Raman Response and Transport Properties of One-Dimensional van der Waals Tellurium Nanowires
Jing-Kai Qin, Pai-Ying Liao, Mengwei Si, Shiyuan Gao, Gang Qiu, Jie Jian, Qingxiao Wang, Si-Qi Zhang, Shouyuan Huang, Adam Charnas, Yixiu Wang, Moon J. Kim, Wen… 展开作者
Jing-Kai Qin, Pai-Ying Liao, Mengwei Si, Shiyuan Gao, Gang Qiu, Jie Jian, Qingxiao Wang, Si-Qi Zhang, Shouyuan Huang, Adam Charnas, Yixiu Wang, Moon J. Kim, Wenzhuo Wu, Xianfan Xu, Hai-Yan Wang, Li Yang, Yoke Khin Yap, Peide D. Ye
备注：
45 pages, 23 figures. Nature Electronics, to be published
Tellurium can form nanowires of helical atomic chains. Given their unique one-dimensional van der Waals structure, these nanowires are expected to show remarkably different physical and electronic properties than bulk tellurium. Here we show that few-chain and single-chain van der Waals tellurium nanowires can be isolated using carbon nanotube and boron nitride nanotube encapsulation. With the approach, the number of atomic chains can be controlled by the inner diameter of the nanotube. The Raman response of the structures suggests that the interaction between a single-atomic tellurium chain and a carbon nanotube is weak, and that the inter-chain interaction becomes stronger as the number of chains increases. Compared with bare tellurium nanowires on SiO2, nanowires encapsulated in boron nitride nanotubes exhibit a dramatically enhanced current-carrying capacity, with a current density of 1.5*10^8 A cm-2, which exceeds that of most semiconducting nanowires. We also use our tellurium nanowires encapsulated in boron nitride nanotubes to create field-effect transistors that have a diameter of only 2 nm.
Due to its low bandgap and high optical efficiency, tellurium is considered an important material candidate for mid-infrared applications. Taking advantage of its structural anisotropy, we fabricated tellurium nanowire devices and investigated the radiative interaction of charge carriers by the polarization-resolved photoconductivity spectra under mid-infrared illumination. The intensity of the photoresponse shows sensitive dependence on temperature and could be significantly boosted by positive voltage bias from the back gate.
Experimental demonstrations of 1D van der Waals material tellurium have been presented by Raman spectroscopy under strain and magneto-transport. Raman spectroscopy measurements have been performed under strains along different principle axes. Pronounced strain response along c-axis is observed due to the strong intra-chain covalent bonds, while no strain response is obtained along a-axis due to the weak inter-chain van der Waals interaction. Magneto-transport results further verify its anisotropic property, resulting in dramatically distinct magneto-resistance behaviors in terms of three diffe…
Gate-all-around nanowire transistor, due to its extremely tight electrostatic control and vertical integration capability, is a highly promising candidate for sub-5 nm technology node. In particular, the junctionless nanowire transistors are highly scalable with reduced variability due to avoidance of steep source/drain junction formation by ion implantation. Here we demonstrate a dual-gated junctionless nanowire \emph{p}-type field effect transistor using tellurium nanowire as the channel. The dangling-bond-free surface due to the unique helical crystal structure of the nanowire, coupled with…
We report results of investigation of the low-frequency electronic excess noise in quasi-1D nanowires of TaSe3 capped with quasi-2D h-BN layers. Semi-metallic TaSe3 is a quasi-1D van der Waals material with exceptionally high breakdown current density. It was found that TaSe3 nanowires have lower levels of the normalized noise spectral density, compared to carbon nanotubes and graphene. The temperature-dependent measurements revealed that the low-frequency electronic 1/f noise becomes the 1/f^2-type as temperature increases to about 400 K, suggesting the onset of electromigration (f is the fre…
Nanobelts, nanoribbons and other quasi-one-dimensional nanostructures formed from layered, so-called, van der Waals semiconductors have garnered much attention due to their high-performance, tunable optoelectronic properties. For layered alloys made from the gallium monochalcogenides GaS, GaSe, and GaTe, near-continuous tuning of the energy bandgap across the full composition range has been achieved in GaSe1-xSx and GaSe1-xTex alloys. Gold-catalyzed vapor-liquid-solid (VLS) growth of these alloys yields predominantly nanobelts, nanoribbons and other nanostructures for which the fast crystal gr…
Effects that are not captured by the generalized-gradient density-functional theory play a prominent effect on the structural binding, and on the electronic and optical properties of reduced-dimensional and weakly-bound materials. Here, we report the exfoliation energy of selenium and tellurium atomic chains with non-empirical van der Waals corrections, and their electronic and optical properties with the GW and Bethe-Salpeter formalisms. The exfoliation energy is found to be within 0.547 to 0.719 eV/u.c. for the selenium atomic chain, and 0.737 to 0.926 eV/u.c. for the tellurium atomic chain …
We demonstrate that kinetics play an important role in the epitaxial growth of Fe$_3$GeTe$_2$ (FGT) van der Waals (vdW) ferromagnetic films by molecular beam epitaxy. By varying the deposition rate, we control the formation or suppression of an initial tellurium-deficient non-van der Waals phase (Fe$_3$Ge$_2$) prior to realizing epitaxial growth of the vdW FGT phase. Using cross-sectional scanning transmission electron microscopy and scanning tunneling microscopy, we optimize the FGT films to have atomically smooth surfaces and abrupt interfaces with the Ge(111) substrate. The magnetic propert…
We study the van der Waals interaction of a metallic or narrow-gap semiconducting nanowire with a surface, in the regime of intermediate wire-surface distances $(v_{F}/c)L \ll d \ll L $ or $L \ll d \ll (c/v_{F})L $, where $L$ is the nanowire length, $d$ is the distance to the surface, and $v_{F}$ is the characteristic velocity of nanowire electrons (for a metallic wire, it is the Fermi velocity). Our approach, based on the Luttinger liquid framework, allows one to analyze the dependence of the interaction on the interplay between the nanowire length, wire-surface distance, and characteristic l…
We report results of investigation of the current-carrying capacity of nanowires made from the quasi-1D van der Waals metal tantalum triselenide capped with quasi-2D boron nitride. The chemical vapor transport method followed by chemical and mechanical exfoliation were used to fabricate mm-long TaSe3 wires with lateral dimensions in the 20 to 70 nm range. Electrical measurements establish that TaSe3/h-BN nanowire heterostructures have a breakdown current density exceeding 10 MA/cm2 - an order-of-magnitude higher than that in copper. Some devices exhibited an intriguing step-like breakdown, whi…
Semiconductor nanowires have emerged as versatile components in superconducting hybrid devices for Majorana physics and quantum computing. The transport properties of nanowires can be tuned either by field-effect or doping. We investigated a series of InAs nanowires which conductivity has been modified by n-type doping using tellurium. In addition to electron microscopy studies, the wires were also examined with atomic probe tomography to obtain information about the local incorporation of Te atoms. It was found that the Te atoms mainly accumulate in the core of the nanowire and at the corners…
We report on the temperature evolution of the polarization-dependent Raman spectrum of exfoliated MoI$_3$, a van der Waals material with a "true one-dimensional" crystal structure that can be exfoliated to individual atomic chains. The temperature evolution of several Raman features reveals anomalous behavior suggesting a phase transition of a magnetic origin. Theoretical considerations indicate that MoI$_3$ is an easy-plane antiferromagnet with alternating spins along the dimerized chains and with inter-chain helical spin ordering. The calculated frequencies of the phonons and magnons are con…
Multilayer van der Waals (vdWs) semiconductors have great promising application in high-performance optoelectronic devices. However, the photoconductive photodetectors based on layered semiconductors often suffer from large dark current and high external driven bias voltage. Here, we report a vertical van der Waals heterostructures (vdWHs) consisting of multilayer indium selenide (InSe) and tellurium (Te). The multilayer InSe-Te vdWHs device shows a record high forward rectification ratio greater than 107 at room temperature. Furthermore, an ultrasensitive and broadband photoresponse photodete…
We report on the preparation of flexible polymer composite films with aligned metallic fillers comprised of atomic chain bundles of the quasi-one-dimensional (1D) van der Waals material tantalum triselenide, TaSe3. The material functionality, embedded at the nanoscale level, is achieved by mimicking the design of an electromagnetic aperture grid antenna. The processed composites employ chemically exfoliated TaSe3 nanowires as the grid building blocks incorporated within the thin film. Filler alignment is achieved using the "blade coating" method. Measurements conducted in the X-band frequency …
Potential applications in spintronics and quantum computing have motivated much recent research in epitaxial films of bismuth telluride. This system is also an example of van der Waals (vdW) epitaxy where the interface coherence between film and substrate is based on vdW bonds instead of strong ionic or covalent bonds. Effects of lattice mismatch on electrical properties and film structure are more difficult to control due to the weakness of the vdW forces. Here we present a general x-ray diffraction method to investigate in-plane atomic displacements and lateral lattice coherence length in vd…
We show that the usual sum of $R^{-6}$ contributions from elements separated by distance $R$ can give \emph{qualitatively} wrong results for the electromagnetically non-retarded van der Waals interaction between non-overlapping bodies. This occurs for anisotropic nanostructures that have a zero electronic energy gap, such as nanowires, conducting nanotubes, and nano-layered systems including metals and graphene planes. In all these cases our analytic microscopic calculations give an interaction falling off with a power of separation different from the conventional value. We discuss implication…
The synthesis of new materials with novel or useful properties is one of the most important drivers in the fields of condensed matter physics and materials science. Discoveries of this kind are especially significant when they point to promising future basic research and applications. Van der Waals bonded materials comprised of lower-dimensional building blocks have been shown to exhibit emergent properties when isolated in an atomically thin form1-8. Here, we report the discovery of a transition metal chalcogenide in a heretofore unknown segmented linear chain form, where basic building block…
The authors combine acousto-optoelectric and multi-channel photon correlation spectroscopy to probe spatio-temporal carrier dynamics induced by a piezoelectric surface acoustic wave (SAW). The technique is implemented by combining phase-locked optical micro-photoluminescence spectroscopy and simultaneous three-channel time resolved detection. From the recorded time correlated single photon counting data the time transients of individual channels and the second and third order correlation functions are obtained with sub-nanosecond resolution. The method is validated by probing the correlations …
Atomic-scale helices exist as motifs for several material lattices. We examine a tight-binding model for a single one-dimensional monatomic chain with a p-orbital basis coiled into a helix. A topologically nontrivial phase emerging from this model supports a zero-energy mode localized to a boundary, always embedded within a continuum band, regardless of termination site. We identify a topological invariant for this phase that is related to the number of zero energy end modes by means of the bulk-boundary correspondence, and give strict conditions for the existence of the bound state. Another, …
Chiral Phonons and Giant Anisotropic Photoresponse in Quasi-1D van der Waals Semiconductor ZrSnS3
National Key Laboratory of Spintronics, Hangzhou International Innovation Institute, Beihang University（北京航空航天大学杭州创新研究院）；Department of Physics, Binghamton University-SUNY（宾汉姆顿大学）；University of Warsaw, Faculty of Physics（华沙大学物理系）；School of Materials Science and Engineering, Institutes of Physical Science and Information Technology, Anhui University（安徽大学物质科学与信息技术研究院）；Nanoscale Synthesis & Research Laboratory, Department of Applied Physics, University of Karachi（卡拉奇大学应用物理系纳米合成与研究实验室）
