We study both manipulation and detection of two-mode spatial quantum states of light by means of a reconfigurable integrated device built in an electro-optical material in a Kolgelnik-Schmidt configuration, which provides higher error tolerance to fabrication defects and larger integration density than other current schemes. SU(2) transformations are implemented on guided spatial modes in such a way that reconstruction of both the optical field-strength quantum probability distribution, via spatial two-mode homodyne detection, and the full optical field-strength wavefunction, by means of weak values, are carried out. This approach can easily be extended to spatial N-mode input quantum states. Apart from its usefulness to characterize optical quantum states, it is also emphasized its application to the measurement of the so-called generalized quantum polarization.
In this paper, we propose a method for the generation of higher dimensional modal entanglement through type II spontaneous parametric down conversion process using a three waveguide directional coupler in a periodically poled lithium niobate substrate. We show that by a proper design, it is possible to achieve an output state of two photons occupying three different spatial modes. The advantage of using such waveguide structure is its flexibility and the design space availability to achieve desired characteristics of the photon pairs generated in the down conversion process
We demonstrate a spectrally broadband and effcient technique for collecting photoluminescence from a single InAs quantum dot directly into a standard single mode optical fiber. In this approach, an optical fiber taper waveguide is placed in contact with a suspended GaAs nanophotonic waveguide with embedded quantum dots, forming an effcient and broadband directional coupler with standard optical fiber input and output. Effcient photoluminescence collection over a wavelength range of tens of nanometers is demonstrated, and a maximum collection effciency of 6.05 % (corresponding single photon rat…
Photonic integrated circuits play a central role in current and future applications such as communications, sensing, ranging, and information processing. Photonic quantum computing will also likely require an integrated optics architecture for improved stability, scalability, and performance. Fault-tolerant quantum computing mandates very accurate and robust quantum gates. In this work, we demonstrate high-fidelity directional couplers for single-qubit gates in photonic integrated waveguides, utilizing a novel scheme of detuning-modulated composite segments. Specific designs for reduced sensit…
The on-chip integration of quantum light sources has enabled the realization of complex quantum photonic circuits. However, for the practical implementation of such circuits in quantum information applications it is crucial to develop sources delivering entangled quantum photon states with on-demand tunability. Here we propose and experimentally demonstrate the concept of a widely tunable quantum light source based on spontaneous parametric down-conversion in a nonlinear directional coupler. We show that spatial photon-pair correlations and entanglement can be reconfigured on-demand by tuning …
Integrated optical devices are becoming a common tool in modern optical science and engineering. This devices should be designed to allow for precise control and manipulation of light. The femtosecond laser written (FSLW) photonic chips have proven to cope with the most current demands of integrated photonics. However, up to date the polarization degree of freedom has rarely been exploited in experiments performed on the FSLW integrated platform. The main obstacle is an intrinsically low anisotropy of laser written waveguides, preventing the design of polarizing integrated devices with small f…
In general the ubiquitous χ^{(2)} nonlinear directional coupler, where nonlinearity and evanescent coupling are intertwined, is nonintegrable. We rigorously demonstrate that matching excitation to the even or odd fundamental supermodes yields dynamical analytical solutions for any phase matching in a symmetric coupler. We analyze second harmonic generation and optical parametric amplification regimes and study the influence of fundamental fields parity and power on the operation of the device. These fundamental solutions are useful to develop applications in classical and quantum fields such a…
We present a preliminary theoretical and experimental study of quantum projectors implemented by integrated optical directional couplers fabricated by ion-exchange Na/K processes in soda-lime glass. Theoretical considerations about devices formed by concatenated 2x2 directional couplers are presented in order to show their capabilities for implementing N-dimensional quantum projective measurements, and concomitantly the production of 1-qudit states. Since the fundamental unit of these devices are 2x2 directional couplers, we present an experimental study for obtaining, by an optical characteri…
Large cross-section GaN waveguides are proposed as a suitable architecture to achieve integrated quantum photonic circuits. Directional couplers with this geometry have been designed with aid of the beam propagation method and fabricated using inductively coupled plasma etching. Scanning electron microscopy inspection shows high quality facets for end coupling and a well defined gap between rib pairs in the coupling region. Optical characterization at 800 nm shows single-mode operation and coupling-length-dependent splitting ratios. Two photon interference of degenerate photon pairs has been o…
We show that a nonlinear asymmetric directional coupler composed of a linear waveguide and a nonlinear waveguide operating by nondegenerate parametric amplification is an effective source of single-mode squeezed light. This is has been demonstrated, under certain conditions and for specific modes, for incident coherent beams in terms of the quasiprobability functions, photon-number distribution and phase distribution.
A novel class of photonic integrated circuits employs large-scale integration of combined beam splitters and waveguides loaded with phase actuators to provide complex linear processing functionalities that can be reconfigured dynamically. Here, we propose and experimentally demonstrate a thermally-actuated Dual-Drive Directional Coupler (DD-DC) design, integrated in a silicon nitride platform, functioning both as a standalone optical component providing arbitrary optical beam splitting and common phase as well as for its use in waveguide mesh arrangements. We analyze the experimental demonstra…
We present a rotated polarization directional coupler (RPDC) on a photonic chip. We demonstrate a double-track approach to modify the distribution of refractive index between adjacent tracks and form a single waveguide with arbitrary birefringent optical axis. We construct a RPDC with the two axis-rotated waveguides coupled in a strong regime. The obtained extinction ratios on average are about 16dB and 20dB for the corresponding orthogonal polarizations. We perform the reconstruction of Stokes vector to test the projection performance of our RPDC, and observe the average fidelities up to 98.1…
In the quest for applicable quantum information technology miniaturised, compact and scalable sources are of paramount importance. Here, we present the concept for the generation of 2-photon N00N states without further post-processing in a single non-linear optical element. Based upon a periodically poled waveguide coupler, we present the principle of state generation via type-0 parametric down-conversion inside this type of devices. With the eigenmode description of the linear optical element, we utilise the delocalised photon pair generation to generate a N00N state in the measurement basis.…
We propose a directional coupler exploiting the framework of adiabatic passage for two level atomic systems with configuration dependent Allen-Eberly scheme. Recently developed shortcut to adiabatic passage method (STA), which uses transitionless quantum driving algorithm, is applied to the coupler. The study shows that it is possible to reduce the device length significantly using STA, keeping the efficiency of power transfer100%.Shortcut approach shows much superiority in terms of robustness and fidelity in power switching compared to the adiabatic one.
Lithium niobate is a promising platform for integrated quantum optics. In this platform we aim to efficiently manipulate and detect quantum states by combining superconducting single photon detectors and modulators. The cryogenic operation of a superconducting single photon detector dictates the optimisation of the electro-optic modulators under the same operating conditions. To that end, we characterise a phase modulator, directional coupler, and polarisation converter at both ambient and cryogenic temperatures. The operation voltage $V_{π/2}$ of these modulators increases due to the decrease…
We demonstrate integrated photonic circuits for quantum devices using sputtered polycrystalline aluminum nitride (AlN) on insulator. The on-chip AlN waveguide directional couplers, which are one of the most important components in quantum photonics, are fabricated and show the output power splitting ratios from 50:50 to 99:1. The polarization beam splitters with an extinction ratio of more than 10 dB are also realized from the AlN directional couplers. Using the fabricated AlN waveguide beam splitters, we observe the Hong-Ou-Mandel interference with a visibility of 91.7 +(-) 5.66 %.
A fundamental component of an integrated quantum optical circuit is an on-chip beam-splitter operating at the single-photon level. Here we demonstrate the monolithic integration of an on-demand quantum emitter in the form of a single self-assembled InGaAs quantum dot (QD) with a compact (>10 um), air clad, free standing directional coupler acting as a beam-splitter for anti-bunched light. The device was tested by using single photons emitted by a QD embedded in one of the input arms of the device. We verified the single-photon nature of the QD signal by performing Hanbury Brown- Twiss (HBT) me…
We introduce the concept of directional coupling, i.e., the selective transfer of a state between adjacent quantum wires, in the context of quantum computing and short-distance communication. Our analysis rests upon a mathematical analogy between a dual-channel directional coupler and a composite spin system.
We present a detailed study of the generation of photon pairs by spontaneous four-wave mixing in a structure composed of two linearly uncoupled resonators, where energy can be transferred from one resonator to another only through a nonlinear interaction. Specifically, we consider the case of two racetrack-shaped resonators connected by a coupler designed to guarantee that the resonance comb of each resonator can be tuned independently, and to allow the nonlinear interaction between modes that belong to different combs. We show that such a coupler can be realized in at least two ways: a direct…
Entangled photon pairs generated within integrated devices must often be spatially separated for their subsequent manipulation in quantum circuits. Separation that is both deterministic and universal can in principle be achieved through anti-coalescent two-photon quantum interference. However, such interference-facilitated pair separation (IFPS) has not been extensively studied in the integrated setting, where the strong polarization and wavelength dependencies of integrated couplers -- as opposed to bulk-optics beamsplitters -- can have important implications for performance beyond the identi…
We present chip-scale transmission measurements for three key components of a GaP-on-diamond integrated photonics platform: waveguide-coupled disk resonators, directional couplers, and grating couplers. We also present proof-of-principle measurements demonstrating nitrogen-vacancy (NV) center emission coupled into selected devices. The demonstrated device performance, uniformity and yield place the platform in a strong position to realize measurement-based quantum information protocols utilizing the NV center in diamond.
The design, fabrication, and detailed calibration of essential building blocks towards fully integrated linear-optics quantum computation are discussed. Photonic devices are made from silicon nitride rib waveguides, where measurements on ring resonators show small propagation losses. Directional couplers are designed to be insensitive to fabrication variations. Their offset and coupling lengths are measured, as well as the phase difference between the transmitted and reflected light. With careful calibrations, the insertion loss of the directional couplers is found to be small. Finally, an int…
We calculate the Wigner quasiprobability distribution function of quantum elliptical vortex in elliptical beam (EEV), produced by coupling squeezed coherent states of two modes. The coupling between the two modes is performed by using beam splitter (BS) or a dual channel directional coupler (DCDC). The quantum interference due to the coupling between the two modes promises the generation of controlled entanglement for quantum computation and quantum tomography.
We challenge the current thinking and approach to the design of photonic integrated circuits (PICs) for applications in communications, quantum information and sensing. The standard PICs are based on directional couplers, that provide a wide range of functionalities but do not fully respond to the major technological challenges: massive parallelisation of transmission channels, low-energy dissipation and small footprint. We propose a new concept for design of PICs with the ultimate downscaling capability, the absence of geometric loss and a high-fidelity throughput. This is achieved by a perio…
Supersymmetric (SUSY) optical structures provide a versatile platform to manipulate the scattering and localization properties of light, with potential applications to mode conversion, spatial multiplexing and invisible devices. Here we show that SUSY can be exploited to realize broadband transparent intersections between guiding structures in optical networks for both continuous and discretized light. These include transparent crossing of high-contrast-index waveguides and directional couplers, as well as crossing of guiding channels in coupled resonator lattices.
Superconducting circuit quantum electrodynamics experiments with propagating microwaves require devices acting as beam splitters. Using niobium thin films on silicon and sapphire substrates, we fabricated superconducting 180° microstrip hybrid ring couplers, acting as beam splitters with center frequencies of about 6GHz. For the magnitude of the coupling and isolation we find -3.5+/-0.5dB and at least -15dB, respectively, in a bandwidth of 2GHz. We also investigate the effect of reflections at the superconductor-normal conductor contact by means of low temperature laser scanning microscopy. Ou…
Light routing and manipulation are important aspects of integrated optics. They essentially rely on beam splitters which are at the heart of interferometric setups and active routing. The most common implementations of beam splitters suffer either from strong dispersive response (directional couplers) or tight fabrication tolerances (multimode interference couplers). In this paper we fabricate a robust and simple broadband integrated beam splitter based on lithium niobate with a splitting ratio achromatic over more than 130 nm. Our architecture is based on spatial adiabatic passage, a techniqu…
Coherent charge-photon and spin-photon coupling has recently been achieved in silicon double quantum dots (DQD). Here we demonstrate a versatile split-gate cavity-coupler that allows more than one DQD to be coupled to the same microwave cavity. Measurements of the cavity transmission as a function of level detuning yield a charge cavity coupling rate $g_c/2π$ = 58 MHz, charge decoherence rate $γ_c/2π$ = 36 MHz, and cavity decay rate $κ/2π$ = 1.2 MHz. The charge cavity coupling rate is in good agreement with device simulations. Our coupling technique can be extended to enable simultaneous coupl…
Schemes for optical-state truncation of two cavity modes are analysed. The systems, referred to as the nonlinear quantum scissors devices, comprise two coupled nonlinear oscillators (Kerr nonlinear coupler) with one or two of them pumped by external classical fields. It is shown that the quantum evolution of the pumped couplers can be closed in a two-qubit Hilbert space spanned by vacuum and single-photon states only. Thus, the pumped couplers can behave as a two-qubit system. Analysis of time evolution of the quantum entanglement shows that Bell states can be generated. A possible implementat…
We demonstrate that important information about linear optical circuits can be obtained through the phase shift induced by integrated optical resonators. As a proof of principle, the phase of an unbalanced Mach-Zehnder interferometer is determined. Then the method is applied to a complex optical circuit designed for linear optical quantum computation. In this controlled-NOT gate with qubit initialization and tomography stages, the relative phases are determined as well as the coupling ratios of its directional couplers.
We report on the design, fabrication and testing of two superconducting passive microwave components, a quadrature hybrid and a 20 dB directional coupler. These components are designed to be integrated with superconducting qubits or Josephson parametric amplifiers and used in quantum information processing applications. For the coupler, we measure return loss and isolation > 20 dB, and insertion loss < 0.3 dB in a 2 GHz band around 6 GHz. For the hybrid performance, we measure isolation > 20 dB and insertion loss < 0.3 dB in a 10% band around 6.5 GHz. These values are within the design specifi…
We propose an efficient scheme to implement a multiplex-controlled phase gate with multiple photonic qubits simultaneously controlling one target photonic qubit based on circuit quantum electrodynamics (QED). For convenience, we denote this multiqubit gate as MCP gate. The gate is realized by using a two-level coupler to couple multiple cavities. The coupler here is a superconducting qubit. This scheme is simple because the gate implementation requires only \textit{one step} of operation. In addition, this scheme is quite general because the two logic states of each photonic qubit can be encod…
We show that a nonlinear asymmetric directional coupler composed of a linear waveguide and a nonlinear waveguide operating by nondegenerate parametric amplification is an effective source of single-mode squeezed light. This is has been demonstrated, under certain conditions and for specific modes, for incident coherent beams in terms of the quasiprobability functions, photon-number distribution and phase distribution.
We propose a scheme for implementing cross Kerr nonlinearity between two superconducting transmission line resonators (TLR) via their interaction with a coupler which is constructed by two superconducting charge qubits connected to each other via a superconducting quantum interference device. When suitably driven, the coupler can induce very strong cross phase modulation (XPM) between the two TLRs due to its N-type level structure and the consequent electromagnetically induced transparency in its lowest states. The flexibility of our design can lead to various inter-TLR coupling configurations…
Optical waveguides in the form of glass fibers are the backbone of global telecommunication networks. In such optical fibers, the light is guided over long distances by continuous total internal reflection which occurs at the interface between the fiber core with a higher refractive index and the lower index cladding. Although this mechanism ensures that no light escapes from the waveguide, it gives rise to an evanescent field in the cladding. While this field is protected from interacting with the environment in standard optical fibers, it is routinely employed in air- or vacuum-clad fibers i…
Photonic routing is a key building block of many optical applications challenging its development. We report a 2$\times$2 photonic coupler with splitting ratio switchable by a low-voltage electronic signal with 10~GHz bandwidth and tens of nanoseconds latency. The coupler can operate at any splitting ratio ranging from 0:100 to 100:0 with the extinction ratio of 26 dB in optical bandwidth of 1.3 THz. We show sub-nanosecond switching between arbitrary coupling regimes including balanced 50:50 beam splitter, 0:100 switch, and a photonic tap. The core of the device is based on Mach-Zehnder interf…
We propose a new solid state implementation of a quantum computer (quputer) using ballistic single electrons as flying qubits in 1D nanowires. We use a single electron pump (SEP) to prepare the initial state and a single electron transistor (SET) to measure the final state. Single qubit gates are implemented using quantum dots as phase shifters and electron waveguide couplers as beam splitters. A Coulomb coupler acts as a 2-qubit gate, using a mutual phase modulation effect. Since the electron phase coherence length in GaAs/AlGaAs heterostructures is of the order of 30$μ$m, several gates (tens…
The visualization of an exceptional point in a PT symmetric directional coupler(DC) is demonstrated. In such a system the exceptional point can be probed by varying only a single parameter. Using the Rayleigh-Schroedinger perturbation theory we prove that the spectrum of a PT symmetric Hamiltonian is real as long as the radius of convergence has not been reached. We also show how one can use a PT symmetric DC to measure the radius of convergence for non PT symmetric structures. For such systems the physical meaning of the rather mathematical term: radius of convergence, is exemplified.
Integrated optical devices are expected to play a promising role in the field of quantum information science and technology. In this paper, we propose a scheme for the generation of nondegenerate, copolarised, modal, and path- entangled photons using a directional coupler and an asymmetric Y-coupler geometry in type 0 phase-matched domain engineered lithium niobate(LN) waveguide. The nonlinearity in LN is tailored in such a way that quasi phase matching conditions for two different spontaneous parametric down conversion processes are obeyed simultaneously, leading to a modal and path-entangled…
The electro-optic, acousto-optic and nonlinear properties of lithium niobate make it a highly versatile material platform for integrated quantum photonic circuits. A prerequisite for quantum technology applications is the ability to efficiently integrate single photon sources, and to guide the generated photons through ad-hoc circuits. Here we report the integration of quantum dots in monolayer WSe2 into a Ti in-diffused lithium niobate directional coupler. We investigate the coupling of individual quantum dots to the waveguide mode, their spatial overlap, and the overall efficiency of the hyb…
