Chemical sensing with atomically-thin metals templated by a two-dimensional insulator
Kyung Ho Kim, Hans He, Marius Rodner, Rositsa Yakimova, Karin Larsson, Marten Piantek, David Serrate, Alexei Zakharov, Sergey Kubatkin, Jens Eriksson, Samuel Lara-Avila
Boosting the sensitivity of solid-state gas sensors by incorporating nanostructured materials as the active sensing element can be complicated by interfacial effects. Interfaces at nanoparticles, grains, or contacts may result in non-linear current-voltage response, high electrical resistance, and ultimately, electric noise that limits the sensor read-out. Here we report the possibility to prepare nominally one atom thin, electrically continuous metals, by straightforward physical vapor deposition on the carbon zero-layer grown epitaxially on silicon carbide. With platinum as the metal, its electrical conductivity is strongly modulated when interacting with chemical analytes, due to charges being transferred to/from Pt. This, together with the scalability of the material, allows us to microfabricate chemiresistor devices for electrical read-out of chemical species with sub part-per-billion detection limits. The two-dimensional system formed by atomically-thin metals open up a route for resilient and high sensitivity chemical detection, and could be the path for designing new heterogeneous catalysts with superior activity and selectivity.
Based on first-principles calculations and symmetry analysis, we predict atomically thin ($1-N$ layers) 2H group-VIB TMDs $MX_2$ ($M$ = Mo, W; $X$ = S, Se, Te) are large-gap higher-order topological crystalline insulators protected by $C_3$ rotation symmetry. We explicitly demonstrate the nontrivial topological indices and existence of the hallmark corner states with quantized fractional charge for these familiar TMDs with large bulk optical band gaps ($1.64-1.95$ eV for the monolayers), which would facilitate the experimental detection by STM. We find that the well-defined corner states exist…
The metal-insulator transition (MIT) is one of the remarkable electrical transport properties of atomically thin molybdenum disulphide (MoS2). Although the theory of electron-electron interactions has been used in modeling the MIT phenomena in MoS2, the underlying mechanism and detailed MIT process still remain largely unexplored. Here, we demonstrate that the vertical metal-insulator-semiconductor (MIS) heterostructures built from atomically thin MoS2 (monolayers and multilayers) are ideal capacitor structures for probing the electron states in MoS2. The vertical configuration of MIS heterost…
The interplay between band topology and magnetic order plays a key role in quantum states of matter. MnBi2Te4, a van der Waals magnet, has recently emerged as an exciting platform for exploring Chern insulator physics. Its layered antiferromagnetic order was predicted to enable even-odd layer-number dependent topological states, supported by promising edge transport measurements. Furthermore, it becomes a Chern insulator when all spins are aligned by an applied magnetic field. However, the evolution of the bulk electronic structure as the magnetic state is continuously tuned and its dependence…
Atomically thin topological materials are attracting growing attention for their potential to radically transform classical and quantum electronic device concepts. Amongst them is the quantum spin Hall (QSH) insulator - a two-dimensional state of matter that arises from an interplay of topological band inversion and strong spin-orbit coupling, with large tunable bulk band gaps up to 800meV and gapless, one-dimensional edge states. Reviewing recent advances in materials science and engineering alongside theoretical description, this article surveys the QSH materials library with focus on their …
Atomically-abrupt interfaces in transition metal oxide (TMO) heterostructures could host a variety of exotic condensed matter phases that may not be found in the bulk materials at equilibrium. A critical step in the development of such atomically-sharp interfaces is the deposition of atomically-smooth TMO thin films. Optimized deposition conditions exist for the growth of perovskite oxides. However, the deposition of rutile oxides, such as VO$_2$, with atomic-layer precision has been challenging. In this work, we used pulsed laser deposition (PLD) to grow atomically-smooth VO$_2$ thin films on…
Atomically sharp epitaxial growth of Bi2Se3 films is achieved on Si (111) substrate with MBE (Molecular Beam Epitaxy). Two-step growth process is found to be a key to achieve interfacial-layer-free epitaxial Bi2Se3 films on Si substrates. With a single-step high temperature growth, second phase clusters are formed at an early stage. On the other hand, with low temperature growth, the film tends to be disordered even in the absence of a second phase. With a low temperature initial growth followed by a high temperature growth, second-phase-free atomically sharp interface is obtained between Bi2S…
Optical spectroscopy of ultimately thin materials has significantly enhanced our understanding of collective excitations in low-dimensional semiconductors. This is particularly reflected by the rich physics of excitons in atomically thin crystals which uniquely arises from the interplay of strong Coulomb correlation, spin-orbit coupling (SOC), and lattice geometry. Here we extend the field by reporting the observation of room temperature excitons in a material of non-trivial global topology. We study the fundamental optical excitation spectrum of a single layer of bismuth atoms epitaxially gro…
Millimeter-Scale, Atomically Controlled 2D Topological Insulators Revealed by Multimodal Spectroscopy
The University of Chicago（芝加哥大学）；Gachon university（嘉泉大学）；Weizmann Institute of Science（魏茨曼科学研究所）；Northwestern University（西北大学）；University of Illinois Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；University of Florida（佛罗里达大学）；Pennsylvania State University（宾夕法尼亚州立大学）；University of Maryland, College Park（马里兰大学帕克分校）
The recent discovery of magnetism in atomically thin layers of van der Waals crystals has created great opportunities for exploring light-matter interactions and magneto-optical phenomena in the two-dimensional limit. Optical and magneto-optical experiments have provided insights into these topics, revealing strong magnetic circular dichroism and giant Kerr signals in atomically thin ferromagnetic insulators. However, the nature of the giant magneto-optical responses and their microscopic mechanism remain unclear. Here, by performing first-principles GW and Bethe-Salpeter equation calculations…
MnBi2Te4 is a van der Waals topological insulator with intrinsic intralayer ferromagnetic exchange and A-type antiferromagnetic interlayer coupling. Theoretically, it belongs to a class of structurally centrosymmetric crystals whose layered antiferromagnetic order breaks inversion symmetry for even layer numbers, making optical second harmonic generation (SHG) an ideal probe of the coupling between the crystal and magnetic structures. Here, we perform magnetic field and temperature-dependent SHG measurements on MnBi2Te4 flakes ranging from bulk to monolayer thickness. We find that the dominant…
We have studied the elastic deformation of freely suspended atomically thin sheets of muscovite mica, a widely used electrical insulator in its bulk form. Using an atomic force microscope, we carried out bending test experiments to determine the Young's modulus and the initial pre-tension of mica nanosheets with thicknesses ranging from 14 layers down to just one bilayer. We found that their Young's modulus is high (190 GPa), in agreement with the bulk value, which indicates that the exfoliation procedure employed to fabricate these nanolayers does not introduce a noticeable amount of defects.…
Two-dimensional (2D) layered materials-based field-effect transistors (FETs) are promising for ultimate scaled electron device applications because of the improved electrostatics to atomically thin body thickness. However, compared with the typical thickness of ~5-nm for Si-on-insulator (SOI), the advantage of the ultimate thickness limit of monolayer for the device performance has not been fully proved yet, especially for the on-state at the accumulation region. Here, we present much stronger quantum-mechanical effect at the accumulation region based on the C-V analysis for top-gate MoS2 FETs…
Atomically thin boron nitride (BN) is an important two-dimensional (2D) nanomaterial, with many properties distinct from graphene. In this feature article, these unique properties and associated applications often not possible from graphene are outlined. The article starts with characterization and identification of atomically thin BN. It is followed by demonstrating their strong oxidation resistance at high temperatures and applications in protecting metals from oxidation and corrosion. As flat insulators, BN nanosheets are ideal dielectric substrates for surface enhanced Raman spectroscopy (…
Exfoliated chromium triiodide (CrI$_3$) is a layered van der Waals (vdW) magnetic insulator that consists of ferromagnetic layers coupled through antiferromagnetic interlayer exchange. The resulting permutations of magnetic configurations combined with the underlying crystal symmetry produces tunable magneto-optical phenomena that is unique to the two-dimensional (2D) limit. Here, we report the direct observation of 2D magnons through magneto-Raman spectroscopy with optical selection rules that are strictly determined by the honeycomb lattice and magnetic states of atomically thin CrI$_3$. In …
Metal-Insulator-Metal tunnel junctions (MIMTJ) are common throughout the microelectronics industry. The industry standard AlOx tunnel barrier, formed through oxygen diffusion into an Al wetting layer, is plagued by internal defects and pinholes which prevent the realization of atomically-thin barriers demanded for enhanced quantum coherence. In this work, we employed in situ scanning tunneling spectroscopy (STS) along with molecular dynamics simulations to understand and control the growth of atomically thin Al2O3 tunnel barriers using atomic layer deposition (ALD). We found that a carefully t…
Two dimensional (2D) layered materials have recently gained renewed interest due to their exotic electronic properties along with high specific surface area. The prospects of exploiting these properties in sensing, catalysis, energy storage, protective coatings and electrochromism have witnessed a paradigm shift towards the exploration of these sophisticated 2D materials. The exemplary performance of graphene (1) which is among the first of these elemental 2D materials have initiated a runaway effect in the pursuit of studying alternative 2D materials. Even though graphene has tunable exotic e…
Evolution of topological phases in atomically thin WTe2 films
Tsung-Dao Lee Institute, School of Physics and Astronomy, Shanghai Jiao Tong University（上海交通大学物理与天文学院淞江研究院）；Institute of Atomic and Molecular Sciences, Academia Sinica（中央研究院原子与分子科学研究所）
Materials with high thermal conductivities (k) is valuable to solve the challenge of waste heat dissipation in highly integrated and miniaturized modern devices. Herein, we report the first synthesis of atomically thin isotopically pure hexagonal boron nitride (BN) and its one of the highest k among all semiconductors and electric insulators. Single atomic layer (1L) BN enriched with 11B has a k up to 1009 W/mK at room temperature. We find that the isotope engineering mainly suppresses the out-of-plane optical (ZO) phonon scatterings in BN, which subsequently reduces acoustic-optical scatterin…
Motivated by experiments on atomically smooth layers of LaTiO$_3$, a Mott insulator, sandwiched between layers of SrTiO$_3$, a band insulator, a simple model for such heterostructures is studied using quasi one-dimensional lattices and the Lanczos method. Taking both the local and long-range Coulomb interactions into account, and computing the layer dependent local density of states, a metallic state was found at the interface whose extent strongly depends on the dielectric constant of the material. We also observed that the antiferromagnetic correlations in the bulk Mott phase persist into th…
We present a study of the synthesis of epitaxial V$_2$O$_3$ films on $c$-plane Al$_2$O$_3$ substrates by reactive dc-magnetron sputtering. The results reveal a temperature window, at substantially lower values than previously reported, wherein epitaxial films can be obtained when deposited on [0001] oriented surfaces. The films display a metal-insulator transition with a change in resistance of up to four orders of magnitude, strongly dependent on the O$_2$ partial pressure during deposition. While the electronic properties of the films show sensitivity to the amount of O$_2$ present during de…
Nucleation processes of mixed-phase states are an intrinsic characteristic of first-order phase transitions, typically related to local symmetry breaking. Direct observation of emerging mixed-phase regions in materials showing a first-order metal-insulator transition (MIT) offers unique opportunities to uncover their driving mechanism. Using photoemission electron microscopy, we image the nanoscale formation and growth of insulating domains across the temperature-driven MIT in NdNiO3 epitaxial thin films. Heteroepitaxy is found to strongly determine the nanoscale nature of the phase transition…
We report the heteroepitaxy of single crystal thin films of Bi2Se3 on the (111)B surface of GaAs by molecular beam epitaxy. We find that Bi2Se3 grows highly c-axis oriented, with an atomically sharp interface with the GaAs substrate. By optimizing the growth of a very thin GaAs buffer layer before growing the Bi2Se3, we demonstrate the growth of thin films with atomically flat terraces over hundreds of nanometers. Initial time-resolved Kerr rotation measurements herald opportunities for probing coherent spin dynamics at the interface between a candidate topological insulator and a large class …
Quantum spin Hall (QSH) insulators have gapless topological edge states inside the bulk band gap, which can serve as dissipationless spin current channels protected by the time-reversal symmetry. The major challenge currently is to find suitable materials for this topological state. Here, we predict a new large-gap QSH insulator with bulk direct band gap of $\sim$0.18 eV, in single-layer Bi$_{4}$Br$_{4}$, which could be exfoliated from its three-dimensional bulk material due to the weakly-bonded layered structure. The band gap of single-layer Bi$_{4}$Br$_{4}$ is tunable via strain engineering,…
Two-dimensional (2D) topological crystalline insulators (TCIs) were recently predicted in thin films of the SnTe class of IV-VI semiconductors, which can host metallic edge states protected by mirror symmetry. As thickness decreases, quantum confinement effect will increase and surpass the inverted gap below a critical thickness, turning TCIs into normal insulators. Surprisingly, based on first-principles calculations, here we demonstrate that (001) monolayers of rocksalt IV-VI semiconductors XY (X=Ge, Sn, Pb and Y= S, Se, Te) are 2D TCIs with the fundamental band gap as large as 260 meV in mo…
Controlling phase transitions in transition metal oxides remains a central feature of both technological and fundamental scientific relevance. A well-known example is the metal-insulator transition which has been shown to be highly controllable while a less well understood aspect of this phenomenon is the length scale over which the phases can be established. To gain further insight into this issue, we have atomically engineered an artificially phase separated system through fabricating epitaxial superlattices consisting of SmNiO$_{3}$ and NdNiO$_{3}$, two materials undergoing a metal-to-insul…
Two-dimensional quantum spin Hall (QSH) insulators with reasonably wide band gaps are imperative for the development of various innovative technologies. Through systematic density functional calculations and tight-binding simulations, we found that stanene on α-alumina surface may possess a sizeable topologically nontrivial band gap (~0.25 eV) at the Γ point. Furthermore, stanene is atomically bonded to but electronically decoupled from the substrate, providing high structural stability and isolated QSH states to a large extent. The underlying physical mechanism is rather general, and this fin…
The metastable layered compound MnBi2Te4 is the first experimentally realized intrinsic antiferromagnetic topological insulator, predicted to host the quantum anomalous Hall effect at high temperatures upon exfoliation to atomically thin layers. While its magnetic ordering and topological properties have generated intensive interest, the mechanism behind its metastability and the ideal crystal synthesis conditions have remained elusive. Here, using a combined first-principles-based approach that considers lattice, charge, and spin degrees of freedom, we investigate the metastability of MnBi2Te…
Interface-Induced Superconductivity in Magnetic Topological Insulator-Iron Chalcogenide Heterostructures
The Pennsylvania State University（宾夕法尼亚州立大学）；Rutgers University（罗格斯大学）；University of Washington（华盛顿大学）；Chinese Academy of Sciences（中国科学院）；Materials Research Institute, The Pennsylvania State University（宾夕法尼亚州立大学材料研究所）；National High Magnetic Field Laboratory（国家高磁场实验室）；Paul Scherrer Institute（保罗谢尔研究所）；National Institute of Standards and Technology（美国国家标准与技术研究院）
Metallic oxide SrVO3 represents a prototype system for the study of the mechanism behind thickness-induced metal-to-insulator transition (MIT) or crossover in thin films due to its simple cubic symmetry with one electron in the 3d state in the bulk. Here we report a deviation of chemical composition and distortion of lattice structure existing in the initial 3 unit cells of SrVO3 films grown on SrTiO3 (001) from its bulk form, which shows a direct correlation to the thickness-dependent MIT. In-situ photoemission and scanning tunneling spectroscopy indicate a MIT at the critical thickness of ~3…
Atomically-thin two-dimensional (2D) layered transition metal dichalcogenides (TMDs) have been extensively studied in recent years because of their appealing electrical and optical properties. Here, we report on the fabrication of ReS2 field-effect transistors via the encapsulation of ReS2 nanosheets in a high-\k{appa} Al2O3 dielectric environment. Low-temperature transport measurements allowed us to observe a direct metal-to-insulator transition originating from strong electron-electron interactions. Remarkably, the photodetectors based on ReS2 exhibit gate-tunable photoresponsivity up to 16.…
Interfaces between dissimilar correlated oxides can offer devices with versatile functionalities. In that respect, manipulating and measuring novel physical properties of oxide heterointerfaces are highly desired. Yet, despite extensive studies, obtaining direct information on their momentum-resolved electronic structure remains a great challenge. This is because most correlated interfacial phenomena appear within a few atomic layers from the interface, thus limiting the application of available experimental probes. Here, we utilize atomic-scale epitaxy and photoemission spectroscopy to demons…
In typical topological insulator (TI) systems the TI is bordered by a non-TI insulator, and the surrounding conventional insulators, including vacuum, are not generally treated as part of the TI system. Here, we implement the first material system where the roles are reversed, and the TSS form around the non-TI (instead of the TI) layers. This is realized by growing a layer of the tunable non-TI $(Bi_{1-x}In_{x})_{2}Se_{3}$ in between two layers of the TI $Bi_2Se_3$ using the atomically-precise molecular beam epitaxy technique. On this tunable inverse topological platform, we systematically va…
Research on two-dimensional materials has expanded over the past two decades to become a central theme in condensed matter research today. Significant advances have been made in the synthesis and subsequent reassembly of these materials using mechanical methods into a vast array of hybrid structures with novel properties and ever-increasing potential applications. The key hurdles in realizing this potential are the challenges in controlling the atomic structure of these layered hybrid materials and the difficulties in harnessing their unique functionality with existing semiconductor nanofabric…
The observation of electronic phase separation textures in vanadium dioxide (VO2), a prototypical electron-correlated oxide, has recently added new perspectives on the long standing debate about its metal-insulator transition and its applications. Yet, the lack of atomically-resolved information on phases accompanying such complex patterns still hinders a comprehensive understanding of the transition and its implementation in practical devices. In this work, atomic resolution imaging and spectroscopy unveils the existence of ferroelastic tweed structures on ~5 nm length scales, well below the …
Two-dimensional materials offer opportunities for unravelling unprecedented ordered states at single layer limit. Among such ordered states, Mott phase is rarely explored. Here, we report the Mott phase in van der Waals chromium (II) iodide (CrI2) films. High quality CrI2 films with atomically flat surface and macro size are grown on graphitized 6H-SiC(0001) substrate by molecular beam epitaxy. By in situ low temperature scanning tunneling microscopy and spectroscopy (STM/STS), we reveal that the film has a band gap as large as ~3.2 eV, which is nearly thickness independent. Density functional…
Atomically thin transitional metal ditellurides like WTe2 and MoTe2 have triggered tremendous research interests because of their intrinsic nontrivial band structure. They are also predicted to be 2D topological insulators and type-II Weyl semimetals. However, most of the studies on ditelluride atomic layers so far rely on the low-yield and time-consuming mechanical exfoliation method. Direct synthesis of large-scale monolayer ditellurides has not yet been achieved. Here, using the chemical vapor deposition (CVD) method, we demonstrate controlled synthesis of high-quality and atom-thin telluri…
The modification of electronic band structures and the subsequent tuning of electrical, optical, and thermal material properties is a central theme in the engineering and fundamental understanding of solid-state systems. In this scenario, atomically thin materials offer an appealing platform because they are extremely susceptible to electric and magnetic gating, as well as to interlayer hybridization in stacked configurations, providing the means to customize and actively modulate their response functions. Here, we introduce a radically different approach to material engineering relying on the…
Atomically thin 2D materials span the common components of electronic circuits as metals, semi-conductors, and insulators, and can manifest correlated phases such as superconductivity, charge density waves, and magnetism. An ongoing challenge in the field is to incorporate these 2D materials into multi-layer hetero-structures with robust electrical contacts while preventing disorder and degradation. In particular, preserving and studying air-sensitive 2D materials has presented a significant challenge since they readily oxidize under atmospheric conditions. We report a new technique for contac…
High quality thin films of topological insulators (TI) such as Bi2Se3 have been successfully synthesized by molecular beam epitaxy (MBE). Although the surface of MBE films can be protected by capping with inert materials such as amorphous Se, restoring an atomically clean pristine surface after decapping has never been demonstrated, which prevents in-depth investigations of the intrinsic properties of TI thin films with ex-situ tools. Using high resolution scanning tunneling microscopy/spectroscopy (STM/STS), we demonstrate a simple and highly reproducible Se decapping method that allows recov…
Hexagonal boron nitride (h-BN) is the only known material aside from graphite with a structure composed of simple, stable, non-corrugated atomically thin layers. While historically used as lubricant in powder form, h-BN layers have become particularly attractive as an ultimately thin insulator. Practically all emerging electronic and photonic device concepts rely on h-BN exfoliated from small bulk crystallites, which limits device dimensions and process scalability. Here, we address this integration challenge for mono-layer h-BN via a chemical vapour deposition process that enables crystal siz…
Two-dimensional (2D) van der Waals (vdW) materials show a range of profound physical properties that can be tailored through their incorporation in heterostructures and manipulated with external forces. The recent discovery of long-range ferromagnetic order down to atomic layers provides an additional degree of freedom in engineering 2D materials and their heterostructure devices for spintronics, valleytronics and magnetic tunnel junction switches. Here, using direct imaging by cryo-Lorentz transmission electron microscopy we show that topologically nontrivial magnetic-spin states, skyrmionic …
Two-dimensional (2D) materials are among the most promising candidates for next-generation electronics due to their atomic thinness, allowing for flexible transparent electronics and ultimate length scaling. Thus far, atomically-thin p-n junctions, metal-semiconductor contacts, and metal-insulator barriers have been demonstrated. While 2D materials achieve the thinnest possible devices, precise nanoscale control over the lateral dimensions is also necessary. Here, we report the direct synthesis of sub-nanometer-wide 1D MoS2 channels embedded within WSe2 monolayers, using a dislocation-catalyze…
Two-dimensional (2D) materials are highly promising for tunnel field effect transistors (TFETs) with low subthreshold swing and high drive current because the shorter tunnel distance and strong gate controllability can be expected from the van der Waals gap distance and the atomically sharp heterointerface formed independently of lattice matching. However, the common problem for 2D-2D TFETs is the lack of highly doped 2D materials with the high process stability as the sources. In this study, we have found that p+-WSe2 doped by charge transfer from a WOx surface oxide layer can be stabilized b…
