User scheduling, beamforming and energy coordination are investigated in smart-grid powered cellular networks (SGPCNs), where the base stations are powered by a smart grid and natural renewable energy sources. Heterogeneous energy coordination is considered in SGPCNs, namely energy merchandizing with the smart grid and energy exchanging among the base stations. A long-term grid-energy expenditure minimization problem with proportional-rate constraints is formulated for SGPCNs. Since user scheduling is coupled with the beamforming vectors, the formulated problem is challenging to handle via standard convex optimization methods. In practice, the beamforming vectors need to be updated over each slot according to the channel variations. User scheduling needs to be updated over several slots (frame) since the frequent scheduling of user equipment can cause reliability issues. Therefore, the Lyapunov optimization method is used to decouple the problem. A practical two-scale algorithm is proposed to schedule users at each frame, and obtain the beamforming vectors and amount of exchanged natural renewable energy at each slot. We prove that the proposed two-scale algorithm can asymptotically achieve the optimal solutions via tuning a control parameter. Numerical results verify the performance of the proposed two-scale algorithm.
In this correspondence, we consider an amplify-and-forward relay network in which relayed information is overheard by an eavesdropper. In order to confound the eavesdropper, a wireless-powered jammer is also considered which harvests energy from a multiple-antenna source. We proposed a new secure beamforming scheme in which beamforming vector is a linear combination of the energy beamforming (EB) and information beamforming (IB) vectors. We also present a new closed-form solution for the proposed beamforming vector which is shown to achieve a higher secrecy rate as compared to the trivial EB a…
In this work, we maximize the secrecy rate of the wireless-powered untrusted relay network by jointly designing power splitting (PS) ratio and relay beamforming with the proposed global optimal algorithm (GOA) and local optimal algorithm (LOA). Different from the literature, artificial noise (AN) sent by the destination not only degrades the channel condition of the eavesdropper to improve the secrecy rate, but also becomes a new source of energy powering the untrusted relay based on PS. Hence, it is of high economic benefits and efficiency to take advantage of AN compared with the literature.…
The new paradigm of wirelessly powered two-tier heterogeneous networks (HetNets) is considered in this paper. Specifically, the femtocell base station (FBS) is powered by a power beacon (PB) and transmits confidential information to a legitimate femtocell user (FU) in the presence of a potential eavesdropper (EVE) and a macro base station (MBS). In this scenario, we investigate the secrecy beamforming design under three different levels of FBS-EVE channel state information (CSI), namely, the perfect, imperfect and completely unknown FBS-EVE CSI. Firstly, given the perfect global CSI at the FBS…
The physical-layer security issue in the multiple non-regenerative wireless-powered relay (WPR) networks is investigated in this letter, where the idle relay is treated as a potential eavesdropper. To guarantee secure communication, the destination-based artificial noise is sent to degrade the receptions of eavesdroppers, and it also becomes a new source of energy powering relays to forward the information with power splitting (PS) technique. We propose an efficient algorithm ground on block-wise penalty function method to jointly optimize PS ratio and beamforming to maximize the secrecy rate.…
This paper investigates the extent to which spectrum sharing in mmWave networks with multiple cellular operators is a viable alternative to traditional dedicated spectrum allocation. Specifically, we develop a general mathematical framework by which to characterize the performance gain that can be obtained when spectrum sharing is used, as a function of the underlying beamforming, operator coordination, bandwidth, and infrastructure sharing scenarios. The framework is based on joint beamforming and cell association optimization, with the objective of maximizing the long-term throughput of the …
This letter deals with the opportunistic beamforming (OBF) scheme for multi-antenna downlink with spatial randomness. In contrast to conventional OBF, the terminals return only 1-bit feedback, which is powered by wireless power transfer through a rectenna array. We study two fundamental topologies for the combination of the rectenna elements; the direct-current combiner and the radio-frequency combiner. The beam outage probability is derived in closed form for both combination schemes, by using high order statistics and stochastic geometry.
In this paper, we study the average throughput performance of energy beamforming in a multi-antenna wireless-powered communication network (WPCN). The considered network consists of one hybrid access-point (AP) with multiple antennas and a single antenna user. The user does not have constant power supply and thus needs to harvest energy from the signals broadcast by the AP in the downlink (DL), before sending its data back to the AP with the harvested energy in the uplink (UL). We derive closed-form expressions of the average throughput and their asymptotic expressions at high SNR for both del…
This paper studies a system where a set of $N$ relay nodes harvest energy from the signal received from a source to later utilize it when forwarding the source's data to a destination node via distributed beamforming. To this end, we derive (approximate) analytical expressions for the mean SNR at destination node when relays employ: i) time-switching based energy harvesting policy, ii) power-splitting based energy harvesting policy. The obtained results facilitate the study of the interplay between the energy harvesting parameters and the synchronization error, and their combined impact on mea…
This paper investigates a multi-input single-output (MISO) wireless powered communication network (WPCN) under the protocol of harvest-then-transmit. The power station (PS) with reliable power supply can replenish the passive user nodes by wireless power transfer (WPT) in the downlink (DL), then each user node transmits independent information to the sink by a time division multiple access (TDMA) scheme in the uplink (UL). We consider the joint time allocation and beamforming design to maximize the system sum-throughput. The semidefinite relaxation (SDR) technique is applied to solve the nonco…
In the small-cell networks (SCNs) with multiple small-cell base stations (ScBSs), the joint design of beamforming vectors, user scheduling and ScBS sleeping is investigated with the constraints on proportional rate. A long-term grid-energy expenditure minimization problem is formulated for the considered SCNs, which are powered by the smart grid and natural renewable energy. Since the scheduled user indicators are coupled with the beamforming vectors, the formulated problem is challenging to handle. In order to decouple the beamforming vectors from the scheduled user indicators, the Lyapunov o…
Wireless powered sensor networks (WPSNs) have emerged as a key development towards the future self-sustainable Internet of Things (IoT) networks. To achieve a good balance between self-sustainability and reliability, partially WPSNs with a mixed power solution are desirable for practical applications. Specifically, most of the sensor nodes are wireless powered but the key sensor node adopts traditional wire/battery power for reliability. As a result, this paper mainly investigates optimal design for the partially WPSNs in which simultaneous wireless information and power transfer (SWIPT) is ad…
The newly emerging wireless powered communication networks (WPCNs) have recently drawn significant attention, where radio signals are used to power wireless terminals for information transmission. In this paper, we study a WPCN where one multi-antenna access point (AP) coordinates energy transfer and information transfer to/from a set of single-antenna users. A harvest-then-transmit protocol is assumed where the AP first broadcasts wireless power to all users via energy beamforming in the downlink (DL), and then the users send their independent information to the AP simultaneously in the uplin…
This paper characterizes the performance of coordinated beamforming with dynamic clustering. A downlink model based on stochastic geometry is put forth to analyze the performance of such base station (BS) coordination strategy. Analytical expressions for the complementary cumulative distribution function (CCDF) of the instantaneous signal-to-interference ratio (SIR) are derived in terms of relevant system parameters, chiefly the number of BSs forming the coordination clusters, the number of antennas per BS, and the pathloss exponent. Utilizing this CCDF, with pilot overheads further incorporat…
The application of renewable energy is a promising solution to realize the Green Communications. However, if the cellular systems are solely powered by the renewable energy, the weather dependence of the renewable energy arrival makes the systems unstable. On the other hand, the proliferation of the smart grid facilitates the loads with two-way energy trading capability. Hence, a hybrid powered cellular system, which combines the smart grid with the base stations, can reduce the grid energy expenditure and improve the utilization efficiency of the renewable energy. In this paper, the long-term…
We propose techniques for optimizing transmit beamforming in a full-duplex multiple-input-multiple-output (MIMO) wireless-powered communication system, which consists of two phases. In the first phase, the wireless-powered mobile station (MS) harvests energy using signals from the base station (BS), whereas in the second phase, both MS and BS communicate to each other in a full-duplex mode. When complete instantaneous channel state information (CSI) is available, the BS beamformer and the time-splitting (TS) parameter of energy harvesting are jointly optimized in order to obtain the BS-MS rate…
In this paper, we consider a three-node cooperative wireless powered communication system consisting of a multi-antenna hybrid access point (H-AP) and a single-antenna relay and a single-antenna user. The energy constrained relay and user first harvest energy in the downlink and then the relay assists the user using the harvested power for information transmission in the uplink. The optimal energy beamforming vector and the time split between harvest and cooperation are investigated. To reduce the computational complexity, suboptimal designs are also studied, where closed-form expressions are …
This letter studies a multi-antenna wireless powered communication (WPC) system with co-channel energy and information transfer, where a wireless device (WD), powered up by wireless energy transfer (WET) from an energy transmitter (ET), communicates to an information receiver (IR) over the same frequency band. We maximize the achievable data rate from the WD to the IR by jointly optimizing the energy beamforming at the ET and the information beamforming at the WD, subject to their individual transmit power constraints. We obtain the optimal solution to this problem in closed-form, where the op…
As a revolution in networking, Internet of Things (IoT) aims at automating the operations of our societies by connecting and leveraging an enormous number of distributed devices (e.g., sensors and actuators). One design challenge is efficient wireless data aggregation (WDA) over tremendous IoT devices. This can enable a series of IoT applications ranging from latency-sensitive high-mobility sensing to data-intensive distributed machine learning. Over-the-air (functional) computation (AirComp) has emerged to be a promising solution that merges computing and communication by exploiting analogwav…
In this paper we demonstrate the rate gains achieved by two-tier heterogeneous cellular networks (HetNets) with varying degrees of coordination between macrocell and microcell base stations (BSs). We show that without the presence of coordination, network densification does not provide any gain in the sum rate and rapidly decreases the mean per-user signal-to-interference-plus-noise-ratio (SINR). Our results show that coordination reduces the rate of SINR decay with increasing numbers of microcell BSs in the system. Validity of the analytically approximated mean per-user SINR over a wide range…
In this paper, a novel intelligent reflecting surface (IRS)-assisted wireless powered communication network (WPCN) architecture is proposed for power-constrained Internet-of-Things (IoT) smart devices, where IRS is exploited to improve the performance of WPCN under imperfect channel state information (CSI). We formulate a hybrid access point (HAP) transmit energy minimization problem by jointly optimizing time allocation, HAP energy beamforming, receiving beamforming, user transmit power allocation, IRS energy reflection coefficient and information reflection coefficient under the imperfect CS…
Performance of multicell systems is inevitably limited by interference and available resources. Although intercell interference can be mitigated by Base Station (BS) Coordination, the demand on inter-BS information exchange and computational complexity grows rapidly with the number of cells, subcarriers, and users. On the other hand, some of the existing coordination beamforming methods need computation of pseudo-inverse or generalized eigenvector of a matrix, which are practically difficult to implement in a real system. To handle these issues, we propose a novel linear beamforming across a s…
This paper maximizes the achievable throughput of a relay-assisted wirelessly powered communications system, where an energy constrained source, helped by an energy constrained relay and both powered by a dedicated power beacon (PB), communicates with a destination. Considering the time splitting approach, the source and relay first harvest energy from the PB, which is equipped with multiple antennas, and then transmits information to the destination. Simple closed-form expressions are derived for the optimal PB energy beamforming vector and time split for energy harvesting and information tra…
This paper considers an active intelligent reflecting surface (IRS)-aided wireless powered communication network (WPCN), where devices first harvest energy and then transmit information to a hybrid access point (HAP). Different from the existing works on passive IRS-aided WPCNs, this is the first work that introduces the active IRS in WPCNs. To guarantee fairness, the problem is formulated as an amplifying power-limited weighted sum throughput (WST) maximization problem, which is solved by successive convex approximation technique and fractional programming alternatively. To balance the perfor…
For a self-sustaining wireless communication system in Internet-of-Things (IoT) networks, energy harvesting (EH) can be implemented at each user node as a constant renewable power supply source. Hence, an investigation into the use of wireless powered communication network (WPCN) protocols to facilitate communication between an access point (AP) and multiple mobile users (MUs) is presented in this paper. The AP has multiple antennas and operates in the full-duplex (FD) mode. The MUs, on the other hand, have single antennas and works in the half-duplex (HD) mode. Each MU communicating with the …
In this paper, we investigate a multi-node multi-antenna wireless-powered sensor networks (WPSN) comprised of one power beacon and multiple sensor nodes. We have implemented a real-life multi-node multi-antenna WPSN testbed that operates in real time. We propose a beam-splitting beamforming technique that enables a power beacon to split microwave energy beams towards multiple nodes for simultaneous charging. We experimentally demonstrate that the beam-splitting beamforming technique achieves the Pareto optimality. For a perpetual operation of the sensor nodes, we adopt an energy neutral contro…
3D beamforming is a promising approach for interference coordination in cellular networks which brings significant improvements in comparison with conventional 2D beamforming techniques. This paper investigates the problem of joint beamforming design and tilt angle adaptation of the BS antenna array for maximizing energy efficiency (EE) in downlink of multi-cell multi-user coordinated cellular networks. An iterative algorithm based on fractional programming approach is introduced to solve the resulting non-convex optimization problem. In each iteration, users are clustered based on their eleva…
As network deployments become denser, interference arises as a dominant performance degradation factor. To confront with this trend, Long Term Evolution (LTE) incorporated features aiming at enabling cooperation among different base stations, a technique termed as Coordinated Multi Point (CoMP). Recent field trial results and theoretical studies of the performance of CoMP schemes revealed, however, that their gains are not as high as initially expected, despite their large coordination overhead. In this paper, we review recent advanced Coordinated Beamforming (CB) schemes, a special family of …
In this paper, we investigate a unified linear transceiver design with mean-square-error (MSE) as the objective function for a wide range of wireless systems. The unified design is based on an elegant mathematical programming technology namely quadratic matrix programming (QMP). It is revealed that for different wireless systems such as multi-cell coordination systems, multi-user MIMO systems, MIMO cognitive radio systems, amplify-and-forward MIMO relaying systems, the MSE minimization beamforming design problems can always be solved by solving a number of QMP problems. A comprehensive framewo…
In this paper, we consider a wireless powered multi-relay network in which a multi-antenna hybrid access point underlaying a cellular system transmits information to distant receivers. Multiple relays capable of energy harvesting are deployed in the network to assist the information transmission. The hybrid access point can wirelessly supply energy to the relays, achieving multi-user gains from signal and energy cooperation. We propose a joint optimization for signal beamforming of the hybrid access point as well as wireless energy harvesting and collaborative beamforming strategies of the rel…
The synergetic gains of spectrum sharing and millimeter wave communication networks have recently attracted attention, owing to the interference canceling benefits of highly-directional beamforming in such systems. In principle, fine-tuned coordinated scheduling and beamforming can drastically reduce cross-operator interference. However, this goes at the expense of the exchange of global channel state information, which is not realistic in particular when considering inter-operator coordination. Indeed, such an exchange of information is expensive in terms of backhaul infrastructure, and besid…
Modern cellular networks in traditional frequency bands are notoriously interference-limited especially in urban areas, where base stations are deployed in close proximity to one another. The latest releases of Long Term Evolution (LTE) incorporate features for coordinating downlink transmissions as an efficient means of managing interference. Recent field trial results and theoretical studies of the performance of joint transmission (JT) coordinated multi-point (CoMP) schemes revealed, however, that their gains are not as high as initially expected, despite the large coordination overhead. Th…
This work studies the joint beamforming design problem of achieving max-min rate fairness in a satellite-terrestrial integrated network (STIN) where the satellite provides wide coverage to multibeam multicast satellite users (SUs), and the terrestrial base station (BS) serves multiple cellular users (CUs) in a densely populated area. Both the satellite and BS operate in the same frequency band. Since rate-splitting multiple access (RSMA) has recently emerged as a promising strategy for non-orthogonal transmission and robust interference management in multi-antenna wireless networks, we present…
To improve the cellular energy efficiency, without sacrificing quality-of-service (QoS) at the users, the network topology must be densified to enable higher spatial reuse. We analyze a combination of two densification approaches, namely "massive" multiple-input multiple-output (MIMO) base stations and small-cell access points. If the latter are operator-deployed, a spatial soft-cell approach can be taken where the multiple transmitters serve the users by joint non-coherent multiflow beamforming. We minimize the total power consumption (both dynamic emitted power and static hardware power) whi…
Multi-cell wireless systems usually suffer both intra-cell and inter-cell interference, which can be mitigated via coordinated multipoint (CoMP) techniques. Previous works on multi-cell analysis for the microwave band generally consider fully digital beamforming that requires a complete radio-frequency chain behind each antenna, which is less practical for millimeter-wave (mmWave) systems where large amounts of antennas are necessary to provide sufficient beamforming gain and to enable transmission and reception of multiple data streams per user. This paper proposes four analog and digital hyb…
The high reflect beamforming gain of the intelligent reflecting surface (IRS) makes it appealing not only for wireless information transmission but also for wireless power transfer. In this letter, we consider an IRS-assisted wireless powered communication network, where a base station (BS) transmits energy to multiple users grouped into multiple clusters in the downlink, and the clustered users transmit information to the BS in the manner of hybrid non-orthogonal multiple access and time division multiple access in the uplink. We investigate optimizing the reflect beamforming of the IRS and t…
In a cooperative multiple-antenna downlink cellular network, maximization of a concave function of user rates is considered. A new linear precoding technique called soft interference nulling (SIN) is proposed, which performs at least as well as zero-forcing (ZF) beamforming. All base stations share channel state information, but each user's message is only routed to those that participate in the user's coordination cluster. SIN precoding is particularly useful when clusters of limited sizes overlap in the network, in which case traditional techniques such as dirty paper coding or ZF do not dir…
In this paper, we study a multi-cluster Wireless Powered Communication Network (WPCN) where each cluster of users cooperate with a Cluster Head (CH) and a Hybrid Access Point (HAP). All users are equipped with multiple antennas. This HAP employs beamforming to deliver energy to the users in the downlink phase. The users of each cluster transmit their signals to the HAP and to their CHs in the uplink phase. In the next step the CHs first relay the signals of their cluster users and then transmit their own information to the HAP. We design the Energy Beamforming (EB) matrix, transmit covariance …
In this paper, a two-hop decode-and-forward cognitive radio system with deployed interference alignment is considered. The relay node is energy-constrained and scavenges the energy from the interference signals. In the literature, there are two main energy harvesting protocols, namely, time-switching relaying and power-splitting relaying. We first demonstrate how to design the beamforming matrices for the considered primary and secondary networks. Then, the system capacity under perfect and imperfect channel state information scenarios, considering different portions of time-switching and powe…
Wirelessly powered backscatter communication (WPBC) has been identified as a promising technology for low-power communication systems, which can reap the benefits of energy beamforming to improve energy transfer efficiency. However, existing studies on energy beamforming fail to simultaneously take energy supply and information transfer in WPBC into account. This paper takes the first step to fill this gap, by considering the restrictive relationship between the energy harvesting rate and achievable rate with estimated backscatter channel state information (BS-CSI). To ensure reliable communic…
This paper studies a two-hop decode-and-forward underlay cognitive radio system with interference alignment technique. An energy-constrained relay node harvests the energy from the interference signals through a power-splitting (PS) relaying protocol. Firstly, the beamforming matrices design for the primary and secondary networks is demonstrated. Then, a bit error rate (BER) performance of the system under perfect and imperfect channel state information (CSI) scenarios for PS protocol is calculated. Finally, the impact of the CSI mismatch parameters on the BER performance is simulated.
RF energy harvesting is a promising potential solution to provide convenient and perpetual energy supplies to low-power wireless sensor networks. In this paper, we investigate the energy harvesting performance of a wireless sensor node powered by harvesting RF energy from existing multiuser MIMO system. Specifically, we propose a random unitary beamforming (RUB) based cooperative beam selection scheme to enhance the energy harvesting performance at the sensor. Under a constant total transmission power constraint, the multiuser MIMO system tries to select a maximal number of active beams for da…
This paper proposes energy-efficient coordinated beamforming strategies for multi-cell multi-user multiple-input single-output system. We consider a practical power consumption model, where part of the consumed power depends on the base station or user specific data rates due to coding, decoding and backhaul. This is different from the existing approaches where the base station power consumption has been assumed to be a convex or linear function of the transmit powers. Two optimization criteria are considered, namely network energy efficiency maximization and weighted sum energy efficiency max…
We study two-user multiple-input single-output (MISO) wireless powered communication networks (WPCNs), where the user devices are equipped with non-linear energy harvesting (EH) circuits. We consider time-division duplex (TDD) transmission, where the users harvest power from the signal received in the downlink phase, and then, utilize this harvested power for information transmission in the uplink phase. In contrast to existing works, we adopt a non-linear model of the harvested power based on a precise analysis of the employed EH circuit. We jointly optimize the beamforming vectors in the dow…
We study here the problem of Antenna Domain Formation (ADF) in cloud RAN systems, whereby multiple remote radio-heads (RRHs) are each to be assigned to a set of antenna domains (ADs), such that the total interference between the ADs is minimized. We formulate the corresponding optimization problem, by introducing the concept of \emph{interference coupling coefficients} among pairs of radio-heads. We then propose a low-overhead algorithm that allows the problem to be solved in a distributed fashion, among the aggregation nodes (ANs), and establish basic convergence results. Moreover, we also pr…
In this paper, we investigate and analyze energy recycling for a reconfigurable intelligent surface (RIS)-aided wireless-powered communication network. As opposed to the existing works where the energy harvested by Internet of things (IoT) devices only come from the power station, IoT devices are also allowed to recycle energy from other IoT devices. In particular, we propose group switching- and user switching-based protocols with time-division multiple access to evaluate the impact of energy recycling on system performance. Two different optimization problems are respectively formulated for …
A harvest-use-store power splitting (PS) relaying strategy with distributed beamforming is proposed for wirelesspowered multi-relay cooperative networks in this paper. Different from the conventional battery-free PS relaying strategy, harvested energy is prioritized to power information relaying while the remainder is accumulated and stored for future usage with the help of a battery in the proposed strategy, which supports an efficient utilization of harvested energy. However, PS affects throughput at subsequent time slots due to the battery operations including the charging and discharging. …
This letter studies a wireless-powered amplify-and-forward relaying system, where an energy-constrained relay node assists the information transmission from the source to the destination using the energy harvested from the source. We propose a novel two-phase protocol for efficient energy transfer and information relaying, in which the relay operates in full-duplex mode with simultaneous energy harvesting and information transmission. Compared with the existing protocols, the proposed design possesses two main advantages: i) it ensures uninterrupted information transmission since no time switc…
An important challenge of wireless networks is to boost the cell edge performance and enable multi-stream transmissions to cell edge users. Interference mitigation techniques relying on multiple antennas and coordination among cells are nowadays heavily studied in the literature. Typical strategies in OFDMA networks include coordinated scheduling, beamforming and power control. In this paper, we propose a novel and practical type of coordination for OFDMA downlink networks relying on multiple antennas at the transmitter and the receiver. The transmission ranks, i.e.\ the number of transmitted …
Intelligent reflecting surface (IRS) is a promising technology to improve the performance of wireless powered communication networks (WPCNs) due to its capability to reconfigure signal propagation environments via smart reflection. In particular, the high passive beamforming gain promised by IRS can significantly enhance the efficiency of both downlink wireless power transfer (DL WPT) and uplink wireless information transmission (UL WIT) in WPCNs. Although adopting different IRS phase shifts for DL WPT and UL WIT, i.e., dynamic IRS beamforming, is in principle possible but incurs additional si…
Intelligent reflecting surface (IRS) has recently been emerged as an effective way for improving the performance of wireless networks by reconfiguring the propagation environment through a large number of passive reflecting elements. This game-changing technology is especially important for stepping into the Internet of Everything (IoE) era, where high performance is demanded with very limited available resources. In this paper, we study a backscatter-assisted wireless powered communication network (BS-WPCN), in which a number of energy-constrained users, powered by a power station (PS), trans…
This paper considers a wireless powered communication network (WPCN) with group cooperation, where two communication groups cooperate with each other via wireless power transfer and time sharing to fulfill their expected information delivering and achieve "win-win" collaboration. To explore the system performance limits, we formulate optimization problems to respectively maximize the weighted sum-rate and minimize the total consumed power. The time assignment, beamforming vector and power allocation are jointly optimized under available power and quality of service requirement constraints of b…
This paper studies secrecy transmission with the aid of a group of wireless energy harvesting (WEH)-enabled amplify-and-forward (AF) relays performing cooperative jamming (CJ) and relaying. The source node in the network does simultaneous wireless information and power transfer (SWIPT) with each relay employing a power splitting (PS) receiver in the first phase; each relay further divides its harvested power for forwarding the received signal and generating artificial noise (AN) for jamming the eavesdroppers in the second transmission phase. In the centralized case with global channel state in…
This paper studies a wireless powered mobile edge computing (MEC) system with device-to-device (D2D)-enabled task offloading. In this system, a set of distributed multi-antenna energy transmitters (ETs) use collaborative energy beamforming to wirelessly charge multiple users. By using the harvested energy, the actively computing user nodes can offload their computation tasks to nearby idle users (as helper nodes) via D2D communication links for self-sustainable remote computing. We consider the frequency division multiple access (FDMA) protocol, such that the D2D communications of different us…
Previous works on cache-enabled small-cell networks (SCNs) with probabilistic caching often assume that each user is connected to the nearest small base station (SBS) among all that have cached its desired content. The user may, however, suffer strong interference from other SBSs which do not cache the desired content but are geographically closer. In this work, we investigate this issue by deploying multiple antennas at each SBS. We first propose a user-centric SBS clustering model where each user chooses its serving SBS only from a cluster of $K$ nearest SBSs with $K$ being a fixed cluster s…
This paper considers the so-called multiple-input-multiple-output interference channel (MIMO-IC) which has relevance in applications such as multi-cell coordination in cellular networks as well as spectrum sharing in cognitive radio networks among others. We consider a beamforming design framework based on striking a compromise between beamforming gain at the intended receiver (Egoism) and the mitigation of interference created towards other receivers (Altruism). Combining egoistic and altruistic beamforming has been shown previously in several papers to be instrumental to optimizing the rates…
