We produce transmission and reflection spectra of the anti-directional coupler (ADC) composed of linearly-coupled positive- and negative-refractive-index arms, with intrinsic Kerr nonlinearity. Both reflection and transmission feature two highly amplified peaks at two distinct wavelengths in a certain range of values of the gain, making it possible to design a wavelength-selective mode-amplification system. We also predict that a blend of gain and loss in suitable proportions can robustly enhance reflection spectra which are detrimentally affected by the attenuation, in addition to causing red and blue shifts owing to the Kerr effect. In particular, ADC with equal gain and loss coefficients, is considered in necessary detail.
Following the concept of $\mathcal{PT}$-symmetric couplers, we propose a linearly coupled system of nonlinear waveguides, made of positive- and negative-index materials, which carry, respectively, gain and loss. We report novel bi- and multi-stability states pertaining to transmitted and reflective intensities, which are controlled by the ratio of the gain and loss coefficients, and phase mismatch between the waveguides. These states offer transmission regimes with extremely low threshold intensities for transitions between coexisting states, and very large amplification ratio between the inpu…
Linear and nonlinear directional couplers are currently used in fiber optics communications. They may also play a role in multiphoton approaches to quantum information processing if accurate control is obtained over the phases and polarizations of the signals at the output of the coupler. With this motivation, the constants of motion of the coupler equation are used to obtain an explicit analytical solution for the nonlinear coupler.
Despite the benefits that directional coupler based parity-time symmetric systems may offer to the field of integrated optics, the realization of such couplers relies on rather strict design constraints on the waveguide parameters. Here, we investigate directional couplers built of asymmetric waveguides that do not fulfill parity-time symmetry. Nevertheless, we demonstrate that for properly designed parameters, at least one mode of such couplers shows a behavior similar to the one observed in parity-symmetric systems. We find an analytical condition relating gain and loss that enables such a b…
We demonstrate that nonlinear directional coupler with special bending of waveguide axes can be used for all-optical switching of polychromatic light with very broad spectrum covering all visible region. The bandwidth of suggested device is enhanced five times compared to conventional couplers. Our results suggest novel opportunities for creation of all-optical logical gates and switches for polychromatic light with white-light and super-continuum spectrum.
We study analytically the polarization behaviour of directional couplers composed of birefringent waveguides, showing that they can induce polarization transformations that depend on the specific input-output path considered. On the basis of this study, we propose and demonstrate experimentally, by femtosecond laser writing, directional couplers that are free from this problem and also yield a polarization independent power-splitting ratio. More in detail, we devise two different approaches to realize such devices: the first one is based on local birefringence engineering, while the second one…
Here, we demonstrate a new type of 3-dB coupler that has an ultra-broadband operational range starting from 1300 nm to 1600 nm with low fabrication sensitivity. Overall device size is 800 micron including in/out S-bend waveguides. The coupler is an asymmetric non-uniform directional coupler that consists of two tapered waveguides. One of the coupler arms is shifted by 130 micron in the propagation direction, which reduces the phase mismatch between the odd and even mode of the coupled system resulting in a better wavelength-flattened response compared to a not shifted coupler. Moreover, compar…
Flexible management of light polarization is necessary to develop the technologies of optical fiber communications. However, it is still a great challenge to manipulate optical polarization in all-fiberbased devices. Here we present a novel structural design of three-core fiber couplers to create arbitrary polarization management by embedding a vector mode segregated core within the conventional fiber couplers. We take advantages of these coupling structures to achieve polarization split, rotation, and exchange, as three essential polarization managements for fiber-guided modes. We study these…
In the context of guided optics, we derive, analytically and geometrically, a rigorous general criterion to design wavelength insensitive interferometers with mirror symmetry, which are needed for wavelength multiplexing/demultiplexing. The criterion is applied to a practical case, resulting in an interferometer that works on a band wider than 70 nm.
We examined the existence of critical wavelength in transmission-spectrum of a Directional Coupler, employing GeO 2 - doped SMF and showed that it differs significantly from that observed in SMS structures. The origin of critical wavelength is explained. The sensitivity has been observed to be maximum for the transmission maximum or minimum nearest to the critical wavelength. The existence of a wavelength below the critical wavelength called the cross-over wavelength where the spectrum again changes its nature of spectral shift has also been observed. The effect of increase of core radius and …
A new approach to design wavelength insensitive optical power splitter is presented. First coupled-mode theory is cast in operatorial form. This allows to solve the equivalent of coupled differential equations as simple limits. The operators are then represented on a generalized Poincare sphere, and the resulting graphical tool is applied to different structures, giving a clear interpretation of previous results in literature as well as hints on how to find improved solutions.
We report the ultrafast laser fabrication and mid-IR characterization (3.39 microns) of four-port evanescent field directional couplers. The couplers were fabricated in a commercial gallium lanthanum sulphide glass substrate using sub-picosecond laser pulses of 1030 nm light. Straight waveguides inscribed using optimal fabrication parameters were found to exhibit propagation losses of 0.8 dB/cm. A series of couplers were inscribed with different interaction lengths, and we demonstrate power splitting ratios of between 8% and 99% for mid-IR light with a wavelength of 3.39 microns. These results…
We design compact waveguide couplers via impedance-tunable transformation optics. By tuning impedance coefficients in the original space, two-dimensional metallic and dielectric waveguide couplers are designed with a high efficiency. Through tuning refractive index simultaneously, we find that the transformation medium inside a designed metallic waveguide coupler can be a reduced-parameter material for coupling waves between waveguides with arbitrary different cross sections and embedded media. In the design of dielectric waveguide couplers, we apply two different schemes: one is that both cor…
Topological waveguides have been extensively studied for their robust transmission properties immune to defects and their application potentials for microwave and terahertz integrated circuits. In this work, by using grounded planar valley-Hall photonic topological insulators, a high-efficiency topological directional coupler fed directly by microstrip line with configurable coupling coefficient is theoretically proposed and experimentally demonstrated. The topological directional coupler consists of two coupled topological waveguides, which can be directly integrated with microstrip circuits.…
Rapid development of Fabry-Perot quantum cascade laser frequency combs has converted them from laboratory devices to key components of next-generation fast molecular spectrometers. Recently, free-running ring quantum cascade lasers allowed generation of new frequency comb states induced by phase turbulence. In absence of efficient light outcoupling, ring quantum cascade lasers are not suited for applications as they are limited in their power output to microwatt levels. Here we demonstrate electrically pumped ring quantum cascade lasers with integrated active directional couplers. These device…
In this paper, we propose a method for the generation of higher dimensional modal entanglement through type II spontaneous parametric down conversion process using a three waveguide directional coupler in a periodically poled lithium niobate substrate. We show that by a proper design, it is possible to achieve an output state of two photons occupying three different spatial modes. The advantage of using such waveguide structure is its flexibility and the design space availability to achieve desired characteristics of the photon pairs generated in the down conversion process
In general the ubiquitous χ^{(2)} nonlinear directional coupler, where nonlinearity and evanescent coupling are intertwined, is nonintegrable. We rigorously demonstrate that matching excitation to the even or odd fundamental supermodes yields dynamical analytical solutions for any phase matching in a symmetric coupler. We analyze second harmonic generation and optical parametric amplification regimes and study the influence of fundamental fields parity and power on the operation of the device. These fundamental solutions are useful to develop applications in classical and quantum fields such a…
Large cross-section GaN waveguides are proposed as a suitable architecture to achieve integrated quantum photonic circuits. Directional couplers with this geometry have been designed with aid of the beam propagation method and fabricated using inductively coupled plasma etching. Scanning electron microscopy inspection shows high quality facets for end coupling and a well defined gap between rib pairs in the coupling region. Optical characterization at 800 nm shows single-mode operation and coupling-length-dependent splitting ratios. Two photon interference of degenerate photon pairs has been o…
We present the experimental evidence for the existence of two exciting wavelengths, termed critical and cross-over wavelength in the transmission spectrum of fiber-optic directional coupler, whose properties are conjugate to each other. The spectral shift associated with the transmission maxima/minima suddenly flip around these wavelengths and the spectrum shows largest (nil) spectral shift for the transmission maxima/minima closest to the critical ( at the cross-over) wavelength, corresponding to the same perturbation parameter. A theoretical explanation of the observed experimental behavior …
We demonstrate a spectrally broadband and effcient technique for collecting photoluminescence from a single InAs quantum dot directly into a standard single mode optical fiber. In this approach, an optical fiber taper waveguide is placed in contact with a suspended GaAs nanophotonic waveguide with embedded quantum dots, forming an effcient and broadband directional coupler with standard optical fiber input and output. Effcient photoluminescence collection over a wavelength range of tens of nanometers is demonstrated, and a maximum collection effciency of 6.05 % (corresponding single photon rat…
Silicon nitride based photonic integrated circuits offer a wavelength operation window in the near infrared down to visible light, which makes them attractive for life science applications. However, they exhibit significantly different behavior in comparison with better-established silicon on insulator counterparts due to the lower index contrast. Among the most important building blocks in photonic integrated circuits are broadband couplers with a defined coupling ratio. We present silicon nitride broadband asymmetric directional coupler designs with 50/50 and 90/10 splitting ratios with a ce…
Gears are rotating machines, meshing with each other by teeth to transmit torque. Interestingly, the rotating directions of two meshing gears are opposite, clockwise and counterclockwise. Although this opposite handedness motion has been widely investigated in machinery science, the analogue behavior of photons remains undiscovered. Here, we present a simple nanophotonic directional coupler structure which can generate two meshing gears of angular momentum (AM) of light, optical gears. Due to the abrupt phase shift effect and birefringence effect, the AM states of photons vary with the propaga…
A novel scheme for tunable optofluidic optical coupler is proposed, by using directional coupling waveguide structure and microfluidic channel with two tapers at end points. The normalized optical power at two output ports can be dynamically manipulated by controlling the refractive index of liquid mixture in microfluidic channel. The optical performance of the designed device is numerically investigated by employing the beam propagation method (BPM). The simulated results demonstrate that large dynamic range and low optical loss for both TE and TM mode can be easily achieved, and furthermore …
Photonic integrated circuits play a central role in current and future applications such as communications, sensing, ranging, and information processing. Photonic quantum computing will also likely require an integrated optics architecture for improved stability, scalability, and performance. Fault-tolerant quantum computing mandates very accurate and robust quantum gates. In this work, we demonstrate high-fidelity directional couplers for single-qubit gates in photonic integrated waveguides, utilizing a novel scheme of detuning-modulated composite segments. Specific designs for reduced sensit…
A novel class of photonic integrated circuits employs large-scale integration of combined beam splitters and waveguides loaded with phase actuators to provide complex linear processing functionalities that can be reconfigured dynamically. Here, we propose and experimentally demonstrate a thermally-actuated Dual-Drive Directional Coupler (DD-DC) design, integrated in a silicon nitride platform, functioning both as a standalone optical component providing arbitrary optical beam splitting and common phase as well as for its use in waveguide mesh arrangements. We analyze the experimental demonstra…
The Zeno effect is investigated for soliton type pulses in a nonlinear directional coupler with dissipation. The effect consists in increase of the coupler transparency with increase of the dissipative losses in one of the arms. It is shown that localized dissipation can lead to switching of solitons between the arms. Power losses accompanying the switching can be fully compensated by using a combination of dissipative and active (in particular, parity-time -symmetric) segments.
A highly sensitive refractive index sensor based on grating-assisted strip waveguide directional coupler is proposed. The sensor is designed using two coupled asymmetric strip waveguides with a top-loaded grating structure in one of the waveguides. Maximum light couples from one waveguide to the other at the resonance wavelength, and the change in resonance wavelength with the change in refractive index of the medium in the cover region is a measure of the sensitivity. The proposed sensor would be an on-chip device with a high refractive index sensitivity of ~ 104 nm/RIU, and negligible temper…
Polymer based electro-optic modulators have shown great potentials in high frequency analog optical links. Existing commercial LiNibO3 Mach-Zehnder modulators have intrinsic drawbacks in linearity to provide high fidelity communication. In this paper, we present the design, fabrication and characterization of a traveling wave directional coupler modulator based on electro-optic polymer, which is able to provide high linearity, high speed, and low optical insertion loss. A silver ground electrode is used to reduce waveguide sidewall roughness due to the scattering of UV light in photolithograph…
We present a rotated polarization directional coupler (RPDC) on a photonic chip. We demonstrate a double-track approach to modify the distribution of refractive index between adjacent tracks and form a single waveguide with arbitrary birefringent optical axis. We construct a RPDC with the two axis-rotated waveguides coupled in a strong regime. The obtained extinction ratios on average are about 16dB and 20dB for the corresponding orthogonal polarizations. We perform the reconstruction of Stokes vector to test the projection performance of our RPDC, and observe the average fidelities up to 98.1…
The unique optical properties of phase change materials (PCMs) can be exploited to develop efficient reconfigurable photonic devices. Here, we design, model, and compare the performance of programmable 1X2 optical couplers based on: Ge$_2$Sb$_2$Te$_5$, Ge$_2$Sb$_2$Se$_4$Te$_1$, Sb$_2$Se$_3$, and Sb$_2$S$_3$ PCMs. Once programmed, these devices are passive, which can reduce the overall energy consumed compared to thermo-optic or electro-optic reconfigurable devices. Of all the PCMs studied, our ellipsometry refractive index measurements show that Sb$_2$S$_3$ has the lowest absorption in the tel…
The on-chip integration of quantum light sources has enabled the realization of complex quantum photonic circuits. However, for the practical implementation of such circuits in quantum information applications it is crucial to develop sources delivering entangled quantum photon states with on-demand tunability. Here we propose and experimentally demonstrate the concept of a widely tunable quantum light source based on spontaneous parametric down-conversion in a nonlinear directional coupler. We show that spatial photon-pair correlations and entanglement can be reconfigured on-demand by tuning …
Integrated optical devices are becoming a common tool in modern optical science and engineering. This devices should be designed to allow for precise control and manipulation of light. The femtosecond laser written (FSLW) photonic chips have proven to cope with the most current demands of integrated photonics. However, up to date the polarization degree of freedom has rarely been exploited in experiments performed on the FSLW integrated platform. The main obstacle is an intrinsically low anisotropy of laser written waveguides, preventing the design of polarizing integrated devices with small f…
An optical equivalent of the field-programmable gate array (FPGA) is of great interest to large-scale photonic integrated circuits. Previous programmable photonic devices relying on the weak, volatile thermo-optic or electro-optic effect usually suffer from a large footprint and high energy consumption. Phase change materials (PCMs) offer a promising solution due to the large non-volatile change in the refractive index upon phase transition. However, the large optical loss in PCMs poses a serious problem. Here, by exploiting an asymmetric directional coupler design, we demonstrate PCM-clad sil…
We theoretically investigate the solitary waves and their switching dynamics in a $\mathcal{PT}$-symmetric directional fiber coupler, exhibiting Kerr nonlinearity, by developing a variational analysis. We analyze the fundamental switching characteristics of the $\mathcal{PT}$-symmetric Kerr coupler in the picosecond timescale by considering the coupled-mode equation for the unperturbed nonlinear Schrödinger equation, which we compare to its conventional counterpart. The impacts of higher-order perturbations (intrapulse Raman scattering, self-steepening, and third-order dispersion) are investig…
We propose and demonstrate a passively biased 2 by 2 thermo-optic switch with high power efficiency and fast response time. The device benefits from the highly concentrated optical field of a slot waveguide mode and the strong thermo-optic effect of a nematic liquid crystal (NLC) cladding. The NLC fills the nano-slot region and is aligned by the subwavelength grating inside. The measured power consumption and thermal time constant are 0.58 mW and 11.8 microsecond, respectively, corresponding to a figure-of-merit of 6.8. The proposed silicon-organic hybrid device provides a new solution to desi…
We discuss a novel kind of nonlinear coupler with one channel filled with a negative index material (NIM). The opposite directionality of the phase velocity and the energy flow in the NIM channel facilitates an effective feedback mechanism that leads to optical bistability and gap soliton formation.
The concept of quasi-PT symmetry in optical wave guiding system is elaborated by comparing the evolution dynamics of a PT-symmetric directional coupler and a passive directional coupler. In particular we show that in the low loss regime, apart for an overall exponentially damping factor that can be compensated via a dynamical renormalization of the power flow in the system along the propagation direction, the dynamics of the passive coupler fully reproduce the one of the PT-symmetric system.
We study both manipulation and detection of two-mode spatial quantum states of light by means of a reconfigurable integrated device built in an electro-optical material in a Kolgelnik-Schmidt configuration, which provides higher error tolerance to fabrication defects and larger integration density than other current schemes. SU(2) transformations are implemented on guided spatial modes in such a way that reconstruction of both the optical field-strength quantum probability distribution, via spatial two-mode homodyne detection, and the full optical field-strength wavefunction, by means of weak …
We address nonlinear signal switching between two low-index defect channels induced in periodic optical lattices. In contrast to conventional directional couplers, where the guiding mechanism is total internal reflection or refraction, in such Bragg-type coupler, the guidance is of a photonic-bandgap origin. The coupling length in the low-index coupler is controlled by the lattice parameters and by the channel spacing. In the nonlinear regime the Bragg-type coupler behaves as an all-optical switch, exhibiting a remarkable difference of switching power for focusing versus defocusing nonlinearit…
Optical nanofiber waveguides are widely used for near-field delivery and measurement of light. Despite their versatility and efficiency, nanofibers have a critical drawback - their inability to maintain light's polarization state on propagation. Here, we design a directional coupler consisting of two crossed nanofibers to probe the polarization state at the waist region. Directionality of coupling occurs due to asymmetric dipolar emission or spin-locking when the evanescent field pattern breaks the mirror symmetry of the crossed-nanofiber system. We demonstrate that, by monitoring the outputs …
In this paper, we describe the implementation of leakage radiation microscopy (LRM) to probe the chirality of plasmonic nanostructures. We demonstrate experimentally spin-driven directional coupling as well as vortex generation of surface plasmon polaritons (SPPs) by nanostructures built with T-shaped and $Λ$- shaped apertures. Using this far-field method, quantitative inspections, including directivity and extinction ratio measurements, are achieved via polarization analysis in both image and Fourier planes. To support our experimental findings, we develop an analytical model based on a multi…
From the onset of high-speed optical communications, lithium niobite (LN) has been the material of choice for electro-optic modulators owing to its large electro-optic response, wide transparent window, excellent thermal stability and long-term material reliability. Conventional LN electro-optic modulators while continue to be the workhorse of the optoelectronic industry become progressively too bulky, expensive and power hungry to fully serve the needs of this industry rapidly progressing towards highly integrated, cost-effective and energy efficient components and circuits. Recently develope…
An LLM-Orchestrated Agent for Directional-Coupler Design with Self-Consistent Eigenmode and FDTD Validation
Department of Mechanical Engineering, University of Maryland, College Park（马里兰大学学院市机械工程系）；Apsidal LLC；Department of Radiation Oncology, Stanford University（斯坦福大学放射肿瘤科）
We propose a directional coupler exploiting the framework of adiabatic passage for two level atomic systems with configuration dependent Allen-Eberly scheme. Recently developed shortcut to adiabatic passage method (STA), which uses transitionless quantum driving algorithm, is applied to the coupler. The study shows that it is possible to reduce the device length significantly using STA, keeping the efficiency of power transfer100%.Shortcut approach shows much superiority in terms of robustness and fidelity in power switching compared to the adiabatic one.
