A canonical wireless communication system consists of a transmitter and a receiver. The information bit stream is transmitted after coding, modulation, and pulse shaping. Due to the effects of radio frequency (RF) impairments, channel fading, noise and interference, the signal arriving at the receiver will be distorted. The receiver needs to recover the original information from the distorted signal. In this paper, we propose a new receiver model, namely DeepReceiver, that uses a deep neural network to replace the traditional receiver's entire information recovery process. We design a one-dimensional convolution DenseNet (1D-Conv-DenseNet) structure, in which global pooling is used to improve the adaptability of the network to different input signal lengths. Multiple binary classifiers are used at the final classification layer to achieve multi-bit information stream recovery. We also exploit the DeepReceiver for unified blind reception of multiple modulation and coding schemes (MCSs) by including signal samples of corresponding MCSs in the training set. Simulation results show that the proposed DeepReceiver performs better than traditional step-by-step serial hard decision receiver in terms of bit error rate under the influence of various factors such as noise, RF impairments, multipath fading, cochannel interference, dynamic environment, and unified reception of multiple MCSs.
In this paper, we propose an algorithm to perform modulation classification on a 5-class problem consisting of AM, 2-PSK, 4-PSK, 8-PSK and 16-QAM modulation schemes using a combination of features based on the first order cyclostationarity, second- and higher-order moments, and then extend the idea of classification to an intelligent receiver which classifies and demodulates the signal without prior information regarding the transmitted signal.
With the recent introduction of electromagnetic meta-surfaces and reconfigurable intelligent surfaces, a paradigm shift is currently taking place in the world of wireless communications and related industries. These new technologies have enabled the inclusion of the wireless channel as part of the optimization process. This is of great interest as we transition from 5G mobile communications towards 6G. In this paper, we explore the possibility of using a reconfigurable intelligent surface in order to disrupt the ability of an unintended receiver to geolocate the source of transmitted signals i…
Reconfigurable intelligent surface (RIS) can improve the communications between a source and a destination. Recently, continuous aperture RIS is proved to have better communication performance than discrete aperture RIS and has received much attention. However, the conventional continuous aperture RIS is designed to convert the incoming planar waves into the outgoing planar waves, which is not the optimal reflecting scheme when the receiver is not a planar array and is located in the near field of the RIS. In this paper, we consider two types of receivers in the radiating near field of the RIS…
Visible light communication (VLC) enables access to huge unlicensed bandwidth, a higher security level, and no radio frequency interference. With these advantages, VLC emerges as a complementary solution to radio frequency communications. VLC systems have primarily been designed for indoor scenarios with typical transmission distances between 2 and 5 m. Different designs would be required for larger distances. This paper proposes for the first time the use of a liquid crystal (LC)-based re-configurable intelligent surface (RIS) on improving the VLC signal detection and transmission range. An L…
Resonant Beam Charging (RBC) is a promising multi-Watt and multi-meter wireless power transfer method with safety, mobility and simultaneously-charging capability. However, RBC system operation relies on information availability including power receiver location, class label and the receiver number. Since smartphone is the most widely-used mobile device, we propose a Mask R-CNN based smartphone detection model in the RBC system. Experiments illustrate that our model reduces the smartphone scanning time to one third. Thus, this machine learningdetectionapproachprovidesanintelligentwaytoimprove …
The operation of an intelligent reflecting surface (IRS) under predictable receiver mobility is investigated. We develop a continuous time system model for multipath channels and discuss the optimal IRS configuration with respect to received power, Doppler spread, and delay spread. It is shown that the received power can be maximized without adding Doppler spread to the system. In a numerical case study, we show that an IRS having the size of just two large billboards can improve the link budget of ground to Low Earth Orbit (LEO) satellite links by up to 6 dB. It also adds a second, almost equ…
Reconfigurable intelligent surfaces (RISs) have been recently considered as one of the emerging technologies for future communication systems by leveraging the tuning capabilities of their reflecting elements. In this paper, we investigate the potential of an RIS-based architecture for uplink sensor data transmission in an ultra-reliable low-latency communication (URLLC) context. In particular, we propose an RIS-aided grant-free access scheme for an industrial control scenario, aiming to exploit diversity and achieve improved reliability performance. We consider two different resource allocati…
We consider an uplink multi-user scenario and investigate the use of reconfigurable intelligent surfaces (RIS) to optimize spatial multiplexing performance when a linear receiver is used. We study two different formulations of the problem, namely maximizing the effective rank and maximizing the minimum singular value of the RIS-augmented channel. We employ gradient-based optimization to solve the two problems and compare the solutions in terms of the sum-rate achievable when a linear receiver is used. Our results show that the proposed criteria can be used to optimize the RIS to obtain effecti…
The reconfigurable intelligent surface is a promising technology for the manipulation and control of wireless electromagnetic signals. In particular, it has the potential to provide significant performance improvements for wireless networks. However, to do so, a proper reconfiguration of the reflection coefficients of unit cells is required, which often leads to complex and expensive devices. To amortize the cost, one may share the system resources among multiple transmitters and receivers. In this paper, we propose an efficient reconfiguration technique providing control over multiple beams i…
We introduce a new technique for narrow-band (NB) signal classification in sparsely populated wide-band (WB) spectrum using supervised learning approach. For WB spectrum acquisition, Nyquist rate sampling is required at the receiver's analog-to-digital converter (ADC), hence we use compressed sensing (CS) theory to alleviate such high rate sampling requirement at the receiver ADC. From the estimated WB spectrum, we then extract various spectral features of each of the NB signal. These features are then used to train and classify each NB signal into its respective modulation using the random fo…
The emergence of visible light communication (VLC) technology as a solution to solve radio frequency impediments, such as spectrum shortage, is continuously appealing. In addition to its large and unlicensed bandwidth, VLC provides a high level of security in a closed room with zero radio frequency interference. However, loss of the VLC signal is experienced when the receiver rotates or moves. This challenge requires a special solution for integration into portable devices. On the other hand, re-configurable intelligent surface (RIS) is a technology exploited in radio frequency to solve dead z…
In this work, we consider the Direction-of-Arrival (DOA) estimation problem in a low-cost architecture where only one antenna as the receiver is aided by a reconfigurable intelligent surface (RIS). We introduce the one-bit RIS as a signal reflector to enhance signal transmission in non-line-of-sight (NLOS) situations and substantially simplify the physical hardware for DOA estimation. We optimize the beamforming scheme called measurement matrix to focus the echo power on the receiver with the coarse localization information of the targets as the prior. A beamforming scheme based on the modifie…
Intelligent reflecting surfaces (IRS) have been proposed as a revolutionary technology owing to its capability of adaptively reconfiguring the propagation environment in a cost-effective and hardware-efficient fashion. While the application of IRS as a passive reflector to enhance the performance of wireless communications has been widely investigated in the literature, using IRS as a passive transmitter recently is emerging as a new concept and attracting steadily growing interest. In this paper, we propose two novel IRS-based passive information transmission systems using advanced symbol-lev…
Rate-splitting multiple access (RSMA) and reconfigurable intelligent surface (RIS) have been both recognized as promising techniques for 6G. The benefits of combining the two techniques to enhance the spectral and energy efficiency have been recently exploited in communication-only networks. Inspired by the recent advances on RIS empowered RSMA, in this work we investigate the use of RIS empowered RSMA for simultaneous wireless information and power transfer (SWIPT) with one transmitter concurrently sending information to multiple information receivers (IRs) and transferring energy to multiple…
Intelligent reflecting surface (IRS) is an emerging technology for future wireless communications including 5G and especially 6G. It consists of a large 2D array of (semi-)passive scattering elements that control the electromagnetic properties of radio-frequency waves so that the reflected signals add coherently at the intended receiver or destructively to reduce co-channel interference. The promised gains of IRS-assisted communications depend on the accuracy of the channel state information. In this paper, we address the receiver design for an IRS-assisted multiple-input multiple-output (MIMO…
In this paper, we introduce an intelligent reflecting surface (IRS) to provide a programmable wireless environment for physical layer security. By adjusting the reflecting coefficients, the IRS can change the attenuation and scattering of the incident electromagnetic wave so that it can propagate in a desired way toward the intended receiver. Specifically, we consider a downlink multiple-input single-output (MISO) broadcast system where the base station (BS) transmits independent data streams to multiple legitimate receivers and keeps them secret from multiple eavesdroppers. By jointly optimiz…
The IEEE Signal Processing Society is proud to announce the eighth edition of the Signal Processing Cup: an exciting challenge to control a wireless propagation environment using an intelligent reflecting surface. An intelligent reflecting surface is a two-dimensional array of metamaterial whose interaction with electromagnetic waves can be controlled, e.g., by tuning the impedance variations over the surface. These surfaces might be used in the sixth generation (6G) mobile technology to direct wireless signals from a transmitter towards a receiver, to raise the communication performance. The …
An intelligent reflecting surface (IRS) is invoked for enhancing the energy harvesting performance of a simultaneous wireless information and power transfer (SWIPT) aided system. Specifically, an IRS-assisted SWIPT system is considered, where a multi-antenna aided base station (BS) communicates with several multi-antenna assisted information receivers (IRs), while guaranteeing the energy harvesting requirement of the energy receivers (ERs). To maximize the weighted sum rate (WSR) of IRs, the transmit precoding (TPC) matrices of the BS and passive phase shift matrix of the IRS should be jointly…
University of Maryland（马里兰大学）；Intelligent Automation, Inc.（智能自动化公司）
By moving from massive antennas to antenna surfaces for software-defined wireless systems, the reconfigurable intelligent surfaces (RISs) rely on arrays of unit cells to control the scattering and reflection profiles of signals, mitigating the propagation loss and multipath attenuation, and thereby improving the coverage and spectral efficiency. In this paper, covert communication is considered in the presence of the RIS. While there is an ongoing transmission boosted by the RIS, both the intended receiver and an eavesdropper individually try to detect this transmission using their own deep ne…
Over-the-air analog computation allows offloading computation to the wireless environment through carefully constructed transmitted signals. In this paper, we design and implement the first-of-its-kind over-the-air convolution and demonstrate it for inference tasks in a convolutional neural network (CNN). We engineer the ambient wireless propagation environment through reconfigurable intelligent surfaces (RIS) to design such an architecture, which we call 'AirNN'. AirNN leverages the physics of wave reflection to represent a digital convolution, an essential part of a CNN architecture, in the …
In this thesis, we introduce the fundamental equations behind the estimation of the link budget in a communications channel, highlighting the key limitations of conventional systems. Furthermore, we investigate the use of reconfigurable intelligent surfaces as a modern method of overcoming obstruction losses, while making use of numerical methods and computational electromagnetics to understand its physical mechanism and probe its theory of operation. Additionally, a preprint on computational geometry is presented, applicable to the field of computational electromagnetics, enabling the simulat…
Reconfigurable intelligent surface (RIS) based communications have emerged as a new paradigm. This letter proposes a differential reflecting modulation (DRM) scheme for RIS based communication systems. In DRM, information bits are jointly carried by the activation permutations of the reflecting patterns and the phases of the transmitted signals, leading to that DRM can work without any channel state information (CSI) at the transmitter, RIS or receiver. In other words, DRM can release the intricate and resource-consuming channel estimation in the transmission process. Simulation results show t…
This paper presents a spectral attention-driven reinforcement learning based intelligent method for effective and efficient detection of important signals in a wideband spectrum. In the work presented in this paper, it is assumed that the modulation technique used is available as a priori knowledge of the targeted important signal. The proposed spectral attention-driven intelligent method is consists of two main components, a spectral correlation function (SCF) based spectral visualization scheme and a spectral attention-driven reinforcement learning mechanism that adaptively selects the spect…
Reconfigurable Intelligent Surface (RIS) has emerged as one of the key technologies for 6G in recent years, which comprise a large number of low-cost passive elements that can smartly interact with the impinging electromagnetic waves for performance enhancement. However, optimally configuring massive number of RIS elements remains a challenge. In this paper, we present a novel digital-twin framework for RIS-assisted wireless networks which we name it Environment-Twin (Env-Twin). The goal of the Env-Twin framework is to enable automation of optimal control at various granularities. In this pape…
Reconfigurable intelligent surfaces (RISs) have emerged as a promising technique to enhance the system spectral efficiency. This paper investigates the ergodic channel capacity (ECC) of an RIS-aided multiple-input multiple-output channel under the assumption that the transmitter-RIS, RIS-receiver, and transmitter-receiver channels contain deterministic line-of-sight paths. Novel expressions are derived to characterize the upper and lower bounds of the ECC. To unveil more system insights, asymptotic analyses are performed to the system ECC in the limit of large signal-to-noise ratio (SNR) and n…
Intelligent reflective surface (IRS) technology is emerging as a promising performance enhancement technique for next-generation wireless networks. Hence, we investigate the physical layer security of the downlink in IRS-aided non-orthogonal multiple access networks in the presence of an eavesdropper, where an IRS is deployed for enhancing the quality by assisting the cell-edge user to communicate with the base station. To characterize the network's performance, the expected value of the new channel statistics is derived for the reflected links in the case of Nakagami-m fading. Furthermore, th…
We propose a novel design of a dual-function radar communication (DFRC) system aided by an Intelligent Reflecting Surface (IRS). We consider a scenario with one target and multiple communication receivers, where there is no line-of-sight between the radar and the target. The radar precoding matrix and the IRS weights are optimally designed to maximize the weighted sum of the signal-to-noise ratio (SNR) at the radar receiver and the SNR at the communication receivers subject to power constraints and constant modulus constraints on the IRS weights. The problem is decoupled into two sub-problems,…
In the recent years, the proliferation of wireless data traffic has led the scientific community to explore the use of higher unallocated frequency bands, such as the millimeter wave and terahertz (0.1-10 THz) bands. However, they are prone to blockages from obstacles laid in the transceiver path. To address this, in this work, the use of a reconfigurable-intelligent-surface (RIS) to restore the link between a transmitter (TX) and a receiver (RX), operating in the D-band (110-170 GHz) is investigated. The system performance is evaluated in terms of pathgain and capacity considering the RIS des…
In the obstructed tunnels, the signal transmission will suffer the risk of ray-path blocking caused by the obstacles owing to the Snell's law. In this letter, the reconfigurable intelligent surface (RIS) that can reflect the electromagnetic waves to any specific directions is introduced to mitigate the signal blocking. The closed-form expressions for blocking probability (BP) for one reflection with single RIS and multiple RISs under various scenarios are derived. Compared with the case without RIS, significant reduction of BP can be found with proper configuration of the RIS. Moreover, the im…
Intelligent reflective surface (IRS) is an emergent technology for future wireless communications. It consists of a large 2D array of passive scattering elements that control the electromagnetic properties of radio-frequency waves so that the reflected signals add coherently at the intended receiver or destructively to reduce co-channel interference. The promised gains of IRS-assisted communications depend on the accuracy of the channel state information. In this paper, we propose two novel channel estimation methods for an IRS-assisted multiple-input multiple-output (MIMO) communication syste…
Large intelligent surface (LIS) has emerged as a promising new solution to improve the energy and spectrum efficiency of wireless networks. A LIS, composed of a large number of low-cost and energy-efficient reconfigurable passive reflecting elements, enhances wireless communications by reflecting impinging electro-magnetic waves. In this paper, we propose a novel passive beamforming and information transfer (PBIT) technique, in which the LIS simultaneously enhances the primary communication and sends information to the receiver. We develop a passive beamforming method to improve the average re…
High-speed communication and accurate sensing are of vital importance for future transportation system. Integrated sensing and communication (ISAC) system has the advantages of high spectrum efficiency and low hardware cost, satisfying the requirements of sensing and communication. Therefore, ISAC is considered to be a promising technology in the future transportation system. However, due to the low transmit power of signal and the influence of harsh transmission environment on radar sensing, the signal to noise ratio (SNR) at the radar receiver is low, which affects the sensing performance. T…
School of Information and Communications Engineering, Xi’an Jiaotong University（西安交通大学信息与通信工程学院）；School of Computer Science & Technology, Xi’an University of Posts & Telecommunications（西安邮电大学计算机科学与技术学院）
Reconfigurable intelligent surfaces (RISs), which enable tunable anomalous reflection, have appeared as a promising method to enhance wireless systems. In this paper, we propose to use an RIS as a spatial equalizer to address the well-known multi-path fading phenomenon. By introducing some controllable paths artificially against the multi-path fading through the RIS, we can perform equalization during the transmission process instead of at the receiver, and thus all the users can share the same equalizer. Unlike the beamforming application of the RIS, which aims to maximize the received energy…
We consider a two--tile reconfigurable intelligent surface (RIS) assisted wireless network with a two-antenna transmitter and receiver over Rayleigh fading. We show that the average received signal-to-noise-ratio (SNR) optimal transmission and combining vectors are given by the left and right singular spaces of the RIS-receiver and transmit-RIS channel matrices, respectively. Moreover, the optimal phases at the two tiles of the RIS are determined by the phases of the elements of the latter spaces. To further study the effect of phase compensation, we statistically characterize the average SNR …
Cognitive radio (CR) is an effective solution to improve the spectral efficiency (SE) of wireless communications by allowing the secondary users (SUs) to share spectrum with primary users. Meanwhile, intelligent reflecting surface (IRS), also known as reconfigurable intelligent surface (RIS), has been recently proposed as a promising approach to enhance energy efficiency (EE) of wireless communication systems through intelligently reconfiguring the channel environment. To improve both SE and EE, in this paper, we introduce multiple IRSs to a downlink multiple-input single-output (MISO) CR syst…
In this paper, secure wireless information and power transfer with intelligent reflecting surface (IRS) is proposed for a multiple-input single-output (MISO) system. Under the secrecy rate (SR) and the reflecting phase shifts of IRS constraints, the secure transmit beamforming at access point (AP) and phase shifts at IRS are jointly optimized to maximize the harvested power of energy harvesting receiver (EHR). Due to the non-convexity of optimization problem and coupled optimization variables, firstly, we convert the optimization problem into a semidefinite relaxation (SDR) problem and a sub-o…
A communication link aided by a reconfigurable intelligent surface (RIS) is studied in which the transmitter can control the state of the RIS via a finite-rate control link. Channel state information (CSI) is acquired at the receiver based on pilot-assisted channel estimation, and it may or may not be shared with the transmitter. Considering quasi-static fading channels with imperfect CSI, capacity-achieving signalling is shown to implement joint encoding of the transmitted signal and of the response of the RIS. This demonstrates the information-theoretic optimality of RIS-based modulation, or…
As one of the key technologies for the sixth generation (6G) mobile communications, intelligent reflecting surface IRS) has the advantages of low power consumption, low cost, and simple design methods. But channel modeling is still an open issue in this field currently. In this paper, we propose a three-dimensional (3D) geometry based stochastic model (GBSM) for a massive multiple-input multiple-output (MIMO) communication system employing IRS. The model supports the movements of the transmitter, the receiver, and clusters. The evolution of clusters on the linear array and planar array is also…
Simultaneous wireless information and power transfer (SWIPT) and intelligent reflecting surface (IRS) are two promising techniques for providing enhanced wireless communication capability and sustainable energy supply to energy-constrained wireless devices. Moreover, the combination of the IRS and the SWIPT can create the "one plus one greater than two" effect. However, due to the broadcast nature of wireless media, the IRS-aided SWIPT systems are vulnerable to eavesdropping. In this paper, we study the security issue of the IRS-aided SWIPT systems. The objective is to maximize the secrecy rat…
Free-space optical (FSO) systems are able to offer the high data-rate, secure, and cost-efficient communication links required for applications such as wireless front- and backhauling for 5G and 6G communication networks. Despite the substantial advancement of FSO systems over the past decades, the requirement of a line-of-sight connection between transmitter and receiver remains a key limiting factor for their deployment. In this paper, we discuss the potential role of intelligent reflecting surfaces (IRSs) as a solution to relax this requirement. We present an overview of existing optical IR…
We propose a novel reconfigurable intelligent surface (RIS) encoded information transmission scheme for a line-of-sight environment. A RIS fed with data modulates the information on impinging waves emitted from an external source in the states of polarization (SoP) of the scattered waves by performing a novel differential polarization shift keying. In particular, the information is encoded in the change of the SoP over two successive scattering slots. The proposed scheme is immune to the SoP fluctuations in the wireless channel which allows for non-coherent detection at the receiver.
