This paper investigates point-to-multipoint (PTM) transmission supporting adaptive modulation and coding (AMC) as well as retransmissions based on incremental redundancy. In contrast to the classical PTM transmission which was introduced by the Multimedia Broadcast Multicast Service (MBMS), the adaptiveness requires user individual feedback channels that allow the receivers to report their radio conditions and send positive or negative acknowledgments (ACK/NACK) for a Layer 1 transport block to the eNodeB. In this work, an adaptive PTM scheme based on feedback from multiple users is presented and evaluated. Furthermore, a simple NACK-oriented feedback mechanism is introduced to relieve the feedback channel that is used in the uplink. Finally, the performance of different single-cell MBMS transmission modes is evaluated by dynamic radio network simulations. It is shown that adaptive PTM transmission outperforms the conventional MBMS configurations in terms of radio resource consumption and user satisfaction rate.
In the near future, the delivery of multimedia multicast services over next-generation networks is likely to become one of the main pillars of future cellular networks. In this extended abstract, we address the issue of efficiently multicasting layered video services by defining a novel optimization paradigm that is based on an Unequal Error Protection implementation of Random Linear Network Coding, and aims to ensure target service coverages by using a limited amount of radio resources.
The advent of multipoint (multicast-based) applications and the growth and complexity of the Internet has complicated network protocol design and evaluation. In this paper, we present a method for automatic synthesis of worst and best case scenarios for multipoint protocol performance evaluation. Our method uses a fault-oriented test generation (FOTG) algorithm for searching the protocol and system state space to synthesize these scenarios. The algorithm is based on a global finite state machine (FSM) model. We extend the algorithm with timing semantics to handle end-to-end delays and address …
Multipoint capabilities are essential for ATM networks to efficiently support many applications, including IP multicasting and overlay applications. The current signaling and routing specifications for ATM define point-to-multipoint capabilities. Multipoint-to-point connection support is also being discussed by the signaling and PNNI groups, and will be defined in the near future for the unspecified bit rate (UBR) service. We examine point-to-multipoint and multipoint-to-point flow control for the available bit rate (ABR) service, as discussed in the traffic management working group.
In this paper, we present a new methodology for developing systematic and automatic test generation algorithms for multipoint protocols. These algorithms attempt to synthesize network topologies and sequences of events that stress the protocol's correctness or performance. This problem can be viewed as a domain-specific search problem that suffers from the state space explosion problem. One goal of this work is to circumvent the state space explosion problem utilizing knowledge of network and fault modeling, and multipoint protocols. The two approaches investigated in this study are based on f…
In this paper an innovative Radio Resource Management (RRM) algorithm is proposed with the purpose of increasing High Speed Packet Access (HSPA) performances, in terms of system capacity and service quality, when the Multimedia Broadcast Multicast Services (MBMS) is supplied. The proposed RRM algorithm exploits channel quality indications to set up point-to-multipoint connections to subgroups of multicast users and to select the proper modulation and coding schemes on the downlink. The number of subgroups is determined through an optimization technique that also takes into account the user sat…
To date, group-oriented communications have been mainly exploited for delivering multimedia services in human-oriented communications while, in future fifth generation (5G) cellular networks, objects will be the main target. Internet of Things (IoT) will undoubtedly play a key role in 5G networks, wherein massive machine-type communications (mMTC) feature a use case as crucial as challenging since cellular IoT connections are predicted to grow heavily in the next future. To boost capacity and energy efficiency, the 5G network can leverage device-to-device (D2D) communications which are recogni…
In multipoint-to-point connections, the traffic at the root (destination) is the combination of all traffic originating at the leaves. A crucial concern in the case of multiple senders is how to define fairness within a multicast group and among groups and point-to-point connections. Fairness definition can be complicated since the multipoint connection can have the same identifier (VPI/VCI) on each link, and senders might not be distinguishable in this case. Many rate allocation algorithms implicitly assume that there is only one sender in each VC, which does not hold for multipoint-to-point …
WiFi multicast to very large groups has gained attention as a solution for multimedia delivery in crowded areas. Yet, most recently proposed schemes do not provide performance guarantees and none have been tested at scale. To address the issue of providing high multicast throughput with performance guarantees, we present the design and experimental evaluation of the Multicast Dynamic Rate Adaptation (MuDRA) algorithm. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications. MuDRA relies on feedback from some nodes collected via a light…
The explosive growth of content-on-the-move, such as video streaming to mobile devices, has propelled research on multimedia broadcast and multicast schemes. Multi-rate transmission strategies have been proposed as a means of delivering layered services to users experiencing different downlink channel conditions. In this paper, we consider Point-to-Multipoint layered service delivery across a generic cellular system and improve it by applying different random linear network coding approaches. We derive packet error probability expressions and use them as performance metrics in the formulation …
ABR traffic management for point-to-multipoint connections controls the source rate to the minimum rate supported by all the branches of the multicast tree. A number of algorithms have been developed for extending ABR congestion avoidance algorithms to perform feedback consolidation at the branch points. This paper discusses various design options and implementation alternatives for the consolidation algorithms, and proposes a number of new algorithms. The performance of the proposed algorithms and the previous algorithms is compared under a variety of conditions. Results indicate that the alg…
Emerging mobility standards within the next generation Internet Protocol, IPv6, promise to continuously operate devices roaming between IP networks. Associated with the paradigm of ubiquitous computing and communication, network technology is on the spot to deliver voice and videoconferencing as a standard internet solution. However, current roaming procedures are too slow, to remain seamless for real-time applications. Multicast mobility still waits for a convincing design. This paper investigates the temporal behaviour of mobile IPv6 with dedicated focus on topological impacts. Extending the…
Le standard IEEE 802.11 est inefficace pour la transmission multimédia en multipoint. En particulier, les paquets multipoints sont envoyés en boucle ouverte de la même manière que les paquets broadcast. L'absence d'acquittements rend impossible la mise en oeuvre de mécanismes de contrôle de congestion, de mécanisme de fiabilisation de la transmission ainsi que d'algorithmes d'adaptation du débit de transmission physique. Dans ce rapport, nous proposons de nouveaux mécanismes de ransmission multipoint qui se basent sur une approche leader pour renvoyer des acquittements. Nous nous interessons à…
The first 5G (5th generation wireless systems) New Radio Release-15 was recently completed. However, the specification only considers the use of unicast technologies and the extension to point-to-multipoint (PTM) scenarios is not yet considered. To this end, we first present in this work a technical overview of the state-of-the-art LTE (Long Term Evolution) PTM technology, i.e., eMBMS (evolved Multimedia Broadcast Multicast Services), and investigate the physical layer performance via link-level simulations. Then based on the simulation analysis, we discuss potential improvements for the two c…
Point-to-multipoint communications are expected to play a pivotal role in next-generation networks. This paper refers to a cellular system transmitting layered multicast services to a multicast group of users. Reliability of communications is ensured via different Random Linear Network Coding (RLNC) techniques. We deal with a fundamental problem: the computational complexity of the RLNC decoder. The higher the number of decoding operations is, the more the user's computational overhead grows and, consequently, the faster the battery of mobile devices drains. By referring to several sparse RLNC…
Multimedia traffic is predicted to account for 82% of the total data traffic by the year 2020. With the increasing popularity of video streaming applications like YouTube, Netflix, Amazon Prime Video, popular video content is often required to be delivered to a large number of users simultaneously. Multicast transmission can be used for catering to such applications efficiently. The common content can be transmitted to the users on the same resources resulting in considerable resource conservation. This paper proposes various schemes for efficient grouping and resource allocation for multicast…
Network architectures that can efficiently transport high quality, multicast video are rapidly becoming a basic requirement of emerging multimedia applications. The main problem complicating multicast video transport is variation in network bandwidth constraints. An attractive solution to this problem is to use an adaptive, multi-layered video encoding mechanism. In this paper, we consider two such mechanisms for the support of video multicast; one is a rate-based mechanism that relies on explicit rate congestion feedback from the network, and the other is a credit-based mechanism that relies …
In this paper, we investigate the performance of LTE Multicast-Broadcast Single-Frequency Networks (MBSFN). LTE-MBSFN is viewed as one of the most promising candidates for vehicular communications which can enhance reliability of vehicular application traffic. This is achieved due to the possibility to efficiently support message exchange in-between vehicles by multicasting information to several vehicles in parallel (point-to-multipoint transmission) employing an Multimedia Broadcast/Multicast Service (MBMS). We investigate two metrics to gauge the performance of MBMS/MBSFN transmissions in c…
Unlike wired networks, the capacity of a wireless network is interference limited due to the broadcast nature of wireless medium. Some multicast wireless network protocols do not consider channel assignment issue, that they cause interference at transmission nodes, hence do not use full capacity of the network. Interference can be reduced and throughput improved with the use of multichannel features. Therefore, this paper used orthogonal channels for sending and receiving nodes in the network. We propose EWM (Efficient Wireless Multicast) method that is distributed scheme for constructing mult…
LTE evolved Multimedia Broadcast/Multicast Service (eMBMS) is an attractive solution for video delivery to very large groups in crowded venues. However, deployment and management of eMBMS systems is challenging, due to the lack of realtime feedback from the User Equipment (UEs). Therefore, we present the Dynamic Monitoring (DyMo) system for low-overhead feedback collection. DyMo leverages eMBMS for broadcasting Stochastic Group Instructions to all UEs. These instructions indicate the reporting rates as a function of the observed Quality of Service (QoS). This simple feedback mechanism collects…
Graph Neural Network-Based Multicast Routing for On-Demand Streaming Services in 6G Networks
School of Telecommunications Engineering, Xidian University（西安电子科技大学电信工程学院）；Division of Integrative Systems and Design, The Hong Kong University of Science and Technology（香港科学与技术大学整合系统与设计系）；School of Electronic and Information Engineering, Beijing Jiaotong University（北京交通大学电子与信息工程学院）；Department of Electrical and Computer Engineering, University of Waterloo（滑铁卢大学电气与计算机工程系）
The 3rd Generation Partnership Project (3GPP) has defined based on the Long Term Evolution (LTE) enhanced Multicast Broadcast Multimedia Service (eMBMS) a set of new features to support the distribution of Terrestrial Broadcast services in Release 14. On the other hand, a new 5th Generation (5G) system architecture and radio access technology, 5G New Radio (NR), are being standardised from Release 15 onwards, which so far have only focused on unicast connectivity. This may change in Release 17 given a new Work Item set to specify basic Radio Access Network (RAN) functionalities for the provisi…
5G New Radio (NR) Release 15 has been specified in June 2018. It introduces numerous changes and potential improvements for physical layer data transmissions, although only point-to-point (PTP) communications are considered. In order to use physical data channels such as the Physical Downlink Shared Channel (PDSCH), it is essential to guarantee a successful transmission of control information via the Physical Downlink Control Channel (PDCCH). Taking into account these two aspects, in this paper, we first analyze the PDCCH processing chain in NR PTP as well as in the state-of-the-art Long Term …
Long Term Evolution-Advanced (LTE-A) and the evolved Multimedia Broadcast Multicast System (eMBMS) are the most promising technologies for the delivery of highly bandwidth demanding applications. In this paper we propose a green resource allocation strategy for the delivery of layered video streams to users with different propagation conditions. The goal of the proposed model is to minimize the user energy consumption. That goal is achieved by minimizing the time required by each user to receive the broadcast data via an efficient power transmission allocation model. A key point in our system …
To satisfy the increasing demand for multimedia services in broadband Internet networks, the WiMAX (Worldwide Interoperability for Microwave Acces) technology has emerged as an alternative to the wired broadband access solutions. It provides an Internet connection to broadband coverage area of several kilometers in radius by ensuring a satisfactory quality of service (QoS), it's an adequate response to some rural or inaccessible areas. Unlike DSL (Digital Subscriber Line) or other wired technology, WiMAX uses radio waves and can provide point-to-multipoint (PMP) and point-to-point (P2P) modes.…
Forthcoming 5G New Radio (NR) systems will be asked to handle a huge number of devices accessing or delivering "resource-hungry" and high-quality services. In view of this, the new 5G Radio Access Technology (RAT) aims to support, in next releases, Multimedia Broadcast/Multicast Service Single Frequency Network (MBSFN) to enable the simultaneous delivery of the same content to a set of users covered by different cells. According to MBSFN, all cells belonging to the same MBSFN Area are synchronized in time and the MBSFN transmission occurs over the same radio resources. In such a way, the same …
