On-chip optical interconnect has been widely accepted as a promising technology to realize future large-scale multiprocessors. Mode-division multiplexing (MDM) provides a new degree of freedom for optical interconnects to dramatically increase the link capacity. Present on-chip multimode devices are based on traditional wave-optics. Although large amount of computation and optimization are adopted to support more modes, mode-independent manipulation is still hard to be achieved due to severe mode dispersion. Here, we propose a universal solution to standardize the design of fundamental multimode building blocks, by introducing a geometrical-optics-like concept adopting waveguide width larger than the working wavelength. The proposed solution can tackle a group of modes at the same time with very simple processes, avoiding demultiplexing procedure and ensuring compact footprint. Compare to conventional schemes, it is scalable to larger mode channels without increasing the complexity and whole footprint. As a proof of concept, we demonstrate a set of multimode building blocks including crossing, bend, coupler and switches. Low losses of multimode waveguide crossing and bend are achieved, as well as ultra-low power consumption of the multimode switch is realized since it enables reconfigurable routing for a group of modes simultaneously. Our work promotes the multimode photonics research and makes the MDM technique more practical.
Optical I/O plays a crucial role in the lifespan of lab-on-a-chip systems, from preliminary testing to operation in the target environment. However, due to the precise alignments required, efficient and reliable fiber-to-chip connections remain challenging, yielding inconsistent test results and unstable packaged performance. To overcome this issue, for use in single mode on-chip systems, we propose the incorporation of area-enlarged grating couplers working in conjunction with multimode fibers. This combination enables simpler, faster, and more reliable connections than the traditional small …
On-chip high extinction ratio Mach-Zehnder interferometers (MZI) have always attracted interest from researchers as it can be used in many applications in astrophotonics, optical switching, programmable photonic circuits, and quantum information. However, in previous research studies, ultra-high extinction ratio on-chip MZIs have only been achieved by using a multi-stage MZI approach. In this paper, we investigate a high extinction ratio single-stage MZI based on two cascaded multimode interferometers (MMI). We determine that TM noise is an important factor that can prevent us from achieving a…
Mode-division-multiplexing (MDM) is attractive as a means to increase the link capacity of a single wavelength for optical interconnects via the use of multiple mode-channels in multimode bus waveguide.In order to route the data in MDM systems, waveguide bends are typically needed.In particular, ultra-sharp bends are desirable for reducing the chip area occupied by high-density photonic intergrated circuits (PICs). In this work, we propose and demonstrate a novel meta-surfaced waveguide structure on silicon, which enables ultral-sharp multimode waveguide bends to have low loss and low crosstal…
Quantum memory is a fundamental building block for large-scale quantum networks. On-demand optical storage with a large bandwidth, a high multimode capacity and an integrated structure simultaneously is crucial for practical application. However, this has not been demonstrated yet. Here, we fabricate an on-chip waveguide in a $\mathrm {^{151}Eu^{3+}:Y_2SiO_5}$ crystal with insertion losses of 0.2 dB, and propose a novel pumping scheme to enable spin-wave atomic frequency comb (AFC) storage with a bandwidth of 11 MHz inside the waveguide. Based on this, we demonstrate the storage of 200 tempora…
The lack of high power integrated lasers have been limiting silicon photonics. Despite much progress made in chip-scale laser integration, power remains below the level required for key applications. The main inhibiting factor for high power is the low energy efficiency at high pumping currents, dictated by the small size of the active device. Here we break this power limitation by demonstrating a platform that relies on the coupling of a broad-area multimode gain to a silicon-nitride feedback chip, which acts as an external cavity. The feedback provided by the silicon-nitride chip is routed t…
Leveraging the spatial modes of multimode waveguides using mode-division multiplexing (MDM) on an integrated photonic chip allows unprecedented scaling of bandwidth density for on-chip communication. Switching channels between waveguides is critical for future scalable optical networks, but its implementation in multimode waveguides must address how to simultaneously control modes with vastly different optical properties. Here we present a platform for switching signals between multimode waveguides based on individually processing the spatial mode channels using single-mode elements. Using thi…
A multimode microcavity sensor based on a self-interference microring resonator is demonstrated experimentally. The proposed multimode sensing method is implemented by recording wideband transmission spectra that consist of multiple resonant modes. It is different from the previous dissipative sensing scheme, which aims at measuring the transmission depth changes of a single resonant mode in a microcavity. Here, by combining the dissipative sensing mechanism and the machine learning algorithm, the multimode sensing information extracted from a broadband spectrum can be efficiently fused to est…
There have been some significant advances in optical-fiber multimode communications. And important effort in on-chip communication has also been recently reported for realizing mode-division multiplexing (MDM). Because of the difficulty in lack of mode converter which can freely perform mode converting function among different waveguide modes, flexible on-chip mode-division switching communication has been rarely reported. Here we show the first demonstration of mode converter which can convert an arbitrary waveguide mode into any other modes with the help of phase tuning. With that mode conve…
Efficient coupling between on-chip sources and cavities plays a key role in silicon photonics. However, despite the importance of this basic functionality, there are few systematic design tools to simultaneously control coupling between multiple modes in a compact resonator and a single waveguide. Here, we propose a large-scale adjoint optimization approach to produce wavelength-scale waveguide--cavity couplers operating over tunable and broad frequency bands. We numerically demonstrate couplers discovered by this method that can achieve critical, or nearly critical, coupling between multi-rin…
As an important degree of freedom (DoF) in integrated photonic circuits, the orthogonal transverse mode provides a promising and flexible way to increasing communication capability, for both classical and quantum information processing. To construct large-scale on-chip multimode multi-DoF quantum systems, a transverse mode-encoded controlled-NOT (CNOT) gate is necessary. Here, through design and integrate transverse mode-dependent directional coupler and attenuators on a silicon photonic chip, we demonstrate the first multimode implementation of a two-qubit quantum gate. With the aid of state …
Low propagation loss in high confinement waveguides is critical for chip-based nonlinear photonics applications. Sophisticated fabrication processes which yield sub-nm roughness are generally needed to reduce scattering points at the waveguide interfaces in order to achieve ultralow propagation loss. Here, we show ultralow propagation loss by shaping the mode using a highly multimode structure to reduce its overlap with the waveguide interfaces, thus relaxing the fabrication processing requirements. Microresonators with intrinsic quality factors (Q) of 31.8 $\pm$ 4.4 million are experimentally…
On-chip mode-division multiplexing (MDM) has been emerging as a promising technology to further enhance the link capacity and bandwidth of data communications with multiple mode channels. Both mode converters and mode exchangers are indispensable fundamental components for flexible mode operations. While several configurations have been developed previously, it is still very challenging to efficiently manipulate arbitrary high-order modes in a versatile way to reduce the R&D and prototyping costs. Here we initiate a breakthrough with a simple yet universal generic mode operator building block …
We experimentally demonstrate a record net capacity per wavelength of 1.23~Tb/s over a single silicon-on-insulator (SOI) multimode waveguide for optical interconnects employing on-chip mode-division multiplexing and 11$\times$11 multiple-in-multiple-out (MIMO) digital signal processing.
Neuromorphic photonics has recently emerged as a promising hardware accelerator, with significant potential speed and energy advantages over digital electronics, for machine learning algorithms such as neural networks of various types. Integrated photonic networks are particularly powerful in performing analog computing of matrix-vector multiplication (MVM) as they afford unparalleled speed and bandwidth density for data transmission. Incorporating nonvolatile phase-change materials in integrated photonic devices enables indispensable programming and in-memory computing capabilities for on-chi…
Propagation of light beams through scattering or multimode systems may lead to randomization of the spatial coherence of the light. Although information is not lost, its recovery requires a coherent interferometric reconstruction of the original signals, which have been scrambled into the modes of the scattering system. Here, we show that we can automatically unscramble four optical beams that have been arbitrarily mixed in a multimode waveguide, undoing the scattering and mixing between the spatial modes through a mesh of silicon photonics Mach-Zehnder interferometers. Using embedded transpar…
Compact fiber-to-chip couplers play an important role in optical interconnections, especially in data centers. However, the development of couplers has been mostly limited to standard single mode fibers, with few devices compatible with multicore and multimode fibers. Through the use of state-of-the-art optimization algorithms, we designed a compact dual-polarization coupler to interface chips and dense multicore fibers, demonstrating, for the first time, coupling to both polarizations of all the cores, with measured coupling efficiency of $-$4.3 dB and with a 3 dB bandwidth of 48 nm. The dual…
The first demonstration of narrowband spectral filtering of multimode light on a 3D integrated photonic chip using photonic lanterns and waveguide Bragg gratings is reported. The photonic lanterns with multi-notch waveguide Bragg gratings were fabricated using the femtosecond direct-write technique in boro-aluminosilicate glass (Corning, Eagle 2000). Transmission dips of up to 5 dB were measured in both photonic lanterns and reference single-mode waveguides with 10.4-mm-long gratings. The result demonstrates efficient and symmetrical performance of each of the gratings in the photonic lantern.…
Smooth-Curvature Bend Design Guided by Variational Analysis for Adiabatic Multimode Integrated Photonics
Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology（华中科技大学武汉国家光电研究中心）；School of Optical and Electronic Information, Huazhong University of Science and Technology（华中科技大学光学与电子信息学院）；Optics Valley Laboratory（光谷实验室）
Optical circulators are important components of modern day communication technology. With their ability to route photons directionally, these nonreciprocal elements provide useful functionality in photonic circuits and offer prospects for fundamental research on information processing. Developing highly efficient optical circulators thus presents an important challenge, in particular to realize compact reconfigurable implementations that do not rely on a magnetic field bias to break reciprocity. We demonstrate optical circulation based on radiation pressure interactions in an on-chip multimode…
Nonlinear optical wave propagation manifests in a multitude of frequencies generated from quantum-noise, and selecting desired nonlinear products usually requires seeding the medium with extraneous waves, employing spatial or spectral filters, or operation in resonant cavities. This is especially true for multimode systems because of their high density of states. Here we report the discovery of a self-action effect, originating from quantum noise, leading to complete nonlinear optical conversion of an ultrashort soliton pulse between two distinct, spatially coherent eigenmodes that are frequen…
We demonstrate slot-mode optomechanical crystals, a class of device in which photonic and phononic crystal nanobeam resonators separated by a narrow slot are coupled through optomechanical interactions. In these geometries, nanobeam pairs are patterned so that a mechanical breathing mode is confined at the center of one beam, and a high quality factor (Qo>10^5) optical mode is confined in the slot between the beams. Here, we produce slot-mode devices in a stoichiometric Si3N4 platform, with optical modes in the 980 nm band, coupled to breathing mechanical modes at 3.4 GHz, 1.8 GHz, and 400 MHz…
We bring together a cavity-enhanced light-matter interface with a multimode interferometer (MMI) integrated onto a photonic chip and demonstrate the potential of such hybrid systems to tailor distributed entanglement in a quantum network. The MMI is operated with pairs of narrowband photons produced a priori deterministically from a single 87Rb atom strongly coupled to a high-finesse optical cavity. Non-classical coincidences between photon detection events show no loss of coherence when interfering pairs of these photons through the MMI in comparison to the two-photon visibility directly meas…
Wavelength-scale SBS waveguides are enabling novel on-chip functionalities. The micro- and nano-scale SBS structures and the complexity of the SBS waveguides require a characterization technique to monitor the local geometry-dependent SBS responses along the waveguide. In this work, we experimentally demonstrate detection of longitudinal features down to 200$μ$m on a silicon-chalcogenide waveguide using the Brillouin optical correlation domain analysis (BOCDA) technique. We provide simulation and analysis on how multiple acoustic and optical modes and geometrical variations influence the Brill…
Making analogy with atomic physics is a powerful tool for photonic technology, witnessed by the recent development in topological photonics and non-Hermitian photonics based on parity-time symmetry. Mollow triplet is a prominent atomic effect with both fundamental and technological importance. Here we demonstrate the analogue of Mollow triplet with quantum photonic systems. Photonic entanglement is generated with spontaneous nonlinear processes in dressed photonic modes, which are introduced through coherent multimode coupling. We further demonstrate the flexibility of the photonic system to r…
We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the first involves fabricating large multimode waveguides, while the second step consists of a thermal post-annealing process, which erases the outer ring of the refractive index profile, enabling single mode operation in the C-band. By using this procedure we report waveguides with sharp bends (down to 16.6 mm radius) and high (80%) normalized throughputs. This…
In this paper, an on-chip photonic sampled and quantized analog-to-digital converter (ADC) on thin-film lithium niobate platform is experimentally demonstrated. Using two phase modulators as a sampler and a 5$\times$5 multimode interference (MMI) coupler as a quantizer, an 1 GHz sinusoidal analog input signal was successfully converted to a digitized output with a 20 GSample/s sampling rate. To evaluate the system performance, the quantization curves together with the transfer function of the ADC were measured. The experimental effective number of bits (ENOB) was 3.17 bit. The demonstrated dev…
Photonic-chip based TIRF illumination has been used to demonstrate several on-chip optical nanoscopy methods. The sample is illuminated by the evanescent field generated by the electromagnetic wave modes guided inside the optical waveguide. In addition to the photokinetics of the fluorophores, the waveguide modes can be further exploited for introducing controlled intensity fluctuations for exploitation by techniques such as super-resolution optical fluctuation imaging (SOFI). However, the problem of non-uniform illumination pattern generated by the modes contribute to artifacts in the reconst…
Integrated entangled photon pair source is an essential resource for both fundamental investigations and practical applications of quantum information science. Currently there have been several types of entanglement, among which the transverse-mode entanglement is becoming attractive because of its unique advantages. Here, we report an on-chip transverse-mode entangled photon pair source via the spontaneous four-wave mixing processes in a multimode silicon waveguide. Transverse-mode photon pairs are verified over multiple frequency channels within a bandwidth of $\sim$2~THz, and a maximally en…
Mode-division multiplexing (MDM) is becoming an enabling technique for large-capacity data communications via encoding the information on orthogonal guiding modes. However, the on-chip routing of a multimode waveguide occupies too large chip area due to the constraints on inter-mode cross talk and mode leakage. Very recently, many efforts have been made to shrink the footprint of individual element like bending and crossing, but the devices still occupy >10x10 um2 footprint for three-mode multiplexed signals and the high-speed signal transmission has not been demonstrated yet. In this work, we…
We design a Multi-Transverse-Mode Optical Processor (MTMOP) on 220 nm thick Silicon Photonics exploiting the first two quasi-transverse electric modes (TE0 and TE1). The objective is to measure the optical phase, required for programming the optical processor, without use of conventional optical phase detection techniques (e.g., coherent detection). In the proposed design, we use a novel but simple building block that converts the optical phase to optical power. Mode TE0 carries the main optical signal while mode TE1 is for programming purposes. The MTMOP operation relies on the fact that the …
Envisioning more compact and cost accessible astronomical instruments is now possible with existing photonic technologies like specialty optical fibres, photonic lanterns and ultrafast laser inscribed chips. We present an original design of a multicore fibre (MCF) terminated with multimode photonic lantern ports. It is designed to act as a relay fibre with the coupling effciency of a multimode fibre, modal stability similar to a single-mode fibre and low loss in a wide range of wavelengths (380 nm to 860 nm). It provides phase and amplitude scrambling to achieve a stable near field and far fie…
We demonstrate an on-chip Silicon-on-Insulator (SOI) axicon etched using a low resolution (200 nm feature size, 250 nm gap) deep-ultraviolet lithographic fabrication. The axicon consists of circular gratings with seven stages of 1x2 multimode interferometers. We present a technique to apodize the gratings azimuthally by breaking up the circles into arcs which successfully increased the penetration depth in the gratings from $\approx$5 $μ$m to $\approx$55 $μ$m. We characterize the device's performance by coupling 1300$\pm$50 nm swept source laser in to the chip from the axicon, and measuring th…
Recent development in quantum photonics allowed to start the process of bringing photonic-quantum-based systems out of the lab into real world applications. As an example, devices for the exchange of a cryptographic key secured by the law of quantum mechanics are currently commercially available. In order to further boost this process, the next step is to migrate the results achieved by means of bulky and expensive setups to miniaturized and affordable devices. Integrated quantum photonics is exactly addressing this issue. In this paper we briefly review the most recent advancements in the gen…
The design and engineering of photonic architectures, suitable to enhance, collect and guide light on chip is needed for applications in quantum photonics and quantum optomechanics. In this work we apply a Faraday cage based oblique angle etch method to fabricate various functional photonic devices from 4H Silicon Carbide - a material that has attracted attention in recent years, due to its potential in optomechanics, nonlinear optics and quantum information. We detail the processing conditions and thoroughly address the geometrical and optical characteristics of the fabricated devices. Employ…
Atmospheric turbulences can generate scintillation or beam wandering phenomena that impairs free space optical (FSO) communication. In this paper, we propose and demonstrate a proof-of-concept FSO communication receiver based on a spatial demultiplexer and a photonic integrated circuit coherent combiner. The system collects the light from several Hermite Gauss spatial modes and coherently combine on chip the energy from the different modes into a single output. The FSO receiver is characterized with a wavefront emulator bench that generates arbitrary phase and intensity patterns. The multimode…
