Rubidium transitions as wavelength reference for astronomical Doppler spectrographs
Dmytro Rogozin, Tobias Feger, Christian Schwab, Yulia V. Gurevich, Gert Raskin, David W. Coutts, Julian Stuermer, Andreas Seifahrt, Thorsten Fuehrer, Thomas Leg… 展开作者
Dmytro Rogozin, Tobias Feger, Christian Schwab, Yulia V. Gurevich, Gert Raskin, David W. Coutts, Julian Stuermer, Andreas Seifahrt, Thorsten Fuehrer, Thomas Legero, Hans van Winckel, Sam Halverson, Andreas Quirrenbach
Precise wavelength calibration is a critical issue for high-resolution spectroscopic observations. The ideal calibration source should be able to provide a very stable and dense grid of evenly distributed spectral lines of constant intensity. A new method which satisfies all mentioned conditions has been developed by our group. The approach is to actively measure the exact position of a single spectral line of a Fabry-Perot etalon with very high precision with a wavelength-tuneable laser and compare it to an extremely stable wavelength standard. The ideal choice of standard is the D2 absorption line of Rubidium, which has been used as an optical frequency standard for decades. With this technique, the problem of stable wavelength calibration of spectrographs becomes a problem of how reliably we can measure and anchor one etalon line to the Rb transition. In this work we present our self-built module for Rb saturated absorption spectroscopy and discuss its stability.
We present a method of frequency stabilizing a broadband etalon that can serve as a high-precision wavelength calibrator for an Echelle spectrograph. Using a laser to probe the Doppler-free saturated absorption of the rubidium D2 line, we stabilize one etalon transmission peak directly to the rubidium frequency. The rubidium transition is an established frequency standard and has been used to lock lasers to fractional stabilities of $<10^{-12}$, a level of accuracy far exceeding the demands of radial velocity (RV) searches for exoplanets. We describe a simple setup designed specifically for us…
We present a new solution for the dispersive element in astronomical spectrographs, which in many cases can provide an upgrade path to enhance the spectral resolution of existing moderate-resolution reflection-grating spectrographs. We demonstrate that in the case of LRIS-R at the Keck 1 Telescope a spectral resolution of 18,000 can be achieved with reasonable throughput under good seeing conditions.
Focal ratio degradation (FRD), the increase of light's focal ratio between the input into an optical fiber and the output, is important to characterize for astronomical spectrographs due to its effects on throughput and the point spread function. However, while FRD is a function of many fiber properties such as stresses, microbending, and surface imperfections, angular misalignments between the incoming light and the face of the fiber also affect the light profile and complicate this measurement. A compact experimental setup and a model separating FRD from angular misalignment was applied to a…
Laser frequency combs (LFCs) are well on their way to becoming the next-generation calibration sources for precision astronomical spectroscopy. This development is considered key in the hunt for low-mass rocky exoplanets around solar-type stars whose discovery with the radial-velocity method requires cm/s Doppler precision. In order to prove such precise calibration with an LFC, it must be compared to another calibrator of at least the same precision. Being the best available spectrograph calibrator, this means comparing it to a second - fully independent - LFC. This test had long been pending…
The Gemini Remote Access to CFHT ESPaDONS Spectrograph has achieved first light of its experimental phase in May 2014. It successfully collected light from the Gemini North telescope and sent it through two 270 m optical fibers to the the ESPaDOnS spectrograph at CFHT to deliver high-resolution spectroscopy across the optical region. The fibers gave an average focal ratio degradation of 14% on sky, and a maximum transmittance of 85% at 800nm. GRACES achieved delivering spectra with a resolution power of R = 40,000 and R = 66,000 between 400 and 1,000 nm. It has a ~8% throughput and is sensitiv…
Astronomical instrumentation is most of the time faced with challenging requirements in terms of sensitivity, stability, complexity, etc., and therefore leads to high performance developments that at first sight appear to be suitable only for the specific design application at the telescope. However, their usefulness in other disciplines and for other applications is not excluded. The ERA2 facility is a lab demonstrator, based on a high-performance astronomical spectrograph, which is intended to explore the innovation potential of fiber-coupled multi-channel spectroscopy for spatially resolved…
In astronomical spectroscopy, optical fibres are abundantly used for multiplexing and decoupling the spectrograph from the telescope to provide stability in a controlled environment. However, fibres are less than perfect optical components and introduce complex effects that diminish the overall throughput, efficiency, and stability of the instrument. We present a novel numerical field propagation model that emulates the effects of modal noise, scrambling, and focal ratio degradation with a rigorous treatment of wave optics. We demonstrate that the simulation of the near- and far-field output o…
We demonstrate for the first time an efficient, photonic-based astronomical spectrograph on the 8-m Subaru Telescope. An extreme adaptive optics system is combined with pupil apodiziation optics to efficiently inject light directly into a single-mode fiber, which feeds a compact cross-dispersed spectrograph based on array waveguide grating technology. The instrument currently offers a throughput of 5% from sky-to-detector which we outline could easily be upgraded to ~13% (assuming a coupling efficiency of 50%). The isolated spectrograph throughput from the single-mode fiber to detector was 42%…
We present results from the first on-sky demonstration of a prototype astronomical integrated photonic spectrograph (IPS) using the Anglo-Australian Telescope near-infrared imaging spectrometer (IRIS2) at Siding Spring Observatory to observe atmospheric molecular OH emission lines. We have succeeded in detecting upwards of 27 lines, and demonstrated the practicality of the IPS device for astronomy. Furthermore, we present a laboratory characterization of the device, which is a modified version of a commercial arrayed-waveguide grating multiplexer. We measure the spectral resolution full-width-…
Characterization and on-sky testing of photonic, AWG-based astronomical spectrographs
Université Côte d’Azur, Observatoire de la Côte d’Azur, CNRS, Laboratoire Lagrange（蔚蓝海岸大学，蔚蓝海岸天文台，法国国家科学研究中心，拉格朗日实验室）；California Institute of Technology（加州理工学院）；University of California, Los Angeles (UCLA)（加州大学洛杉矶分校）；Université Grenoble Alpes, CNRS, IPAG（格勒诺布尔阿尔卑斯大学，法国国家科学研究中心，天体物理学与行星学研究所）；Aix Marseille Université, CNRS, LAM (Laboratoire d’Astrophysique de Marseille) UMR 7326（艾克斯-马赛大学，法国国家科学研究中心，马赛天体物理实验室）
Validation and extension of the PAWS Zemax model as a first step in the development of a Compact Arrayed Waveguide Stacked Multi-Object Spectrograph (CAWSMOS)
Leibniz Institut für Astrophysik, Potsdam, Germany（波茨坦莱布尼茨天体物理研究所）；Leibniz Institute for High Performance Microelectronics, Frankfurt (Oder), Germany（法兰克福（奥得河）莱布尼茨高性能微电子研究所）；University of Potsdam, Potsdam, Germany（波茨坦大学）
We report on the construction and testing of a vacuum-gap Fabry-Pérot etalon calibrator for high precision radial velocity spectrographs. Our etalon is traced against a rubidium frequency standard to provide a cost effective, yet ultra-precise wavelength reference. We describe here a turn-key system working at 500 nm to 900 nm, ready to be installed at any current and next generation radial velocity spectrograph that requires calibration over a wide spectral bandpass. Where appropriate, we have used off-the-shelf, commercial components with demonstrated long-term performance to accelerate the …
Raman scattering enables unforeseen uses for the laser guide-star system of the Very Large Telescope. Here, we present the observation of one up-link sodium laser beam acquired with the ESPRESSO spectrograph at a resolution $λ/Δλ\sim 140'000$. In 900s on-source, we detect the pure rotational Raman lines of $^{16}$O$_2$, $^{14}$N$_2$, and $^{14}$N$^{15}$N (tentatively) up to rotational quantum numbers $J$ of 27, 24, and 9, respectively. We detect the $^{16}$O$_2$ fine-structure lines induced by the interaction of the electronic spin \textbf{S} and end-over-end rotational angular momentum \textb…
With the aim of utilizing arrayed waveguide gratings for multi-object spectroscopy in the field of astronomy, we outline several ways in which standard telecommunications grade chips should be modified. In particular, by removing the parabolic-horn taper or multimode interference coupler, and injecting with an optical fiber directly, the resolving power was increased threefold from 2400 \pm 200 (spectral resolution of 0.63 \pm 0.2 nm) to 7000 \pm 700 (0.22 \pm 0.02 nm) while attaining a throughput of 77 \pm 5%. More importantly, the removal of the taper enabled simultaneous off-axis injection …
Echelle spectrographs with their high resolution plays important role in determination of characteristics of stellar lines. Wide field of applications is focused mainly on the measurements of precise radial velocity applied in exoplanetary research. In my diploma thesis I am concentrated on the calibration of the Ondřejov Echelle Spectrograph at Astronomical Institute of the Czech Academy of Sciences. My role was to investigate the wide field of opportunities how to process the data with the best possible results. Successful reduction was performed by both Image Reduction and Analysis Facility…
The Xinglong 2.16-m reflector is the first 2-meter class astronomical telescope in China. It was jointly designed and built by the Nanjing Astronomical Instruments Factory (NAIF), Beijing Astronomical Observatory (now National Astronomical Observatories, Chinese Academy of Sciences, NAOC) and Institute of Automation, Chinese Academy of Sciences in 1989. It is Ritchey-Chrétien (R-C) reflector on an English equatorial mount and the effective aperture is 2.16 meters. It had been the largest optical telescope in China for $\sim18$ years until the Guoshoujing Telescope (also called Large Sky Area M…
In this paper, we are going to introduce the Kottamia Astronomical Observatory, KAO, to the astronomical community. The current status of the telescope together with the available instrumentations is described. An upgrade stage including a new optical system and a computer controlling of both the telescope and dome are achieved. The specifications of a set of CCD cameras for direct imaging and spectroscopy are given. A grating spectrograph is recently gifted to KAO from Okayama Astrophysical Observatory, OAO, of the National Astronomical Observatories in Japan. This spectrograph is successfull…
CubeSats are routinely used for low-cost photometry from space. Space-borne spectroscopy, however, is still the exclusive domain of much larger platforms. Key astrophysical questions in e.g. stellar physics and exoplanet research require uninterrupted spectral monitoring from space over weeks or months. Such monitoring of individual sources is unfortunately not affordable with these large platforms. With CUBESPEC we plan to offer the astronomical community a low-cost CubeSat solution for near-UV/optical/near-IR spectroscopy that enables this type of observations. CUBESPEC is a generic spectrog…
Spectroscopy is one of the most important tools that an astronomer has for studying the universe. This chapter begins by discussing the basics, including the different types of optical spectrographs, with extension to the ultraviolet and the near-infrared. Emphasis is given to the fundamentals of how spectrographs are used, and the trade-offs involved in designing an observational experiment. It then covers observing and reduction techniques, noting that some of the standard practices of flat-fielding often actually degrade the quality of the data rather than improve it. Although the focus is …
Astrophotonics is the application of photonic technologies to channel, manipulate, and disperse light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. Utilizing photonic advantage for astronomical spectroscopy is a promising approach to miniaturizing the next generation of spectrometers for large telescopes. It can be primarily attained by leveraging the two-dimensional nature of photonic structures on a chip or a set of fibers, thus reducing the size of spectroscopic instrumentation to a few centimeters and the weight to a few h…
Thorium hollow cathode lamps (HCLs) are used as frequency calibrators for many high resolution astronomical spectrographs, some of which aim for Doppler precision at the 1 m/s level. We aim to determine the most suitable combination of elements (Th or U, Ar or Ne) for wavelength calibration of astronomical spectrographs, to characterize differences between similar HCLs, and to provide a new U line-list. We record high resolution spectra of different HCLs using a Fourier transform spectrograph: (i) U-Ne, U-Ar, Th-Ne, and Th-Ar lamps in the spectral range from 500 to 1000 nm and U-Ne and U-Ar fr…
A photonic spectrograph can be much smaller than a conventional spectrograph with the same resolving power. Individual devices can be integrated with optical fibres to improve the multiplex gain in astronomical spectroscopy. Although experimental devices have been tested, the parameter space where integrated photonic spectrographs give a significant advantage over traditional methods has not been defined. This paper gives an overview of the theory with verification by direct simulation using Fresnel propagation and quantifies the benefit for representative spectroscopic capabilities. We thereb…
The Prime Focus Spectrograph (PFS) is a fiber fed multi-object spectrometer for the Subaru Telescope that will conduct a variety of targeted surveys for studies of dark energy, galaxy evolution, and galactic archaeology. The key to the instrument is a high density array of fiber positioners placed at the prime focus of the Subaru Telescope. The system, nicknamed "Cobra", will be capable of rapidly reconfiguring the array of 2394 optical fibers to the image positions of astronomical targets in the focal plane with high accuracy. The system uses 2394 individual "SCARA robot" mechanisms that are …
Precise astronomical spectroscopic analyses routinely assume that individual pixels in charge-coupled devices (CCDs) have uniform sensitivity to photons. Intra-pixel sensitivity (IPS) variations may already cause small systematic errors in, for example, studies of extra-solar planets via stellar radial velocities and cosmological variability in fundamental constants via quasar spectroscopy, but future experiments requiring velocity precisions approaching ~1 cm/s will be more strongly affected. Laser frequency combs have been shown to provide highly precise wavelength calibration for astronomic…
Differential atmospheric dispersion is a wavelength-dependent effect introduced by the atmosphere. It is one of the instrumental errors that can affect the position of the target as perceived on the sky and its flux distribution. This effect will affect the results of astronomical observations if not corrected by an atmospheric dispersion corrector (ADC). In high-resolution spectrographs, in order to reach a radial velocity (RV) precision of 10 cm/s, an ADC is expected to return residuals at only a few tens of milli-arcseconds (mas). In fact, current state-of-the-art spectrographs conservative…
The space ultraviolet (UV) is a critical astronomical observing window, where a multitude of atomic, ionic, and molecular signatures provide crucial insight into planetary, interstellar, stellar, intergalactic, and extragalactic objects. The next generation of large space telescopes require highly sensitive, moderate-to-high resolution UV spectrograph. However, sensitive observations in the UV are difficult, as UV optical performance and imaging efficiencies have lagged behind counterparts in the visible and infrared regimes. This has historically resulted in simple, low-bounce instruments to …
CUBES is the Cassegrain U-Band Efficient Spectrograph, a high-efficiency instrument operating in the UV spectral range between 300nm and 400nm with a resolution not less than 20000. CUBES is to be installed at a Cassegrain focus of the Very Large Telescope of the European Southern Observatory. The paper briefly reviews various types of devices used as dispersing elements in astronomical spectrographs to achieve high resolution, before identifying binary transmission gratings produced by microlithography as the best candidate technology for the CUBES instrument. We describe the lithographic fab…
The ultraviolet (UV) window has been largely unexplored through balloons for astronomy. We discuss here the development of a compact near-UV spectrograph with fiber optics input for balloon ights. It is a modified Czerny-Turner system built using off-the-shelf components. The system is portable and scalable to different telescopes. The use of re ecting optics reduces the transmission loss in the UV. It employs an image-intensified CMOS sensor, operating in photon counting mode, as the detector of choice. A lightweight pointing system developed for stable pointing to observe astronomical source…
ASTRONIRCAM is a cryogenic-cooled slit spectrograph for the spectral range 1-2.5 mkm installed at the Nasmyth focus of the 2.5-meter telescope of the Caucasian observatory of Sternberg Astronomical Institute of Lomonosov Moscow State University. The instrument is equipped with the HAWAII-2RG 2048x2048 HgCdTe array. Grisms are used as dispersive elements. In the photometric mode ASTRONIRCAM allows for extended astronomical object imaging in the field of view of 4.6x4.6 arc minutes with the 0.269 arcsec/pixel scale in standard photometric bands J, H, K and Ks as well as in narrow-band filters CH…
Technological advancement has led to improvement in the design capabilities of astronomical spectrographs, allowing for high precision spectroscopy, thereby expanding the realms of observational astronomy. High-resolution spectrographs use Echelle grating that operates in higher orders, giving more detailed spectra. Often, curvature and tilted lines are observed in the spectra, arising due to the design trade-offs of the respective spectrographs. Removal of these artifacts can help avoid wrong flux calculation and line centroid position misinterpretation, which can aid in a better prediction o…
Accurate wavelength calibration is an important factor for any measurement with high resolution spectrographs. Stellar spectrum comprises of discrete absorption or emission lines whose position is precisely determined by calibrating the spectrograph using known reference lines generated from laboratory sources. For the spectrograph to measure small variations in Doppler shift, the wavelength calibration must be sufficiently stable during observation time. Instrument instability, mainly due to environmental factors like temperature and pressure variations, limitations of traditional calibration…
We present a modelling scheme that predicts the centroids of spectral line features for a high resolution Echelle spectrograph to a high accuracy. Towards this, a computing scheme is used, whereby any astronomical spectrograph can be modelled and controlled without recourse to a ray tracing program. The computations are based on paraxial ray trace and exact corrections added for certain surface types and Buchdahl aberration coefficients for complex modules. The resultant chain of paraxial ray traces and corrections for all relevant components is used to calculate the location of any spectral l…
We report on the development and construction of a new fiber-fed, red-optical, high-precision radial-velocity spectrograph for one of the twin 6.5m Magellan Telescopes in Chile. MAROON-X will be optimized to find and characterize rocky planets around nearby M dwarfs with an intrinsic per measurement noise floor below 1 m/s. The instrument is based on a commercial echelle spectrograph customized for high stability and throughput. A microlens array based pupil slicer and double scrambler, as well as a rubidium-referenced etalon comb calibrator will turn this spectrograph into a high-precision ra…
Current status of the High-Resolution Multi-Object Spectrograph (MOS-HR) for the Wide-field Spectroscopic Telescope
INAF – Osservatorio Astrofisico di Arcetri（意大利国家天体物理研究所阿切特里天文台）；INAF-Merate（意大利国家天体物理研究所梅拉特分部）；CRAL, Université Claude Bernard Lyon 1（里昂第一大学克劳德·贝尔纳天体物理研究实验室）；UK Astronomy Technology Centre (UKATC/STFC), Royal Observatory Edinburgh（爱丁堡皇家天文台英国天体技术中心）
We discuss the laser frequency comb as a near infrared astronomical wavelength reference, and describe progress towards a near infrared laser frequency comb at the National Institute of Standards and Technology and at the University of Colorado where we are operating a laser frequency comb suitable for use with a high resolution H band astronomical spectrograph.
Radial velocity (RV) surveys supported by high precision wavelength references (notably ThAr lamps and I2 cells) have successfully identified hundreds of exoplanets; however, as the search for exoplanets moves to cooler, lower mass stars, the optimum wave band for observation for these objects moves into the near infrared (NIR) and new wavelength standards are required. To address this need we are following up our successful deployment of an H band(1.45-1.7μm) laser frequency comb based wavelength reference with a comb working in the Y and J bands (0.98-1.3μm). This comb will be optimized for …
We present the data reduction pipeline, MEAD, for Arizona Lenslets for Exoplanet Spectroscopy (ALES), the first thermal infrared integral field spectrograph designed for high-contrast imaging. ALES is an upgrade of LMIRCam, the $1-5\,μ$m imaging camera for the Large Binocular Telescope, capable of observing astronomical objects in the thermal infrared ($3-5\,μ$m) to produce simultaneous spatial and spectral data cubes. The pipeline is currently designed to perform $L$-band ($2.8-4.2\,μ$m) data cube reconstruction, relying on methods used extensively by current near-infrared integral field spec…
The spectral resolving power R = lambda / delta lambda is a key property of any spectrograph, but its definition is vague because the `smallest resolvable wavelength difference' delta lambda does not have a consistent definition. Often the FWHM is used, but this is not consistent when comparing the resolution of instruments with different forms of spectral line spread function. Here two methods for calculating resolving power on a consistent scale are given. The first is based on the principle that two spectral lines are just resolved when the mutual disturbance in fitting the fluxes of the li…
The multi-object spectrograph (MOS) has been the benchmark for the current generation of astronomical spectrographs, valued for its ability to acquire the spectra of hundreds of objects simultaneously. In the last two decades, the digital micromirror device (DMD) has shown potential in becoming the central component of the MOS, being used as a programmable slit array. We have designed a seeing-limited DMD-based MOS covering a spectral range of 0.4 to 0.7 $μ$m, with a field of view (FOV) of $10.5^\prime \times 13.98^\prime$ and a spectral resolution of $R\sim1000$. This DMD-MOS employs all-sphe…
We investigate a new scheme for astronomical spectrograph calibration using the laser frequency comb at the Solar Vacuum Tower Telescope on Tenerife. Our concept is based upon a single-mode fiber channel, that simultaneously feeds the spectrograph with comb light and sunlight. This yields nearly perfect spatial mode matching between the two sources. In combination with the absolute calibration provided by the frequency comb, this method enables extremely robust and accurate spectroscopic measurements. The performance of this scheme is compared to a sequence of alternating comb and sunlight, an…
Photonic spectrographs offer a highly miniaturized, flexible, and stable on-chip solution for astronomical spectroscopy and can be used for various science cases such as determining the atmospheric composition of exoplanets to understand their habitability, formation, and evolution. Arrayed Waveguide Gratings (AWGs) have shown the best promise to be used as an astrophotonic spectrograph. We developed a publically-available tool to conduct a preliminary examination of the capability of the AWGs in spectrally resolving exoplanet atmospheres. We derived the Line-Spread-Function (LSF) as a functio…
We present the Spectroscopic Classification of Astronomical Transients (SCAT) survey, which is dedicated to spectrophotometric observations of transient objects such as supernovae and tidal disruption events. SCAT uses the SuperNova Integral-Field Spectrograph (SNIFS) on the University of Hawai'i 2.2-meter (UH2.2m) telescope. SNIFS was designed specifically for accurate transient spectrophotometry, including absolute flux calibration and host-galaxy removal. We describe the data reduction and calibration pipeline including spectral extraction, telluric correction, atmospheric characterization,…
Integrated photonic spectrographs offer an avenue to extreme miniaturization of astronomical instruments, which would greatly benefit extremely large telescopes and future space missions. These devices first require optimization for astronomical applications, which includes design, fabrication and field-testing. Given the high costs of photonic fabrication, Multi-Project Wafer (MPW) SiN offerings, where a user purchases a portion of a wafer, provide a convenient and affordable avenue to develop this technology. In this work we study the potential of two commonly used SiN waveguide geometries b…
WINERED is a newly built high-efficiency (throughput$ > 25-30\%$) and high-resolution spectrograph customized for short NIR bands at 0.9-1.35 ${\rm μ}$m. WINERED is equipped with ambient temperature optics and a cryogenic camera using a 1.7 ${\rm μ}$m cut-off HgCdTe HAWAII-2RG array detector. WINERED has two grating modes: one with a conventional reflective echelle grating (R$\sim$28,300), which covers 0.9-1.35 $μ$m simultaneously, the other with ZnSe or ZnS immersion grating (R$\sim$100,000). We have completed the development of WINERED except for the immersion grating, and started engineerin…
We present a technique to synthesise telluric absorption and emission features both for in-situ wavelength calibration and for their removal from astronomical spectra. While the presented technique is applicable for a wide variety of optical and infrared spectra, we concentrate in this paper on selected high-resolution near-infrared spectra obtained with the CRIRES spectrograph to demonstrate its performance and limitation. We find that synthetic spectra reproduce telluric absorption features to about 2%, even close to saturated line cores. Thus, synthetic telluric spectra could be used to rep…
The Transient Double-beam Spectrograph (TDS) is designed for optical low-resolution observations of non-stationary and extragalactic sources with the 2.5-m telescope of Caucasus Mountain Observatory of the Sternberg Astronomical Institute. It operates simultaneously in a short-wavelength (360--577 nm, reciprocal dispersion 1.21 A/pixel, resolving power R=1300 with a 1 arcsec slit) and long-wavelength (567--746 nm, 0.87 A/pixel, R=2500) channels. The light is split by a dichroic mirror with a 50% transmission at 574 nm. In the "blue" channel, the automatic replacement of the grating by a grism …
This article reviews the two major recent developments that significantly improved cosmological measurements of fundamental constants derived from high resolution quasar spectroscopy. The first one is the deployment of astronomical Laser Frequency Combs on high resolution spectrographs and the second one is the development of spectral analysis tools based on Artificial Intelligence methods. The former all but eliminated the previously dominant source of instrumental uncertainty whereas the latter established optimal methods for measuring the fine structure constant ($α$) in quasar absorption s…
Wavelength calibration is a routine and critical part of any spectral work-flow, but many astronomers still resort to matching detected peaks and emission lines by hand. We present RASCAL (RANSAC Assisted Spectral CALibration), a python library for automated wavelength calibration of astronomical spectrographs. RASCAL implements recent state-of-the-art methods for wavelength calibration and requires minimal input from a user. In this paper we discuss the implementation of the library and apply it to real-world calibration spectra.
We propose a dual cavity Fabry-Perot interferometer as a wavelength calibrator and a stability tracking device for astronomical spectrograph. The FPI consists of two adjoining cavities engraved on a low expansion monoblock spacer. A low-finesse astro-cavity is intended for generating a uniform grid of reference lines to calibrate the spectrograph and a high-finesse lock-cavity is meant for tracking the stability of the reference lines using optical frequency standards. The differential length changes in two cavities due to temperature and vibration perturbations are quantitatively analyzed usi…
Ground-based telescopes equipped with adaptive-optics (AO) systems and specialized science cameras are now capable of directly detecting extrasolar planets. We present the expected scientific capabilities of CHARIS, the Coronagraphic High Angular Resolution Imaging Spectrograph, which is being built for the Subaru 8.2 m telescope of the National Astronomical Observatory of Japan. CHARIS will be implemented behind the new extreme adaptive optics system at Subaru, SCExAO, and the existing 188-actuator system AO188. CHARIS will offer three observing modes over near-infrared wavelengths from 0.9 t…
