The topological Weyl semimetal CaSn3, belonging to the AuCu3 type cubic structure, is an important electronic system to investigate both from the point of view of fundamental physics and prospective applications. In this work, we have studied the structural, elastic, mechanical, electronic, bonding, Fermi surface and optical properties of CaSn3 in detail using the density functional theory. A comprehensive study of elastic constants and moduli shows that CaSn3 possesses low level of elastic anisotropy, reasonably good machinability, mixed bonding characteristics with ionic and covalent contributions, brittle nature and relatively high Vickers hardness with a low Debye temperature. Analysis of bond population supports the bonding nature as indicated by the elastic parameters. The bulk electronic band structure reveals clear semimetallic features with signature Dirac cone-like dispersions near the Fermi level. A pseudogap in the electronic energy density of states at the Fermi level separating the bonding and the antibonding peaks points towards significant electronic stability of cubic CaSn3. The Fermi surface mostly consists of electron-like sheets with very few small hole pockets. The band structure is fairly isotropic in the k-space. The optical constants show interesting characteristics. The reflectivity spectra show almost non-selective behavior over a wide range of photon energy encompassing infrared to mid-ultraviolet regions. High reflectivity over wide spectral range makes CaSn3 a suitable material for reflecting coating. CaSn3 is an efficient absorber of ultraviolet radiation. The refractive index is very high in the infrared to visible range. All the energy dependent optical parameters exhibit clear metallic signatures and are in complete accord with the underlying bulk electronic density of states calculations.
Bonding Signatures of Incipient Electron Localization in Topological Chiral Semimetals Near the Metal-Insulator Transition
RWTH Aachen University(亚琛工业大学);Max Planck Institute for Chemical Physics of Solids(马克斯·普朗克固体物理研究所);ESPCI Paris, Université PSL, CNRS, Sorbonne Université(巴黎高等物理化工大学、巴黎文理研究大学、法国国家科学研究中心、索邦大学);Peter Grünberg Institute – JARA-Institute Energy Efficient Information Technology (PGI- 10)(彼得·格林贝格研究所 - JARA能源高效信息技术研究所)
Structural, elastic, bonding, optoelectronic, and some thermo-physical properties of transition metal dichalcogenides ZrX2 (X = S, Se, Te): Insights from ab-initio calculations
Observation of Iso-Symmetric Structural and Lifshitz Transitions in Quasi-one-dimensional CrNbSe$_5$
Michigan State University(密歇根州立大学);Ames National Laboratory(艾姆斯国家实验室);Iowa State University(爱荷华州立大学);University of South Carolina(南卡罗来纳大学);Harvard University(哈佛大学)
First-principles study of structural, elastic, and bonding properties of pyrochlores
用密度泛函理论计算了组成为A $_2$ B $_2$ O $_7$(其中A=La,Y,B=Ti,Sn,Hf,Zr)的理想辉石的晶格常数、弹性常数和电子性质。还从弹性性质推断了一些热性质。观察到B离子的声速(以及德拜温度)随原子质量的减小而减小。静态和动态的原子电荷获得量化的共价/离子性的程度。一个大的异常贡献的动态电荷观察铪,锆,特别是钛。这归因于氧的占据$2p$态和B阳离子的未占据d态之间的杂化。基于Mulliken布居和变形电荷积分在Voronoi多面体的分析表明,这些辉石的电离度增加的顺序为Sn-Ti-Hf-Zr。电荷变形等值线图支持这一分配。
Possible applications of Mo2C in the orthorhombic and hexagonal phases explored via ab-initio investigations of elastic, bonding, optoelectronic and thermophysical properties
Prediction of Ideal Topological Semimetals with Triply Degenerate Points in NaCu$_3$Te$_2$ Family
晶体能带结构中的三重简并点(TDP)可以产生新的TDP费米子,而无需高能对应物。虽然寻找理想的TDP半金属,即在费米能级($E_F$)附近没有其他准粒子共存的干净TDP费米子,对于探索这种新费米子的本征性质是至关重要的,但这仍然是一个很大的挑战,至今尚未实现。在这里,我们公开了一种有效的方法来寻找理想的TDP半金属之间的反键$s$和键$p$轨道沿一条线在动量空间与$C_{3v}$对称性的选择性带交叉。应用这种方法,我们已经成功地确定了NaCu $_3$ Te $_2$家族的化合物是理想的TDP半金属,其中两个和只有两对TDP位于周围的$E_F$。此外,我们揭示了一个有趣的机制来调制一对TDP之间的能量分裂,并说明了TDP费米弧在这些理想的TDP半金属的内在特征。
Metallic Bonding-Driven Elastic Softness and Optical Response in the Mg-Rich Laves-Phase LaMg2
Pabna Textile Engineering College, Bangladesh University of Textiles(帕尔纳纺织工程学院,孟加拉国纺织大学);EcoBengal Centre for Materials and Energy Research(生态孟加拉材料与能源研究中心);Bangladesh Atomic Energy Regulatory Authority (BAERA)(孟加拉国原子能监管局);Department of Physics, University of Barishal(巴里萨尔大学物理系);Department of Electrical and Mechanical Engineering, Nagoya Institute of Technology(名古屋工业大学电气与机械工程系);School of Materials Science and Engineering, Faculty of Science, University of New South Wales(新南威尔士大学理学院材料科学与工程系)
Structural, elastic, electronic, bonding, thermo-mechanical and optical properties of predicted NbAlB MAB phase in comparison to MoAlB: DFT based ab-initio insights
Thickness-Dependent Interlayer Coupling and Semiconductor-to-Semimetal Crossover in Arsenene Multilayers
The Anthony J. Leggett Institute for Condensed Matter Theory, Department of Physics, University of Illinois at Urbana-Champaign(伊利诺伊大学厄巴纳-香槟分校);Materials Science and Technology Division, Oak Ridge National Laboratory(橡树岭国家实验室);Research Center for Technology Commercialization, Korea Institute of Science and Technology Information (KISTI)(韩国科学技术信息研究院)
Ab-initio insights into the structural, elastic, bonding, and thermophysical properties of UHx (x = 1, 2, 3, 5, 6, 7, 8) under pressure: possible relevance to high-Tc superconductivity
An ab initio approach to understand the structural, thermophysical, electronic, and optical properties of binary silicide SrSi2: A double Weyl semimetal
Electronic band structure and inter-atomic bonding in layered 1111-like Th-based pnictide oxides ThCuPO, ThCuAsO, ThAgPO, and ThAgAsO from first principles calculations
Surface states in bulk single crystal of topological semimetal Co$_3$Sn$_2$S$_2$ towards water oxidation
拓扑相物质的能带反转带来了奇异的物理性质,如拓扑保护表面态的出现。它们强烈地影响所研究材料的表面电子结构,并且可以作为一个很好的平台来深入了解表面反应的催化机制。在这里,我们合成了拓扑半金属Co $_3$ Sn $_2$ S $_2$的高质量块体单晶。我们发现,在室温下,Co $_3$ Sn $_2$ S $_2$自然地拥有拓扑半金属的能带结构。这就保证了Co原子表面态的存在。Co $_3$ Sn $_2$ S $_2$大块单晶暴露出由Co原子构成的Kagome晶格,具有高的电导率。它们作为析氧过程(OER)的催化中心,由于部分填充的$e_g$轨道,使成键和电子转移更有效。该块体单晶显示出优异的OER催化性能,尽管表面积比Co基纳米结构催化剂小得多。我们的研究结果强调了裁剪拓扑非平凡的表面状态的高活性电催化剂的合理设计的重要性。
Structural, elastic and electronic properties of Ir-based carbides-antiperovskites Ir3MC (M = Ti, Zr, Nb and Ta) as predicted from first-principles calculations