Time domain astronomy and the increasing number of exoplanet candidates call for reliable, robust, and automatic wavelength calibration. We present an algorithm for wavelength calibrating échelle spectrographs that uses order-by-order extracted spectra and a list of laboratory wavelengths. Our approach is fully automatic and does not need the pixel locations of certain spectral features with which to anchor the wavelength solution, nor the true order number of each diffraction order. We use spectral features that are duplicated in adjacent orders to establish the scale-invariant component of the wavelength solution. We then match the central wavelengths of spectral features to laboratory wavelengths to establish the scale and higher order components of the wavelength solution. We demonstrate our method on the four spectrographs of Las Cumbres Observatory's Network of Robotic Échelle Spectrographs (NRES), on the High Accuracy Radial Velocity Planet Searcher (HARPS) spectrograph, and on synthetic data. We obtain a velocity-equivalent precision of 10 m/s on NRES. We achieve 1 m/s on HARPS, which agrees with the precision reported by the HARPS team. On synthetic data, we achieve the velocity precision set by Gaussian centroiding errors. Our algorithm likely holds for a wide range of spectrographs beyond the five presented here. We provide an open-source Python package, xwavecal (https://github.com/gmbrandt/xwavecal/), which outputs wavelength calibrated spectra as well as the wavelengths of spectral features.
We describe a new method to derive clean, iodine-free spectra directly from observations acquired using high-resolution echelle spectrographs equipped with iodine cells. The main motivation to obtain iodine-free spectra is to use portions of the spectrum that are superimposed with the dense forest of iodine absorption lines, in order to retrieve lines that can be used to monitor the magnetic activity of the star, helping to validate candidate planets. In short, we provide a straight-forward methodology to clean the spectra by using the forward model used to derive radial velocities, the Line S…
We present the wavelength calibration of the Hamilton echelle spectrograph (the Lick observatory). The main problem of the calibration arises from the fact that thorium lines are absent in the spectrum of "ThAr" hollow-cathode lamp now under the operation. On the other hand, numerous unknown strong lines are present in the spectrum. These lines was identified with titanium. We estimate the temperature of the lamp gas which permits us to calculate the intensities of the lines, and to select a large number of relevant Ti I and Ti II lines. The titanium line list for the Lick hallow-cathode lamp …
We present a modelling scheme that predicts the centroids of spectral line features for a high resolution Echelle spectrograph to a high accuracy. Towards this, a computing scheme is used, whereby any astronomical spectrograph can be modelled and controlled without recourse to a ray tracing program. The computations are based on paraxial ray trace and exact corrections added for certain surface types and Buchdahl aberration coefficients for complex modules. The resultant chain of paraxial ray traces and corrections for all relevant components is used to calculate the location of any spectral l…
Echelle spectrographs with their high resolution plays important role in determination of characteristics of stellar lines. Wide field of applications is focused mainly on the measurements of precise radial velocity applied in exoplanetary research. In my diploma thesis I am concentrated on the calibration of the Ondřejov Echelle Spectrograph at Astronomical Institute of the Czech Academy of Sciences. My role was to investigate the wide field of opportunities how to process the data with the best possible results. Successful reduction was performed by both Image Reduction and Analysis Facility…
Within the ESPRESSO project a new flexible data reduction library is being built. ESPRESSO, the Echelle SPectrograph for Rocky Exoplanets and Stable Spectral Observations is a fiber-fed, high-resolution, cross-dispersed echelle spectrograph. One of its main scientific goals is to search for terrestrial exoplanets using the radial velocity technique. A dedicated pipeline is being developed. It is designed to be able to reduce data from different similar spectrographs: not only ESPRESSO, but also HARPS, HARPS-N and possibly others. Instrument specifics are configurable through an input static co…
A fiber-fed Echelle spectrograph at 2.3 m Vainu Bappu Telescope (VBT), Kavalur, has been in operation since 2005. Owing to various technological advancements in precision spectroscopy in recent years, several research avenues have been opened in observational astronomy. These developments have created a demand to improve the Doppler precision of our spectrograph. Currently, the stability of the instrument is compromised by the temperature and pressure fluctuations inside the Echelle room. Further, a better wavelength calibration approach is needed to carefully track and disentangle the instrum…
The Tartu Observatory Fiber-fed Echelle Spectrograph (TOFES) Data Reduction Pipeline
Tartu Observatory, University of Tartu（塔尔图大学塔尔图天文台）；Space Research Institute, Austrian Academy of Sciences（奥地利科学院空间研究所）；Institute for Theoretical and Computation Physics, Graz University of Technology（格拉茨工业大学理论与计算物理研究所）；Department of Physics and Astronomy, Uppsala University（乌普萨拉大学物理与天文学系）；Department of Physics and Astronomy, University College London（伦敦大学学院物理与天文学系）；European Southern Observatory（欧洲南方天文台）
We have studied the Residual Blaze Functions (RBF) resulting from division of individual echelle orders by extracted flat-field in spectra obtained by slit-fed OES spectrograph of 2m telescope of Ondřejov observatory, Czech Republic. We have eliminated the dependence on target and observation conditions by semiautomatic fitting of global response function, thus getting the instrument-only dependent part, which may be easily incorporated into data reduction pipeline. The improvement of reliability of estimation of continuum on spectra of targets with wide and shallow lines is noticeable and the…
In February of 2014 the Yale Exoplanet Laboratory was commissioned to design, build, and deliver a high resolution (R = 60,000) spectrograph for the 1.65-meter telescope at the Moletai Astronomical Observatory. The observatory is operated by the Institute of Theoretical Physics and Astronomy at Vilnius University. The Vilnius University Echelle Spectrograph (VUES) is a white-pupil design that is fed via an octagonal fiber from the telescope and has an operational bandpass from 400 to 880 nm. VUES incorporates a novel modular optomechanical design that allows for quick assembly and alignment on…
We introduce a data reduction package written in Interactive Data Language (IDL) for the Magellan Echellete Spectrograph (MAGE). MAGE is a medium-resolution (R ~4100), cross-dispersed, optical spectrograph, with coverage from ~3000-10000 Angstroms. The MAGE Spectral Extractor (MASE) incorporates the entire image reduction and calibration process, including bias subtraction, flat fielding, wavelength calibration, sky subtraction, object extraction and flux calibration of point sources. We include examples of the user interface and reduced spectra. We show that the wavelength calibration is suff…
In this paper we describe the echelle spectrograph of the 2 meter telescope of the Rozhen National Astronomical Observatory. The spectrograph is a cross-dispersed, bench-mounted, fiber-fed instrument giving a resolution from $\sim$30000 to $\sim$45000. The spectral range obtained in one single image is from 3900 to 9000 Å. We describe the parameters of the fiber injection and the guiding unit, of the spectrograph itself, and of the detector. The identified orders and the resulting resolving power are presented. The opportunity to increase of the resolution by using a narrower slit is discussed…
A new off-shelf low-cost echelle spectrograph was installed recently on the 0.6m telescope at the Stará Lesná Observatory (Slovakia). In this paper we describe in details the radial velocity (RV) analysis of the first three transiting planetary systems, HAT-P-2, WASP-14 and XO-3, observed with this instrument. Furthermore, we compare our data with the RV data achieved with echelle spectrographs of other sub-meter-, meter- and two-meter-class telescopes in terms of their precision. Finally, we investigate the applicability of our RV data for modeling orbital parameters.
We present solution of the problem of wavelength calibration for Hamilton Echelle spectrograph using hollow cathode lamp, which was operated at Lick Observatory Shane telescope before June 9, 2011. The spectrum of the lamp claimed to be thorium-argon, contains, in addition to the lines of thorium and argon, a number of the unrecognized lines identified by us with tantalum. Using atomic data for measured lines of tantalum and thorium, we estimated the temperature of the gas in the lamp as T=3120+/-60 K. From the atomic line database VALD3 we selected all lines of TaI and TaII which can be seen …
Accurate wavelength calibration is an important factor for any measurement with high resolution spectrographs. Stellar spectrum comprises of discrete absorption or emission lines whose position is precisely determined by calibrating the spectrograph using known reference lines generated from laboratory sources. For the spectrograph to measure small variations in Doppler shift, the wavelength calibration must be sufficiently stable during observation time. Instrument instability, mainly due to environmental factors like temperature and pressure variations, limitations of traditional calibration…
A wavelength calibration system based on a laser frequency comb (LFC) was developed in a co-operation between the Kiepenheuer-Institut für Sonnenphysik, Freiburg, Germany and the Max-Planck-Institut für Quantenoptik, Garching, Germany for permanent installation at the German Vacuum Tower Telescope (VTT) on Tenerife, Canary Islands. The system was installed successfully in October 2011. By simultaneously recording the spectra from the Sun and the LFC, for each exposure a calibration curve can be derived from the known frequencies of the comb modes that is suitable for absolute calibration at th…
The Weihai Echelle Spectrograph (WES) is the first fiber-fed echelle spectrograph for astronomical observation in China. It is primarily used for chemical abundance and asteroseismology studies of nearby bright stars, as well as radial velocity detections for exoplanets. The optical design of WES is based on the widely demonstrated and well-established white-pupil concept. We describe the WES in detail and present some examples of its performance. A single exposure echelle image covers the spectral region 371-1,100 nm in 107 spectral orders over the rectangular CCD. The spectral resolution $R=…
We present the first light commissioning results from the Physical Research Laboratory (PRL) optical fiber-fed high resolution cross-dispersed Echelle Spectrograph. It is capable of a single- shot spectral coverage of 3700A to 8600A at R ~ 63,000 and is under very stable conditions of temperature (0.04°C at 23°C). In the very near future pressure control will also be achieved by enclosing the entire spectrograph in a low-pressure vacuum chamber (~0.01mbar). It is attached to a 1.2m telescope using two 50micron core optical fibers (one for the star and another for simultaneous Th-Ar spectral ca…
The Echelle spectrograph operating at Vainu Bappu Telescope (VBT), India, is a general purpose instrument used for many high-resolution spectroscopic observations. A concerted effort is being made to expand the scientific capability of the instrument in emerging areas of observational astronomy. The present study is aimed at evaluating the feasibility of the spectrograph to carry out precision Radial Velocity (RV) measurements. In the current design, major factors limiting the RV precision of the spectrograph arise from the movable grating and slit; optical aberrations; positional uncertainty …
We propose a design of an adaptive optics (AO) system for the high-resolution fiber-fed echelle spectrograph installed at the Nasmyth focus of the 6-m BTA telescope at the Special Astrophysical Observatory (SAO) of the Russian Academy of Sciences (RAS). The system will be based on a pyramid wavefront sensor and benefit from the experience of the Laboratoire d'Astrophysique de Marseille team in the field of adaptive optics. The AO will operate in the visible domain of 430-680 nm, in an f\30 input beam and provide correction for the on-axis source only. The main challenges in this particular des…
Context: Instrumental profile (IP) is the basic property of a spectrograph. Accurate IP characterisation is the prerequisite of accurate wavelength solution. It also facilitates new spectral acquisition methods such as the forward modeling and deconvolution. Aims: We investigate an IP modeling method for the fibre-fed echelle spectrograph with the emission lines of the ThAr lamp, and explore the method to evaluate the accuracy of IP characterisation. Methods: The backbone-residual (BR) model is put forward and tested on the fibre-fed High Resolution Spectrograph (HRS) at the Chinese Xinglong 2…
In this proceeding, we describe the scientific motivation and technical development of the Colorado High-resolution Echelle Stellar Spectrograph (CHESS), focusing on the hardware advancements and testing supporting the second flight of the payload (CHESS-2). CHESS is a far ultraviolet (FUV) rocket-borne instrument designed to study the atomic-to-molecular transitions within translucent cloud regions in the interstellar medium (ISM). CHESS is an objective f/12.4 echelle spectrograph with resolving power $>$ 100,000 over the band pass 1000 $-$ 1600 Å. The spectrograph was designed to employ an R…
The Echelle spectrograph operating at Vainu Bappu Telescope (VBT) is a general purpose instrument designed for high resolution spectroscopy. It is being considered for precision Doppler measurements without altering the existing design and basic usage. However, the design level limitations and environmental perturbations are a major source of instability and systematic errors. As a result, a small Doppler signal in the stellar spectra is completely swamped by the large and uncontrolled instrumental drift. In this paper, we discuss some of the remedial measures we took to improve the radial vel…
Over the past decades hollow-cathode lamps have been calibration standards for spectroscopic measurements. Advancing to cm/s radial velocity precisions with the next generation of instruments requires more suitable calibration sources with more lines and less dynamic range problems. Fabry-Perot interferometers provide a regular and dense grid of lines and homogeneous amplitudes making them good candidates for next generation calibrators. We investigate the usefulness of Fabry-Perot etalons in wavelength calibration, present an algorithm to incorporate the etalon spectrum in the wavelength solu…
We present spectrograph design details and initial radial velocity results from the PRL optical fiber-fed high-resolution cross-dispersed echelle spectrograph (PARAS), which has recently been commissioned at the Mt Abu 1.2 m telescope, in India. Data obtained as part of the post-commissioning tests with PARAS show velocity precision better than 2m/s over a period of several months on bright RV standard stars. For observations of sigma-Dra we report 1.7m/s precision for a period of seven months and 2.1m/s for HD 9407 over a period of 2 months. PARAS is capable of a single-shot spectral coverage…
CARMENES, Calar Alto high-Resolution search for M dwarfs with Exo-earths with a Near-infrared Echelle Spectrograph, is a study for a next-generation instrument for the 3.5m Calar Alto Telescope to be designed, built, integrated, and operated by a consortium of nine German and Spanish institutions. Our main objective is finding habitable exoplanets around M dwarfs, which will be achieved by radial velocity measurements on the m/s level in the near-infrared, where low-mass stars emit the bulk of their radiation.
One limitation in characterizing exoplanet candidates is the availability of infrared, high-resolution spectrographs. An important factor in the scarcity of high precision IR spectrographs is the high cost of these instruments. We present a new optical design, which leads to a cost-effective solution. Our instrument is a high-resolution (R=60,000) infrared spectrograph with a R6 Echelle grating and an image slicer. We compare the best possible performance of quasi-Littrow and White Pupil setups, and prefer the latter because it achieves higher image quality. The instrument is proposed for the …
We evaluate a pre-production BACHES échelle spectrograph in terms of its usefulness for radial velocity surveys of binary stars with small telescopes in a remote and autonomous. We use the Solaris-4 observatory located in Casleo, Argentina, that is part of a global network of autonomous observatories as the test-bed for the instrument. The setup is designed in such a way that spectroscopy and photometry can be carried out using the same telescope without the need to mechanically modify the imaging train. We observe single spectroscopic standard stars as well as binary stars up to 9.75 mag. We …
We present here CAFE, the Calar Alto Fiber-fed Echelle spectrograph, a new instrument built at the Centro Astronomico Hispano Alemán (CAHA). CAFE is a single fiber, high-resolution ($R\sim$70000) spectrograph, covering the wavelength range between 3650-9800Å. It was built on the basis of the common design for Echelle spectrographs. Its main aim is to measure radial velocities of stellar objects up to $V\sim$13-14 mag with a precision as good as a few tens of $m s^{-1}$. To achieve this goal the design was simplified at maximum, removing all possible movable components, the central wavelength i…
Technological advancement has led to improvement in the design capabilities of astronomical spectrographs, allowing for high precision spectroscopy, thereby expanding the realms of observational astronomy. High-resolution spectrographs use Echelle grating that operates in higher orders, giving more detailed spectra. Often, curvature and tilted lines are observed in the spectra, arising due to the design trade-offs of the respective spectrographs. Removal of these artifacts can help avoid wrong flux calculation and line centroid position misinterpretation, which can aid in a better prediction o…
Fulfilling the goals of space-based exoplanetary transit surveys, like Kepler and TESS, is impossible without ground-based spectroscopic follow-up. In particular, the first-step vetting of candidates could easily necessitate several hundreds of hours of telescope time -- an area where 2-m class telescopes can play a crucial role. Here, we describe the results from the science verification of the Ondřejov Echelle Spectrograph (OES) installed on the 2-m Perek telescope. We discuss the performance of the instrument as well as its suitability for the study of exoplanetary candidates from space-bas…
The study of Earth-mass extrasolar planets via the radial-velocity technique and the measurement of the potential cosmological variability of fundamental constants call for very-high-precision spectroscopy at the level of $\updeltaλ/λ<10^{-9}$. Wavelength accuracy is obtained by providing two fundamental ingredients: 1) an absolute and information-rich wavelength source and 2) the ability of the spectrograph and its data reduction of transferring the reference scale (wavelengths) to a measurement scale (detector pixels) in a repeatable manner. The goal of this work is to improve the wavelength…
PEPSI is the bench-mounted, two-arm, fibre-fed and stabilized Potsdam Echelle Polarimetric and Spectroscopic Instrument for the 2x8.4 m Large Binocular Telescope (LBT). Three spectral resolutions of either 43 000, 120 000 or 270 000 can cover the entire optical/red wavelength range from 383 to 907 nm in three exposures. Two 10.3kx10.3k CCDs with 9-μm pixels and peak quantum efficiencies of 96 % record a total of 92 echelle orders. We introduce a new variant of a wave-guide image slicer with 3, 5, and 7 slices and peak efficiencies between 96 %. A total of six cross dispersers cover the six wav…
The Waltz Spectrograph is a fiber-fed high-resolution échelle spectrograph for the 72 cm Waltz Telescope at the Landessternwarte, Heidelberg. It uses a 31.6 lines/mm 63.5$^{\circ}$ blaze angle échelle grating in white-pupil configuration, providing a spectral resolving power of $R\sim$65,000 covering the spectral range between 450$-$800\,nm in one CCD exposure. A prism is used for cross-dispersion of échelle orders. The spectrum is focused by a commercial apochromat onto a 2k$\times$2k CCD detector with 13.5$μ$m per pixel. An exposure meter will be used to obtain precise photon-weighted midpoi…
A base model of the high-resolution fiber-fed spectrograph is developed. In combination with the SAO 1-meter telescope the spectrograph has the following parameters: spectral resolution R=45000, the number of simultaneous registered orders is 86 within spectral region 3850$÷$10850 Å, echelle orders are overlapping for $λ<9000$ Å.
High-quality stellar spectra are in great demand now - they are the most important ingredient in the stellar population synthesis to study galaxies and star clusters. Here we describe the procedures to increase the quality of flux calibration of stellar spectra. We use examples of NIR intermediate-resolution Echelle spectra collected with the Folded InfraRed Echellete (R~6500, Magellan Baade) and high-resolution UV-optical spectra observed with UVES (R~80000, ESO VLT). By using these procedures, we achieved the quality of the global spectrophotometric calibration as good as 1-2%, which fulfill…
The wavelength calibration of spectrographs is an essential but challenging task in many disciplines. Calibration is traditionally accomplished by imaging the spectrum of a light source containing features that are known to appear at certain wavelengths and mapping them to their location on the sensor. This is typically required in conjunction with each scientific observation to account for mechanical and optical variations of the instrument over time, which may span years for certain projects. The method presented here investigates the usage of color itself instead of spectral features to cal…
CARMENES (Calar Alto high-Resolution search for M dwarfs with Exo-earths with Near-infrared and optical Echelle Spectrographs) is a next generation instrument being built for the 3.5-m telescope at the Calar Alto Observatory by a consortium of eleven Spanish and German institutions. Conducting a five-year exoplanet survey targeting 300 M dwarfs with the completed instrument is an integral part of the project. The CARMENES instrument consists of two separate echelle spectrographs covering the wavelength range from 550 to 1700 nm at a spectral resolution of R=82,000, fed by fibers from the Casse…
The current STELLA Echelle spectrograph (SES), which records 390nm to 870nm in one shot at a spectral resolution of 55000, will be replaced by a suite of specialized spectrographs in three spectral bands. The UV will be covered by a newly designed H&K spectrograph covering 380nm to 470nm (SES-H&K), the visual band (470nm - 690nm) will be covered by SES-VIS, which is a vacuum-stabilized spectrograph designed for high radial-velocity accuracy, and the NIR will be covered by the current SES spectrograph from 690nm to 1050nm. In order to improve the UV transmission, and to accommodate three differ…
We present the wavelength calibration for the lenslet-based Integral Field Spectrograph (IFS) that serves as the science instrument for the Gemini Planet Imager (GPI). The GPI IFS features a 2.7" x 2.7" field of view and a 190 x 190 lenslet array (14.3 mas/lenslet) operating in $Y$, $J$, $H$, and $K$ bands with spectral resolving power ranging from $R$ $\sim$ 35 to 78. Due to variations across the field of view, a unique wavelength solution is determined for each lenslet characterized by a two-dimensional position, the spectral dispersion, and the rotation of the spectrum with respect to the d…
Design and Commissioning of an Iodine Cell for the ESPRESSO Spectrograph
National Institute of Standards and Technology（美国国家标准与技术研究院）；Imperial College London（帝国理工学院）；Carnegie Institution for Science, Earth & Planets Laboratory（卡内基科学学会地球与行星实验室）
Excalibur is a non-parametric, hierarchical framework for precision wavelength-calibration of spectrographs. It is designed with the needs of extreme-precision radial velocity (EPRV) in mind, which require that instruments be calibrated or stabilized to better than $10^{-4}$ pixels. Instruments vary along only a few dominant degrees of freedom, especially EPRV instruments that feature highly stabilized optical systems and detectors. Excalibur takes advantage of this property by using all calibration data to construct a low-dimensional representation of all accessible calibration states for an …
The eShel, an off-the-shelf, fiber-fed echelle spectrograph ($R \approx 10,000$), was installed on the 1m telescope at the Wise observatory in Israel. We report the installation of the multi-order spectrograph, and describe our pipeline to extract stellar radial velocity from the obtained spectra. We also introduce a new algorithm---UNICOR, to remove radial-velocity systematics that can appear in some of the observed orders. We show that the system performance is close to the photon-noise limit for exposures with more than $10^7$ counts, with a precision that can get better than 200 m/s for F-…
Modal noise in optical fibers imposes limits on the signal to noise and velocity precision achievable with the next generation of astronomical spectrographs. This is an increasingly pressing problem for precision radial velocity (RV) spectrographs in the near-infrared (NIR) and optical that require both high stability of the observed line profiles and high signal to noise. Many of these spectrographs plan to use highly coherent emission line calibration sources like laser frequency combs and Fabry-Perot etalons to achieve precision sufficient to detect terrestrial mass planets. These high prec…
The RISTRETTO project is aiming to build an instrument that will detect the reflected light from close-by exoplanet. It is a two stage instrument: An extreme AO system in the visible, followed by a seven spaxel single mode High resolution Spectrograph. In this paper we present the design of this spectrograph: a classical echelle spectrograph fed with single mode fibers. Standard single mode fibers have been chosen and are forming a long tilted slit in order to have the right order spacing on the detector. The instrument will be under vacuum and thermally controlled in order to make it stable.
ANDES, the high-resolution spectrograph for the ELT: design and performance analysis of the YJH spectrograph
UK Astronomy Technology Centre, Royal Observatory Edinburgh（英国天文学技术中心，爱丁堡皇家天文台）；Université de Montréal（蒙特利尔大学）；Université Laval（拉瓦尔大学）；Cavendish Laboratory, University of Cambridge（剑桥大学卡文迪许实验室）；Uppsala University（乌普萨拉大学）；INAF – Osservatorio Astrofisico di Arcetri（意大利国家天体物理研究所阿切特里天文台）；INAF - Osservatorio Astronomico di Trieste（意大利国家天体物理研究所的里雅斯特天文台）
Observational cosmology employing optical surveys often require precise flux calibration. In this context we present SNIFS Calibration Apparatus (SCALA), a flux calibration system developed for the SuperNova Integral Field Spectrograph (SNIFS), operating at the University of Hawaii 2.2 m telescope. SCALA consists of a hexagonal array of 18 small parabolic mirrors distributed over the face of, and feeding parallel light to, the telescope entrance pupil. The mirrors are illuminated by integrating spheres and a wavelength-tunable (from UV to IR) light source, generating light beams with opening a…
We report on the development and construction of a new fiber-fed, red-optical, high-precision radial-velocity spectrograph for one of the twin 6.5m Magellan Telescopes in Chile. MAROON-X will be optimized to find and characterize rocky planets around nearby M dwarfs with an intrinsic per measurement noise floor below 1 m/s. The instrument is based on a commercial echelle spectrograph customized for high stability and throughput. A microlens array based pupil slicer and double scrambler, as well as a rubidium-referenced etalon comb calibrator will turn this spectrograph into a high-precision ra…
(abridged) Even if the HARPS spectrograph has been operational for more than 15 years and it provides among the most precise Doppler measurements, improvements are still possible. One known problem, for instance, is the non-fully regular block-stitching of the CCDs, which introduces, in some cases, one-year period parasitic signals in the measured radial velocity. The aim is to improve the wavelength calibration of HARPS to push further its planet-detection capabilities. The properties of the CCD stitching-induced pixel-size anomalies are determined with LED flat-field frames, and then a physi…
The Gemini Planet Imager (GPI) is a new facility instrument for the Gemini Observatory designed to provide direct detection and characterization of planets and debris disks around stars in the solar neighborhood. In addition to its extreme adaptive optics and corona graphic systems which give access to high angular resolution and high-contrast imaging capabilities, GPI contains an integral field spectrograph providing low resolution spectroscopy across five bands between 0.95 and 2.5 $μ$m. This paper describes the sequence of processing steps required for the spectro-photometric calibration of…
We discuss the ongoing development of single-mode fiber Fabry-Perot (FFP) Interferometers as precise astro-photonic calibration sources for high precision radial velocity (RV) spectrographs. FFPs are simple, inexpensive, monolithic units that can yield a stable and repeatable output spectrum. An FFP is a unique alternative to a traditional etalon, as the interferometric cavity is made of single-mode fiber rather than an air-gap spacer. This design allows for excellent collimation, high spectral finesse, rigid mechanical stability, insensitivity to vibrations, and no need for vacuum operation. …
Integral Field Spectrographs (IFS) often require non-trivial calibration techniques to process raw data. The OH Suppressing InfraRed Imaging Spectrograph (OSIRIS) at the W. M. Keck Observatory is a lenslet-based IFS that requires precise methods to associate the flux on the detector with both a wavelength and a position on the detector. During calibration scans, a single column lenslet mask is utilized to keep light from adjacent lenslet columns separate from the primary lenslet column, in order to uniquely determine spectral response of individual lenslets on the detector. Despite employing a…
