The IceCube Neutrino Observatory instruments roughly one cubic kilometer of deep, glacial ice below the geographic South Pole with 5160 optical sensors to register the Cherenkov light of passing relativistic, charged particles. Since its construction was completed in 2010, a wide range of analyses has been performed. Those include, among others, the discovery of a high energetic astrophysical neutrino flux, competitive measurements of neutrino oscillation parameters and world-leading limits on dark matter detection. With ever-increasing statistics the influence of insufficiently known aspects of the detector performance start to limit the potential gain of future analyses. This thesis presents calibration studies on both the hardware characteristics as well as the optical properties of the instrumented ice. Improving the knowledge of the detector systematics and the methods to study them does not only aid IceCube but also inform the design of potential future IceCube extensions.
Atmospheric neutrino oscillations with DeepCore; Supernova detection with IceCube and beyond; Study of South Pole ice transparency with IceCube flashers; Submitted papers to the 32nd International Cosmic Ray Conference, Beijing 2011.
The IceCube Neutrino Observatory, the Pierre Auger Observatory and the Telescope Array: Joint Contribution to the 35th International Cosmic Ray Conference (ICRC 2017)
All sky neutrino searches: Atmospheric neutrinos; Astrophysical neutrinos; Cosmegenic neutrinos; Submitted papers to the 32nd International Cosmic Ray Conference, Beijing 2011.
The IceCube Neutrino Observatory will be upgraded with about 700 additional optical sensor modules and new calibration devices. Particularly, improved calibration will enhance IceCube's physics capabilities both at low and high neutrino energies. An important ingredient for a good angular resolution of the observatory is a precise calibration of the positions of optical sensors. We present the concept of newly developed acoustic sensors that are mounted inside the optical modules and additional acoustic emitter modules that are attached to the strings. With this system we aim for the calibrati…
Exotic particle searches: WIMPs annihilating in the Sun, in the galactic center, in nearby dwarf galaxies; magnetic monopoles; Submitted papers to the 32nd International Cosmic Ray Conference, Beijing 2011.
Searches for point sources of astrophysical neutrinos and related measurements: Searches for steady and time-variable sources; Follow-up programs; AGNs; GRBs; Moon shadow; Submitted papers to the 32nd International Cosmic Ray Conference, Beijing 2011.
Cosmic rays and related measurements: IceTop overview; IceTop calibration; Cosmic ray composition; Air shower measurements; Studies of cosmic ray muons; Studies of PeV gamma rays; Cosmic ray anisotropy; Forbush decrease; Submitted papers to the 32nd International Cosmic Ray Conference, Beijing 2011.
The IceCube Neutrino Observatory opened the window on neutrino astronomy by discovering high-energy astrophysical neutrinos in 2013 and identifying the first compelling astrophysical neutrino source, the blazar TXS0506+056, in 2017. In this talk, we will discuss the science reach and ongoing development of the IceCube-Gen2 facility---a planned extension to IceCube. IceCube-Gen2 will increase the rate of observed cosmic neutrinos by an order of magnitude, be able to detect five-times fainter neutrino sources, and extend the measurement of astrophysical neutrinos several orders of magnitude high…
The IceCube Neutrino Observatory at the South Pole is a multi-component particle detector consisting of the IceTop surface array and the deep in-ice IceCube array. The foreseen enhancement of the surface instrumentation will consist of plastic scintillator panels read out by silicon photomultipliers. This additional detector component will calibrate the effect of snow accumulation on the IceTop tanks, improve the measurement of cosmic rays, and enhance the atmospheric background rejection for the high-energy astrophysical neutrino detection. Two scintillator prototype stations were deployed at…
An upgrade to the IceCube Neutrino Telescope is currently under construction. For this IceCube Upgrade, seven new strings will be deployed in the central region of the 86 string IceCube detector to enhance the capability to detect neutrinos in the GeV range. One of the main science objectives of the IceCube Upgrade is an improved calibration of the IceCube detector to reduce systematic uncertainties related to the optical properties of the ice. We have developed a novel optical camera and illumination system that will be part of 700 newly developed optical modules to be deployed with the IceCu…
The IceCube Neutrino Observatory is a kilometer-scale detector currently under construction at the South Pole. The full detector will comprise 5,160 photomultipliers (PMTs) deployed on 86 strings from 1.45-2.45 km deep within the ice. As of the austral summer of 2009-10, 73 out of the total number strings have been deployed, and the detector is reaching its final construction phase. A dense sub-array of 6 strings in the center of the detector (DeepCore) has been already installed for enhancing the sensitivity to low energy neutrinos. The IceCube de- tection principle is based on the measuremen…
The IceCube neutrino telescope monitors one cubic kilometer of deep Antarctic ice by detecting Cherenkov photons emitted from charged secondaries produced when neutrinos interact in the ice. The geometry of the detector, which comprises a lattice of 5160 photomultipliers, is optimized for the detection of neutrinos above 100 GeV. However, at subfreezing ice temperatures, dark noise rates are low enough that a high flux of MeV neutrinos streaming through the detector may be recognized by a collective rate enhancement in all photomultipliers. This method can be used to search for the signal of c…
The planned IceCube Upgrade, consisting of seven new instrumentation strings, will be installed at the South Pole within 2022/2023. The focus of this upgrade is calibration, reduction of systematic uncertainties and atmospheric neutrino physics. Within this scope, the "Precision Optical Calibration Module" (POCAM) will be installed at a number of positions on these new strings, to act as a calibration light source. The POCAM is an in-situ self-calibrating, isotropic, nanosecond light source that emits flashes of adjustable intensity and pulse duration. The isotropy is achieved using a teflon i…
The IceCube Neutrino Observatory at the geographic South Pole has reached a number of milestones in the field of neutrino astrophysics. The achievements of IceCube include the discovery of a high-energy astrophysical neutrino flux, and the temporal and directional correlation of neutrinos with a flaring blazar. The IceCube Upgrade, which will be constructed in the 2022/23 Antarctic Summer season, is the next stage of the IceCube project. The IceCube Upgrade consists of seven new columns of photosensors, densely embedded near the bottom center of the existing cubic-kilometer-scale IceCube Neutr…
The IceCube Neutrino Observatory at the geographic South Pole instruments a gigaton of glacial Antarctic ice with over 5000 photosensors. The detector, by now running for over a decade, will be upgraded with seven new densely instrumented strings. The project focuses on the improvement of low-energy and oscillation physics sensitivities as well as re-calibration of the existing detector. Over the last few years we developed a Precision Optical Calibration Module (POCAM) providing self-monitored, isotropic, nanosecond, light pulses for optical calibration of large-volume detectors. Over 20 next…
The optical sensors of the IceCube Neutrino Observatory are attached on vertical strings of cables. They were frozen into the ice in the deployment holes made by hot water drill. This hole ice, to the best of our knowledge, consists of a bubbly central column, with the remainder of the re-frozen volume being optically clear. The bubbly ice often blocks one or several of the calibration LEDs in every optical sensor and significantly distorts the angular profile of the calibration light pulses. It also affects the sensors' response to in-coming photons at different locations and directions. We p…
In 2006-2010, several Radio Frequency (RF) detectors and calibration equipment were deployed as part of the IceCube array at depths between 5 to 1400 meters in preparation for a future large scale GZK neutrino detector. IceCube's deep holes and well-established data handling system provide a unique opportunity for deep-ice RF detection studies at the South-Pole. We will present verification and calibration results as well as a status-review of ongoing analyses such as ice-properties, RF noise and reconstruction algorithms.
The IceCube Neutrino Observatory will be upgraded with more than 700 additional optical sensor modules and new calibration devices. Improved calibration will enhance IceCube's physics capabilities both at low and high neutrino energies. An important ingredient for good angular resolution of the observatory is precise calibration of the positions of optical sensors. Ten acoustic modules, which are capable of receiving and transmitting acoustic signals, will be attached to the strings. These signals can additionally be detected by compact acoustic sensors inside some of the optical sensor module…
The IceCube Upgrade will expand the IceCube Neutrino Observatory with nearly 800 new optical modules. A large fraction of these will be multi-PMT optical modules (mDOMs), featuring 24 PMTs pointing uniformly in all directions, providing an almost homogeneous angular coverage and providing an effective photosensitive area more than twice that of current IceCube optical modules. Two PMT models from different manufacturers are currently considered for use in the mDOM: a 3.5 inch PMT from HZC Photonics and a 3 inch PMT from Hamamatsu. Both PMTs have been characterized in terms of gain, timing, qua…
The IceCube Neutrino Observatory will be upgraded in 2022/23. For this IceCube Upgrade and the planned enlarged detector IceCube-Gen2 new optical modules are under development. One of these optical modules, the Wavelength-shifting Optical Module (WOM), uses wavelength-shifting and light-guiding techniques to measure Cherenkov photons in the UV-range. To understand the potential improvements of this new module the absorption and scattering lengths of UV light in the South Pole ice need to be measured. The measurement is done utilizing an existing borehole (SPICEcore) of 1751 m depth. The SPICEc…
The IceCube collaboration has built an in-ice neutrino telescope and a surface detector array, IceTop, at the South Pole. Over 5000 digital optical modules have been deployed in a cubic kilometer of ice between 1450 and 2450 m below the surface. The novel observatory provides a new window to explore the universe. The combination of cutting-edge discovery science and the exotic Antarctic environment is an ideal vehicle to excite and engage a wide audience. Examples of how the international IceCube Collaboration has brought the Universe to a broader audience via the South Pole are described.
Measurements of neutrinos at and below 10 GeV provide unique constraints of neutrino oscillation parameters as well as probes of potential Non-Standard Interactions (NSI). The IceCube Neutrino Observatory's DeepCore array is designed to detect neutrinos down to GeV energies. IceCube has built the world's largest data set of neutrinos >10 GeV, making searches for NSI a computational challenge. This work describes the use of convolutional neural networks (CNNs) to improve the energy reconstruction resolution and speed of reconstructing O(10 GeV) neutrino events in IceCube. Compared to current li…
In this work we discuss ongoing development of a hybrid fiber/copper data and timing infrastructure for the future IceCube-Gen2 detector. The IceCube Neutrino Observatory is a kilometer-scale detector operating with 86 strings of modules. These modules communicate utilizing a custom protocol to mitigate the signaling challenges of long distance copper cables. Moving past the limitations of a copper-based backbone will allow larger future IceCube detectors with extremely precise timing and a large margin of excess throughput to accommodate innovative future modules. To this end, the upcoming Ic…
IceCube-Gen2 is a planned extension of the IceCube Neutrino Observatory at the South Pole designed to study the high-energy neutrino sky from TeV to EeV energies with a five times better point source sensitivity than the current IceCube detector. This is achieved by deploying 120 new strings with attached optical sensors in a pattern around IceCube that features considerably larger distances between individual strings than the $\sim$125$\,$m for the existing detector. Here, we present the results of an optimization study searching for the best point source sensitivity while varying the IceCube…
The IceCube Neutrino Observatory, completed in December 2010 and located at the geographic South Pole, is the largest neutrino telescope in the world. IceCube includes the more densely instrumented DeepCore subarray, which increases IceCube's sensitivity at neutrino energies down to 10 GeV. DeepCore has recently demonstrated sensitivity to muon neutrino disappearance from atmospheric neutrino oscillation. A further extension is under consideration, the Precision IceCube Next Generation Upgrade (PINGU) which would lower the energy threshold below about 10 GeV. In particular, PINGU would be sens…
The IceCube Observatory is a kilometer-cube neutrino telescope under construction at the South Pole and planned to be completed in early 2011. When completed it will consist of 5,160 Digital Optical Modules (DOMs) which detect Cherenkov radiation from the charged particles produced in neutrino interactions and by cosmic ray initiated atmospheric showers. IceCube construction is currently 90% complete. A selection of the most recent scientific results are shown here. The measurement of the anisotropy in arrival direction of galactic cosmic rays will also be presented and discussed.
The IceCube Neutrino Observatory is able to measure the all-flavor neutrino flux in the energy range between 100 GeV and several PeV. Due to the different features of the neutrino interactions and the geometry of the detector, all high-level analyses require a selection of suitable events as a first step. However, presently, no algorithm exists that gives a generic prediction of an event's underlying interaction type. One possible solution to this is the use of deep neural networks similar to the ones commonly used for 2D image recognition. The classifier that we present here is based on the m…
IceAct is a proposed surface array of compact (50 cm diameter) and cost-effective Imaging Air Cherenkov Telescopes installed at the site of the IceCube Neutrino Observatory at the geographic South Pole. Since January 2019, two IceAct telescope demonstrators, featuring 61 silicon pho- tomultiplier (SiPM) pixels have been taking data in the center of the IceTop surface array during the austral winter. We present the first analysis of hybrid cosmic ray events detected by the IceAct imaging air-Cherenkov telescopes in coincidence with the IceCube Neutrino Observatory, includ- ing the IceTop surfac…
Analysis of cosmic ray surface data collected with the IceTop array of Cherenkov detectors at the South Pole provides an accurate measurement of the cosmic ray spectrum and its features in the "knee" region up to energies of about 1 EeV. IceTop is part of the IceCube Observatory that includes a deep-ice cubic kilometer detector that registers signals of penetrating muons and other particles. Surface and in-ice signals detected in coincidence provide clear insights into the nuclear composition of cosmic rays. IceCube already measured an increase of the average primary mass as a function of ener…
For the in-ice component of the next generation neutrino observatory at the South Pole, IceCube-Gen2, a new sensor module is being developed, which is an evolution of the D-Egg and mDOM sensors developed for the IceCube Upgrade. The sensor design features up to 18 4-inch PMTs distributed homogeneously in a borosilicate glass pressure vessel. Challenges arise for the mechanical design from the tight constraints on the bore hole diameter (which will be 2 inches smaller than for IceCube Upgrade) and from the close packing of the PMTs. The electronics design must meet the space constraints posed b…
The next generation of the IceCube Neutrino Observatory, IceCube-Gen2, will constitute a much larger detector, increasing the rate of high-energy neutrinos. IceCube-Gen2 will address the long-standing questions about astrophysical accelerators. The experiment will also include a surface air-shower detector which will allow for measurements of cosmic rays in the energy region where a transition between Galactic and extragalactic accelerators is expected. As a baseline design for the surface detector, we consider a surface array above the optical in-ice array consisting of the same type of stati…
The IceCube Neutrino Observatory instruments about 1 km$^3$ of deep, glacial ice at the geographic South Pole using 5160 photomultipliers to detect Cherenkov light from relativistic, charged particles. Most IceCube science goals rely on precise understanding and modelling of the optical properties of the instrumented ice. A peculiar light propagation effect observed by IceCube is an anisotropic attenuation, which is aligned with the local flow of the ice. Recent efforts have shown this effect is most likely due to curved photon trajectories resulting from the asymmetric light diffusion in the …
The IceCube Observatory at the South Pole is composed of a cubic kilometer scale neutrino telescope buried beneath the icecap and a square-kilometer surface water Cherenkov tank detector array known as IceTop. The combination of the surface array with the in-ice detector allows the dominantly electromagnetic signal of air showers at the surface and their high-energy muon signal in the ice to be measured in coincidence. This ratio is known to carry information about the nuclear composition of the primary cosmic rays. This paper reviews the recent results from cosmic-ray measurements performed w…
Papers on research & development towards IceCube-Gen2, the next generation neutrino observatory at South Pole, submitted to the 35th International Cosmic Ray Conference (ICRC 2017, Busan, South Korea) by the IceCube-Gen2 Collaboration.
The IceCube Neutrino Observatory, deployed inside the deep glacial ice at the South Pole, is the largest neutrino telescope in the world. While eight years have passed since IceCube discovered a diffuse flux of high-energy astrophysical neutrinos, the sources of the vast majority of these neutrinos remain unknown. Here, we present a new search for neutrino point sources that improves the accuracy of the statistical analysis, especially in the low energy regime. We replaced the usual Gaussian approximations of IceCube's point spread function with precise numerical representations, obtained from…
The IceCube Neutrino Observatory, located under 1.4 km of Antarctic ice, instruments a cubic kilometer of ice with 5,160 optical modules that detect Cherenkov radiation originating from neutrino interactions. The more densely instrumented center, DeepCore, aims to detect atmospheric neutrinos at 10-GeV scales to improve important measurements of fundamental neutrino properties such as the oscillation parameters and to search for non-standard interactions. Sensitivity to oscillation parameters, dependent on the distance traveled over the neutrino energy (L/E), is limited in IceCube by the resol…
