Infections with Gaussian Distribution of Generation Times, and of Serial Intervals including Presymptomatic Transmission
We study the datafor the cumulative as well as daily number of cases in the Covid-19 outbreak in China. The cumulative data can be fit to an empirical form obtained from a Susceptible-Infected-Removed (SIR) model studied on an Euclidean network previously. Plotting the number of cases against the distance from the epicenter for both China and Italy, we find an approximate power law variation with an exponent $\sim 1.85$ showing strongly that the spatial dependence plays a key role, a factor included in the model. We report here that the SIR model on the Eucledean network can reproduce with a h…
Addressed in this work is the performance of five popular algorithms, which aim at assessing the dissemination dynamics of the COVID-19 disease on the basis of the time series of new confirmed cases. The tests are based on simulated data, generated by means of a deterministic compartmental epidemiological model \cite{Matsinos2020a}, adapted herein to also include the possibility of the loss of immunity by the group of the recovered (or vaccinated) subjects. Assuming a simple temporal dependence of the effective reproduction number (the exact details are of no relevance as far as the conclusion…
A great issue of discussion of an infectious disease is its basic reproduction number R0, which provides an estimation of the contagiousness of the disease. When R0 > 1, the disease spread will potentially lead to an outbreak, such that of the ongoing COVID-19 pandemics. During the evolution of an outbreak, various non-pharmaceutical interventions are employed, the impact of which is frequently assessed by the reduction that they introduce to the effective reproduction number Rt; reduction below 1 is an indication of eventual dying out of the disease spread. Motivated by the fact that R0 essen…
In epidemiology, the effective reproduction number $R_e$ is used to characterize the growth rate of an epidemic outbreak. In this paper, we investigate properties of $R_e$ for a modified SEIR model of COVID-19 in the city of Houston, TX USA, in which the population is divided into low-risk and high-risk subpopulations. The response of $R_e$ to two types of control measures (testing and distancing) applied to the two different subpopulations is characterized. A nonlinear cost model is used for control measures, to include the effects of diminishing returns. We propose three types of heuristic s…
We propose a new mathematical model to study the coinfection dynamics of COVID-19 and bacterial pneumonia. Our model includes two infection ways for pneumonia, corresponding to community-acquired and hospital-acquired infections. We show that the existence and local stability of equilibria depend on three different parameters, which are interpreted as the basic reproduction numbers of COVID-19, bacterial pneumonia, and bacterial population. Numerical simulations are performed to complement our theoretical analysis, and we show that both diseases can persist if the basic reproduction number of …
During epidemics, estimation of the effective reproduction number (ERN) associated with infectious disease is a challenging topic for policy development and medical resource management. There is still an open question about the dominant factors to characterize in corona virus disease 2019 (COVID-19), although recent studies based on nonlinear regression with machine learning suggested mobility. The emergence of new viral variants is common in widespread pandemics. However, understanding the potential ERN of new variants is required for policy revision, including lockdown constraints. In this s…
We discuss how the presence of a large set of asymptomatic infectives changes our estimate of the COVID-19 basic reproduction number, also known as $R_0$.
Many studies have proposed a relationship between COVID-19 transmissibility and ambient pollution levels. However, a major limitation in establishing such associations is to adequately account for complex disease dynamics, influenced by e.g. significant differences in control measures and testing policies. Another difficulty is appropriately controlling the effects of other potentially important factors, due to both their mutual correlations and a limited dataset. To overcome these difficulties, we will here use the basic reproduction number ($R_0$) that we estimate for USA states using non-li…
In mid of March 2020, Coronaviruses such as COVID-19 is declared as an international epidemic. More than 125000 confirmed cases and 4,607 death cases have been recorded around more than 118 countries. Unfortunately, a coronavirus vaccine is expected to take at least 18 months if it works at all. Moreover, COVID -19 epidemics can mutate into a more aggressive form. Day level information about the COVID -19 spread is crucial to measure the behavior of this new virus globally. Therefore, this study presents a comparison of day level forecasting models on COVID-19 affected cases using time series …
Timely prediction of the COVID-19 progression is not possible without a comprehensive understanding of environmental factors that may affect the infection transmissibility. Studies addressing parameters that may influence COVID-19 progression relied on either the total numbers of detected cases and similar proxies and/or a small number of analyzed factors, including analysis of regions that display a narrow range of these parameters. We here apply a novel approach, exploiting widespread growth regimes in COVID-19 detected case counts. By applying nonlinear dynamics methods to the exponential r…
We propose a compartmental mathematical model for the spread of the COVID-19 disease with special focus on the transmissibility of super-spreaders individuals. We compute the basic reproduction number threshold, we study the local stability of the disease free equilibrium in terms of the basic reproduction number, and we investigate the sensitivity of the model with respect to the variation of each one of its parameters. Numerical simulations show the suitability of the proposed COVID-19 model for the outbreak that occurred in Wuhan, China.
A mathematical model was developed describing the dynamic of the COVID-19 virus over a population considering that the infected can either be symptomatic or not. The model was calibrated using data on the confirmed cases and death from several countries like France, Philippines, Italy, Spain, United Kingdom, China, and the USA. First, we derived the basic reproduction number, $\mathcal{R}_0$, and estimated the effective reproduction $\mathcal{R}_{\rm eff}$ for each country. Second, we were interested in the merits of interventions, either by distancing or by treatment. Results revealed that to…
We present a very simple and transparent method to interpret time series of confirmed Covid-19 cases. Roughly speaking, the analysis of weekly new infections for each day is a tool for the definition and early detection of the turning point of the epidemic. In Italy, the growth of Covid-19 activity was overcome one week ago, Austria and Switzerland followed suit. This note emphasizes the crucial delay of two weeks between infection and listing of infection in a central database. Our estimates of the time course of Covid-19 activity and reproduction rates can reduce the information gap by sever…
In the night of February 20, 2020, the first case of novel coronavirus disease (COVID-19) was confirmed in the Lombardy Region, Italy. In the week that followed, Lombardy experienced a very rapid increase in the number of cases. We analyzed the first 5,830 laboratory-confirmed cases to provide the first epidemiological characterization of a COVID-19 outbreak in a Western Country. Epidemiological data were collected through standardized interviews of confirmed cases and their close contacts. We collected demographic backgrounds, dates of symptom onset, clinical features, respiratory tract speci…
Coronavirus disease (COVID-2019) is a severe ongoing novel pandemic that is spreading quickly across the world. Italy, that is widely considered one of the main epicenters of the pandemic, has registered the highest COVID-2019 death rates and death toll in the world, to the present day. In this article I estimate an autoregressive integrated moving average (ARIMA) model to forecast the epidemic trend over the period after April 4, 2020, by using the Italian epidemiological data at national and regional level. The data refer to the number of daily confirmed cases officially registered by the It…
The infectious coronavirus disease 2019 (COVID-19) has become a serious global pandemic. Different studies have shown that increasing temperature can play a crucial role in the spread of the virus. Most of these studies were limited to winter or moderate temperature levels and were conducted using conventional models. However, traditional models are too simplistic to investigate complex, non-linear relationships and suffer from some restrictions. Therefore, we employed copula models to examine the impact of high temperatures on virus transmission. The findings from the copula models showed tha…
One clear aspect of behaviour in the COVID-19 pandemic has been people's focus on, and response to, reported or observed infection numbers in their community. We describe a simple model of infectious disease spread in a pandemic situation where people's behaviour is influenced by the current risk of infection and where this behavioural response acts homeostatically to return infection risk to a certain preferred level. This model predicts that the reproduction rate $R$ will be centered around a median value of 1, and that a related measure of relative change in the number of new infections wil…
China adjusted the zero-COVID strategy in late 2022, triggering an unprecedented Omicron wave. We estimated the time-varying reproduction numbers of 32 provincial-level administrative divisions from December 2022 to January 2023. We found that the pooled estimate of initial reproduction numbers is 4.74 (95% CI: 4.41, 5.07).
We develop and analyze in this work an epidemiological model for COVID-19 using Tunisian data. Our aims are first to evaluate Tunisian control policies for COVID-19 and secondly to understand the effect of different screening, quarantine and containment strategies and the rule of the asymptomatic patients on the spread of the virus in the Tunisian population. With this work, we show that Tunisian control policies are efficient in screening infected and asymptomatic individuals and that if containment and curfew are maintained the epidemic will be quickly contained.
We present a compartmental SEIAR model of epidemic spread as a generalization of the SEIR model. We believe that the asymptomatic infectious cohort is an omitted part of the understanding of the epidemic dynamics of disease COVID-19. We introduce and derive the basic reproduction number as the weighted arithmetic mean of the basic reproduction numbers of the symptomatic and asymptomatic cohorts. Since the asymptomatic subjects people are not detected, they can spread the disease much longer, and this increases the COVID-19 $R_0$ up to around 9. We show that European epidemic outbreaks in vario…
A configuration model for epidemic spread, based on a scale-free network, is introduced. We obtain the analytical solutions describing both unstable and stable dynamics of the epidemic spreading, and demonstrate how these regimes can interchange during the epidemic. We apply the model to the COVID-19 case and demonstrate the predictive features of our model.
We analytically study the SEIR (Susceptible Exposed Infectious Removed) epidemic model. The aim is to provide simple analytical expressions for the peak and asymptotic values and their characteristic times of the populations affected by the COVID-19 pandemic.
COVID-19 continues to spread across the country and around the world. Current strategies for managing the spread of COVID-19 include social distancing. We present VERA, an interactive AI tool, that first enables users to specify conceptual models of the impact of social distancing on the spread of COVID-19. Then, VERA automatically spawns agent-based simulations from the conceptual models, and, given a data set, automatically fills in the values of the simulation parameters from the data. Next, the user can view the simulation results, and, if needed, revise the simulation parameters and run a…
We analyze changes in the reproduction number, R, of COVID-19 in response to public health interventions. Our results indicate that public health measures undertaken in China reduced R from 1.5 in January to 0.4 in mid-March 2020. They also suggest, however, the limitations of isolation, quarantine, and large-scale attempts to limit travel. While the world-wide reproduction number briefly dropped below 1 as China implemented extensive public health measures, the introduction of the virus to other nations swiftly led to an increasing world-wide average value of R. In Italy, the nation hardest-h…
The COVID-19 pandemic has rapidly spread around the world and burdened public health in almost all countries involving France. After the spread of SARS-CoV-2, France harvested many deaths in total. In this paper, we develop models with integer and fractional orders to investigate the dynamics of COVID-19 transmission in French hospitals and intensive care units (ICUs). Moreover, this paper aims to explore the impact of precautionary measures on the total infected cases in hospitals and ICUs of COVID-19 for the entire France by using available actual data.
We have proposed an SEIR compartmental mathematical model. The prime objective of this study is to analyze and forecast the pandemic in Italy for the upcoming months. The basic reproduction number has been calculated. Based on the current situation in Italy, in this paper, we will estimate the possible time for the end of the pandemic in the country. The impact of lockdown and rapid isolation on the spread of the pandemic are also discussed. Further, we have studied four of the most pandemic affected regions in Italy. Using the proposed model, a prediction has been made about the duration of p…
In this paper we propose a Susceptible-Infected-Exposed-Recovered-Dead (SEIRD) differential model for the analysis and forecast of the COVID-19 spread in some regions of Italy, using the data from the Italian Protezione Civile from February 24th 2020. In this study investigate an adaptation of the model. Since several restricting measures have been imposed by the Italian government at different times, starting from March 8th 2020, we propose a modification of SEIRD by introducing a time dependent transmitting rate. In the numerical results we report the maximum infection spread for the three I…
We propose a robust parameter estimation method for dynamical systems based on Statistical Learning techniques which aims to estimate a set of parameters that well fit the dynamics in order to obtain robust evidences about the qualitative behaviour of its trajectory. The method is quite general and flexible, since it does not rely on any specific property of the dynamical system, and represents a reinterpretation of Approximate Bayesian Computation methods through the lens of Statistical Learning. The method is specially useful for estimating parameters in epidemiological compartmental models …
Non-pharmaceutical interventions (NPIs) have played a crucial role in controlling the spread of COVID-19. Nevertheless, NPI efficacy varies enormously between and within countries, mainly because of population and behavioural heterogeneity. In this work, we adapted a multi-group SEIRA model to study the spreading dynamics of COVID-19 in Chile, representing geographically separated regions of the country by different groups. We use national mobilization statistics to estimate the connectivity between regions and data from governmental repositories to obtain COVID-19 spreading and death rates in…
Background: Northern Italy was one of the most impacted areas by COVID. It is now widely assumed that the virus was silently spreading for at least 2 weeks before the first patient was identified. During this silent phase, and in the following weeks when the hospital system was overburdened, data collection was not performed in an accurate enough way to estimate an epidemic curve. With the aim of assessing both the dynamics of the introduction of the virus and the effectiveness of containment measures introduced, we try to reconstruct the epidemic curve using all cause mortality data. Methods:…
In order to analyze the effectiveness of three successive nationwide lockdown enforced in India, we present a data-driven analysis of four key parameters, reducing the transmission rate, restraining the growth rate, flattening the epidemic curve and improving the health care system. These were quantified by the consideration of four different metrics, namely, reproduction rate, growth rate, doubling time and death to recovery ratio. The incidence data of the COVID-19 (during the period of 2nd March 2020 to 31st May 2020) outbreak in India was analyzed for the best fit to the epidemic curve, ma…
The outbreak and propagation of COVID-19 have posed a considerable challenge to modern society. In particular, the different restrictive actions taken by governments to prevent the spread of the virus have changed the way humans interact and conceive interaction. Due to geographical, behavioral, or economic factors, different sub-groups among a population are more (or less) likely to interact, and thus to spread/acquire the virus. In this work, we present a general multi-group SEIRA model for representing the spread of COVID-19 among a heterogeneous population and test it in a numerical case o…
A reaction-diffusion model was developed describing the spread of the COVID-19 virus considering the mean daily movement of susceptible, exposed and asymptomatic individuals. The model was calibrated using data on the confirmed infection and death from France as well as their initial spatial distribution. First, the system of partial differential equations is studied, then the basic reproduction number, R0 is derived. Second, numerical simulations, based on a combination of level-set and finite differences, shown the spatial spread of COVID-19 from March 16 to June 16. Finally, scenarios of un…
To model the spread of COVID-19 coronavirus in Russian regions and in Moscow, a discrete logistic equation describing the increase in the number of cases is used. To check the adequacy of the mathematical model, the simulation results were compared with the spread of coronavirus in China, in a number of European and Asian countries, and the United States. The parameters of the logistics equation for Russia, Moscow and other large regions were determined in the interval (01.03 - 08.04). A comparative analysis of growth rates of COVID-19 infected population for different countries and regions is…
To curb the spread of COVID-19, many governments around the world have implemented tiered lockdowns with varying degrees of stringency. Lockdown levels are typically increased when the disease spreads and reduced when the disease abates. A predictive control approach is used to develop optimized lockdown strategies for curbing the spread of COVID-19. The strategies are then applied to South African data. The South African case is of interest as the South African government has defined five distinct levels of lockdown, which serves as a discrete control input. An epidemiological model for the s…
We study Susceptible-Exposed-Asymptomatic-Infectious-Recovered (SEAIR) epidemic spreading model of COVID-19. It captures two important characteristics of the infectiousness of COVID-19: delayed start and its appearance before onset of symptoms, or even with total absence of them. The model is theoretically analyzed in continuous-time compartmental version and discrete-time version on random regular graphs and complex networks. We show analytically that there are relationships between the epidemic thresholds and the equations for the susceptible populations at the endemic equilibrium in all thr…
We propose a mathematical model to analyze the time evolution of the total number of infected population with Covid-19 disease at a region in the ongoing pandemic. Using the available data of Covid-19 infected population on various countries we formulate a model which can successfully track the time evolution from early days to the saturation period in a given wave of this infectious disease. It involves a set of effective parameters which can be extracted from the available data. Using those parameters the future trajectories of the disease spread can also be projected. A set of differential …
In December 2019, COVID-19 were detected in Wuhan City, Hubei Province of China. SARS-CoV-2 rapidly spread to the whole Chinese mainland with the people during the Chinese Spring Festival Travel Rush. As of 19 February 2020, 74576 confirmed cases of COVID-19 had been reported in Chinese Mainland. What kind of cities have more confirmed cases, and is there any relationship between GDP and confirmed cases? In this study, we explored the relationship between the confirmed cases of COVID-19 and GDP at the prefectural-level, found a positive correlation between them. This finding warns high GDP are…
