Broadband low loss and ultra-low crosstalk waveguide crossings based on multimode interferometer for 840 nm operation
Stefan Nevlacsil, Paul Muellner, Martin Sagmeister, Jochen Kraft, Rainer Hainberger
备注：
12 pages, 5 figures \c{opyright} 2020 Optical Society of America. Users may use, reuse, and build upon the article, or use the article for text or data mining, so long as such uses are for non-commercial purposes and appropriate attribution is maintained. All other rights are reserved
Broadband low loss and ultra-low crosstalk waveguide crossings are a crucial component for photonic integrated circuits to allow a higher integration density of functional components and an increased flexibility in the layout. We report the design of optimized silicon nitride waveguide crossings based on multimode interferometer structures for intersecting light paths of TE/TE-like, TM/TM-like and TE/TM-like polarized light in the near infrared wavelength region of 790 nm to 890 nm. The crossing design for diverse polarization modes facilitates dual polarization operation on a single chip. For all configurations the loss of a single crossing was measured to be 0.05 dB at 840 nm. Within the 100 nm bandwidth losses stayed below 0.16 dB. The crosstalk was estimated to be on the order of -60 dB by means of 3D finite difference time domain simulations.
Mode-division-multiplexing (MDM) is attractive as a means to increase the link capacity of a single wavelength for optical interconnects via the use of multiple mode-channels in multimode bus waveguide.In order to route the data in MDM systems, waveguide bends are typically needed.In particular, ultra-sharp bends are desirable for reducing the chip area occupied by high-density photonic intergrated circuits (PICs). In this work, we propose and demonstrate a novel meta-surfaced waveguide structure on silicon, which enables ultral-sharp multimode waveguide bends to have low loss and low crosstal…
Multimode waveguide crossings are crucial components for novel mode-division-multiplexing systems. One of the challenges of multimode waveguide routing in MDM systems is decreasing the inter-mode crosstalk and mode leakage of waveguide crossings. In this work, we present the intersections of three and four waveguides based on polygonal Maxwell's fisheye lens via transformation optics. The designed lenses are implemented by mapping their refractive index to the thickness of guiding Si layer. The three-dimensional finite-difference time-domain simulations are used to evaluate the performance of …
Low propagation loss in high confinement waveguides is critical for chip-based nonlinear photonics applications. Sophisticated fabrication processes which yield sub-nm roughness are generally needed to reduce scattering points at the waveguide interfaces in order to achieve ultralow propagation loss. Here, we show ultralow propagation loss by shaping the mode using a highly multimode structure to reduce its overlap with the waveguide interfaces, thus relaxing the fabrication processing requirements. Microresonators with intrinsic quality factors (Q) of 31.8 $\pm$ 4.4 million are experimentally…
Dense waveguide arrays with half-wavelength-pitch, low-crosstalk, broadband, and flexible routing capability are essential for integrated photonics. However, achieving such performance is challenging due to the relatively weaker confinement of dielectric waveguides and the increased interactions among densely packed waveguides. Here, leveraging the artificial gauge field mechanism, we demonstrate half-wavelength-pitched dense waveguide arrays, consisting of 64 waveguides, in silicon with -30dB crosstalk suppression from 1480nm to 1550nm. The waveguide array features negligible insertion loss f…
The miniaturization of pixel is essential for achieving high-resolution, planar, compact-size focal plane arrays (FPAs); however, the resulted increase in the optical crosstalk between adjacent pixels leads to serious drawback and trade-off. In the current work, we design and propose an efficient broadband polarization-insensitive all-dielectric metasurface lens array-based focal plane arrays (FPA) operating in the mid-wave infrared (MWIR). High focusing efficiency over 0.85 with superior optical crosstalk performance is achieved. We demonstrated that optical crosstalk can be reduced to low le…
We propose and design an ultra-compact and broadband tunable multimode interference (MMI) splitter in mid-infrared based on graphene plasmonic waveguides. The size of the device is only 0.56μm*1.2μm, which corresponds to device area of only about 0.014λ^2, where λ is the vacuum wavelength. And the center wavelength of the device can be tuned in a broad band from 7μm to 9μm with the Fermi level of graphene varied from 0.5eV to 1eV. Furthermore, the device is easy to be fabricated on chip.
We propose non-phase-matched sum frequency generation (SFG) as a method for characterizing broadband multimode light. We demonstrate its advantages using high-gain parametric down conversion (PDC) as an example. By generating the sum frequency in the near-surface region of a nonlinear crystal, we increase the SFG efficiency and get rid of the modulation caused by chromatic dispersion, known as Maker fringes. The obtained results interpreted in terms of the Schmidt mode formalism reveal the sensitivity of the SFG spectrum to the number of frequency modes. Furthermore, we demonstrate efficient n…
A general-purpose all-fiber spectrometer is demonstrated to overcome the trade-off between spectral resolution and bandwidth. By integrating a wavelength division multiplexer with five multimode optical fibers, we have achieved 100 nm bandwidth with 0.03 nm resolution at wavelength 1500 nm. An efficient algorithm is developed to reconstruct the spectrum from the speckle pattern produced by interference of guided modes in the multimode fibers. Such algorithm enables a rapid, accurate reconstruction of both sparse and dense spectra in the presence of noise.
Multimode interference couplers are a fundamental building block in many integrated photonic systems, ranging from high-speed coherent receivers to quantum splitters. However, their basic structure has remained fundamentally unchanged for almost four decades, limiting their size and operation bandwidth. Using sub-wavelength metamaterials, photonic devices with break-through size and performance have been recently reported. Leveraging the inherent anisotropy of these structures, here we derive a semi-analytic expression that enables the design of compact and ultra broadband multimode interferen…
In this contribution, a comprehensive experimental study of photoluminescence from Pr3+/Dy3+ co-doped selenide-chalcogenide multimode fiber samples is discussed. The selenide-chalcogenide multimode fiber samples co-doped with 500 ppm of Pr3+ ions and 500 ppm of Dy3+ ions are prepared using conventional melt-quenching. The main objective of the study is the analysis of the pumping wavelength selection on the shape of the output spectrum. For this purpose, the Pr3+/Dy3+ co-doped selenide-chalcogenide multimode fiber samples are illuminated at one end using pump lasers operating at the wavelength…
We propose an operating principle to achieve broadband and highly tunable mode conversion and amplification exploiting inter-modal four wave mixing in a multimode fiber. A bandwidth of 30 nanometers is demonstrated by properly designing a simple step-index silica fiber.
Mode-division multiplexing (MDM) is an emerging large-capacity data communication technology utilizing orthogonal guiding modes as independent data streams. One of the challenges of multimode waveguide routing in MDM systems is decreasing the mode leakage of waveguide crossings. In this article, a square Maxwell's fish-eye lens as waveguide crossing medium based on quasi-conformal transformation optics is designed and implemented on the silicon-on-insulator platform. Two approaches were taken to realize the designed lens: graded photonic crystal and varying the thickness of Si slab waveguide. …
We experimentally demonstrate broadband waveguide crossing arrays showing ultra low loss down to $0.04\,$dB/crossing ($0.9\%$), matching theory, and crosstalk suppression over $35\,$dB, in a CMOS-compatible geometry. The principle of operation is the tailored excitation of a low-loss spatial Bloch wave formed by matching the periodicity of the crossing array to the difference in propagation constants of the 1$^\text{st}$- and 3$^\text{rd}$-order TE-like modes of a multimode silicon waveguide. Radiative scattering at the crossing points acts like a periodic imaginary-permittivity perturbation t…
Cavity optomagnonics has emerged as a promising platform for studying coherent photon-spin interactions as well as tunable microwave-to-optical conversion. However, current implementation of cavity optomagnonics in ferrimagnetic crystals remains orders of magnitude larger in volume than state-of-the-art cavity optomechanical devices, resulting in very limited magneto-optical interaction strength. Here, we demonstrate a cavity optomagnonic device based on integrated waveguides and its application for microwave-to-optical conversion. By designing a ferrimagnetic rib waveguide to support multiple…
Observation of Photon Bunching in Broadband Multimode Thermal Light Enabled by Temporal Imaging
University of Warsaw（华沙大学）；Paderborn University（帕德博恩大学）；Univ. Lille, CNRS, UMR 8523 – PhLAM – Physique des Lasers Atomes et Molécules（里尔大学，法国国家科学研究中心，联合研究实验室8523 - 激光物理、原子和分子物理学）；Institut für Quantenoptik, Universität Ulm（乌尔姆大学量子光学研究所）
Leveraging the spatial modes of multimode waveguides using mode-division multiplexing (MDM) on an integrated photonic chip allows unprecedented scaling of bandwidth density for on-chip communication. Switching channels between waveguides is critical for future scalable optical networks, but its implementation in multimode waveguides must address how to simultaneously control modes with vastly different optical properties. Here we present a platform for switching signals between multimode waveguides based on individually processing the spatial mode channels using single-mode elements. Using thi…
An optical equivalent of the field-programmable gate array (FPGA) is of great interest to large-scale photonic integrated circuits. Previous programmable photonic devices relying on the weak, volatile thermo-optic or electro-optic effect usually suffer from a large footprint and high energy consumption. Phase change materials (PCMs) offer a promising solution due to the large non-volatile change in the refractive index upon phase transition. However, the large optical loss in PCMs poses a serious problem. Here, by exploiting an asymmetric directional coupler design, we demonstrate PCM-clad sil…
The singlemode condition is one of the most important design rules for optical waveguides in guided-wave optics. The reason following the singlemode condition is that higher-order modes might be excited and thus introduce some undesired mode-mismatching loss as well as inter-mode crosstalk when light propagates along an optical waveguide beyond the singlemode regime. As a result, multimode photonic waveguides are usually not allowed. In this paper, we propose the concept of silicon photonics beyond the singlemode regime, developed with low-loss and low-crosstalk light propagation in multimode …
We find the one-way mode can be well-confined at the magnetic domain wall by the photonic bandgap of gyromagnetic bulk material. Utilizing the well-confined one-way mode at the domain wall, we demonstrate the photonic one-way waveguide, splitter and bender can be realized with simple structures, which are predicted to be high-efficiency, broadband, frequency-independent, reflection-free, crosstalk-proof and robustness against disorder. Additionally, we find that the splitter and bender in our proposal can be transformed into each other with magnetic control, which may have great potential appl…
Large amounts of hyperpolarized 3He gas with high nuclear polarization rates are required for use in neutron spin filters or nuclear magnetic resonance imaging of human lung. Very high efficiency can be obtained by metastability exchange optical pumping using multimode lasers to excite the 23S-23P transition at 1083 nm. Broadband Ytterbium-doped tunable fiber lasers have been designed for that particular application. Different options for the architecture of the fiber oscillator are presented and compared. Emphasis is given to a linear cavity configuration that includes a high reflectivity fib…
Photo-induced forces can be used to manipulate and cool the mechanical motion of oscillators. When the oscillator is used as a force sensor, such as in atomic force microscopy, active feedback is an enticing route to enhancing measurement performance. Here, we show broadband multimode cooling of $-23$ dB down to a temperature of $8 \pm 1$~K in the stationary regime. Through the use of periodic quiescence feedback cooling, we show improved signal-to-noise ratios for the measurement of transient signals. We compare the performance of real feedback to numerical post-processing of data and show th…
The advent of dispersion-engineered and highly nonlinear nanophotonics is expected to open up an all-optical path towards the strong-interaction regime of quantum optics by combining high transverse field confinement with ultra-short-pulse operation. Obtaining a full understanding of photon dynamics in such broadband devices, however, poses major challenges in the modeling and simulation of multimode non-Gaussian quantum physics, highlighting the need for sophisticated reduced models that facilitate efficient numerical study while providing useful physical insight. In this manuscript, we revie…
We designed and demonstrate a fiber-based amplified spontaneous emission (ASE) source with low spatial coherence, low temporal coherence, and high power per mode. ASE is produced by optically pumping a large gain core multimode fiber while minimizing optical feedback to avoid lasing. The fiber ASE source provides 270 mW of continuous wave emission, centered at λ=1055 nm with a full-width half-maximum bandwidth of 74 nm. The emission is distributed among as many as ~70 spatial modes, enabling efficient speckle suppression when combined with spectral compounding. Finally, we demonstrate speckle-…
The development of optical fibers has revolutionized telecommunications by enabling long-distance broad-band transmission with minimal loss. In turn, the ubiquity of high-quality low-cost fibers enabled a number of additional applications, including fiber sensors, fiber lasers, and imaging fiber bundles. Recently, we showed that a mutlimode optical fiber can also function as a spectrometer by measuring the wavelength-dependent speckle pattern formed by interference between the guided modes. Here, we reach a record resolution of 1 pm at wavelength 1500 nm using a 100 meter long multimode fiber,…
The Maxwell's fisheye (MFE) lens, due to its focusing properties, is an interesting candidate for implementing the crossing of multiple waveguides. The MFE lens is implemented by two different structures: concentric cylindrical multilayer and radially diverging gourd-shaped rods. Realization of the refractive index profile of the lens is achieved by controlling the thickness ratio of the alternating Si and SiO2 layers determined by effective medium theory. Both structures are optimized to cover the entire C-band in the single mode implementation. The transmission efficiency of the ring-based s…
Smooth-Curvature Bend Design Guided by Variational Analysis for Adiabatic Multimode Integrated Photonics
Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology（华中科技大学武汉国家光电研究中心）；School of Optical and Electronic Information, Huazhong University of Science and Technology（华中科技大学光学与电子信息学院）；Optics Valley Laboratory（光谷实验室）
The realization of ultra-compact passive silicon photonic devices is becoming more and more important for the future large-scale photonic integration as desired for many systems. Although some compact silicon photonic devices have been demonstrated by using inverse design, the device performance is still insufficient for real applications. Here, we propose and realize several representative ultra-compact advanced passive silicon photonic devices with decent performances by introducing subwavelength-grating (SWG) structures developed by our high-efficiency inverse design method. These devices a…
