Ambient backscatter communication has shown great potential in the development of future wireless networks. It enables a backscatter transmitter (BTx) to send information directly to an adjacent receiver by modulating over ambient radio frequency (RF) carriers. In this paper, we consider a cooperative ambient backscatter communication system where a multi-antenna cooperative receiver separately decodes signals from an RF source and a BTx. Upper bounds of the ergodic rates of both links are derived. The power scaling laws are accordingly characterized for both the primary cellular transmission and the cooperative backscatter. The impact of additional backscatter link is also quantitatively analyzed. Simulation results are provided to verify the derived results.
Ambient backscatter is an intriguing wireless communication paradigm that allows small devices to compute and communicate by using only the power they harvest from radio-frequency (RF) signals in the air. Ambient backscattering devices reflect existing RF signals emitted by legacy communications systems, such as digital TV broadcasting, cellular or Wi-Fi ones, which would be otherwise treated as harmful sources of interference. This paper deals with the ultimate performance limits of ambient backscatter systems in broadband fading environments, by considering different amounts of network state…
Simplifying the detection procedure and improving the bit error rate (BER) performance of a non-coherent receiver in ambient backscatter is vital for enhancing its ability to function without the channel state information (CSI). In this work, we analyze the BER performance of Manchester encoding which is implemented at the transmitter for data transmission, and demonstrate that the optimal decision rule is independent of the system parameters. Further, through extensive numerical results, it is shown that the ambient backscatter system can achieve a signal-to-noise ratio (SNR) gain with Manche…
Low-power ambient backscatter communication (AmBC) relying on radio-frequency (RF) energy harvesting is an energy-efficient solution for batteryless Internet of things (IoT). However, ambient backscatter signals are severely faded by dyadic backscatter channel (DBC), limiting connectivity in conventional orthogonal time-division-based AmBC (TD-AmBC). In order to support massive connectivity in AmBC, we propose sparse-coded AmBC (SC-AmBC) based on non-orthogonal signaling. Sparse code utilizes inherent sparsity of AmBC where power supplies of RF tags rely on ambient RF energy harvesting. Conseq…
This paper addresses the problem of outage characterization of an ambient backscatter communication system with a pair of passive tag and reader. In particular, an exact expression for the effective channel distribution is derived. Then, the outage probability at the reader is analyzed rigorously. Since the expression contains an infinite sum, a tight truncation error bound has been derived to facilitate precise numerical evaluations. Furthermore, an asymptotic expression is provided for high signal-to-noise ratio (SNR) regime.
Existing studies about ambient backscatter communication mostly assume flat-fading channels. However, frequency-selective channels widely exist in many practical scenarios. Therefore, this paper investigates ambient backscatter communication systems over frequency-selective channels. In particular, we propose an interference-free transceiver design to facilitate signal detection at the reader. Our design utilizes the cyclic prefix (CP) of orthogonal frequency-division multiplexing (OFDM) source symbols, which can cancel the signal interference and thus enhance the detection accuracy at the rea…
The performance of cooperative ambient backscatter communications (CABC) can be enhanced by employing reconfigurable intelligent surface (RIS) to assist backscatter transmitters. Since the RIS power consumption is a non-negligible issue, we consider a RIS assisted CABC system where the RIS with energy harvesting circuit can not only reflect signal but also harvest wireless energy. We study a transmission design problem to minimize the RIS power consumption with the quality of service constraints for both active and backscatter transmissions. The optimization problem is a mixed-integer non-conv…
Ambient backscatter communications (AmBackComs) have been recognized as a spectrum- and energy-efficient technology for Internet of Things, as it allows passive backscatter devices (BDs) to modulate their information into the legacy signals, e.g., cellular signals, and reflect them to their associated receivers while harvesting energy from the legacy signals to power their circuit operation. {\color{black} However, the co-channel interference between the backscatter link and the legacy link and the non-linear behavior of energy harvesters at the BDs have largely been ignored in the performance…
In this paper, we investigate optimal scheme to manage time scheduling of different modules including spectrum sensing, radio frequency (RF) energy harvesting (RFH) and ambient backscatter communication (ABCom) by maximizing data transmission rate in the internet of things (IoT). We first consider using spectrum sensing with energy detection techniques to detect high power ambient RF signals, and then performing RFH and ABCom with them. Specifically, to improve the spectrum sensing efficiency, compressive sensing is used to detect the wideband RF singals. We propose a joint optimization proble…
In bi-static Ambient Backscatter Communications (AmBC) systems, the direct path from the ambient source to the receiver can be several orders of magnitude stronger than the scattered path modulated by the AmBC device. Because of the large power difference between these two signals, the receiver needs to operate at a large dynamic range. In this paper, we propose a novel analog-digital hybrid null-steering beamformer which allows the backscatter receiver to detect and decode the weak AmBC-modulated signal buried in the strong direct path signals and the noise without requiring the instantaneous…
In this letter, we study the ambient backscatter communication systems over frequency-selective channels. Specifically, we propose an interference-free transceiver design to facilitate signal detection at the reader. Our design utilizes the cyclic prefix (CP) of orthogonal frequency-division multiplexing (OFDM) source symbols, which can cancel the signal interference and thus enhance the detection accuracy at the reader. Meanwhile, our design results in no interference on the existing OFDM communication systems. We also suggest a maximum likelihood (ML) detector for the reader and derive two d…
Ambient backscatter communication (AmBC) enables wireless-powered backscatter devices (BDs) to transmit information over ambient radio-frequency (RF) carriers without using an RF transmitter, and thus has emerged as a promising technology for green Internet-of-Things. This paper considers an AmBC network in which a full-duplex access point (FAP) simultaneously transmits downlink orthogonal frequency division multiplexing (OFDM) signals to its legacy user (LU) and receives uplink signals backscattered from multiple BDs in a time-division-multiple-access manner. To enhance the system performance…
Sixth generation (6G) mobile networks may include new passive technologies, such as ambient backscatter communication or the use of reconfigurable intelligent surfaces, to avoid the emission of waves and the corresponding energy consumption. On the one hand, a reconfigurable intelligent surface improves the network performance by adding electronically controlled reflected paths in the radio propagation channel. On the other hand, in an ambient backscatter system, a device, named tag, communicates towards a reader by backscattering the waves of an ambient source (such as a TV tower). However, t…
We study a novel communication mechanism, ambient backscatter, that utilizes radio frequency (RF) signals transmitted from an ambient source as both energy supply and information carrier to enable communications between low-power devices. Different from existing non-coherent schemes, we here design the semi-coherent detection, where channel parameters can be obtained from unknown data symbols and a few pilot symbols. We first derive the optimal detector for the complex Gaussian ambient RF signal from likelihood ratio test and compute the corresponding closed-form bit error rate (BER). To relea…
One of the key challenges of the Internet of Things (IoT) is to sustainably power the large number of IoT devices in real-time. In this paper, we consider a wireless power transfer (WPT) scenario between an energy transmitter (ET) capable of retrodirective WPT and an energy receiver (ER) capable of ambient backscatter in the presence of an ambient source (AS). The ER requests WPT by backscattering signals from an AS towards the ET, which then retrodirectively beamforms an energy signal towards the ER. To remove the inherent direct-link ambient interference, we propose a scheme of ambient backs…
Ambient backscatter communication (AmBC) enables a passive backscatter device to transmit information to a reader using ambient RF signals, and has emerged as a promising solution to green Internet-of-Things (IoT). Conventional AmBC receivers are interested in recovering the information from the ambient backscatter device (A-BD) only. In this paper, we propose a cooperative AmBC (CABC) system in which the reader recovers information not only from the A-BD, but also from the RF source. We first establish the system model for the CABC system from spread spectrum and spectrum sharing perspectives…
We consider an ambient backscatter communication (AmBC) system aided by an intelligent reflecting surface (IRS). The optimization of the IRS to assist AmBC is extremely difficult when there is no prior channel knowledge, for which no design solutions are currently available. We utilize a deep reinforcement learning-based framework to jointly optimize the IRS and reader beamforming, with no knowledge of the channels or ambient signal. We show that the proposed framework can facilitate effective AmBC communication with a detection performance comparable to several benchmarks under full channel k…
This paper analyzes the maximal achievable rate for a given blocklength and error probability over a multiple-antenna ambient backscatter channel with perfect channel state information at the receiver. The result consists of a finite blocklength channel coding achievability bound and a converse bound based on the Neyman-Pearson test and the normal approximation based on the Berry- Esseen Theorem. Numerical evaluation of these bounds shows fast convergence to the channel capacity as the blocklength increases and also proves that the channel dispersion is an accurate measure of the backoff from …
Ambient backscatter, an emerging green communication technology, has aroused great interest from both academia and industry. One open problem for ambient backscatter communication (AmBC) systems is channel estimation for a massive-antenna reader. In this paper, we focus on channel estimation problem in AmBC systems with uniform linear array (ULA) at the reader which consists of large number of antennas. We first design a two-step method to jointly estimate channel gains and direction of arrivals (DoAs), and then refine the estimates through angular rotation. Additionally, Cramer-Rao lower boun…
In mutualistic cooperative ambient backscatter communications (AmBC), Internet-of-Things (IoT) device sends its information to a desired receiver by modulating and backscattering the primary signal, while providing beneficial multipath diversity to the primary receiver in return, thus forming a mutualism relationship between the AmBC and primary links. We note that the hardware impairments (HIs), which are unavoidable in practical systems and may significantly affect the transmission rates of the primary and AmBC links and their mutualism relationships, have been largely ignored in the study o…
Self-sustainable communications based on advanced energy harvesting technologies have been under rapid development, which facilitate autonomous operation and energy-efficient transmission. Recently, ambient backscattering that leverages existing RF signal resources in the air has been invented to empower data communication among low-power devices. In this paper, we introduce hybrid device-to-device (D2D) communications by integrating ambient backscattering and wireless-powered communications. The hybrid D2D communications are self-sustainable, as no dedicated external power supply is required.…
Multiple-antenna backscatter is emerging as a promising approach to offer high communication performance for the data-intensive applications of ambient backscatter communications (AmBC). Although much has been understood about multiple-antenna backscatter in conventional backscatter communications (CoBC), existing analytical models cannot be directly applied to AmBC due to the structural differences in RF source and tag circuit designs. This paper takes the first step to fill the gap, by exploring the use of spatial modulation (SM) in AmBC whenever tags are equipped with multiple antennas. Spe…
This paper focuses on the non-coherent detection in ambient backscatter communication, which is highly appealing for systems where the trade-off between signaling overhead and the actual data transmission is very critical. Modeling the time-selective fading channel as a first-order autoregressive (AR) process, we propose a new receiver architecture based on the direct averaging of the received signal samples for detection, which departs significantly from the energy averaging-based receivers considered in the literature. For the proposed setup, we characterize the exact asymptotic bit error ra…
Wireless power transfer (WPT) using energy beamforming is a promising solution for low power Internet of Things (IoT) devices. In this work, we consider WPT from an energy transmitter (ET) employing retrodirective WPT using a large phased antenna array to an energy receiver (ER) capable of ambient backscatter. The advantage of retrodirective WPT is that no explicit channel estimation is needed at the ET and the use of ambient backscattering eliminates the need for active transmission at the ER. We propose a training sequence design, i.e., pattern of varying the reflection coefficient at the ER…
In this paper, we consider a new large-scale communication scheme where randomly distributed AmBC nodes are involved as secondary users to primary transmitter (PT) and primary receiver (PR) pairs. The secondary communication between a backscatter transmitter (BT) and a backscatter receiver (BR) is conducted by the BT's reflecting its corresponding PT's signal with different antenna impedances, which introduces additional double fading channels and potential inter-symbol-interference to the primary communications. Thus, at a typical PR, the backscatter signals are regarded as either decodable s…
In the present contribution, we propose a novel opportunistic ambient backscatter communication (ABC) framework for radio frequency (RF)-powered cognitive radio (CR) networks. This framework considers opportunistic spectrum sensing integrated with ABC and harvest-then-transmit (HTT) operation strategies. Novel analytic expressions are derived for the average throughput, the average energy consumption and the energy efficiency in the considered set up. These expressions are represented in closed-form and have a tractable algebraic representation which renders them convenient to handle both anal…
We investigate the reliability and security of the ambient backscatter (AmBC) non-orthogonal multiple access (NOMA) systems, where the source aims to communication with two NOMA users in the presence of an eavesdropper. We consider a more practical case that nodes and backscatter device (BD) suffer from in-phase and quadrature-phase imbalance (IQI). More specifically, exact analytical expressions for the outage probability (OP) and the intercept probability (IP) are derived in closedform. Moreover, the asymptotic behaviors and corresponding diversity orders for the OP are discussed. Numerical …
This paper considers an ambient backscatter communication (AmBC) network in which a full-duplex access point (FAP) simultaneously transmits downlink orthogonal frequency division multiplexing (OFDM) signals to its legacy user (LU) and receives uplink signals backscattered from multiple BDs in a time-division-multiple-access manner. To maximize the system throughput and ensure fairness, we aim to maximize the minimum throughput among all BDs by jointly optimizing the backscatter time and reflection coefficients of the BDs, and the FAP's subcarrier power allocation, subject to the LU's throughpu…
Ambient backscatter communication (AmBC) enables radio-frequency (RF) powered backscatter devices (BDs) (e.g., sensors, tags) to modulate their information bits over ambient RF carriers in an over-the-air manner. This technology also called "modulation in the air", thus has emerged as a promising solution to achieve green communications for future Internet-of-Things. This paper studies an AmBC system by leveraging the ambient orthogonal frequency division multiplexing (OFDM) modulated signals in the air. We first model such AmBC system from a spread-spectrum communication perspective, upon whi…
Channel estimation is a challenging problem for realizing efficient ambient backscatter communication (AmBC) systems. In this letter, channel estimation in AmBC is modeled as a denoising problem and a convolutional neural network-based deep residual learning denoiser (CRLD) is developed to directly recover the channel coefficients from the received noisy pilot signals. To simultaneously exploit the spatial and temporal features of the pilot signals, a novel three-dimension (3D) denoising block is specifically designed to facilitate denoising in CRLD. In addition, we provide theoretical analysi…
In this paper, we study backscatter communication (BC) for power-limited devices that are connected to a network for the Internet of Things (IoT), where joint estimation and detection is carried out at a receiver to detect signals from a backscatter device (BD) with ambient orthogonal frequency division multiplexing (OFDM) carrier. In conventional BC, in order to avoid the difficulty of the carrier estimation, the energy detector is usually considered at a receiver at the cost of poor performance. To improve the performance, in this paper, we consider a novel approach that allows the carrier e…
Symbol Detection in Multi-channel Multi-tag Ambient Backscatter Communication Under IQ Imbalance
Shaanxi Key Laboratory of Information Communication Network and Security, Xi’an University of Posts & Telecommunications（西安邮电大学）；Interdisciplinary Research Center for Communication Systems and Sensing (IRC-CSS), Department of Electrical Engineering, King Fahd University of Petroleum & Minerals (KFUPM)（阿卜杜拉国王科技大学）
The probability density function (pdf) of the received signal of an ambient backscatter communication system is derived, assuming that on-off keying (OOK) is performed at the tag, and that the ambient radio frequency (RF) signal is white Gaussian. The pdf of the received signal is then utilized to design two different types of non-coherent detectors. The first detector directly uses the received signal to perform a hypothesis test. The second detector first estimates the channel based on the observed signal and then performs the hypothesis test. Test statistics and optimal decision threshold o…
Internet-of-Things (IoT) is featured with low-power communications among a massive number of ubiquitously-deployed and energy-constrained electronics, e.g., sensors and actuators. To cope with the demand, wireless-powered cooperative relaying emerges as a promising communication paradigm to extend data transmission coverage and solve energy scarcity for the IoT devices. In this paper, we propose a novel hybrid relaying strategy by combining wireless-powered communication and ambient backscattering functions to improve applicability and performance of data transfer. In particular, the hybrid re…
The success of Internet-of-Things (IoT) paradigm relies on, among other things, developing energy-efficient communication techniques that can enable information exchange among billions of battery-operated IoT devices. With its technological capability of simultaneous information and energy transfer, ambient backscatter is quickly emerging as an appealing solution for this communication paradigm, especially for the links with low data rate requirement. In this paper, we study signal detection and characterize exact bit error rate for the ambient backscatter system. In particular, we formulate a…
Ambient backscatter communication (AmBC) leverages the existing ambient radio frequency (RF) environment to implement communication with battery-free devices. One critical challenge of AmBC systems is signal recovery because the transmitted information bits are embedded in the ambient RF signals and these are unknown and uncontrollable. To address this problem, most existing approaches use averaging-based energy detectors and consequently the data rate is low and there is an error floor. Here we propose a new detection strategy based on the ratio between signals received from a multiple-antenn…
Non-orthogonal multiple access (NOMA) and ambient backscatter communication have been envisioned as two promising technologies for the Internet-of-things due to their high spectral efficiency and energy efficiency. Motivated by this fact, we consider an ambient backscatter NOMA system in the presence of a malicious eavesdropper. Under some realistic assumptions of residual hardware impairments (RHIs), channel estimation errors (CEEs) and imperfect successive interference cancellation (ipSIC), we investigate the physical layer security (PLS) of the ambient backscatter NOMA systems focusing on r…
In this paper, we present an ambient backscatters-friendly 5G network that creates locations with large power (hot spots) for tags and good reception locations (quiet spots or coherent spots) for readers. The massive multiple input multiple output (M-MIMO) antenna and beamforming capability of the 5G network is used as follows. In a first step, a training device (separate from tags and readers) is used to send pilots and train the 5G network to perform focusing and/or nulling onto marked locations. In a second step, tags and readers are positioned onto the marked locations. The robustness of M…
Ambient backscatter communications have been identified for ultra-low energy wireless communications. Indeed, a tag can send a message to a reader without emitting any wave and without battery, simply by backscattering the waves generated by a source. In the simplest implementation of such a system, the tag sends a binary message by oscillating between two states and the reader detects the bits by comparing the two distinct received powers. In this paper, for the first time, we propose to study an ambient backscatter communication system, in the presence of a diffusing surface, a simple flat p…
Tag signal detection is one of the key tasks in ambient backscatter communication (AmBC) systems. However, obtaining perfect channel state information (CSI) is challenging and costly, which makes AmBC systems suffer from a high bit error rate (BER). To eliminate the requirement of channel estimation and to improve the system performance, in this paper, we adopt a deep transfer learning (DTL) approach to implicitly extract the features of channel and directly recover tag symbols. To this end, we develop a DTL detection framework which consists of offline learning, transfer learning, and online …
Spectrum sharing backscatter communication systems are among the most prominent technologies for ultralow power and spectrum efficient communications. In this paper, we propose an underlay spectrum sharing backscatter communication system, in which the secondary network is a backscatter communication system. We analyze the performance of the secondary network under a transmit power adaption strategy at the secondary transmitter, which guarantees that the interference caused by the secondary network to the primary receiver is below a predetermined threshold. We first derive a novel analytical e…
Existing tag signal detection algorithms inevitably suffer from a high bit error rate (BER) due to the difficulties in estimating the channel state information (CSI). To eliminate the requirement of channel estimation and to improve the system performance, in this paper, we adopt a deep transfer learning (DTL) approach to implicitly extract the features of communication channel and directly recover tag symbols. Inspired by the powerful capability of convolutional neural networks (CNN) in exploring the features of data in a matrix form, we design a novel covariance matrix aware neural network (…
Symbiotic radio (SR) networks are possible solutions to the future low-power wireless communications for massive Internet of Things devices. In this paper, we investigate a multiple-input-single-output non-orthogonal multiple access (NOMA) backscatter device (BD) aided SR network with a potential eavesdropper. In the network, a base station (BS) broadcasts signals to a central user and a cell-edge user using the NOMA protocol. With ambient backscatter modulation, the BD transmits its own messages to the central user over incident signals from the BS. We propose a constrained concave convex pro…
Symbiotic radio (SR) backscatter systems are possible techniques for the future low-power wireless communications for Internet of Things devices. In this paper, we propose a multiple-input-multiple-output (MIMO) SR backscatter system, where the secondary multi-antenna transmission from the backscatter device (BD) to the receiver is riding on the primary multi-antenna transmission from the transmitter to the receiver. We investigate the beamforming design optimization problem which maximizes the achievable rate of secondary transmission under the achievable rate constraint of primary transmissi…
With the emerging Internet-of-Things services, massive machine-to-machine (M2M) communication will be deployed on top of human-to-human (H2H) communication in the near future. Due to the coexistence of M2M and H2H communications, the performance of M2M (i.e., secondary) network depends largely on the H2H (i.e., primary) network. In this paper, we propose ambient backscatter communication for the M2M network which exploits the energy (signal) sources of the H2H network, referring to traffic applications and popularity. In order to maximize the harvesting and transmission opportunities offered b…
