Reconfigurable intelligent surfaces (RISs), which enable tunable anomalous reflection, have appeared as a promising method to enhance wireless systems. In this paper, we propose to use an RIS as a spatial equalizer to address the well-known multi-path fading phenomenon. By introducing some controllable paths artificially against the multi-path fading through the RIS, we can perform equalization during the transmission process instead of at the receiver, and thus all the users can share the same equalizer. Unlike the beamforming application of the RIS, which aims to maximize the received energy at receivers, the objective of the equalization application is to reduce the inter-symbol interference (ISI), which makes phase shifts at the RIS different. To this end, we formulate the phase shift optimization problem and propose an iterative algorithm to solve it. Simulation results show that the multi-path fading effect can be eliminated effectively compared to benchmark schemes.
Reconfigurable intelligent surface (RIS)-empowered communications is on the rise and is a promising technology envisioned to aid in 6G and beyond wireless communication networks. RISs can manipulate impinging waves through their electromagnetic elements enabling some sort of control over the wireless channel. In this paper, the potential of RIS technology is explored to perform a sort of virtual equalization over-the-air for frequency-selective channels whereas, equalization is generally conducted at either the transmitter or receiver in conventional communication systems. Specifically, with t…
Exploiting wavefront curvature enables localization with limited infrastructure and hardware complexity. With the introduction of reconfigurable intelligent surfaces (RISs), new opportunities arise, in particular when the RIS is functioning as a lens receiver. We investigate the localization of a transmitter using a RIS-based lens in close proximity to a single receive antenna element attached to reception radio frequency chain. We perform a Fisher information analysis, evaluate the impact of different lens configurations, and propose a two-stage localization algorithm. Our results indicate th…
Transmission through reconfigurable intelligent surfaces (RISs), which control the reflection/scattering characteristics of incident waves in a deliberate manner to enhance the signal quality at the receiver, appears as a promising candidate for future wireless communication systems. In this paper, we bring the concept of RIS-assisted communications to the realm of index modulation (IM) by proposing RIS-space shift keying (RIS-SSK) and RIS-spatial modulation (RIS-SM) schemes. These two schemes are realized through not only intelligent reflection of the incoming signals to improve the reception…
Over-the-air computation (AirComp) is a promising technology that is capable of achieving fast data aggregation in Internet of Things (IoT) networks. The mean-squared error (MSE) performance of AirComp is bottlenecked by the unfavorable channel conditions. This limitation can be mitigated by deploying a reconfigurable intelligent surface (RIS), which reconfigures the propagation environment to facilitate the receiving power equalization. The achievable performance of RIS relies on the availability of accurate channel state information (CSI), which however is generally difficult to be obtained.…
In this paper, a cyclic-prefixed single-carrier (CPSC) transmission scheme with phase shift keying (PSK) signaling is presented for broadband wireless communications systems empowered by a reconfigurable intelligent surface (RIS). In the proposed CPSC-RIS, the RIS is configured according to the transmitted PSK symbols such that different cyclically delayed versions of the incident signal are created by the RIS to achieve multipath diversity. A practical and efficient channel estimator is developed for CPSC-RIS and the mean square error of the channel estimation is expressed in closed-form. We …
Antenna array technology enables directional transmission and reception of wireless signals, for communications, localization, and sensing purposes. The signal processing algorithms that underpin this technology began to be developed several decades ago [1], but it is first with the ongoing deployment of the fifth-generation (5G) wireless mobile networks that it becomes a mainstream technology [2]. The number of antenna elements in the arrays of the 5G base stations and user devices can be measured at the order of 100 and 10, respectively. As the networks shift towards using higher frequency b…
As a prospective key technology for the next-generation wireless communications, reconfigurable intelligent surfaces (RISs) have gained tremendous research interest in both the academia and industry in recent years. Only limited knowledge, however, has been obtained about the channel eigenvalue characteristics and spatial degrees of freedom (DoF) of systems containing RISs, especially when mutual coupling (MC) is present between the array elements. In this paper, we focus on the small-scale spatial correlation and eigenvalue properties excluding and including MC effects, for RISs with a quasi-…
Light fidelity (LiFi), which is based on visible light communications (VLC), is celebrated as a cutting-edge technological paradigm that is envisioned to be an indispensable part of 6G systems. Nonetheless, LiFi performance is subject to efficiently overcoming the line-of-sight blockage, whose adverse effect on wireless reception reliability becomes even more pronounced in highly dynamic environments, such as vehicular application scenarios. Meanwhile, reconfigurable intelligent surfaces (RIS) emerged recently as a revolutionary concept that transfers the physical propagation environment into …
One of the key enablers of future wireless communications is constituted by massive multiple-input multiple-output (MIMO) systems, which can improve the spectral efficiency by orders of magnitude. However, in existing massive MIMO systems, conventional phased arrays are used for beamforming, which result in excessive power consumption and hardware cost. Recently, reconfigurable intelligent surface (RIS) has been considered as one of the revolutionary technologies to enable energy-efficient and smart wireless communications, which is a two-dimensional structure with a large number of passive el…
Programmable radio environments parametrized by reconfigurable intelligent surfaces (RISs) are emerging as a new wireless communications paradigm, but currently used channel models for the design and analysis of signal-processing algorithms cannot include fading in a manner that is faithful to the underlying wave physics. To overcome this roadblock, we introduce a physics-based end-to-end model of RIS-parametrized wireless channels with adjustable fading (coined PhysFad) which is based on a first-principles coupled-dipole formalism. PhysFad naturally incorporates the notions of space and causa…
Physical-layer key generation methods utilize the variations of the communication channel to achieve a secure key agreement between two parties with no prior security association. Their secrecy rate (bit generation rate) depends heavily on the randomness of the channel, which may reduce significantly in a stable environment. Existing methods seek to improve the secrecy rate by injecting artificial noise into the channel. Unfortunately, noise injection cannot alter the underlying channel state, which depends on the multipath environment between the transmitter and receiver. Consequently, these …
