5G New Radio (NR) Release 15 has been specified in June 2018. It introduces numerous changes and potential improvements for physical layer data transmissions, although only point-to-point (PTP) communications are considered. In order to use physical data channels such as the Physical Downlink Shared Channel (PDSCH), it is essential to guarantee a successful transmission of control information via the Physical Downlink Control Channel (PDCCH). Taking into account these two aspects, in this paper, we first analyze the PDCCH processing chain in NR PTP as well as in the state-of-the-art Long Term Evolution (LTE) point-to-multipoint (PTM) solution, i.e., evolved Multimedia Broadcast Multicast Service (eMBMS). Then, via link level simulations, we compare the performance of the two technologies, observing the Bit/Block Error Rate (BER/BLER) for various scenarios. The objective is to identify the performance gap brought by physical layer changes in NR PDCCH as well as provide insightful guidelines on the control channel configuration towards NR PTM scenarios.
The Discontinuous Reception (DRX) mechanism is commonly employed in current LTE networks to improve energy efficiency of user equipment (UE). DRX allows UEs to monitor the physical downlink control channel (PDCCH) discontinuously when there is no downlink traffic for them, thus reducing their energy consumption. However, DRX power savings are achieved at the expense of some increase in packet delay since downlink traffic transmission must be deferred until the UEs resume listening to the PDCCH. In this paper, we present a promising mechanism that reduces energy consumption of UEs using DRX whi…
New Radio (NR) is a new radio air interface developed by the 3rd Generation Partnership Project (3GPP) for the fifth generation (5G) mobile communications system. With great flexibility, scalability, and efficiency, 5G is expected to address a wide range of use-cases including enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine type communications (mMTC). The physical downlink control channel (PDCCH) in NR carries Downlink Control Information (DCI). Understanding how PDCCH operates is key to developing a good understanding of how information…
5G New Radio (NR) promises to support diverse services such as enhanced mobile broadband (eMBB), ultra-reliable low-latency communication (URLLC), and massive machine-type communication (mMTC). This requires spectrum, most of which is occupied by 4G Long Term Evolution (LTE). Hence, network operators are expected to deploy 5G using the existing LTE infrastructure while migrating to NR. In addition, operators must support legacy LTE devices during the migration, so LTE and NR systems will coexist for the foreseeable future. In this article, we address LTE-NR coexistence starting with a review o…
In this paper, we describe the design and implementation of D2D communication functionality for LTE. To our knowledge, this is the first such implementation that is compliant with the LTE Release 12 standard. In this paper, we design and demonstrate an experiment on mode selection between infrastructure mode and D2D communication mode in LTE networks. We implement our system on a software-defined radio SDR testbed, augmenting the open-source LTE eNodeB and UE implementation provided by the srsLTE software suite. Our measurements demonstrate the cell extension capabilities of D2D and quantify t…
In this paper we investigate several approaches and algorithms that have been proposed in the literature to address the need (allocate resources efficiently), this diversity and multitude of algorithms is related the factors considered for the optimal management of requested radio traffic type resource, specifically the requested QoS by the EU.
This paper focuses on an essential task of the enhanced NodeB eNodeB element in LTE architecture, the Radio Resource Manager RRM, which aims to accept or reject requests for connection to the network based on some constraints and ensuring optimal distribution of radio resources between Users Equipments UEs. Its main functionalities include Admission Control AC and Packet Scheduling PS. This paper will center mainly on the PS part of the RRM task, which performs the radio resource allocation in both uplink and downlink directions. Several approaches and algorithms have been proposed in the lite…
Frequency reuse in cells is one of the strategies that LTE uses to maximize the spectrum efficiency. However, it leads to an interference among the cells, especially at the cell edges where the probability for a cell-edge user to be scheduled on a resource block that is being transmitted by the neighbouring cell is high; consequently, the interference is high. In-order to mitigate Inter-Cell Interference, Inter-Cell Interference Coordination was proposed by the Third Generation Partnership Project 3GPP standards for the LTE network, and later on, the enhanced Inter-Cell Interference Coordinati…
Long Term Evolution (LTE), which has its root on commercial mobile communications, recently becomes an influential solution to future public safety communications. To verify the feasibility of LTE for public safety, it is essential to investigate whether an LTE system optimized for one-to-one communications is capable of providing group communication, which is one of the most important service concepts in public safety. In general, a number of first responders for public safety need to form a group for communicating with each other or sharing the common data for collaboration on their mission.…
This paper presents our methodology and toolbox that allows analyzing the radio access network security of laboratory and commercial 4G and future 5G cellular networks. We leverage a free open-source software suite that implements the LTE UE and eNB enabling real-time signaling using software radio peripherals. We modify the UE software processing stack to act as an LTE packet collection and examination tool. This is possible because of the openness of the 3GPP specifications. Hence, we are able to receive and decode LTE downlink messages for the purpose of analyzing potential security problem…
Machine-to-machine (M2M) communications are expected to provide ubiquitous connectivity between machines without the need of human intervention. To support such a large number of autonomous devices, the M2M system architecture needs to be extremely power and spectrally efficient. This article thus briefly reviews the features of M2M services in the third generation (3G) long-term evolution and its advancement (LTE-Advanced) networks. Architectural enhancements are then presented for supporting M2M services in LTE-Advanced cellular networks. To increase spectral efficiency, the same spectrum is…
In this study, we describe the behavior of LTE over the sea and investigate the problem of radio resource block allocation in such SINR limited maritime channels. For simulations of such sea environment, we considered a network scenario of Bosphorus Strait in Istanbul, Turkey with different number of ships ferrying between two ports at a given time. After exploiting the network characteristics, we formulated and solved the radio resource allocation problem by max-min integer linear programming method. The radio resource allocation fairness in terms of Jain's fairness index was computed and it …
A Heterogeneous Network (HetNet) comprises of multiple Radio Access Technologies (RATs) allowing a user to associate with a specific RAT and steer to other RATs in a seamless manner. To cope up with the unprecedented growth of data traffic, mobile data can be offloaded to Wireless Fidelity (WiFi) in a Long Term Evolution (LTE) based HetNet. In this paper, an optimal RAT selection problem is considered to maximize the total system throughput in an LTE-WiFi system with offload capability. Another formulation is also developed where maximizing the total system throughput is subject to a constrain…
For a base station that supports cellular communications in sub-6 GHz LTE and millimeter (mmWave) bands, we propose a supervised machine learning algorithm to improve the success rate in the handover between the two radio frequencies using sub-6 GHz and mmWave prior channel measurements within a temporal window. The main contributions of our paper are to 1) introduce partially blind handovers, 2) employ machine learning to perform handover success predictions from sub-6 GHz to mmWave frequencies, and 3) show that this machine learning based algorithm combined with partially blind handovers can…
Cellular communications are evolving to facilitate the current and expected increasing needs of Quality of Service (QoS), high data rates and diversity of offered services. Towards this direction, Radio Access Network (RAN) virtualization aims at providing solutions of mapping virtual network elements onto radio resources of the existing physical network. This paper proposes the Resources nEgotiation for NEtwork Virtualization (RENEV) algorithm, suitable for application in Heterogeneous Networks (HetNets) in Long Term Evolution-Advanced (LTE-A) environments, consisting of a macro evolved NodeB…
The first 5G (5th generation wireless systems) New Radio Release-15 was recently completed. However, the specification only considers the use of unicast technologies and the extension to point-to-multipoint (PTM) scenarios is not yet considered. To this end, we first present in this work a technical overview of the state-of-the-art LTE (Long Term Evolution) PTM technology, i.e., eMBMS (evolved Multimedia Broadcast Multicast Services), and investigate the physical layer performance via link-level simulations. Then based on the simulation analysis, we discuss potential improvements for the two c…
Coexistence with Wi-Fi is the key issue for unlicensed band LTE. The main coexistence mechanism is Listen-Before-Talk, whereby radio frequency energy is sensed over a short period of time and compared to a threshold. Given the default energy thresholds, the energy sensing range is actually much less than the cell range. Both technologies can experience collisions due to transmission being below energy detection threshold. Currently Wi-Fi is agnostic of LTE presence in the unlicensed spectrum. To improve coexistence a communications channel via relaying is proposed to be used by the unlicensed …
Compared with the legacy wireless networks, the next generation of wireless network targets at different services with divergent QoS requirements, ranging from bandwidth consuming video service to moderate and low date rate machine type services, and supporting as well as strict latency requirements. One emerging new service is to exploit wireless network to improve the efficiency of vehicular traffic and public safety. However, the stringent packet end-to-end (E2E) latency and ultra-low transmission failure rates pose challenging requirements on the legacy networks. In other words, the next g…
Effective emergency and natural disaster management depend on the efficient mission-critical voice and data communication between first responders and victims. Land Mobile Radio System (LMRS) is a legacy narrowband technology used for critical voice communications with limited use for data applications. Recently Long Term Evolution (LTE) emerged as a broadband communication technology that has a potential to transform the capabilities of public safety technologies by providing broadband, ubiquitous, and mission-critical voice and data support. For example, in the United States, FirstNet is bui…
MmWave communications are expected to play a major role in the Fifth generation of mobile networks. They offer a potential multi-gigabit throughput and an ultra-low radio latency, but at the same time suffer from high isotropic pathloss, and a coverage area much smaller than the one of LTE macrocells. In order to address these issues, highly directional beamforming and a very high-density deployment of mmWave base stations were proposed. This Thesis aims to improve the reliability and performance of the 5G network by studying its tight and seamless integration with the current LTE cellular net…
This paper provides a methodology to study the PHY layer vulnerability of wireless protocols in hostile radio environments. Our approach is based on testing the vulnerabilities of a system by analyzing the individual subsystems. By targeting an individual subsystem or a combination of subsystems at a time, we can infer the weakest part and revise it to improve the overall system performance. We apply our methodology to 4G LTE downlink by considering each control channel as a subsystem. We also develop open-source software enabling research and education using software-defined radios. We presen…
5G network is envisioned to deploy a massive Internet-of-Things (IoTs) with requirements of low-latency, low control overhead and low power. Current 4G network is optimized for large bandwidth applications and inefficient to handle short sporadic IoT messages. The challenge here spans multiple layer including the radio access and the network layer. This paper focus on reusing CDMA access for IoT devices considering event-driven and latency sensitive traffic profile. We propose a PHY/MAC layer design for CDMA based communication for low power IoT devices. We propose and evaluate coexisting oper…
This paper investigates point-to-multipoint (PTM) transmission supporting adaptive modulation and coding (AMC) as well as retransmissions based on incremental redundancy. In contrast to the classical PTM transmission which was introduced by the Multimedia Broadcast Multicast Service (MBMS), the adaptiveness requires user individual feedback channels that allow the receivers to report their radio conditions and send positive or negative acknowledgments (ACK/NACK) for a Layer 1 transport block to the eNodeB. In this work, an adaptive PTM scheme based on feedback from multiple users is presented …
In this paper, we propose to evaluate the performance of channel estimation techniques for Long Term Evolution (LTE) Downlink systems based on Zero Padding technique (ZP) instead of Cyclic Prefixing (CP). LTE Downlink system is a multiuser system based on a MIMO-OFDMA technology. Usually, in OFDM systems, a guard interval is inserted in order to mitigate both inter-carrier interference (ICI) and inter-symbol interference (ISI). LTE Downlink systems are based on CP-OFDM technique which consists of a copy a last OFDM symbols inserted at the beginning of each transmitted OFDM symbol. Although thi…
The Remote-PHY (R-PHY) modular cable network for Data over Cable Service Interface Specification (DOCSIS) service conducts the physical layer processing for the transmissions over the broadcast cable in a remote node. In contrast, the cloud radio access network (CRAN) for Long-Term Evolution (LTE) cellular wireless services conducts all baseband physical layer processing in a central baseband unit and the remaining physical layer processing steps towards radio frequency (RF) transmission in remote nodes. Both DOCSIS and LTE are based on Orthogonal Frequency Division Multiplexing (OFDM) physica…
In this paper, we propose, implement, and test two novel downlink LTE scheduling algorithms. The implementation and testing of these algorithms were in Matlab, and they are based on the use of Reinforcement Learning, more specifically, the Qlearning technique for scheduling two types of users. The first algorithm is called a Collaborative scheduling algorithm, and the second algorithm is called a Competitive scheduling algorithm. The first type of the scheduled users is the Primary Users, and they are the licensed subscribers that pay for their service. The second type of the scheduled users i…
This paper investigates the co-existence of Wi-Fi and LTE in emerging unlicensed frequency bands which are intended to accommodate multiple radio access technologies. Wi-Fi and LTE are the two most prominent access technologies being deployed today, motivating further study of the inter-system interference arising in such shared spectrum scenarios as well as possible techniques for enabling improved co-existence. An analytical model for evaluating the baseline performance of co-existing Wi-Fi and LTE is developed and used to obtain baseline performance measures. The results show that both Wi-F…
Achieving a tighter level of aggregation between LTE and Wi-Fi networks at the radio access network (a.k.a. LTE-Wi-Fi Aggregation or LWA) has become one of the most prominent solutions in the era of 5G to boost network capacity and improve end user's quality of experience. LWA offers flexible resource scheduling decisions for steering user traffic via LTE and Wi-Fi links. In this work, we propose a Collocated LTE/WLAN Radio Level Integration architecture at IP layer (C-LWIP), an enhancement over 3GPP non-collocated LWIP architecture. We have evaluated C-LWIP performance in various link aggrega…
To meet the high demand for mobile data, the Third Generation Partnership Project (3GPP) established a set of standards known as 5G New Radio (5G NR). The architecture of 5G NR includes a flexible radio access network and a core network. 3GPP has also been working on a new radio access technology, called 5G NR Unlicensed (5G NR-U), which aims at extending 5G NR to unlicensed bands. In this paper, we give an overview of the most recent 5G NR-U design elements and discuss potential concerns, including fair coexistence with other unlicensed technologies such as Wi-Fi. We use simulations to study …
NB-IoT is the 3GPP standard for machine-to-machine communications, recently finalized within LTE release 13. This article gives a brief overview about this new LTE-based radio access technology and presents a implementation developed using the srsLTE software radio suite. We also carry out a performance study in which we compare a theoretical analysis with experimental results obtained in our testbed. Furthermore, we provide some interesting details and share our experience in exploring one of the worldwide first commercial NB-IoT deployments.
Reliable network measurements are a fundamental component of networking research as they enable network analysis, system debugging, performance evaluation and optimization. In particular, decoding the LTE control channel would give access to the full base station traffic at a 1 ms granularity, thus allowing for traffic profiling and accurate measurements. Although a few open-source implementations of LTE are available, they do not provide tools to reliably decoding the LTE control channel and, thus, accessing the scheduling information. In this paper, we present OWL, an Online Watcher for LTE …
LTEs uplink (UL) efficiency critically depends on how the interference across different cells is controlled. The unique characteristics of LTEs modulation and UL resource assignment poses considerable challenges in achieving this goal because most LTE deployments have 1:1 frequency re-use, and the uplink interference can vary considerably across successive time slots. In this work, we propose LeAP, a measurement data driven machine learning paradigm for power control to manage up-link interference in LTE. The data driven approach has the inherent advantage that the solution adapts based on net…
Wi-Fi provides cost-effective data capacity at hotspots in conjunction with broadband cellular networks. The hotspots are required to capture a large number of users and provide high data rates. Data rates, over the Wi-Fi interface, are influenced by the media access protocol, which loses throughput due to delays and unintended collisions when a large number of users are active. The hotspot range which determines the number of users, that can associate, is limited by the lower power of the client rather than the access point. By diverting the traffic destined to the access point via another ac…
University of California, Berkeley（加州大学伯克利分校）；University of Michigan（密歇根大学）；Uber Technologies（优步科技）
An increasing amount of analytics is performed on data that is procured in a real-time fashion to make real-time decisions. Such tasks include simple reporting on streams to sophisticated model building. However, the practicality of such analyses are impeded in several domains because they are faced with a fundamental trade-off between data collection latency and analysis accuracy. In this paper, we study this trade-off in the context of a specific domain, Cellular Radio Access Networks (RAN). Our choice of this domain is influenced by its commonalities with several other domains that produce …
With technology and societal development, the 5th generation wireless communication (5G) contributes significantly to different societies like industries or academies. Vehicle-to-Everything (V2X) communication technology has been one of the leading services for 5G which has been applied in vehicles. It is used to exchange their status information with other traffic and traffic participants to increase traffic safety and efficiency. Cellular-V2X (C-V2X) is one of the emerging technologies to enable V2X communications. The first Long-Term Evolution (LTE) based C-V2X was released on the 3rd Gener…
Energy, water, health, transportation and emergency services act as backbones for our society. Aiming at high degrees of efficiency, these systems are increasingly automated, depending on communication systems. However, this makes these Critical Infrastructures (CI) prone to cyber attacks, resulting in data leaks, reduced performance or even total system failure. Beyond a survey of existing vulnerabilities, we provide an experimental evaluation of targeted uplink jamming against LTE's air interface. Primarily, our implementations of smart attacks on the LTE Physical Uplink Control Channel (PUC…
To receive the highest possible data rate or/and the most reliable connection, the User Equipment (UE) may want to choose between different networks. However, current LTE and LTE-Advanced mobile networks do not supply the UE with an explicit indicator about the currently achievable data rate. For this reason, the mobile device will only see what it obtains from the network once it actively sends data. A passive estimation in advance is therefore not doable without further effort. Although the device can identify its current radio conditions based on the received signal strength and quality, it…
Relaying is a promising enhancement to current radio access networks. Relay enhanced LTE-Advanced networks are expected to fulfill the demanding coverage and capacity requirements in a cost-efficient way. However, due to low transmit power, the coverage areas of the relay nodes will be small. Therefore, the performance of relay deployments may be limited by load imbalances. In this study, we present a practical solution for this problem by introducing a bias to cell selection and handover decisions along with a reduction in eNB transmit power. This method results in an extension of the relay c…
The long-Term Evolution (LTE) of the 3GPP (3rd Generation Partnership Project) radio access network is in early stage of specification. Self-tuning and self-optimisation algorithms are currently studied with the aim of enriching the LTE standard. This paper investigates auto-tuning of LTE mobility algorithm. The auto-tuning is carried out by adapting handover parameters of each base station according to its radio load and the load of its adjacent cells. The auto-tuning alleviates cell congestion and balances the traffic and the load between cells by handing off mobiles close to the cell border…
5G New Radio (NR) is an emerging radio access technology, which is planned to succeed 4G Long Term Evolution (LTE) as global standard of cellular communications in the upcoming years. This paper considers a digital signal processing model and a software implementation of a complete transceiver chain of the Physical Uplink Shared Channel (PUSCH) defined by the version 15 of the 3GPP standard, consisting of both baseband transmitter and receiver chains on a physical layer level. The BLER performance of the prototype system implementation under AWGN and Rayleigh fading channel conditions is evalu…
Mobile networks of the future are predicted to be much denser than today's networks in order to cater to increasing user demands. In this context, cloud based radio access networks have garnered significant interest as a cost effective solution to the problem of coping with denser networks and providing higher data rates. However, to the best knowledge of the authors, a quantitative analysis of the cost of such networks is yet to be undertaken. This paper develops a theoretic framework that enables computation of the deployment cost of a network (modeled using various spatial point processes) …
Massive machine type communications (mMTC) is one of the cornerstone services that have to be supported by 5G systems. 3GPP has already introduced LTE-M and NB-IoT, often referred to as cellular IoT, in 3GPP Releases 13, 14, and 15 and submitted these technologies as part of 3GPP IMT-2020 (i.e., 5G) technology submission to ITU-R. Even though NB-IoT and LTE-M have shown to satisfy 5G mMTC requirements defined by ITU-R, it is expected that these cellular IoT solutions will not address all aspects of IoT and ongoing digitalization, including the support for direct communication between "things" …
The fifth-generation (5G) communication systems will enable enhanced mobile broadband, ultra-reliable low latency, and massive connectivity services. The broadband and low-latency services are indispensable to public safety (PS) communication during natural or man-made disasters. Recently, the third generation partnership project long term evolution (3GPPLTE) has emerged as a promising candidate to enable broadband PS communications. In this article, first we present six major PS-LTE enabling services and the current status of PS-LTE in 3GPP releases. Then, we discuss the spectrum bands alloca…
In order to keep up with the increasing demands for capacity, cellular networks are becoming increasingly dense and heterogeneous. Dense deployments are expected to provide a linear capacity scaling with the number of small cells deployed due to spatial reuse gains. However in practice network capacity is severely limited in dense networks due to interference. The primary reason is that the current LTE control plane deployment model has very high latency and is unable to cope with the demand of implementing interference management techniques that require coordination on a millisecond timeframe…
Mobile Networks today comprise of multiple Radio Access Technologies (RATs), e.g., 4G LTE, Wireless Local Area Network (WLAN), and the upcoming 5G-New Radio (5G-NR). The access networks of these RATs are controlled by RAT-specific entities, e.g., the resource management function located inside an individual LTE eNB is used for the eNB control, or access controllers are used for controlling WLAN Access Points. Even in the 3GPP's 5G architecture, which has a common Core supporting multiple RATs, radio access related decisions are taken independently within individual RATs. Due to the fragmented …
In December 2017, the Third Generation Partnership Project (3GPP) released the first set of specifications for 5G New Radio (NR), which is currently the most widely accepted 5G cellular standard. 5G NR is expected to replace LTE and previous generations of cellular technology over the next several years, providing higher throughput, lower latency, and a host of new features. Similar to LTE, the 5G NR physical layer consists of several physical channels and signals, most of which are vital to the operation of the network. Unfortunately, like for any wireless technology, disruption through radio…
In 5G non-standalone mode, traffic steering is a critical technique to take full advantage of 5G new radio while optimizing dual connectivity of 5G and LTE networks in multiple radio access technology (RAT). An intelligent traffic steering mechanism can play an important role to maintain seamless user experience by choosing appropriate RAT (5G or LTE) dynamically for a specific user traffic flow with certain QoS requirements. In this paper, we propose a novel traffic steering mechanism based on Deep Q-learning that can automate traffic steering decisions in a dynamic environment having multipl…
Device-to-device (D2D) communication in cellular networks allows direct transmission between two cellular devices with local communication needs. Due to the increasing number of autonomous heterogeneous devices in future mobile networks, an efficient resource allocation scheme is required to maximize network throughput and achieve higher spectral efficiency. In this paper, performance of network-integrated D2D communication under channel uncertainties is investigated where D2D traffic is carried through relay nodes. Considering a multi-user and multi-relay network, we propose a robust distribu…
Voice over Long-Term Evolution (VoLTE) has been witnessing a rapid deployment by network carriers worldwide. During the phases of VoLTE deployments, carriers would typically face challenges in understanding the factors affecting the VoLTE performance and then optimizing it to meet or exceed the performance of the legacy circuit switched (CS) network (i.e., 2G/3G). The main challenge of VoLTE service quality is the LTE network optimization and the performance aspects of the service in different LTE deployment scenarios. In this paper, we present a detailed practical performance analysis of VoLT…
In this paper, we present a framework for resource allocations for multicast device-to-device (D2D) communications underlaying a cellular network. The objective is to maximize the sum throughput of active cellular users (CUs) and feasible D2D groups in a cell, while meeting a certain signal-to-interferenceplus- noise ratio (SINR) constraint for both the CUs and D2D groups. We formulate the problem of power and channel allocation as a mixed integer nonlinear programming (MINLP) problem where one D2D group can reuse the channels of multiple CUs and the channel of each CU can be reused by multipl…
Device-to-device (D2D) communication integrated into cellular networks is a means to take advantage of the proximity of devices and allow for reusing cellular resources and thereby to increase the user bitrates and the system capacity. However, when D2D (in the 3rd Generation Partnership Project also called Long Term Evolution (LTE) Direct) communication in cellular spectrum is supported, there is a need to revisit and modify the existing radio resource management (RRM) and power control (PC) techniques to realize the potential of the proximity and reuse gains and to limit the interference at …
Today's radio access networks (RANs) are monolithic entities which often operate statically on a given set of parameters for the entirety of their operations. To implement realistic and effective spectrum sharing policies, RANs will need to seamlessly and intelligently change their operational parameters. In stark contrast with existing paradigms, the new O-RAN architectures for 5G-and-beyond networks (NextG) separate the logic that controls the RAN from its hardware substrate, allowing unprecedented real-time fine-grained control of RAN components. In this context, we propose the Channel-Awar…
The explosive demand for data has called for solution approaches that range from spectrally agile cognitive radios with novel spectrum sharing, to use of higher frequency spectrum as well as smaller and denser cell deployments with diverse access technologies, referred to as heterogeneous networks (HetNets). Simultaneously, advances in electronics and storage, has led to the advent of wireless devices equipped with multiple radio interfaces (e.g. WiFi, WiMAX, LTE, etc.) and the ability to store and efficiently process large amounts of data. Motivated by the convergence of HetNets and multi-pla…
The Third Generation Partnership Project (3GPP) has standardized Coverage Enhancement (CE) for Internet-of-Things (IoT) to connect devices in challenging radio conditions with cellular networks. CE is based on the principle of prolonged transmission time that exploits the fact that many IoT applications have relaxed requirements on data rate and latency, and the coverage can be significantly boosted by repeating transmissions for such applications. However, CE consumes a lot of radio resources and should be implemented carefully for different applications. This paper presents an end-to-end con…
In a centralized or cloud radio access network, certain portions of the digital baseband processing of a group of several radio access points are executed at a central data center. Centralizing the processing improves the flexibility, scalability, and utilization of computational assets. However, the performance depends critically on how the limited data processing resources are allocated to serve the needs of the different wireless devices. As the processing load imposed by each device depends on its allocated transmission rate and channel quality, the rate-allocation aspect of the scheduling…
