This paper considers the problem of estimating the sparse millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) OFDM channel from 1-bit quantized measurements. Unlike previous quantized on-grid approaches to compressive sensing, we introduce an off-grid convex scheme which uses binary atomic norm minimization (BiANM) to estimate sparse channel form 1-bit measurements. Moreover, in this paper, we propose a decoupled angle-delay version of BiANM called decoupled binary atomic norm minimization (DeBiANM) in order to reduce complexity. Further, for improving the accuracy of the estimation, we develop reweighted version of BiANM named reweighted binary atomic norm minimization (ReBiANM) that is a trade-off between atomic $\ell_0$ norm and atomic $\ell_1$ norm. Also, for improvement the performance of the DeBiANM, we introduce the reweighted version of DeBiANM, termed as reweighted decoupled binary atomic minimization (ReDeBiANM). Finally, through the simulation results, the performance of the proposed methods are studied.
This paper considers the problem of estimating the sparse mmWave massive multiple input - multiple output (MIMO) OFDM channel from one-bit quantized measurements. Unlike previous grid-based one-bit compressive sensing approaches, we present a gridless convex method to recover sparse channel form one-bit measurements via Binary Atomic Norm Minimization (BiANM) and Reweighted Binary Atomic Norm Minimization (ReBiANM). Simulation results verify the accuracy of the binary and reweighted binary atomic norm minimization techniques.
Due to the increasing demand for low power and higher sampling rates, low resolution quantization for data acquisition has drawn great attention recently. Consequently, line spectral estimation (LSE) with multiple measurement vectors (MMVs) from coarsely quantized samples is of vital importance in cutting edge array signal processing applications such as range estimation and DOA estimation in millimeter wave radar systems. In this paper, we combine the low complexity gridless variational line spectral estimation (VALSE) and expectation propagation (EP) and propose an MVALSE-EP algorithm to est…
We investigate the one-bit MIMO (1b-MIMO) radar that performs one-bit sampling with a time-varying threshold in the temporal domain and employs compressive sensing in the spatial and Doppler domains. The goals are to significantly reduce the hardware cost, energy consumption, and amount of stored data. The joint angle and Doppler frequency estimations from noisy one-bit data are studied. By showing that the effect of noise on one-bit sampling is equivalent to that of sparse impulsive perturbations, we formulate the one-bit $\ell_1$-regularized atomic-norm minimization (1b-ANM-L1) problem to ac…
Millimeter-wave communication has the potential to deliver orders of magnitude increases in mobile data rates. A key design challenge is to enable rapid beam alignment with phased arrays. Traditional millimeter-wave systems require a high beam alignment overhead, typically an exhaustive beam sweep, to find the beam direction with the highest beamforming gain. Compressive sensing is a promising framework to accelerate beam alignment. However, model mismatch from practical array hardware impairments poses a challenge to its implementation. In this work, we introduce a neural network assisted com…
This paper proposes the Newtonized fully corrective forward greedy selection-cross validation-based (NFCFGS-CV-based) channel estimator for millimeter (mmWave) hybrid massive multiple-input multiple-output (MIMO) systems with low-resolution analog-to-digital converters (ADCs). The proposed NFCFGS algorithm is a gridless compressed sensing (CS) technique that combines the FCFGS and Newtonized orthogonal matching pursuit (NOMP) algorithms. In particular, NFCFGS performs single path estimation over the continuum at each iteration based on the previously estimated paths. The CV technique is adopte…
We develop a direction of arrival (DoA) and channel estimation algorithm for the one-bit quantized millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) system. By formulating the estimation problem as a noisy one-bit compressed sensing problem, we propose a computationally efficient gridless solution based on the expectation-maximization generalized approximate message passing (EMGAMP) approach. The proposed algorithm does not need the prior knowledge about the number of DoAs and outperforms the existing methods in distinguishing extremely close DoAs for the case of one-bit q…
Millimeter wave beam alignment (BA) is a challenging problem especially for large number of antennas. Compressed sensing (CS) tools have been exploited due to the sparse nature of such channels. This paper presents a novel deterministic CS approach for BA. Our proposed sensing matrix which has a Kronecker-based structure is sparse, which means it is computationally efficient. We show that our proposed sensing matrix satisfies the restricted isometry property (RIP) condition, which guarantees the reconstruction of the sparse vector. Our approach outperforms existing random beamforming technique…
Employing low-resolution analog-to-digital converters (ADCs) coupled with large antenna arrays at the receivers has drawn considerable interests in the millimeter wave (mm-wave) system. Since mm-wave channels are sparse in angular dimensions, exploiting the structure could reduce the number of measurements while achieve acceptable performance at the same time. Motivated by the variational Bayesian line spectral estimation (VALSE) algorithm which treats the angles as random parameters, in contrast with previous works which confine the estimate to the set of grid angle points and induce grid mis…
Initial access (IA) is a fundamental physical layer procedure in cellular systems where user equipment (UE) detects nearby base station (BS) as well as acquire synchronization. Due to the necessity of using antenna array in millimeter-wave (mmW) IA, the channel spatial information can also be inferred. The state-of-the-art directional IA (DIA) uses sector sounding beams with limited angular resolution, and thus requires additional dedicated radio resources, access latency and overhead for refined beam training. To remedy the problem of access latency and overhead in DIA, this work proposes to …
This letter presents the first experimental results of our three-dimensional (3D) millimeter-wave (mm-wave) Compressive-Reflector-Antenna (CRA) imaging system. In this prototype, the CRA is 3D-printed and coated with a metallic spray to easily introduce pseudo-random scatterers on the surface of a traditional reflector antenna (TRA). The CRA performs a pseudo random coding of the incident wavefront, thus adding spatial diversity in the imaging region and enabling the effective use of compressive sensing (CS) and imaging techniques. The CRA is fed with a multiple-input-multiple-output (MIMO) ra…
Compressive approaches provide a means of effective channel high resolution channel estimates in millimeter wave MIMO systems, despite the use of analog and hybrid architectures. Such estimates can also be used as part of a joint channel estimation and localization solution. Achieving good localization performance, though, requires high resolution channel estimates and better methods to exploit those channels. In this paper, we propose a low complexity multidimensional orthogonal matching pursuit strategy for compressive channel estimation based by operating with a product of independent dicti…
Future wireless networks may operate at millimeter-wave (mmW) and sub-terahertz (sub-THz) frequencies to enable high data rate requirements. While large antenna arrays are critical for reliable communications at mmW and sub-THz bands, these antenna arrays would also mandate efficient and scalable initial beam alignment and link maintenance algorithms for mobile devices. Low-power phased-array architectures and phase-less power measurements due to high frequency oscillator phase noise pose additional challenges for practical beam tracking algorithms. Traditional beam tracking protocols require …
Channel estimation (CE) for millimeter-wave (mmWave) lens-array suffers from prohibitive training overhead, whereas the state-of-the-art solutions require an extra complicated radio frequency phase shift network. By contrast, lens-array using antenna switching network (ASN) simplifies the hardware, but the associated CE is a challenging task due to the constraint imposed by ASN. This paper proposes a compressive sensing (CS)-based CE solution for full-dimensional (FD) lens-array, where the mmWave channel sparsity is exploited. Specifically, we first propose an approach of pilot training under …
Existing three-dimensional (3-D) compressive sensing-based millimeter-wave (MMW) imaging methods require a large-scale storage of the sensing matrix and immense computations owing to the high dimension matrix-vector model employed in the optimization. To overcome this shortcoming, we propose an efficient compressive sensing (CS) method based on a holographic algorithm for near-field 3-D MMW imaging. An interpolation-free holographic imaging algorithm is developed and used as a sensing operator, in lieu of the nominal sensing matrix typically used in the CS iterative optimization procedure. In …
Communication systems at millimeter-wave (mmW) and sub-terahertz frequencies are of increasing interest for future high-data rate networks. One critical challenge faced by phased array systems at these high frequencies is the efficiency of the initial beam alignment, typically using only phase-less power measurements due to high frequency oscillator phase noise. Traditional methods for beam alignment require exhaustive sweeps of all possible beam directions, thus scale communications overhead linearly with antenna array size. For better scaling with the large arrays required at high mmW bands,…
The large beamforming gain used to operate at millimeter wave (mmWave) frequencies requires obtaining channel information to configure hybrid antenna arrays. Previously proposed wideband channel estimation strategies, however, assume perfect time-frequency synchronization and neglect phase noise, making these approaches impractical. Consequently, achieving time-frequency synchronization between transmitter and receiver and correcting for phase noise (PN) as the channel is estimated, is the greatest challenge yet to be solved in order to configure hybrid precoders and combiners in practical set…
In the area of near-field millimeter-wave imaging, the generalized sparse array synthesis (SAS) method is in great demand. The traditional methods usually employ the greedy algorithms, which may have the convergence problem. This paper proposes a convex optimization model for the multiple-input multiple-output (MIMO) array design based on the compressive sensing (CS) approach. We generate a block shaped reference pattern, to be used as an optimizing target. The pattern occupies the entire imaging area of interest in order to involve the effect of each pixel into the optimization model. In MIMO…
Millimeter (mm) wave massive MIMO has the potential for delivering orders of magnitude increases in mobile data rates, with compact antenna arrays providing narrow steerable beams for unprecedented levels of spatial reuse. A fundamental technical bottleneck, however, is rapid spatial channel estimation and beam adaptation in the face of mobility and blockage. Recently proposed compressive techniques which exploit the sparsity of mm wave channels are a promising approach to this problem, with overhead scaling linearly with the number of dominant paths and logarithmically with the number of arra…
Millimeter wave (mmWave) communication is one viable solution to support Gbps sensor data sharing in vehicular networks. The use of large antenna arrays at mmWave and high mobility in vehicular communication make it challenging to design fast beam alignment solutions. In this paper, we propose a novel framework that learns the channel angle-of-departure (AoD) statistics at a base station (BS) and uses this information to efficiently acquire channel measurements. Our framework integrates online learning for compressive sensing (CS) codebook learning and the optimized codebook is used for CS-bas…
High resolution compressive channel estimation provides information for vehicle localization when a hybrid mmWave MIMO system is considered. Complexity and memory requirements can, however, become a bottleneck when high accuracy localization is required. An additional challenge is the need of path order information to apply the appropriate geometric relationships between the channel path parameters and the vehicle, RSU and scatterers position. In this paper, we propose a low complexity channel estimation strategy of the angle of departure and time difference of arrival based on multidimensiona…
Intelligent reflecting surface (IRS) has emerged as a competitive solution to address blockage issues in millimeter wave (mmWave) and Terahertz (THz) communications due to its capability of reshaping wireless transmission environments. Nevertheless, obtaining the channel state information of IRS-assisted systems is quite challenging because of the passive characteristics of the IRS. In this paper, we consider the problem of beam training/alignment for IRS-assisted downlink mmWave/THz systems, where a multi-antenna base station (BS) with a hybrid structure serves a single-antenna user aided by …
This paper presents a comparative study on millimeter wave (mmWave) location-based analog beamforming (BF) techniques based on channel estimation. Localization and compressive sensing (CS) effectively reduces mmWave BF complexity and enhance the performance of mmWave system comparable to the conventional mmWave analog BF techniques. BF techniques based on channel state information (CSI) has high complexity in constructing mmWave channel sensing matrix using CS. Location services based techniques highly reduce this complexity by defining the area within which the user equipment (UE) mostly prob…
RIS-aided millimeter wave wireless systems benefit from robustness to blockage and enhanced coverage. In this paper, we study the ability of RIS to also provide enhanced localization capabilities as a by-product of communication. We consider sparse reconstruction algorithms to obtain high resolution channel estimates that are mapped to position information. In RIS-aided mmWave systems, the complexity of sparse recovery becomes a bottleneck, given the large number of elements of the RIS and the large communication arrays. We propose to exploit a multidimensional orthogonal matching pursuit stra…
This paper presents three distributed techniques to find a sparse solution of the underdetermined linear problem $\textbf{g}=\textbf{Hu}$ with a norm-1 regularization, based on the Alternating Direction Method of Multipliers (ADMM). These techniques divide the matrix $\textbf{H}$ in submatrices by rows, columns, or both rows and columns, leading to the so-called consensus-based ADMM, sectioning-based ADMM, and consensus and sectioning-based ADMM, respectively. These techniques are applied particularly for millimeter-wave imaging through the use of a Compressive Reflector Antenna (CRA). The CRA…
Beijing Institute of Technology（北京理工大学）；CNRS（法国国家科学研究中心）；CentraleSupélec（中央理工-高等电力学院）；Université Paris-Saclay（巴黎-萨克雷大学）；King Abdullah University of Science and Technology（阿卜杜拉国王科技大学）
Integrating large intelligent reflecting surfaces (IRS) into millimeter-wave (mmWave) massive multi-input-multi-ouput (MIMO) has been a promising approach for improved coverage and throughput. Most existing work assumes the ideal channel estimation, which can be challenging due to the high-dimensional cascaded MIMO channels and passive reflecting elements. Therefore, this paper proposes a deep denoising neural network assisted compressive channel estimation for mmWave IRS systems to reduce the training overhead. Specifically, we first introduce a hybrid passive/active IRS architecture, where v…
Reconfigurable intelligent surfaces (RISs) have been introduced as a remedy for mitigating frequent blockages in millimeter wave (mmWave) multiple-input multiple-output (MIMO) communication networks. However, perfect or nearly perfect channel state information (CSI) is fundamental in order to achieve their full potential. Traditionally, an RIS is fully passive without any baseband processing capabilities, which poses great challenges for CSI acquisition. Thus, we focus on the hybrid RIS architecture, where a small portion of RIS elements are active and able to processing the received pilot sig…
In this paper, a channel estimator for wideband millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems with hybrid architectures and low-resolution analog-to-digital converters (ADCs) is proposed. To account for the propagation delay across the antenna array, which cannot be neglected in wideband mmWave massive MIMO systems, the discrete time channel that models the spatial wideband effect is developed. Also, the training signal design that addresses inter-frame, inter-user, and inter-symbol interferences is investigated when the spatial wideband effect is not negligibl…
Due to their ability to create favorable line-of-sight (LoS) propagation environments, intelligent reflecting surfaces (IRSs) are regarded as promising enablers for future millimeter-wave (mm-wave) wireless communication. In this paper, we investigate channel estimation for IRS-assisted mm-wave multiple-input multiple-output (MIMO) {\color{black}wireles}s systems. By leveraging the sparsity of mm-wave channels in the angular domain, we formulate the channel estimation problem as an $\ell_1$-norm regularized optimization problem with fixed-rank constraints. To tackle the non-convexity of the fo…
Millimeter-wave (mmWave) communications have been one of the promising technologies for future wireless networks that integrate a wide range of data-demanding applications. To compensate for the large channel attenuation in mmWave band and avoid high hardware cost, a lens-based beamspace massive multiple-input multiple-output (MIMO) system is considered. However, the beam squint effect in wideband mmWave systems makes channel estimation very challenging, especially when the receiver is equipped with a limited number of radio-frequency (RF) chains. Furthermore, the real channel data cannot be o…
Hybrid analog/digital architectures and receivers with low-resolution analog-to-digital converters (ADCs) are two low power solutions for wireless systems with large antenna arrays. Most prior work represents two extreme cases in which either a small number of radio frequency (RF) chains with full-resolution ADCs, or low-resolution ADC with a number of RF chains equal to the number of antennas is assumed. In this paper, a generalized hybrid architecture with a small number of RF chains and a finite number of ADC bits is proposed. In such a system, the received signal suffers from two compressi…
Low overhead channel estimation based on compressive sensing (CS) has been widely investigated for hybrid wideband millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. The channel sparsifying dictionaries used in prior work are built from ideal array response vectors evaluated on discrete angles of arrival/departure. In addition, these dictionaries are assumed to be the same for all subcarriers, without considering the impacts of hardware impairments and beam squint. In this manuscript, we derive a general channel and signal model that explicitly incorporates the impacts of …
This paper proposes a novel neural network architecture, that we call an auto-precoder, and a deep-learning based approach that jointly senses the millimeter wave (mmWave) channel and designs the hybrid precoding matrices with only a few training pilots. More specifically, the proposed machine learning model leverages the prior observations of the channel to achieve two objectives. First, it optimizes the compressive channel sensing vectors based on the surrounding environment in an unsupervised manner to focus the sensing power on the most promising spatial directions. This is enabled by a no…
Channel acquisition is one of the main challenges for the deployment of reconfigurable intelligent surface (RIS) aided communication systems. This is because an RIS has a large number of reflective elements, which are passive devices with no active transmitting/receiving abilities. In this paper, we study the channel estimation problem for the RIS aided multi-user millimeter-wave (mmWave) multi-input multi-output (MIMO) system. Specifically, we propose a novel channel estimation protocol for the above system to estimate the cascaded channels, which are the products of the channels from the bas…
In wideband millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems, channel estimation is challenging due to the hybrid analog-digital architecture, which compresses the received pilot signal and makes channel estimation a compressive sensing (CS) problem. However, existing high-performance CS algorithms usually suffer from high complexity. On the other hand, the beam squint effect caused by huge bandwidth and massive antennas will deteriorate estimation performance. In this paper, frequency-dependent angular dictionaries are first adopted to compensate for beam squint.…
In millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems, one-bit analog-to-digital converters (ADCs) are employed to reduce the impractically high power consumption, which is incurred by the wide bandwidth and large arrays. In practice, the mmWave band consists of a small number of paths, thereby rendering sparse virtual channels. Then, the resulting maximum a posteriori (MAP) channel estimation problem is a sparsity-constrained optimization problem, which is NP-hard to solve. In this paper, iterative approximate MAP channel estimators for mmWave massive MIMO systems …
Exploiting channel sparsity at millimeter wave (mmWave) frequencies reduces the high training overhead associated with the channel estimation stage. Compressive sensing (CS) channel estimation techniques usually adopt the (overcomplete) wavelet/Fourier transform matrix as a sparsifying dictionary. This may not be the best choice when considering non-uniform arrays, antenna gain/phase errors, mutual coupling effects, etc. We propose two dictionary learning (DL) algorithms to learn the best sparsifying dictionaries for channel matrices from observations obtained with hybrid frequency-selective m…
Multiple-input multiple-output (MIMO) millimeter wave (mmWave) communication is a key technology for next generation wireless networks. One of the consequences of utilizing a large number of antennas with an increased bandwidth is that array steering vectors vary among different subcarriers. Due to this effect, known as beam squint, the conventional channel model is no longer applicable for mmWave massive MIMO systems. In this paper, we study channel estimation under the resulting non-standard model. To that aim, we first analyze the beam squint effect from an array signal processing perspecti…
Channel estimation for hybrid Multiple Input Multiple Output (MIMO) systems at Millimeter-Waves (mmW)/sub-THz is a fundamental, despite challenging, prerequisite for an efficient design of hybrid MIMO precoding/combining. Most works propose sequential search algorithms, e.g., Compressive Sensing (CS), that are most suited to static channels and consequently cannot apply to highly dynamic scenarios such as Vehicle-to-Everything (V2X). To address the latter ones, we leverage \textit{recurrent vehicle passages} to design a novel Multi Vehicular (MV) hybrid MIMO channel estimation suited for Vehic…
Millimeter wave (mmWave) full-duplex (FD) is a promising technique for improving capacity by maximizing the utilization of both time and the rich mmWave frequency resources. Still, it has restrictions due to FD self-interference (SI) and mmWave's limited coverage. Therefore, this study dives into FD mmWave MIMO with the assistance of reconfigurable intelligent surfaces (RIS) for capacity improvement. First, we demonstrate the angular-domain reciprocity of FD antenna arrays under the far-field planar wavefront assumption. Accordingly, a strategy for joint downlink-uplink (DL-UL) channel estimat…
Hybrid analog-digital (HAD) architecture is widely adopted in practical millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems to reduce hardware cost and energy consumption. However, channel estimation in the context of HAD is challenging due to only limited radio frequency (RF) chains at transceivers. Although various compressive sensing (CS) algorithms have been developed to solve this problem by exploiting inherent channel sparsity and sparsity structures, practical effects, such as power leakage and beam squint, can still make the real channel features deviate from…
DiffPace: Diffusion-based Plug-and-play Augmented Channel Estimation in mmWave and Terahertz Ultra-Massive MIMO Systems
Terahertz Wireless Communications (TWC) Laboratory, Shanghai Jiao Tong University（太赫兹无线通信实验室，上海交通大学）；Cooperative Medianet Innovation Center (CMIC), School of Information Science and Electronic Engineering, Shanghai Jiao Tong University（协作中位网创新中心（CMIC），信息科学与电子工程学院，上海交通大学）；Institute for Digital Communications, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)（数字通信研究所，弗赖堡-亚历山大-大学埃尔朗根-纽伦堡（FAU））
