Topological photonics provides an ideal platform for demonstrating novel band topology concepts, which are also promising for robust waveguiding, communication and computation applications. However, many challenges such as extremely large device footprint and functionality at short wavelengths remain to be solved which are required to make practical and useful devices that can also couple to electronic excitations in many important organic and inorganic semiconductors. In this letter, we report an experimental realization of Z_2 photonic topological insulators with their topological edge state energies spanning across the visible wavelength range including in the sub-500 nm regime. The photonic structures are based on deformed hexagonal lattices with preserved six-fold rotational symmetry patterned on suspended SiNx membranes. The experimentally measured energy-momentum dispersion of the topological lattices directly show topological band inversion by the swapping of the brightness of the bulk energy bands, and also the helical edge states when the measurement is taken near the topological interface. The robust topological transport of the helical edge modes in real space is demonstrated by successfully guiding circularly polarized light beams unidirectionally through sharp kinks without major signal loss. This work paves the way for small footprint photonic topological devices working in the short wavelength range that can also be utilized to couple to excitons for unconventional light-matter interactions at the nanoscale.
Optical control of electronic properties is essential for future electric devices. Manipulating such properties has been limited to the microscale in spatial volume due to the wave nature of light; however, scaling down the volume is in extremely high demand. In this study, we demonstrate optical switching within a nanometric spatial volume in an organic electric material. Photochromic materials such as diarylethene derivatives exhibit semiconducting and insulating properties on ultraviolet (UV) and visible light, respectively, which are promising for optical switching and memory. To control t…
Surface nanoscale axial photonics (SNAP) structures are fabricated with a femtosecond laser for the first time. The inscriptions introduced by the laser pressurize the fiber and cause its nanoscale effective radius variation. We demonstrate the subangstrom precise fabrication of individual and coupled SNAP microresonators having the effective radius variation of several nanometers. Our results pave the way to a novel ultraprecise SNAP fabrication technology based on the femtosecond laser inscription.
Flash memory technology is widely common in modern microelectronics, and is essentially affecting our daily life. Considering the recent progress in photonic circuitry, and in particular silicon photonics circuitry, there is now an opportunity to embed the flash memory technology in photonic applications. A particularly promising candidate that can benefit from such integration is the photonic resonator. As of today, chip scale resonators are essential building blocks in modern silicon photonic platform. However, their properties, and in particular their resonance frequencies deviate from thei…
Recently introduced Surface Nanoscale Axial Photonics (SNAP) makes it possible to fabricate high Q-factor microresonators and other photonic microdevices by dramatically small deformation of the optical fiber surface. To become a practical and robust technology, the SNAP platform requires methods enabling reproducible modification of the optical fiber radius at nanoscale. In this Letter, we demonstrate super-accurate fabrication of high Q-factor microresonators by nanoscale modification of the optical fiber radius and refractive index using the CO2 laser and the UV excimer laser beam exposures…
We experimentally demonstrate series of identical two, three, and five coupled high Q-factor Surface Nanoscale Axial Photonics (SNAP) microresonators formed by periodic nanoscale variation of the optical fiber radius. These microresonators are fabricated with a 100 \mum period along an 18 \mum radius optical fiber. The axial FWHM of these microresonators is 80 \mum and their Q-factor exceeds 107. In addition, we demonstrate a SNAP microresonator with the axial FWHM as small as 30 \mum and the axial FWHM of the fundamental mode as small as 10 \mum. These results may potentially enable the dense…
Because of surface structural constraint and thermal management requirement, visible - infrared compatible camouflage is still a great challenge. In this study, we introduce a 2D periodic aperture array into ZnO/Ag/ZnO film to realize visible-infrared compatible camouflage with a performance of thermal management by utilizing the extraordinary optical transmission in a dielectric/metal/dielectric (D/M/D) structure. Because of the high visible transmittance of the D/M/D structure, when applied on a visible camouflage coating, the beneath coating can be observed, realizing arbitrary visible camo…
Integrated photonics is a powerful platform that can improve the performance and stability of optical systems, while providing low-cost, small-footprint and scalable alternatives to implementations based on free-space optics. While great progress has been made on the development of low-loss integrated photonics platforms at telecom wavelengths, visible wavelength range has received less attention. Yet, many applications utilize visible or near-visible light, including those in optical imaging, optogenetics, and quantum science and technology. Here we demonstrate an ultra-low loss integrated vi…
Light strongly interacts with structures that are of a similar scale to its wavelength; typically nanoscale features for light in the visible spectrum. However, the optical response of these nanostructures is usually fixed during the fabrication. Phase change materials offer a way to tune the properties of these structures in nanoseconds. Until now, phase change active photonics use materials that strongly absorb visible light, which limits their application in the visible spectrum. In contrast, Stibnite (Sb2S3) is an under-explored phase change material with a band gap that can be tuned in th…
Over the past decade, remarkable advances have been realized in chip-based nonlinear photonic devices for classical and quantum applications in the near- and mid-infrared regimes. However, few demonstrations have been realized in the visible and near-visible regimes, primarily due to the large normal material group-velocity dispersion (GVD) that makes it challenging to phase match third-order parametric processes. In this paper, we show that exploiting dispersion engineering of higher-order waveguide modes provides waveguide dispersion that allows for small or anomalous GVD in the visible and …
While grating couplers have become the de-facto standard for optical access to integrated silicon photonics platforms, their performance at visible wavelengths, in moderate index contrast platforms like silicon nitride, leaves significant room for improvement. In particular, the index contrast governs the diffraction efficiency per grating tooth and the resulting overall coupler length. In this work, we develop two approaches to address this problem: a dielectric grating that sums multiple optical modes to increase the overall output intensity, and an embedded metal grating that enhances the a…
Visible-wavelength very large-scale integration (VLSI) photonic circuits have potential to play important roles in quantum information and sensing technologies. The realization of scalable, high-speed, and low-loss photonic mesh circuits depends on reliable and well-engineered visible photonic components. Here we report a low-voltage optical phase shifter based on piezo-actuated mechanical cantilevers, fabricated on a CMOS compatible, 200 mm wafer-based visible photonics platform. We show linear phase and amplitude modulation with 6 V$_π$-cm in differential operation, -1.5 dB to -2 dB insertio…
Visible and near-infrared spectrum photonic integrated circuits are quickly becoming a key technology to address the scaling challenges in quantum information and biosensing. Thus far, integrated photonic platforms in this spectral range have lacked integrated photodetectors. Here, we report the first silicon nitride-on-silicon waveguide photodetectors that are monolithically integrated in a visible light photonic platform on silicon. Owing to a leaky-wave silicon nitride-on-silicon design, the devices achieved a high external quantum efficiency of > 60% across a record wavelength span from $λ…
Visible wavelengths of light control the quantum matter of atoms and molecules and are foundational for quantum technologies, including computers, sensors, and clocks. The development of visible integrated photonics opens the possibility for scalable circuits with complex functionalities, advancing both the scientific and technological frontiers. We experimentally demonstrate an inverse design approach based on superposition of guided-mode sources, allowing the generation and full control of free-space radiation directly from within a single 150 nm layer Ta2O5, showing low loss across visible …
Dense photonic integration promises to revolutionize optical computing and communications. However, efforts towards this goal face unacceptable attenuation of light caused by surface roughness in microscopic devices. Here we address this problem by introducing Surface Nanoscale Axial Photonics (SNAP). The SNAP platform is based on whispering gallery modes circulating around the optical fiber surface and undergoing slow axial propagation readily described by the one-dimensional Schrödinger equation. These modes can be steered with dramatically small nanoscale variation of the fiber radius, whic…
Classical electromagnetic boundary conditions (EMBCs) fail to describe quantum interface phenomena at nanoscale. Here, we construct the interface model with a transition layer describing the electromagnetic field inhomogeneity across the interface. Generalized nanoscale EMBCs are derived by introducing the magnetic interfacial response functions (IRFs) and are rewritten as three different forms based on Maxwell's equations in first order approximation. The corresponding Fresnel formula are further used to analyze the interfacial photonic phenomenon, demonstrating interesting behaviors of Brews…
Optical dielectric resonances have the ability to modulate optical energy, and by coupling multiple resonators into photonic molecules, new opportunities emerge in spectral engineering. Using electron-beam spectroscopy, in a 300-keV scanning transmission electron microscope, we probe optical modes of photonic molecules at the nanometer scale. Monochromated electron energy-loss spectra of 400nm-silica-sphere monomers, dimers and trimers display series of sharp peaks in the ultraviolet region. For monomers, the peaks are assigned to low angular number optical whispering gallery modes. For dimers…
Three-dimensional (3D) artificial metacrystals host rich topological phases, such as Weyl points, nodal rings and 3D photonic topological insulators. These topological states enable a wide range of applications, including 3D robust waveguide, one-way fiber and negative refraction of surface wave. However, these carefully designed metacrystals are usually very complex, hindering their extension to nanoscale photonic systems. Here, we theoretically proposed and experimentally realized an ideal nodal ring in visible region using a simple 1D photonic crystal. The pi Berry phase around the ring is …
Engineering the dispersion of light in a metasurface allows for controlling the light-matter interaction strength between light confined in the metasurface and materials placed within its near-field. Specifically, engineering a flatband dispersion increases the photonic density of states thereby enhancing the light-matter interaction. Here, we experimentally demonstrate a metasurface with a flat dispersion at visible wavelengths. We designed and fabricated a suspended one-dimensional gallium phosphide metasurface and measured the photonic band structure via energy-momentum spectroscopy, observ…
Deterministically integrating single solid-state quantum emitters with photonic nanostructures serves as a key enabling resource in the context of photonic quantum technology. Due to the random spatial location of many widely-used solid-state quantum emitters, a number of positoning approaches for locating the quantum emitters before nanofabrication have been explored in the last decade. Here, we review the working principles of several nanoscale positioning methods and the most recent progress in this field, covering techniques including atomic force microscopy, scanning electron microscopy, …
Recent advances in photonic integrated circuits (PICs) have enabled a new generation of "programmable many-mode interferometers" (PMMIs) realized by cascaded Mach Zehnder Interferometers (MZIs) capable of universal linear-optical transformations on N input-output optical modes. PMMIs serve critical functions in photonic quantum information processing, quantum-enhanced sensor networks, machine learning and other applications. However, PMMI implementations reported to date rely on thermo-optic phase shifters, which limit applications due to slow response times and high power consumption. Here, w…
Plasmonic waveguides are key elements in nanophotonic devices serving as optical interconnects between nanoscale light sources and detectors. Multimode operation in plasmonic two-wire transmission lines promises important degrees of freedom for near-field manipulation and information encoding. However, highly confined plasmon propagation in gold nanostructures is typically limited to the near-infrared region due to ohmic losses, excluding all visible quantum emitters from plasmonic circuitry. Here, we report on top-down fabrication of complex plasmonic nanostructures in single-crystalline silv…
Photonic crystal nanocavities at visible wavelengths are fabricated in a high refractive index (n>3.2) gallium phosphide membrane. The cavities are probed via a cross-polarized reflectivity measurement and show resonances at wavelengths as low as 645 nm at room temperature, with quality factors between 500 and 1700 for modes with volumes 0.7(lambda/n)^3. These structures could be employed for submicron scale optoelectronic devices in the visible, and for coupling to novel emitters with resonances in the visible such as nitrogen vacancy centers, and bio- and organic molecules.
Relativistic electrons in a structured medium generate radiative losses such as Cherenkov and transition radiation that act as a virtual light source, coupling to the photonic densities of states. The effect is most pronounced when the imaginary part of the dielectric function is zero, a regime where in a non-retarded treatment no loss or coupling can occur. Maps of the resultant energy losses as a sub-5nm electron probe scans across finite waveguide structures reveal spatial distributions of optical modes in a spectral domain ranging from near-infrared to far ultraviolet.
In this paper we study thermo-optical effects in gallium phosphite photonic crystal cavities in the visible. By measuring the shift of narrow resonances we derive the temperature dependency of the local refractive index of gallium phosphide in attoliter volumina over a temperature range between 5 K and 300 K at a wavelength of about 605 nm. Additionally, the potential of photonic crystal cavities for thermo-optical switching of visible light is investigated. As an example we demonstrate thermo-optical switching with 13 dB contrast.
Nanophotonics has been an active research field over the past two decades, triggered by the rising interests in exploring new physics and technologies with light at the nanoscale. As the demands of performance and integration level keep increasing, the design and optimization of nanophotonic devices become computationally expensive and time-inefficient. Advanced computational methods and artificial intelligence, especially its subfield of machine learning, have led to revolutionary development in many applications, such as web searches, computer vision, and speech/image recognition. The comple…
We demonstrate waveguide-coupled titanium dioxide (TiO2) racetrack resonators with loaded quality factors of 2x10^4 for the visible wavelengths. The structures were fabricated in sputtered TiO2 thin films on oxidized silicon substrates using standard top-down nanofabrication techniques, and passively probed in transmission measurements using a tunable red laser. Devices based on this material could serve as integrated optical elements as well as passive platforms for coupling to visible quantum emitters.
We demonstrate wideband integrated photonic circuits in sputter-deposited aluminum nitride (AlN) thin films. At both near-infrared and visible wavelengths, we achieve low propagation loss in integrated waveguides and realize high-quality optical resonators. In the telecoms C-band (1520-1580 nm), we obtain the highest optical Q factor of 440,000. Critical coupled devices show extinction ratio above 30 dB. For visible wavelengths (around 770 nm), intrinsic quality factors in excess of 30,000 is demonstrated. Our work illustrates the potential of AlN as a low loss material for wideband optical ap…
Visible surface plasmon resonances (SPRs) could be excited by TE wave polarization in one-dimensional photonic crystals (PCs) coated by a graphene layer under the Kretschmann configuration. In this work, the plasmonic Bloch wave properties beyond Dirac points in a one-dimensional graphene-based photonic sensing structure have been numerically studied. We demonstrate that emergent plasmonic dips in the reflectance spectra of the suggested photonic device in the visible region exhibit tunable characteristics upon modulation of the chemical potential and the hopping parameter. The sensitivity of …
Inverse Design of Integrated Photonic Components for Visible-Light Applications
University of Graz（格拉茨大学）；Christian Doppler Laboratory for Structured Matter Based Sensing（基于结构化物质的传感克劳斯·多普勒实验室）；University of Glasgow（格拉斯哥大学）；Sant’Anna School of Advanced Studies（圣安娜高等研究学院）
Photonic quantum technologies have been extensively studied in quantum information science, owing to the high-speed transmission and outstanding low-noise properties of photons. However, applications based on photonic entanglement are restricted due to the diffraction limit. In this work, we demonstrate for the first time the maintaining of quantum polarization entanglement in a nanoscale hybrid plasmonic waveguide composed of a fiber taper and a silver nanowire. The transmitted state throughout the waveguide has a fidelity of 0.932 with the maximally polarization entangled state Φ+. Furthermo…
We consider large-mode area photonic crystal fibers for visible applications where micro-deformation induced attenuation becomes a potential problem when the effective area A_eff is sufficiently large compared to lambda^2. We argue how a slight increase in fiber diameter D can be used in screening the high-frequency components of the micro-deformation spectrum mechanically and we confirm this experimentally for both 15 and 20 micron core fibers. For typical bending-radii (R~16 cm) the operating band-width increases by ~3-400 nm to the low-wavelength side.
Visible light integrated photonics is emerging as a promising technology for the realization of optical devices for applications in sensing, quantum information and communications, imaging and displays. Among the existing photonic platforms, high-index contrast silicon nitride ($Si_{3}N_{4}$) waveguides offer broadband transparency in the visible spectral range and a high scale of integration. As far as the complexity of photonic integrated circuits (PICs) increases, on-chip detectors are required to monitor their working point for reconfiguration and stabilization operations. In this work we …
We report the generation of a purely vibrational Raman comb, extending from the vacuum ultraviolet (184 nm) to the visible (478 nm), in hydrogen-filled kagomé-style photonic crystal fiber pumped at 266 nm. Stimulated Raman scattering and molecular modulation processes are enhanced by higher Raman gain in the ultraviolet. Owing to the pressure-tunable normal dispersion landscape of the fiber-gas system in the ultraviolet, higher-order anti-Stokes bands are generated preferentially in higher-order fiber modes. The results pave the way towards tunable fiber-based sources of deep- and vacuum ultra…
Using a pair of p- and n-type semiconductors separated by a nanoscale vacuum gap, we introduce an optoelectronics element prototype, "photonic p-n junction", as an analogue of the electronic p-n junction, which is demonstrated to serve as an ideal near-field heat flux modulator. The high modulation performance relies on the switch among three fundamental photon-carrier interaction modes (i.e., surface plasmon polaritons, symmetric depleted internal plasmon polaritons and symmetric accumulated surface plasmon polaritons) caused by the changes in hole and electron densities near the surfaces und…
Photonic spin Hall effect in transmission is a transverse beam shift of the out-coming beam depending on polarization of the in-coming beam. The effect can be significantly enhanced by materials with high anisotropy. We report the first experimental demonstration of the photonic spin Hall effect in a multilayer hyperbolic metamaterial at visible wavelengths (wavelengths of 520 nm and 633 nm). The metamaterial is composed of alternating layers of gold and alumina with deeply-subwavelength thicknesses, exhibiting extremely large anisotropy. The angle resolved polarimetric measurements showed the…
We demonstrate niobium titanium nitride superconducting nanowires patterned on stoichiometric silicon nitride waveguides for detecting visible and infrared photons. The use of silicon nitride on insulator on silicon substrates allows us to simultaneously realize photonic circuits for visible and infrared light and integrate them with nanowire detectors directly on-chip. By implementing a traveling wave detector geometry in this material platform, we achieve efficient single photon detection for both wavelength regimes. Our detectors are an ideal match for integrated quantum optics as they prov…
Controlling and detecting thermal radiation is of vital importance for varied applications ranging from energy conversion systems and nanoscale information processing devices to infrared imaging, spectroscopy and sensing. We review the field of high temperature thermal photonics which aims to control the spectrum, polarization, tunability, switchability and directionality of heat radiation from engineered materials in extreme environments. We summarize the candidate materials which are being pursued by the community that have simultaneous polaritonic/plasmonic properties as well as high temper…
We propose and numerically analyze the hybrid Si-Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} strip waveguide switches for Mid-IR wavelength of 2.1 $μ$m. The switches investigated are one input-one output (on-off) type and one input-two outputs (directional coupler) type. The reversible transition between the switch states is achieved by inducing the phase transition from crystalline to amorphous and vice-versa by application of voltage pulses. The approach of embedding the nanoscale active material Ge\textsubscript{2}Sb\textsubscript{2}Te\textsubscript{5} within the Si waveguide …
Narrow linewidth visible light lasers are critical for atomic, molecular and optical (AMO) applications including atomic clocks, quantum computing, atomic and molecular spectroscopy, and sensing. Historically, such lasers are implemented at the tabletop scale, using semiconductor lasers stabilized to large optical reference cavities. Photonic integration of high spectral-purity visible light sources will enable experiments to increase in complexity and scale. Stimulated Brillouin scattering (SBS) is a promising approach to realize highly coherent on-chip visible light laser emission. While pro…
Buildings or vehicles with transparent envelope can be heated up by sunlight, causing energy consumption for cooling and in extreme cases leading to vehicular heatstroke in a hot climate. Because only visible light for illumination is essential for these applications, the NIR solar radiation should be reflected to reduce heat gain and the infrared radiation emission should be enhanced for further cooling by using the sky as a heat sink. With a high NIR reflection, a transparent radiative cooling photonic structure consisting of 2D silica gratings atop ZnO/Ag/ZnO is demonstrated for energy-savi…
The study of optical phenomena on the subwavelength scale is becoming increasingly important in photonics, particularly in the fields of nanoemitters, photonic crystals and plasmonics. Subwavelength field patterns are evanescent and must thus be investigated with near-field techniques. The light powers emitted by nanoscale sources are extremely low, undermining the traditional approach of scattering a near field to a large (thus noisy) far-field detector. Nanoscale detectors, providing direct sensing in the near-field with small noise due to a small active area, are needed in high-sensitivity,…
We measure the local near-field spin in topological edge state waveguides that emulate the quantum spin Hall effect. We reveal a highly structured spin density distribution that is not linked to a unique pseudospin value. From experimental near-field real-space maps and numerical calculations, we confirm that this local structure is essential in understanding the properties of optical edge states and light-matter interactions. The global spin is reduced by a factor of 30 in the near field and, for certain frequencies, flipped compared to the pseudospin measured in the far-field. We experimenta…
While nanoscale modal confinement radically enhances a variety of nonlinear light-matter interactions within silicon waveguides, traveling-wave stimulated Brillouin scattering nonlinearities have never been observed in silicon nanophotonics. Through a new class of hybrid photonic-phononic waveguides, we demonstrate tailorable traveling-wave forward stimulated Brillouin scattering in nanophotonic silicon waveguides for the first time, yielding 3000 times stronger forward SBS responses than any previous waveguide system. Simulations reveal that a coherent combination of electrostrictive forces a…
