We investigated the behavior of H$_2$, main constituent of the gas phase in dense clouds, after collision with amorphous solid water (ASW) surfaces, one of the most abundant chemical species of interstellar ices. We developed a general framework to study the adsorption dynamics of light species on interstellar ices. We provide binding energies and their distribution, sticking probabilities for incident energies between 1 meV and 60 meV, and thermal sticking coefficients between 10 and 300 K for surface temperatures from 10 to 110 K. We found that the sticking probability depends strongly on the adsorbate kinetic energy and the surface temperature, but hardly on the angle of incidence. We observed finite sticking probabilities above the thermal desorption temperature. Adsorption and thermal desorption should be considered as separate events with separate time scales. Laboratory results for these species have shown a gap in the trends attributed to the differently employed experimental techniques. Our results complement observations and extend them, increasing the range of gas temperatures under consideration. We plan to employ our method to study a variety of adsorbates, including radical and charged species.
This joint theoretical and experimental study establishes that the adsorption of polycyclic aromatic hydrocarbons (PAHs) onto the amorphous ice surface provokes a broadening and redshift of the "dangling" OH (dOH) ice spectral feature, the redshift increasing with PAH size up to $\sim$ 85~cm$^{-1}$. It also reveals that, in certain interaction configurations, adsorption induces substantial reorganisation of the hydrogen-bonding network at the ice surface. Comparison with experiments validates the novel theoretical methodology relying on the density functional based tight binding approach, whic…
Gas-grain and gas-phase reactions dominate the formation of molecules in the interstellar medium (ISM). Gas-grain reactions require a substrate (e.g. a dust or ice grain) on which the reaction is able to occur. The formation of molecular hydrogen (H$_2$) in the ISM is the prototypical example of a gas-grain reaction. In these reactions, an atom of hydrogen will strike a surface, stick to it, and diffuse across it. When it encounters another adsorbed hydrogen atom, the two can react to form molecular hydrogen and then be ejected from the surface by the energy released in the reaction. We perfor…
The long-timescale behavior of adsorbed carbon monoxide on the surface of amorphous water ice is studied under dense cloud conditions by means of off-lattice, on-the-fly, kinetic Monte Carlo simula- tions. It is found that the CO mobility is strongly influenced by the morphology of the ice substrate. Nanopores on the surface provide strong binding sites which can effectively immobilize the adsorbates at low coverage. As the coverage increases, these strong binding sites are gradually occupied leav- ing a number of admolecules with the ability to diffuse over the surface. Binding energies, and …
Reactions at solid-water interfaces play a foundational role in water treatment systems, catalysis, chemical separations, and in predicting chemical fate and transport in the environment. Over the last century, experimental measurements and computational models have made tremendous progress in capturing reactions at solid surfaces. The interfacial reactivity of a solid surface, however, can change dramatically and unexpectedly when it is confined to the nanoscale. Nanoconfinement can arise in different geometries such as pores/cages (3-D confinement), channels (2-D confinement) and slits (1-D …
We present a comprehensive benchmark study of the adsorption energy of a single water molecule on the (001) LiH surface using periodic coupled cluster and quantum Monte Carlo theories. We benchmark and compare different implementations of quantum chemical wave function based theories in order to verify the reliability of the predicted adsorption energies and the employed approximations. Furthermore we compare the predicted adsorption energies to those obtained employing widely-used van der Waals density-functionals. Our findings show that quantum chemical approaches are becoming a robust and r…
Plateaus in water adsorption isotherms on hydroxylated BeO surfaces suggest significant differences between the hydroxylated (100) and (001) surface structures and reactivities. Density functional theory structures and energies clarify these differences. Using relaxed surface energies, a Wulff construction yields a prism crystal shape exposing long (100) sides and much smaller (001) faces. This is consistent with the BeO prisms observed when beryllium metal is oxidized. A water oxygen atom binds to a single surface beryllium ion in the preferred adsorption geometry on either surface. The water…
As a persistent pollutant, PFOA places a serious threat to natural ecosystems and human health for its global distribution and residual. Currently, adsorption technology is a promising approach for PFOA removal. MOFs become a concerned adsorbent attributing to its special designability and easy modular synthesis. Aiming at improving hydrophobic interactions to absorb PFOA, this study was designed to introduce amino group to decorate Zr-based MOF UiO-66. And subsequently introduced GO to modify UiO-66-NH2 to explore the influence of hydrophobicity on PFOA adsorption removal. Based on the perfor…
The adsorption and dissociation of isolated water molecule on Zr(0001) surface are theoretically investigated for the first time by using density-functional theory calculations. Two kinds of adsorption configurations with almost the same adsorption energy are identified as the locally stable states, i.e., the flat and upright configurations respectively. It is shown that the flat adsorption states on the top site are dominated by the 1$b_{1}$-$d$ band coupling, insensitive to the azimuthal orientation. The diffusion between adjacent top sites reveals that the water molecule is very mobile on t…
Investigating how formamide forms in the interstellar medium is a hot topic in astrochemistry, which can contribute to our understanding of the origin of life on Earth. We have constructed a QM/MM model to simulate the hydrogenation of isocyanic acid on amorphous solid water surfaces to form formamide. The binding energy of HNCO on the ASW surface varies significantly between different binding sites, we found values between $\sim$0 and 100 kJ mol$^{-1}$. The barrier for the hydrogenation reaction is almost independent of the binding energy, though. We calculated tunneling rate constants of H +…
The curvature dependence of the physisorption properties of a water molecule inside and outside an armchair carbon nanotube (CNTs) is investigated by an incremental density-fitting local coupled cluster treatment with single and double excitations and perturbative triples (DF-LCCSD(T)) study. Our results show that a water molecule outside and inside (n, n) CNTs (n=4, 5, 6, 7, 8, 10) is stabilized by electron correlation. The adsorption energy of water inside CNTs decreases quickly with the decrease of curvature (increase of radius) and the configuration with the oxygen pointing towards the CNT…
The surface processes on interstellar dust grains have an important role in the chemical evolution in molecular clouds. Hydrogenation reactions on ice surfaces have been extensively investigated and are known to proceed at low temperatures mostly below 20 K. In contrast, information about the chemical processes of molecules within an ice mantle is lacking. In this work, we investigated diffusive hydrogenation reactions of carbon monoxide (CO) embedded in amorphous solid water (ASW) as a model case and discovered that the hydrogenation of CO efficiently proceeds to yield H2CO and CH3OH even abo…
The lack of accurate low-energy electron scattering cross sections for liquid water is a substantial source of uncertainty in the modelling of radiation chemistry and biology. The use of existing amorphous ice scattering cross sections for lack of liquid data has been discussed controversially over decades. Here, we compare experimental photoemission data of liquid water with corresponding predictions using amorphous ice cross sections, with the aim of resolving the debate regarding the difference of electron scattering in liquid water and amorphous ice. We find very similar scattering propert…
Infrared (IR) multiple-angle incidence resolution spectrometry (IR-MAIRS) is a recently developed spectroscopic technique that combines oblique incidence transmission measurements and chemometrics (multivariate analysis) to obtain both pure in-plane (IP) and out-of-plane (OP) vibration spectra for a thin sample. IR-MAIRS is established for analyzing the molecular orientation of organic thin films at atmospheric pressure, but it should also be powerful for the structural characterization of vapor-deposited thin samples prepared in a vacuum. The application of IR-MAIRS to vapor-deposited amorpho…
The atomic scale insights into the interaction of water with oxide surface are essential for elucidating the mechanism of physiochemical processes in various scientific and practical fields, since the water is ubiquitous and coats multifarious material surface under ambient conditions. By utilizing periodic density functional theory calculations with van der Waals corrections, herein we report for the first time the energetically and thermodynamically favorable homolytic dissociative adsorption behavior of water over magnesia (001) films deposited on metal substrate. The water adsorption on pr…
The design and production of novel 2-dimensional materials has seen great progress in the last decade, prompting further exploration of the chemistry of such materials. Doping and hydrogenating graphene is an experimentally realised method of changing its surface chemistry, but there is still a great deal to be understood on how doping impacts on the adsorption of molecules. Developing this understanding is key to unlocking the potential applications of these materials. High throughput screening methods can provide particularly effective ways to explore vast chemical compositions of materials.…
The formation of highly reactive oxygen species (ROS) on metal oxide surfaces have attracted considerable interest due to their diverse applications. In this work, we have performed densi-ty-functional theory calculations to investigate the co-adsorption of oxygen and water on ul-trathin MgO(100) films deposited on Mo(100) substrate. We reveal that the molecular oxygen can be stepwise decomposed completely with the assistance of water. Consequently, a series of highly ROS including superoxide, hydroperoxide, hydroxyl and single oxygen adatom are formed on Mo(100) supported MgO(100) thinfilms. …
The formation of molecules in and on amorphous solid water (ASW) as it occurs in interstellar space releases appreciable amounts of energy that need to be dissipated to the environment. Here, energy transfer between CO$_2$ formed within and on the surface of amorphous solid water (ASW) and the surrounding water is studied. Following CO($^1 Σ^+$) + O($^1$D) recombination the average translational and internal energy of the water molecules increases on the $\sim 10$ ps time scale by 15 % to 20 % depending on whether the reaction takes place on the surface or in an internal cavity of ASW. Due to …
First-principles density-functional theory and supercell models are employed to calculate the adsorption of water molecules on the Cu(100) surface. In agreement with the experimental observations, the calculations show that a H2O molecule prefers to bond at a one-fold on-top (T1) surface site with a tilted geometry. At low temperatures, rotational diffusion of the molecular axis of the water molecules around the surface normal is predicted to occur at much higher rates than lateral diffusion of the molecules. In addition, the calculated binding energy of an adsorbed water molecule on the surfa…
This work reports an innovative humidity driven actuation concept based on Bangham effect using simple nanoporous sol-gel silica thin films as humidity responsive materials. Bilayer shaped actuators, consisting on a humidity-sensitive active nanostructured silica film deposited on a polymeric substrate (Kapton) were demonstrated as an original mean to convert water molecule adsorption and capillary condensation in useable mechanical work. Reversible silica surface energy modifications by water adsorption and the energy produced by the rigid silica film contraction, induced by water capillary c…
Understanding the formation of molecules under conditions relevant to interstellar chemistry is fundamental to characterize the chemical evolution of the universe. Using reactive molecular dynamics simulations with model-based or high-quality potential energy surfaces provides a means to specifically and quantitatively probe individual reaction channels at a molecular level. The formation of CO$_2$ from collision of CO($^1 Σ$) and O($^1$D) is characterized on amorphous solid water (ASW) under conditions typical in cold molecular clouds. Recombination takes place on the sub-nanosecond time scal…
Water adsorption on a model silicate surface: wollastonite (100)
Institute of Applied Physics, TU Wien（维也纳工业大学应用物理研究所）；Central European Institute of Technology, Brno University of Technology（布尔诺理工大学中欧理工学院）；Department of Lithospheric Research, Universität Wien（维也纳大学岩石圈研究系）
Using the King & Wells method, we present experimental data on the dependence of the sticking of molecular hydrogen and deuterium on the beam temperature onto non- porous amorphous solid water (ASW) ice surfaces of interstellar interest. A statistical model that explains the isotopic effect and the beam temperature behavior of our data is proposed. This model gives an understanding of the discrepancy between all known experimental results on the sticking of molecular hydrogen. Moreover it is able to fit the theoretical results of V. Buch et al. [Astrophys. J. (1991), 379, 647] on atomic hydrog…
The recombination dynamics of $^3$P oxygen atoms on cold amorphous solid water to form triplet and singlet molecular oxygen (O$_2$) is followed under conditions representative for cold clouds. It is found that both, formation of ground state ($X ^3 Σ_{g}^{-}$) O$_2$ and molecular oxygen in the two lowest singlet states ($a ^1Δ_g$ and $b ^1Σ_g^+$) is possible and that the species can stabilize. The relative proportions of the species is approximately 1:1:1. These results also agree qualitatively with a kinetic model based on simplified wavepacket simulations. As the chemical reactivity of tripl…
Near-surface Defects Break Symmetry in Water Adsorption on CeO$_{2-x}$(111)
National Institute for Materials Science (NIMS)（物质材料研究机构）；Departamento de Física Teórica de la Materia Condensada, Universidad Autónoma de Madrid（马德里自治大学凝聚态理论物理系）；Instituto de Catálisis y Petroleoquímica (CSIC)（催化与石油化工研究所（西班牙国家研究委员会））；Condensed Matter Physics Center (IFIMAC), Universidad Autónoma de Madrid（马德里自治大学凝聚态物理中心）；Graduate School of Engineering Science, Osaka University（大阪大学工学研究科）
Reducing carbon dioxide emissions has become a must in society, being crucial to find alternatives to supply the energy demand. Adsorption-based cooling and heating technologies are receiving attention for thermal energy storage applications. In this paper, we study the adsorption of polar working fluids in hydrophobic and hydrophilic zeolites by means of experimental quasi-equilibrated temperature-programmed desorption and adsorption combined with Monte Carlo simulations. We measured and computed water and methanol adsorption isobars in high-silica HS-FAU, NaY, and NaX zeolites. We use the ex…
One believed path to Interstellar Complexes Organic Molecules (iCOMs) formation inside the Interstellar Medium (ISM) is through chemical recombination at the surface of amorphous solid water (ASW) mantle covering the silicate-based core of the interstellar grains. The study of these iCOMs formation and their binding energy to the ASW, using computational chemistry, depends strongly on the ASW models used, as different models may exhibit sites with different adsorbing features. ASW extended models are rare in the literature because large sizes require very large computational resources when qua…
Core-excitation of water ice releases many different molecules and ions in the gas phase. Studying these desorbed species and the underlying mechanisms can provide useful information on the effects of X-ray irradiation in ice. We report a detailed study of the X-ray induced desorption of a number of neutral, cationic and anionic species from amorphous solid water. We discuss the desorption mechanisms, and the relative contributions of Auger and secondary electrons (X-ray induced Electron Stimulated Desorption) and initial excitation (\rev{direct desorption}) as well as the role of photochemist…
Density Functional Theory calculations are used to investigate the role of substrate-induced cooperative effects on the adsorption of water on a partially oxidized transition metal surface, O(2x2)/Ru(0001). Focussing particularly on the dimer configuration, we analyze the different contributions to its binding energy. A significant reinforcement of the intermolecular hydrogen-bond (H-bond), also supported by the observed frequency shifts of the vibration modes, is attributed to the polarization of the donor molecule when bonded to the Ru atoms in the substrate. This result is further confirmed…
The UV photoreactivity of polycyclic aromatic hydrocarbons (PAHs) in porous amorphous solid water has long been known to form both oxygenated photoproducts and photofragments. The aim of this study was to examine the influence of the ice structure upon reactivity under soft UV irradiation conditions. Mixtures of PAHs with amorphous solid water (porous and compact) and crystalline (cubic and hexagonal) ices were prepared in a high vacuum chamber and irradiated using a mercury lamp for up to 2.5 hours. The results show that the production of oxygenated PAHs is efficient only in amorphous water i…
Interstellar and cometary ices play an important role in the formation of planetary systems around young stars. Their main constituent is amorphous solid water (ASW). Although ASW is widely studied, vibrational energy dissipation and structural changes due to vibrational excitation are less well understood. The hydrogen-bonding network is likely a crucial component in this. Here we present experimental results on hydrogen-bonding changes in ASW induced by the intense, nearly monochromatic mid-IR free-electron laser (FEL) radiation of the FELIX-2 beamline at the HFML-FELIX facility at the Radbo…
Molecular adsorption on surfaces plays a central role in catalysis, corrosion, desalination, and many other processes of relevance to industry and the natural world. Few adsorption systems are more ubiquitous or of more widespread importance than those involving water and carbon, and for a molecular level understanding of such interfaces water monomer adsorption on graphene is a fundamental and representative system. This system is particularly interesting as it calls for an accurate treatment of electron correlation effects, as well as posing a practical challenge to experiments. Here, we emp…
Vacuum-UV (VUV) photodesorption from water-rich ice mantles coating interstellar grains is known to play an important role in the gas-to-ice ratio in star- and planet-forming regions. Quantitative photodesorption yields from water ice are crucial for astrochemical models. We aim to provide the first quantitative photon-energy dependent photodesorption yields from water ice in the VUV. This information is important to understand the photodesorption mechanisms and to account for the variation of the yields under interstellar irradiation conditions. Experiments have been performed on the DESIRS b…
Amorphous solid water (ASW) is abundantly present in the interstellar medium, where it forms a mantle on interstellar dust particles and it is the precursor for cometary ices. In space, ASW acts as substrate for interstellar surface chemistry leading to complex molecules and it is postulated to play a critical role in proton-transfer reactions. Although ASW is widely studied and is generally well characterized by different techniques, energetically-induced structural changes, such as ion, electron and photon irradiation, in these materials are less well understood. Selective pumping of specifi…
In the quest to understand the formation of the building blocks of life, amorphous solid water (ASW) is one of the most widely studied molecular systems. Indeed, ASW is ubiquitous in the cold interstellar medium (ISM), where ASW-coated dust grains provide a catalytic surface for solid phase chemistry, and is believed to be present in the Earth's atmosphere at high altitudes. It has been shown that the ice surface adsorbs small molecules such as CO, N$_2$, or CH$_4$, most likely at OH groups dangling from the surface. Our study presents completely new insights concerning the behaviour of ASW up…
The contact of water with semiconductors typically changes its surface electronic structure by oxidation or corrosion processes. A detailed knowledge - or even control of - the surface structure is highly desirable, as it impacts the performance of opto-electronic devices from gas-sensing to energy conversion applications. It is also a prerequisite for density functional theory-based modelling of the electronic structure in contact with an electrolyte. The P-rich GaP(100) surface is extraordinary with respect to its contact with gas-phase water, as it undergoes a surface reordering, but does n…
The striking anomalies in physical properties of supercooled water that were discovered in the 1960-70s, remain incompletely understood and so provide both a source of controversy amongst theoreticians, and a stimulus to experimentalists and simulators to find new ways of penetrating the "crystallization curtain" that effectively shields the problem from solution. Recently a new door on the problem was opened by showing that, in ideal solutions, made using ionic liquid solutes, water anomalies are not destroyed as earlier found for common salt and most molecular solutes, but instead are enhanc…
The adsorption of anions from aqueous solution on the air/water interface controls important heterogeneous chemistry in the atmosphere and is thought to have similar physics to anion adsorption at hydrophobic interfaces more generally. While much theoretical and experimental work over the last 20 years has made clear that the adsorption of large, polarizable anions is thermodynamically favorable, determining the role of polarizability in adsorption has proven surprisingly challenging. Simple physical models make clear that nonpolarizable anions will not adsorb, but trends in adsorption are dif…
The reduction reaction of turning Cr(VI) into Cr(III) by appropriate oxidants together with nanoscale catalysts in contaminated soil and water received significant amount of attention for its environmental benefits. Single-atom catalysts (SACs), as an emergent new type of catalysts, show great potential for simultaneous adsorption for the Cr(VI) removal. In this work, we investigated the efficiency of 3d transitional metal (from Sc to Zn) SACs in adsorption for the Cr(VI) removal via a theoretical approach. DFT calculations were used to measure the structural and energetic of Cr(VI) (H2CrO4 an…
Nitrate is an important pollutant in drinking water worldwide, and a number of methods exist for the removal of nitrate from water including ion exchange and reverse osmosis. However, these approaches suffer from a variety of disadvantages including requirements for supply and disposal of brine used for regeneration in ion exchange and low water recovery ratio for reverse osmosis. Here, we demonstrate the use of high surface area activated carbon electrodes functionalized with moieties having high affinity for adsorption of nitrate from aqueous solution, such as those used in ion exchange. Ads…
Using surface-tension measurements, we study the brush-limited adsorption dynamics of a range of amphiphilic polymers, PAAH-$α$-$\textrm{C}_n$ composed of a poly(acrylic acid) backbone, PAAH, grafted with a fraction $α$ of alkyl moieties, containing either $n=8$ or $n=12$ carbon atoms, at pH conditions where the PAAH backbone is not charged. At short times, the surface tension decreases more sharply as the degree of grafting increases while at long times, the adsorption dynamics becomes logarithmic in time and is slower as the degree of grafting increases. This logarithmic behavior at long tim…
Amorphous solid water (ASW) is one of the most widely studied solid phase systems. A better understanding of the nature of inter- and intramolecular forces in ASW is, however, still required to correctly interpret the catalytic role of ASW in the formation and preservation of molecular species in environments such as the icy surfaces of Solar System objects, on interstellar icy dust grains and potentially even in the upper layers of the Earth's atmosphere. In this work, we have systematically exposed porous ASW (pASW) to mid-infrared radiation generated by a free-electron laser at the HFML-FEL…
Protons at the water/vapor interface are relevant for atmospheric and environmental processes, yet to characterize their surface affinity on the quantitative level is still challenging. Here we utilize phase-sensitive sum-frequency vibrational spectroscopy to quantify the surface density of protons (or their hydronium form) at the intrinsic water/vapor interface, through inspecting the surface-field-induced alignment of water molecules in the electrical double layer of ions. With hydrogen halides in water, the surface adsorption of protons is found to be independent of specific proton-halide a…
For the first time, an ab initio molecular dynamics simulation was performed to describe the C$_3$S/water interface. The simulation shows that oxides with favorable environment are protonated at first, creating very stable hydroxide groups. Proton transfers occur between water and silicates, and between water and hydroxides formed upon water dissociation on the surface. The typical lifetime of these events is on the same timescale than interconversion between Eigen and Zundel ions in bulk water. At the very early stage of the hydration encompassed by our simulation, silanol groups are very uns…
Clay minerals are ubiquitous in nature, and the manner in which they interact with their surroundings has important industrial and environmental implications. Consequently, a molecular-level understanding of the adsorption of molecules on clay surfaces is crucial. In this regard computer simulations play an important role, yet the accuracy of widely used empirical force fields (FF) and density functional theory (DFT) exchange-correlation functionals is often unclear in adsorption systems dominated by weak interactions. Herein we present results from quantum Monte Carlo (QMC) for water and meth…
The diffusion of molecules on interstellar grain surfaces is one of the most important driving forces for the molecular complexity in the interstellar medium. Due to the lack of laboratory measurements, astrochemical modeling of grain surface processes usually assumes a constant ratio between the diffusion energy barrier and the desorption energy. This over-simplification inevitably causes large uncertainty in model predictions. We present a new measurement of the diffusion of CO$_2$ molecules on the surface of non-porous amorphous solid water (np-ASW), an analog of the ice mantle that covers …
Water adsorption within zeolites of the Linde Type A (LTA) structure plays an important role in processes of water removal from solvents. For this purpose, knowing in which adsorption sites water is preferably found is of interest. In this paper, the distribution of water within LTA is investigated in several aluminum-substituted frameworks ranging from a Si:Al ratio of 1 (maximum substitution, framework is hydrophilic) to a Si:Al ratio of 191 (almost pure siliceous framework, it is hydrophobic). The counterion is sodium. In the hydrophobic framework, water enters the large α-cages, whereas in…
