We study two variants of \textsc{Maximum Cut}, which we call \textsc{Connected Maximum Cut} and \textsc{Maximum Minimal Cut}, in this paper. In these problems, given an unweighted graph, the goal is to compute a maximum cut satisfying some connectivity requirements. Both problems are known to be NP-complete even on planar graphs whereas \textsc{Maximum Cut} on planar graphs is solvable in polynomial time. We first show that these problems are NP-complete even on planar bipartite graphs and split graphs. Then we give parameterized algorithms using graph parameters such as clique-width, tree-width, and twin-cover number. Finally, we obtain FPT algorithms with respect to the solution size.
The complexity of problems involving global constraints is usually much more difficult to understand than the complexity of problems only involving local constraints. A natural form of global constraints are connectivity constraints. We study connectivity problems from a fine-grained parameterized perspective. In a breakthrough, Cygan et al. (TALG 2022) first obtained algorithms with single-exponential running time c^{tw} n^O(1) for connectivity problems parameterized by treewidth by introducing the cut-and-count-technique. Furthermore, the obtained bases c were shown to be optimal under the S…
We investigate parameterized algorithms for the NP-hard problem Min-Power Asymmetric Connectivity (MinPAC) that has applications in wireless sensor networks. Given a directed arc-weighted graph, MinPAC asks for a strongly connected spanning subgraph minimizing the summed vertex costs. Here, the cost of each vertex is the weight of its heaviest outgoing arc in the chosen subgraph. We present linear-time algorithms for the cases where the number of strongly connected components in a so-called obligatory subgraph or the feedback edge number in the underlying undirected graph is constant. Compleme…
A graph $G$ is $k$-out-connected from its node $s$ if it contains $k$ internally disjoint $sv$-paths to every node $v$; $G$ is $k$-connected if it is $k$-out-connected from every node. In connectivity augmentation problems the goal is to augment a graph $G_0=(V,E_0)$ by a minimum costs edge set $J$ such that $G_0 \cup J$ has higher connectivity than $G_0$. In the $k$-Out-Connectivity Augmentation ($k$-OCA) problem, $G_0$ is $(k-1)$-out-connected from $s$ and $G_0 \cup J$ should be $k$-out-connected from $s$; in the $k$-Connectivity Augmentation ($k$-CA) problem $G_0$ is $(k-1)$-connected and $…
We study connectivity problems from a fine-grained parameterized perspective. Cygan et al. (TALG 2022) obtained algorithms with single-exponential running time $α^{tw} n^{O(1)}$ for connectivity problems parameterized by treewidth ($tw$) by introducing the cut-and-count-technique, which reduces connectivity problems to locally checkable counting problems. In addition, the bases $α$ were proven to be optimal assuming the Strong Exponential-Time Hypothesis (SETH). As only sparse graphs may admit small treewidth, these results do not apply to graphs with dense structure. A well-known tool to capt…
We study the parameterized complexity of separating a small set of vertices from a graph by a small vertex-separator. That is, given a graph $G$ and integers $k$, $t$, the task is to find a vertex set $X$ with $|X| \le k$ and $|N(X)| \le t$. We show that - the problem is fixed-parameter tractable (FPT) when parameterized by $t$ but W[1]-hard when parameterized by $k$, and - a terminal variant of the problem, where $X$ must contain a given vertex $s$, is W[1]-hard when parameterized either by $k$ or by $t$ alone, but is FPT when parameterized by $k + t$. We also show that if we consider edge cu…
We show that the Minimal Length-Bounded L-But problem can be computed in linear time with respect to L and the tree-width of the input graph as parameters. In this problem the task is to find a set of edges of a graph such that after removal of this set, the shortest path between two prescribed vertices is at least L long. We derive an FPT algorithm for a more general multi-commodity length bounded cut problem when parameterized by the number of terminals also. For the former problem we show a W[1]-hardness result when the parameterization is done by the path-width only (instead of the tree-wi…
In this paper we consider two above lower bound parameterizations of the Node Multiway Cut problem - above the maximum separating cut and above a natural LP-relaxation - and prove them to be fixed-parameter tractable. Our results imply O*(4^k) algorithms for Vertex Cover above Maximum Matching and Almost 2-SAT as well as an O*(2^k) algorithm for Node Multiway Cut with a standard parameterization by the solution size, improving previous bounds for these problems.
Li and Panigrahi, in recent work, obtained the first deterministic algorithm for the global minimum cut of a weighted undirected graph that runs in time $o(mn)$. They introduced an elegant and powerful technique to find isolating cuts for a terminal set in a graph via a small number of $s$-$t$ minimum cut computations. In this paper we generalize their isolating cut approach to the abstract setting of symmetric bisubmodular functions (which also capture symmetric submodular functions). Our generalization to bisubmodularity is motivated by applications to element connectivity and vertex connect…
A breakthrough result of Cygan et al. (FOCS 2011) showed that connectivity problems parameterized by treewidth can be solved much faster than the previously best known time $\mathcal{O}^*(2^{\mathcal{O}(tw \log(tw))})$. Using their inspired Cut\&Count technique, they obtained $\mathcal{O}^*(α^{tw})$ time algorithms for many such problems. Moreover, they proved these running times to be optimal assuming the Strong Exponential-Time Hypothesis. Unfortunately, like other dynamic programming algorithms on tree decompositions, these algorithms also require exponential space, and this is widely belie…
We study the parameterized complexity of a robust generalization of the classical Feedback Vertex Set problem, namely the Group Feedback Vertex Set problem; we are given a graph G with edges labeled with group elements, and the goal is to compute the smallest set of vertices that hits all cycles of G that evaluate to a non-null element of the group. This problem generalizes not only Feedback Vertex Set, but also Subset Feedback Vertex Set, Multiway Cut and Odd Cycle Transversal. Completing the results of Guillemot [Discr. Opt. 2011], we provide a fixed-parameter algorithm for the parameterizat…
Given an undirected graph $G$, a collection $\{(s_1,t_1),..., (s_k,t_k)\}$ of pairs of vertices, and an integer $p$, the Edge Multicut problem ask if there is a set $S$ of at most $p$ edges such that the removal of $S$ disconnects every $s_i$ from the corresponding $t_i$. Vertex Multicut is the analogous problem where $S$ is a set of at most $p$ vertices. Our main result is that both problems can be solved in time $2^{O(p^3)}... n^{O(1)}$, i.e., fixed-parameter tractable parameterized by the size $p$ of the cutset in the solution. By contrast, it is unlikely that an algorithm with running time…
Given a graph $G=(V,E)$, capacities $w(e)$ on edges, and a subset of terminals $\mathcal{T} \subseteq V: |\mathcal{T}| = k$, a mimicking network for $(G,\mathcal{T})$ is a graph $(H,w')$ that contains copies of $\mathcal{T}$ and preserves the value of minimum cuts separating any subset $A, B \subseteq \mathcal{T}$ of terminals. Mimicking networks of size $2^{2^k}$ are known to exist and can be constructed algorithmically, while the best known lower bound is $2^{Ω(k)}$; therefore, an exponential size is required if one aims at preserving cuts exactly. In this paper, we study mimicking networks …
The Secluded Path problem models a situation where a sensitive information has to be transmitted between a pair of nodes along a path in a network. The measure of the quality of a selected path is its exposure, which is the total weight of vertices in its closed neighborhood. In order to minimize the risk of intercepting the information, we are interested in selecting a secluded path, i.e. a path with a small exposure. Similarly, the Secluded Steiner Tree problem is to find a tree in a graph connecting a given set of terminals such that the exposure of the tree is minimized. The problems were …
We give an algorithm for augmenting the edge connectivity of an undirected graph by using the isolating cuts framework (Li and Panigrahi, FOCS '20). Our algorithm uses poly-logarithmic calls to any max-flow algorithm, which yields a running time of $\tilde O(m + n^{3/2})$ and improves on the previous best time of $\tilde O(n^2)$ (Benczúr and Karger, SODA '98) for this problem. We also obtain an identical improvement in the running time of the closely related edge splitting off problem in undirected graphs.
We consider approximations for computing minimum weighted cuts in directed graphs. We consider both rooted and global minimum cuts, and both edge-cuts and vertex-cuts. For these problems we give randomized Monte Carlo algorithms that compute a $(1+ε)$-approximate minimum cut in $\tilde{O}(n^2 / ε^2)$ time. These results extend and build on recent work [4] that obtained exact algorithms with similar running times in directed graphs with small integer capacities.
In this paper, we study a generalization of the classical minimum cut prob- lem, called Connectivity Preserving Minimum Cut (CPMC) problem, which seeks a minimum cut to separate a pair (or pairs) of source and destination nodes and meanwhile ensure the connectivity between the source and its partner node(s). The CPMC problem is a rather powerful formulation for a set of problems and finds applications in many other areas, such as network security, image processing, data mining, pattern recognition, and machine learning. For this important problem, we consider two variants, connectiv- ity prese…
The notion of forbidden-transition graphs allows for a robust generalization of walks in graphs. In a forbidden-transition graph, every pair of edges incident to a common vertex is permitted or forbidden; a walk is compatible if all pairs of consecutive edges on the walk are permitted. Forbidden-transition graphs and related models have found applications in a variety of fields, such as routing in optical telecommunication networks, road networks, and bio-informatics. We initiate the study of fundamental connectivity problems from the point of view of parameterized complexity, including an in-…
In this work we start the investigation of tight complexity bounds for connectivity problems parameterized by cutwidth assuming the Strong Exponential-Time Hypothesis (SETH). Van Geffen et al. posed this question for odd cycle transversal and feedback vertex set. We answer it for these two and four further problems, namely connected vertex cover, connected domintaing set, steiner tree, and connected odd cycle transversal. For the latter two problems it sufficed to prove lower bounds that match the running time inherited from parameterization by treewidth; for the others we provide faster algor…
The recently introduced graph parameter tree-cut width plays a similar role with respect to immersions as the graph parameter treewidth plays with respect to minors. In this paper, we provide the first algorithmic applications of tree-cut width to hard combinatorial problems. Tree-cut width is known to be lower-bounded by a function of treewidth, but it can be much larger and hence has the potential to facilitate the efficient solution of problems that are not known to be fixed-parameter tractable (FPT) when parameterized by treewidth. We introduce the notion of nice tree-cut decompositions an…
For the vast majority of local graph problems standard dynamic programming techniques give c^tw V^O(1) algorithms, where tw is the treewidth of the input graph. On the other hand, for problems with a global requirement (usually connectivity) the best-known algorithms were naive dynamic programming schemes running in tw^O(tw) V^O(1) time. We breach this gap by introducing a technique we dubbed Cut&Count that allows to produce c^tw V^O(1) Monte Carlo algorithms for most connectivity-type problems, including Hamiltonian Path, Feedback Vertex Set and Connected Dominating Set, consequently answerin…
Consider the following "local" cut-detection problem in a directed graph: We are given a starting vertex $s$ and need to detect whether there is a cut with at most $k$ edges crossing the cut such that the side of the cut containing $s$ has at most $Δ$ interior edges. If we are given query access to the input graph, then this problem can in principle be solved in sublinear time without reading the whole graph and with query complexity depending on $k$ and $Δ$. We design an elegant randomized procedure that solves a slack variant of this problem with $O(k^2 Δ)$ queries, improving in particular a…
We consider the graph $k$-partitioning problem under the min-max objective, termed as Minmax $k$-cut. The input here is a graph $G=(V,E)$ with non-negative edge weights $w:E\rightarrow \mathbb{R}_+$ and an integer $k\geq 2$ and the goal is to partition the vertices into $k$ non-empty parts $V_1, \ldots, V_k$ so as to minimize $\max_{i=1}^k w(δ(V_i))$. Although minimizing the sum objective $\sum_{i=1}^k w(δ(V_i))$, termed as Minsum $k$-cut, has been studied extensively in the literature, very little is known about minimizing the max objective. We initiate the study of Minmax $k$-cut by showing …
We study a number of multi-route cut problems: given a graph G=(V,E) and connectivity thresholds k_(u,v) on pairs of nodes, the goal is to find a minimum cost set of edges or vertices the removal of which reduces the connectivity between every pair (u,v) to strictly below its given threshold. These problems arise in the context of reliability in communication networks; They are natural generalizations of traditional minimum cut problems where the thresholds are either 1 (we want to completely separate the pair) or infinity (we don't care about the connectivity for the pair). We provide the fir…
We introduce a novel approach of using important cuts which allowed us to design significantly faster fixed-parameter tractable (FPT) algorithms for the following routing problems: the Mixed Chinese Postman Problem parameterized by the number of directed edges (Gutin et al., JCSS 2017), the Minimum Shared Edges problem (MSE) parameterized by the number p of paths between two specified vertices (Fluschnik et al., JCSS 2019), and the Weighted Min Cut Prevention problem (Gruttemeier et al., WG 2021). The Minimum Vulnerability problem (MV) is a generalization of MSE (Assadi et al., Algorithmica 20…
We study several problems related to graph modification problems under connectivity constraints from the perspective of parameterized complexity: {\sc (Weighted) Biconnectivity Deletion}, where we are tasked with deleting~$k$ edges while preserving biconnectivity in an undirected graph, {\sc Vertex-deletion Preserving Strong Connectivity}, where we want to maintain strong connectivity of a digraph while deleting exactly~$k$ vertices, and {\sc Path-contraction Preserving Strong Connectivity}, in which the operation of path contraction on arcs is used instead. The parameterized tractability of t…
Given a directed graph $G$, a set of $k$ terminals and an integer $p$, the \textsc{Directed Vertex Multiway Cut} problem asks if there is a set $S$ of at most $p$ (nonterminal) vertices whose removal disconnects each terminal from all other terminals. \textsc{Directed Edge Multiway Cut} is the analogous problem where $S$ is a set of at most $p$ edges. These two problems indeed are known to be equivalent. A natural generalization of the multiway cut is the \emph{multicut} problem, in which we want to disconnect only a set of $k$ given pairs instead of all pairs. Marx (Theor. Comp. Sci. 2006) sh…
We study the \emph{multiterminal cut} problem, which, given an $n$-vertex graph whose edges are integer-weighted and a set of terminals, asks for a partition of the vertex set such that each terminal is in a distinct part, and the total weight of crossing edges is at most $k$. Our weapons shall be two classical results known for decades: \emph{maximum volume minimum ($s,t$)-cuts} by [Ford and Fulkerson, \emph{Flows in Networks}, 1962] and \emph{isolating cuts} by [Dahlhaus et al., \emph{SIAM J. Comp.} 23(4):864-894, 1994]. We sharpen these old weapons with the help of submodular functions, and…
For the well-known Survivable Network Design Problem (SNDP) we are given an undirected graph $G$ with edge costs, a set $R$ of terminal vertices, and an integer demand $d_{s,t}$ for every terminal pair $s,t\in R$. The task is to compute a subgraph $H$ of $G$ of minimum cost, such that there are at least $d_{s,t}$ disjoint paths between $s$ and $t$ in $H$. If the paths are required to be edge-disjoint we obtain the edge-connectivity variant (EC-SNDP), while internally vertex-disjoint paths result in the vertex-connectivity variant (VC-SNDP). Another important case is the element-connectivity va…
We study the boundary of tractability for the Max-Cut problem in graphs. Our main result shows that Max-Cut above the Edwards-Erdős bound is fixed-parameter tractable: we give an algorithm that for any connected graph with n vertices and m edges finds a cut of size m/2 + (n-1)/4 + k in time 2^O(k)n^4, or decides that no such cut exists. This answers a long-standing open question from parameterized complexity that has been posed several times over the past 15 years. Our algorithm is asymptotically optimal, under the Exponential Time Hypothesis, and is strengthened by a polynomial-time computabl…
In the Min $k$-Cut problem, input is an edge weighted graph $G$ and an integer $k$, and the task is to partition the vertex set into $k$ non-empty sets, such that the total weight of the edges with endpoints in different parts is minimized. When $k$ is part of the input, the problem is NP-complete and hard to approximate within any factor less than $2$. Recently, the problem has received significant attention from the perspective of parameterized approximation. Gupta et al.~[SODA 2018] initiated the study of FPT-approximation for the Min $k$-Cut problem and gave an $1.9997$-approximation algor…
We consider connectivity-augmentation problems in a setting where each potential new edge has a nonnegative cost associated with it, and the task is to achieve a certain connectivity target with at most p new edges of minimum total cost. The main result is that the minimum cost augmentation of edge-connectivity from k-1 to k with at most p new edges is fixed-parameter tractable parameterized by p and admits a polynomial kernel. We also prove the fixed-parameter tractability of increasing edge-connectivity from 0 to 2, and increasing node-connectivity from 1 to 2.
We study the problem Symmetric Directed Multicut from a parameterized complexity perspective. In this problem, the input is a digraph $D$, a set of cut requests $C=\{(s_1,t_1),\ldots,(s_\ell,t_\ell)\}$ and an integer $k$, and the task is to find a set $X \subseteq V(D)$ of size at most $k$ such that for every $1 \leq i \leq \ell$, $X$ intersects either all $(s_i,t_i)$-paths or all $(t_i,s_i)$-paths. Equivalently, every strongly connected component of $D-X$ contains at most one vertex out of $s_i$ and $t_i$ for every $i$. This problem is previously known from research in approximation algorithm…
An enumeration kernel as defined by Creignou et al. [Theory Comput. Syst. 2017] for a parameterized enumeration problem consists of an algorithm that transforms each instance into one whose size is bounded by the parameter plus a solution-lifting algorithm that efficiently enumerates all solutions from the set of the solutions of the kernel. We propose to consider two new versions of enumeration kernels by asking that the solutions of the original instance can be enumerated in polynomial time or with polynomial delay from the kernel solutions. Using the NP-hard Matching Cut problem parameteriz…
The classical Menger's theorem states that in any undirected (or directed) graph $G$, given a pair of vertices $s$ and $t$, the maximum number of vertex (edge) disjoint paths is equal to the minimum number of vertices (edges) needed to disconnect from $s$ and $t$. This min-max result can be turned into a polynomial time algorithm to find the maximum number of vertex (edge) disjoint paths as well as the minimum number of vertices (edges) needed to disconnect $s$ from $t$. In this paper we study a mixed version of this problem, called Mixed-Cut, where we are given an undirected graph $G$, vertic…
In this paper, we present new incremental algorithms for maintaining data structures that represent all connectivity cuts of size one in directed graphs (digraphs), and the strongly connected components that result by the removal of each of those cuts. We give a conditional lower bound that provides evidence that our algorithms may be tight up to sub-polynomial factors. As an additional result, with our approach we can also maintain dynamically the $2$-vertex-connected components of a digraph during any sequence of edge insertions in a total of $O(mn)$ time. This matches the bounds for the inc…
Given an edge-weighted graph $G$ on $n$ nodes, the NP-hard Max-Cut problem asks for a node bipartition such that the sum of edge weights joining the different partitions is maximized. We propose a fixed-parameter tractable algorithm parameterized by the number $k$ of crossings in a given drawing of $G$. Our algorithm achieves a running time of $O(2^k \cdot p(n + k))$, where $p$ is the polynomial running time for planar Max-Cut. The only previously known similar algorithm [8] is restricted to 1-planar graphs (i.e., at most one crossing per edge) and its dependency on $k$ is of order $3^k$ . A d…
The field of kernelization studies polynomial-time preprocessing routines for hard problems in the framework of parameterized complexity. Although a framework for proving kernelization lower bounds has been discovered in 2008 and successfully applied multiple times over the last three years, establishing kernelization complexity of many important problems remains open. In this paper we show that, unless NP is a subset of coNP/poly and the polynomial hierarchy collapses up to its third level, the following parameterized problems do not admit a polynomial-time preprocessing algorithm that reduce…
We consider the classical Minimum Balanced Cut problem: given a graph $G$, compute a partition of its vertices into two subsets of roughly equal volume, while minimizing the number of edges connecting the subsets. We present the first {\em deterministic, almost-linear time} approximation algorithm for this problem. Specifically, our algorithm, given an $n$-vertex $m$-edge graph $G$ and any parameter $1\leq r\leq O(\log n)$, computes a $(\log m)^{r^2}$-approximation for Minimum Balanced Cut on $G$, in time $O\left ( m^{1+O(1/r)+o(1)}\cdot (\log m)^{O(r^2)}\right )$. In particular, we obtain a $…
For some years it was believed that for "connectivity" problems such as Hamiltonian Cycle, algorithms running in time 2^{O(tw)}n^{O(1)} -called single-exponential- existed only on planar and other sparse graph classes, where tw stands for the treewidth of the n-vertex input graph. This was recently disproved by Cygan et al. [FOCS 2011], Bodlaender et al. [ICALP 2013], and Fomin et al. [SODA 2014], who provided single-exponential algorithms on general graphs for essentially all connectivity problems that were known to be solvable in single-exponential time on sparse graphs. In this article we f…
We investigate the parameterized complexity in $a$ and $b$ of determining whether a graph~$G$ has a subset of $a$ vertices and $b$ edges whose removal disconnects $G$, or disconnects two prescribed vertices $s, t \in V(G)$.
(see paper for full abstract) Cut problems and connectivity problems on digraphs are two well-studied classes of problems from the viewpoint of parameterized complexity. After a series of papers over the last decade, we now have (almost) tight bounds for the running time of several standard variants of these problems parameterized by two parameters: the number $k$ of terminals and the size $p$ of the solution. When there is evidence of FPT intractability, then the next natural alternative is to consider FPT approximations. In this paper, we show two types of results for several directed cut an…
Consider the following "local" cut-detection problem in a directed graph: We are given a seed vertex $x$ and need to remove at most $k$ edges so that at most $ν$ edges can be reached from $x$ (a "local" cut) or output $\bot$ to indicate that no such cut exists. If we are given query access to the input graph, then this problem can in principle be solved without reading the whole graph and with query complexity depending on $k$ and $ν$. In this paper we consider a slack variant of this problem where, when such a cut exists, we can output a cut with up to $O(kν)$ edges reachable from $x$. We pre…
In the recent years we have witnessed a rapid development of new algorithmic techniques for parameterized algorithms for graph separation problems. We present experimental evaluation of two cornerstone theoretical results in this area: linear-time branching algorithms guided by half-integral relaxations and kernelization (preprocessing) routines based on representative sets in matroids. A side contribution is a new set of benchmark instances of (unweighted, vertex-deletion) Multiway Cut.
We consider the following natural graph cut problem called Critical Node Cut (CNC): Given a graph $G$ on $n$ vertices, and two positive integers $k$ and $x$, determine whether $G$ has a set of $k$ vertices whose removal leaves $G$ with at most $x$ connected pairs of vertices. We analyze this problem in the framework of parameterized complexity. That is, we are interested in whether or not this problem is solvable in $f(κ) \cdot n^{O(1)}$ time (i.e., whether or not it is fixed-parameter tractable), for various natural parameters $κ$. We consider four such parameters: - The size $k$ of the requi…
The Max-Cut problem is known to be NP-hard on general graphs, while it can be solved in polynomial time on planar graphs. In this paper, we present a fixed-parameter tractable algorithm for the problem on `almost' planar graphs: Given an $n$-vertex graph and its drawing with $k$ crossings, our algorithm runs in time $O(2^k(n+k)^{3/2} \log (n + k))$. Previously, Dahn, Kriege and Mutzel (IWOCA 2018) obtained an algorithm that, given an $n$-vertex graph and its $1$-planar drawing with $k$ crossings, runs in time $O(3^k n^{3/2} \log n)$. Our result simultaneously improves the running time and remo…
We revisit classical connectivity problems in the CONGEST model of distributed computing. By using techniques from fault tolerant network design, we show improved constructions, some of which are even "local" (i.e., with $\widetilde{O}(1)$ rounds) for problems that are closely related to hard global problems (i.e., with a lower bound of $Ω(Diam+\sqrt{n})$ rounds). Our main results are: (1) For $D$-diameter unweighted graphs with constant edge connectivity, we show an exact distributed deterministic computation of the minimum cut in $poly(D)$ rounds. This resolves one the open problems recently…
We design an algorithm for computing connectivity in hypergraphs which runs in time $\hat O_r(p + \min\{λ^{\frac{r-3}{r-1}} n^2, n^r/λ^{r/(r-1)}\})$ (the $\hat O_r(\cdot)$ hides the terms subpolynomial in the main parameter and terms that depend only on $r$) where $p$ is the size, $n$ is the number of vertices, and $r$ is the rank of the hypergraph. Our algorithm is faster than existing algorithms when the the rank is constant and the connectivity $λ$ is $ω(1)$. At the heart of our algorithm is a structural result regarding min-cuts in simple hypergraphs. We show a trade-off between the number…
We study the {\sc multicut on trees} and the {\sc generalized multiway Cut on trees} problems. For the {\sc multicut on trees} problem, we present a parameterized algorithm that runs in time $O^{*}(ρ^k)$, where $ρ= \sqrt{\sqrt{2} + 1} \approx 1.555$ is the positive root of the polynomial $x^4-2x^2-1$. This improves the current-best algorithm of Chen et al. that runs in time $O^{*}(1.619^k)$. For the {\sc generalized multiway cut on trees} problem, we show that this problem is solvable in polynomial time if the number of terminal sets is fixed; this answers an open question posed in a recent pa…
It is well known that many local graph problems, like Vertex Cover and Dominating Set, can be solved in 2^{O(tw)}|V|^{O(1)} time for graphs G=(V,E) with a given tree decomposition of width tw. However, for nonlocal problems, like the fundamental class of connectivity problems, for a long time we did not know how to do this faster than tw^{O(tw)}|V|^{O(1)}. Recently, Cygan et al. (FOCS 2011) presented Monte Carlo algorithms for a wide range of connectivity problems running in time $c^{tw}|V|^{O(1)} for a small constant c, e.g., for Hamiltonian Cycle and Steiner tree. Naturally, this raises the …
Decompositional parameters such as treewidth are commonly used to obtain fixed-parameter algorithms for NP-hard graph problems. For problems that are W[1]-hard parameterized by treewidth, a natural alternative would be to use a suitable analogue of treewidth that is based on edge cuts instead of vertex separators. While tree-cut width has been coined as such an analogue of treewidth for edge cuts, its algorithmic applications have often led to disappointing results: out of twelve problems where one would hope for fixed-parameter tractability parameterized by an edge-cut based analogue to treew…
We study the problem of computing a minimum cut in a simple, undirected graph and give a deterministic $O(m \log^2 n \log\log^2 n)$ time algorithm. This improves both on the best previously known deterministic running time of $O(m \log^{12} n)$ (Kawarabayashi and Thorup, STOC 2015) and the best previously known randomized running time of $O(m \log^{3} n)$ (Karger, J.ACM 2000) for this problem, though Karger's algorithm can be further applied to weighted graphs. Moreover, our result extends to balanced directed graphs, where the balance of a directed graph captures how close the graph is to bei…
