Atomically-thin two-dimensional (2D) layered transition metal dichalcogenides (TMDs) have been extensively studied in recent years because of their appealing electrical and optical properties. Here, we report on the fabrication of ReS2 field-effect transistors via the encapsulation of ReS2 nanosheets in a high-\k{appa} Al2O3 dielectric environment. Low-temperature transport measurements allowed us to observe a direct metal-to-insulator transition originating from strong electron-electron interactions. Remarkably, the photodetectors based on ReS2 exhibit gate-tunable photoresponsivity up to 16.14 A/W and external quantum efficiency reaching 3,168 %, showing a competitive device performance to those reported in graphene, MoSe2, GaS and GaSe-based photodetectors. Our study unambiguously distinguishes ReS2 as a new candidate for future applications in electronics and optoelectronics.
The metal contacts on 2D black phosphorus field-effect transistor and photodetectors are studied. The metal work functions can significantly impact the Schottky barrier at the metal-semiconductor contact in black phosphorus devices. Higher metal work functions lead to larger output hole currents in p-type transistors, while ambipolar characteristics can be observed with lower work function metals. Photodetectors with record high photoresponsivity (223 mA/W) are demonstrated on black phosphorus through contact-engineering.
Photodetectors based on two dimensional materials have attracted growing interest. However, the sensitivity is still unsatisfactory even under high gate voltage. Here we demonstrate a MoS2 photodetector with a poly(vinylidene fluoride-trifluoroethylene) ferroelectric layer in place of the oxide layer in a traditional field effect transistor. The dark current of the photodetector is strongly suppressed by ferroelectric polarization. A high detectivity 2.21012 Jones) and photoresponsitivity (2570 A W) detector has been achieved under ZERO gate bias at a wavelength of 635 nm. Most strikingly, the…
Two-dimensional (2D) materials, such as molybdenum disulfide (MoS2), have been shown to exhibit excellent electrical and optical properties. The semiconducting nature of MoS2 allows it to overcome the shortcomings of zero-bandgap graphene, while still sharing many of graphene's advantages for electronic and optoelectronic applications. Discrete electronic and optoelectronic components, such as field-effect transistors, sensors and photodetectors made from few-layer MoS2 show promising performance as potential substitute of Si in conventional electronics and of organic and amorphous Si semicond…
A graphene bilayer phototransistor (GBL-PT) is proposed and analyzed. The GBL-PT under consideration has the structure of a field-effect transistor with a GBL as the channel and the back and top gates. The positive bias of the back gate results in the formation of conducting source and drain sections in the channel, while the negatively biased top gate provides the potential barrier which is controlled by the charge of the photogenerated holes. The features of the GBL-PT operation are associated with the variations of both the potential distribution and the energy gap in different sections of …
The unique property of bilayer graphene to show a band gap tunable by external electrical fields enables a variety of different device concepts with novel functionalities for electronic, optoelectronic and sensor applications. So far the operation of bilayer graphene based field effect transistors requires two individual gates to vary the channel's conductance and to create a band gap. In this paper we report on a method to increase the on/off ratio in single gated bilayer graphene field effect transistors by adsorbate doping. The adsorbate dopants on the upper side of the graphene establish a…
Monolayer transition metal dichalcogenides (TMD) have numerous potential applications in ultrathin electronics and photonics. The exposure of TMD based devices to light generates photo-carriers resulting in an enhanced conductivity, which can be effectively used, e.g., in photodetectors. If the photo-enhanced conductivity persists after removal of the irradiation, the effect is known as persistent photoconductivity (PPC). Here we show that ultraviolet light (wavelength = 365 nm) exposure induces an extremely long-living giant PPC (GPPC) in monolayer MoS2 (ML-MoS2) field-effect transistors (FET…
Transition metal dichalcogenide (TMDC) monolayers have attracted much attention due to their strong light absorption and excellent electronic properties. These advantages make this type of two-dimensional crystal a promising one for optoelectronic device applications. In the case of photoelectric conversion devices such as photodetectors and photovoltaic cells, p-n junctions are one of the most important devices. Here, we demonstrate photodetection with WSe2 monolayer films. We prepare the electrolyte-gated ambipolar transistors and electrostatic p-n junctions are formed by the electrolyte-gat…
Semiconductor nanowire field-effect transistors represent a promising platform for the development of room-temperature (RT) terahertz (THz) frequency light detectors due to the strong nonlinearity of their transfer characteristics and their remarkable combination of low noise-equivalent powers (< 1 nW/Hz$^{1/2}$) and high responsivities (> 100 V/W). Nano-engineering a NW photodetector combining high sensitivity with high speed (sub-ns) in the THz regime at RT is highly desirable for many frontier applications in quantum optics and nanophotonics, but this requires a clear understanding of the o…
Fundamental physical properties limiting the performance of spin field effect transistors are compared to those of ordinary (charge-based) field effect transistors. Instead of raising and lowering a barrier to current flow these spin transistors use static spin-selective barriers and gate control of spin relaxation. The different origins of transistor action lead to distinct size dependences of the power dissipation in these transistors and permit sufficiently small spin-based transistors to surpass the performance of charge-based transistors at room temperature or above. This includes lower t…
Due to the excellent electrical transport properties and optoelectronic performance, thin indium selenide (InSe) has recently attracted attention in the field of 2D semiconducting materials. However, the mechanism behind the photocurrent generation in thin InSe photodetectors remains elusive. Here, we present a set of experiments aimed at explaining the strong scattering in the photoresponsivity values reported in the literature for thin InSe photodetectors. By performing optoelectronic measurements on thin InSe-based photodetectors operated under different environmental conditions we find tha…
We investigate the time-resolved photocurrent response of CdSe quantum dot (QD) thin films sensitized with zinc beta-tetraaminophthalocyanine (Zn4APc) on three different substrates, namely silicon with 230 nm SiO2 dielectric, glass as well as polyimide. While Si/SiO2(230 nm) is not suitable for any transient photocurrent characterization due to an interfering photocurrent response of the buried silicon, we find that polyimide substrates invoke the larger optical bandwidth with 85 kHz vs. 67 kHz for the same quantum dot thin film on glass. Upon evaluation of the transient photocurrent, we find …
Integrating ferroelectric negative capacitance (NC) into the field-effect transistor (FET) promises to break fundamental limits of power dissipation known as Boltzmann tyranny. However, realizing the stable static negative capacitance in the non-transient non-hysteretic regime remains a daunting task. The problem stems from the lack of understanding of how the fundamental origin of the NC due to the emergence of the domain state can be put in use for implementing the NC FET. Here we put forth an ingenious design for the ferroelectric domain-based field-effect transistor with the stable reversi…
With the motivation of improving the performance and reliability of aggressively scaled nano-patterned graphene field-effect transistors, we present the first systematic experimental study on charge and current distribution in multilayer graphene field-effect transistors. We find a very particular thickness dependence for Ion, Ioff, and the Ion/Ioff ratio, and propose a resistor network model including screening and interlayer coupling to explain the experimental findings. In particular, our model does not invoke modification of the linear energy-band structure of graphene for the multilayer c…
We develop theoretical arguments that demonstrate the possibility of metallic field-effect transistors (METFET's) in one-dimensional systems and particularly in armchair carbon nanotubes. A very inhomogeneous electric field, such as the field of a tunnelling tip, can penetrate the relatively weakly screened nanotubes and open an energy gap. As a consequence, an energy barrier forms that impedes electron flow and thus permits transistor action. This type of metallic field effect is advantageous because of the high conductance of the metallic tubes in the ON--state.
We utilize an organic polymer buffer layer between graphene and conventional gate dielectrics in top-gated graphene transistors. Unlike other insulators, this dielectric stack does not significantly degrade carrier mobility, allowing for high field-effect mobilities to be retained in top-gate operation. This is demonstrated in both two-point and four-point analysis, and in the high-frequency operation of a graphene transistor. Temperature dependence of the carrier mobility suggests that phonons are the dominant scatterers in these devices.
Fabrication of graphene field effect transistor is described which uses an intrinsic graphene on the surface of as deposited hydrogenated amorphous carbon films. Ambipolar characteristic has been demonstrated typical for graphene devices, which changes to unipolar characteristic if the surface graphene was etched in oxygen plasma. Because amorphous carbon films can be growth easily, with unlimited dimensions and no transfer of graphene is necessary, this can open new perspective for graphene electronics.
Ultrathin (~3 quintuple layer) field-effect transistors (FETs) of topological insulator Bi2Se3 are prepared by mechanical exfoliation on 300nm SiO2/Si susbtrates. Temperature- and gate-voltage dependent conductance measurements show that ultrathin Bi2Se3 FETs are n-type, and have a clear OFF state at negative gate voltage, with activated temperature-dependent conductance and energy barriers up to 250 meV.
We have fabricated carbon nanotube (CN) field-effect transistors with multiple, individually addressable gate segments. The devices exhibit markedly different transistor characteristics when switched using gate segments controlling the device interior versus those near the source and drain. We ascribe this difference to a change from Schottky barrier modulation at the contacts to bulk switching. We also find that the current through the bulk portion is independent of gate length for any gate voltage, offering direct evidence for ballistic transport in semiconducting CNs over at least a few hun…
The influence of edge vacancies on the working ability of the planar graphene tunnel field-effect transistor (TFET) is studied at various concentrations and distributions (normal, uniform, periodic) of defects. All calculations are performed by using the Green's function method and the tight-binding approximation. It is shown that the transistor performance depends critically on two important factors associated with the defects: the destruction of the edge-localized electronic states and the emergence of subpeaks near the Fermi level. The supportable operation conditions of the TFET are found …
We theoretically study the intraband transition spectrum of single electron transistors (SETs) composed of individual self-assembled quantum dots. The polarization of SETs is obtained by using the nonequilibrium Green's function technique and the Anderson model with three energy levels. Owing to nonradiative coupling between two excited states through the continuum of electrodes, the Fano interference effect significantly influences the peak position and intensity of infrared wavelength single-photon spectrum.
We investigate the time-resolved photoelectric response of WSe$_2$ crystals on common glass and flexible polyimide substrates to determine the effect of the dielectric environment on the speed of the photodetectors. We show that varying the substrate material can alter the speed-limiting mechanism: while the detectors on polyimide are RC limited, those on glass are limited by slower excitonic diffusion processes. We attribute this to a shortening of the depletion layer at the metal electrode/WSe2 interface caused by the higher dielectric screening of glass compared to polyimide. The photodetec…
In this work, we compare the photodetector performance of single defect-free undoped and n-in GaN nanowires (NWs). In vacuum, undoped NWs present a responsivity increment, nonlinearities and persistent photoconductivity effects (~ 100 s). Their unpinned Fermi level at the m-plane NW sidewalls enhances the surface states role in the photodetection dynamics. Air adsorbed oxygen accelerates the carrier dynamics at the price of reducing the photoresponse. In contrast, in n-i-n NWs, the Fermi level pinning at the contact regions limits the photoinduced sweep of the surface band bending, and hence r…
Nanowire photodetectors are investigated because of their compatibility with flexible electronics, or for the implementation of on-chip optical interconnects. Such devices are characterized by ultrahigh photocurrent gain, but their photoresponse scales sublinearly with the optical power. Here, we present a study of single-nanowire photodetectors displaying a linear response to ultraviolet illumination. Their structure consists of a GaN nanowire incorporating an AlN/GaN/AlN heterostructure, which generates an internal electric field. The activity of the heterostructure is confirmed by the recti…
We report an investigation on the observation of ultrahigh photoresponse (photogain, G_Pc>106) in single nanowire photodetectors of diameter < 100 nm. The investigation which is a combination of experimental observations and a theoretical analysis of the ultrahigh optical response of semiconductor nanowires, has been carried out with emphasis on Ge nanowires. Semiconductor nanowire photodetectors show a signature of photogating where G_Pc rolls-off with increasing illumination intensity. We show that surface band bending due to depleted surface layers in nanowires induces a strong radial field…
Spin-orbit torque is a promising mechanism for writing magnetic memories, while field-effect transistors are the gold-standard device for logic operation. The spin-orbit torque field effect transistor (SOTFET) is a proposed device that couples a spin-orbit-torque-controlled ferromagnet to a semiconducting transistor channel via the transduction in a magnetoelectric multiferroic. This allows the SOTFET to operate as both a memory and a logic device, but its realization depends on the choice of appropriate materials. In this report, we discuss and parametrize the types of materials that can lead…
The possible existence of short-channel effects in oxide field-effect transistors is investigated by exploring field-effect transistors with various gate lengths fabricated from LaAlO$_3$-SrTiO$_3$ heterostructures. The studies reveal the existence of channel-length modulation and drain-induced barrier lowering for gate lengths below 1 μm, with a characteristic behavior comparable to semiconducting devices. With the fabrication of field-effect transistors with gate lengths as small as 60 nm the results demonstrate the possibility to fabricate by electron-beam lithography functional devices bas…
Two-dimensional (2D) transition metal dichalcogenides (TMDs) based photodetectors have shown great potential for the next generation optoelectronics. However, most of the reported MoS2 photodetectors function under the photogating effect originated from the charge-trap mechanism, which is difficult for quantitative control. Such devices generally suffer from a poor compromise between response speed and responsivity (R) and large dark current. Here, a dual-gated (DG) MoS2 phototransistor operating based on the interface coupling effect (ICE) is demonstrated. By simultaneously applying a negativ…
Starting from graphene, 2D layered materials family has been recently set up more than 100 different materials with variety of different class of materials such as semiconductors, metals, semimetals, superconductors. Among these materials, 2D semiconductors have found especial importance in the state of the art device applications compared to that of the current conventional devices such as (which material based for example Si based) field effect transistors (FETs) and photodetectors during the last two decades. This high potential in solid state devices is mostly revealed by the transition me…
The use of SrTiO$_3$ dielectrics as high-permittivity insulator in organic thin film field effect transistors (FET) is evaluated. Field-effect transistors with sputtered SrTiO$_3$ and copper-phthalocyanine (CuPc) as semiconducting layer were fabricated. The device preparation was performed in-situ in an ultra high vacuum chamber system. The dielectric in the transistors had a permittivity of up to 200 which led to low driving voltages of 3 V. The field effect transistors were p-type and reached mobilities of about $μ= 1.5\times 10^{-3}$ cm$^2$/Vs and an on/off ratio of $10^3$. These properties…
A model based on optical phonon scattering is developed to explain peculiarities in the current drive, transconductance, and high speed behavior of short gate length GaN transistors. The model is able to resolve these peculiarities, and provides a simple way to explain transistor behavior in any semiconductor material system in which electron-optical phonon scattering is strong.
In this paper, two dimensional modulation of the potential in sexithiophene (T6) / N,N-bis(n-octyl)-dicyanoperylenediimide (PDI-8CN2) heterojunction field effect transistors due to the specific microstructure at the interface is used to explain the negative transconductance effect (NTC) experienced in sexithiophene (T6) / N,N-bis(n-octyl)-dicyanoperylenediimide (PDI-8CN2) heterojunction field effect transistors. The NTC effect has been experienced in tunnel devices, such as the tunnel diode, the resonant tunneling field effect transistors (RT-FETs), resonant tunneling double barrier devices. I…
Graphene field-effect transistors with Co contacts as source and drain electrodes show anomalous distorted transfer characteristics. The anomaly appears only in short-channel devices (shorter than approximately 3 micrometers) and originates from a contact-induced effect. Band alteration of a graphene channel by the contacts is discussed as a possible mechanism for the anomalous characteristics observed.
We report on organic field-effect transistors with unprecedented resistance against gate bias stress. The single crystal and thin-film transistors employ the organic gate dielectric Cytop(TM). This fluoropolymer is highly water repellent and shows a remarkable electrical breakdown strength. The single crystal transistors are consistently of very high electrical quality: near zero onset, very steep subthreshold swing (average: 1.3 nF V/(dec cm2)) and negligible current hysteresis. Furthermore, extended gate bias stress only leads to marginal changes in the transfer characteristics. It appears t…
We report on the fabrication and characterization of single crystal field-effect transistors (FETs) based on diphenylbenzo diselenophene (DPh-BDSe). These organic field-effect transistors (OFETs) function as p-channel accumulation-mode devices. At room temperature, for the best devices, the threshold voltage is less than -7V and charge carrier mobility is nearly gate bias independent, ranging from 1cm2/Vs to 1.5 cm2/Vs depending on the source-drain bias. Mobility is increased slightly by cooling below room temperature and decreases below 280 K.
We fabricated a large number of single and bilayer graphene transistors and carried out a systematic experimental study of their low-frequency noise characteristics. A special attention was given to determining the dominant noise sources in these devices and the effect of aging on the current-voltage and noise characteristics. The analysis of the noise spectral density dependence on the area of graphene channel showed that the dominant contributions to the low-frequency electronic noise come from the graphene layer itself rather than from the contacts. Aging of graphene transistors due to expo…
Copper phthalocyanine (Cu-Pc) single crystals were grown by physical vapor transport and field effect transistors (FETs) on the surface of these crystals were prepared. These FETs function as p-channel accumulation-mode devices. Charge carrier mobilities of up to 1 cm2/Vs combined with a low field-effect threshold were obtained. These remarkable FET-characteristics, along with the highly stable chemical nature of Cu-Pc make it an attractive candidate for device applications.
An anomalous distortion is often observed in the transfer characteristics of graphene field-effect transistors. We fabricate graphene transistors with ferromagnetic metal electrodes, which reproducibly display distorted transfer characteristics, and show that the distortion is caused by metal-graphene contacts with no charge-density pinning effect. The pinning effect, where the gate voltage cannot tune the charge density of graphene at the metal electrodes, has been experimentally observed; however, a pinning-free interface is achieved with easily-oxidizable metals. The distortion should be a …
We report on the fabrication and electrical characterization of field-effect transistors at the surface of tetracene single crystals. We find that the mobility of these transistors reaches the room-temperature value of $0.4 \ cm^2/Vs$. The non-monotonous temperature dependence of the mobility, its weak gate voltage dependence, as well as the sharpness of the subthreshold slope confirm the high quality of single-crystal devices. This is due to the fabrication process that does not substantially affect the crystal quality.
The electrical and structural characteristics of 50 nm zinc oxide (ZnO) metal-semiconductor-metal (MSM) ultraviolet (UV) photodetectors subjected to proton irradiation at different temperatures are reported and compared. We irradiated the devices with 200 keV protons to a fluence of 1016 cm-2. Examination of the X-ray diffraction (XRD) rocking curves indicates a strongly preferred (100) orientation for the grains of the as-deposited film, with decreases in crystal quality for all irradiated samples. In addition, peak shifts in XRD and Raman spectra of the control sample relative to well-known …
Graphene and other two-dimensional (2D) materials have emerged as promising materials for broadband and ultrafast photodetection and optical modulation. These optoelectronic capabilities can augment complementary metal-oxide-semiconductor (CMOS) devices for high-speed and low-power optical interconnects. Here, we demonstrate an on-chip ultrafast photodetector based on a two-dimensional heterostructure consisting of high-quality graphene encapsulated in hexagonal boron nitride. Coupled to the optical mode of a silicon waveguide, this 2D heterostructure-based photodetector exhibits a maximum res…
Ultraviolet Photodetectors based on GaN and AlGaN/AlN Nanowire Ensembles: Effects of Planarization with Hydrogen Silsesquioxane and Nanowire Architecture
研究 HSQ 包封平坦化的 GaN 与 AlGaN/AlN 纳米线紫外光电探测器，揭示其钝化、应变和偏压可调光谱响应机制，并验证器件保持单纳米线级选择性且无持续光电流。
Solution processed polymers are at the core of organic electronics. Polyradicals (polymers in which each repeating unit contains an unpaired spin) are unique alternatives to their p-conjugated, semiconducting counterparts. Unique of polyradicals are tunable charge states localized at their repeating units, which enable electrically switchable charge transport regimes. Tremendous efforts were focused on polyradical memristors and batteries. Notwithstanding recent progress in doping, polyradical field-effect transistors (PR-FETs) have not been reported. Here, we show that vertical architectures,…
We propose and analyze a four-terminal metal-semiconductor device that uses hot-electron transport through thin ferromagnetic films to inject and detect a charge-coupled spin current transported through the conduction band of an arbitrary semiconductor. This provides the possibility of realizing a spin field-effect-transistor in Si, using electrostatic transit-time control in a perpendicular magnetic field, rather than Rashba effect with spin-orbit interaction.
