This paper presents a method for continuous indoor-outdoor environment detection on mobile devices based solely on WiFi fingerprints. Detection of indoor outdoor switching is an important part of identifying a user's context, and it provides important information for upper layer context aware mobile applications such as recommender systems, navigation tools, etc. Moreover, future indoor positioning systems are likely to use Wi-Fi fingerprints, and therefore Wi-Fi receivers will be on most of the time. In contrast to existing research, we believe that these fingerprints should be leveraged, and they serve as the basis of the proposed method. Using various machine learning algorithms, we train a supervised classifier based on features extracted from the raw fingerprints, clusters, and cluster transition graph. The contribution of each of the features to the method is assessed. Our method assumes no prior knowledge of the environment, and a training set consisting of the data collected for just a few hours on a single device is sufficient in order to provide indoor-outdoor classification, even in an unknown location or when using new devices. We evaluate our method in an experiment involving 12 participants during their daily routine, with a total of 828 hours' worth of data collected by the participants. We report a predictive performance of the AUC (area under the curve) of 0.94 using the gradient boosting machine ensemble learning method. We show that our method can be used for other context detection tasks such as learning and recognizing a given building or room.
In the upcoming 5G communication, the millimeter-wave (mmWave) technology will play an important role due to its large bandwidth and high data rate. However, mmWave frequencies have higher free-space path loss (FSPL) in line-of-sight (LOS) propagation compared to the currently used sub-6 GHz frequencies. What is more, in non-line-of-sight (NLOS) propagation, the attenuation of mmWave is larger compared to the lower frequencies, which can seriously degrade the performance. It is therefore necessary to investigate mmWave propagation characteristics for a given deployment scenario to understand c…
In this paper, we investigate an outdoor and indoor wireless communication network with the assistance of a novel relay-aided double-sided reconfigurable intelligent surface (RIS). A scheduling problem is considered at the outdoor access point (AP) to minimize the sum of age of information (AoI). To serve the indoor users and further enhance the wireless link quality, a novel double-sided RIS with relay is utilized. Since the formulated problem is non-convex with highly-coupled variables, a successive convex approximation (SCA) based alternating optimization (AO) algorithm is proposed to solve…
In the US, people spend 87% of their time indoors and have an average of four connected devices per person (in 2020). As such, providing indoor coverage has always been a challenge but becomes even more difficult as carrier frequencies increase to mmWave and beyond. This paper investigates the outdoor and outdoor-indoor coverage of an urban network comparing globally standardized building penetration models and implementing models to corresponding scenarios. The glass used in windows of buildings in the grid plays a pivotal role in determining the outdoor-to-indoor propagation loss. For 28 GHz…
In this paper, two large-scale fading path loss models are presented based on indoor and outdoor channel measurements at 73 GHz. The line-of-sight millimeter-wave propagation measurement campaigns were uniquely conducted within the indoor and outdoor environments at an airport setting, i.e., the Boise Airport. The channel measurements were made with directional transmit and receive antennas with a 24 dBi gain at different receive antenna heights. From the measured data, we obtained the parameters of two path loss models, i.e., the close-in reference distance model (CIM) and the floating-interc…
In this paper, we consider a heterogeneous 5G cellular architecture that separates the outdoor and indoor scenarios and in particular study the trade-off between the spectrum efficiency (SE), energy efficiency (EE), economy efficiency (ECE). Mathematical expressions for the system capacity, EE, SE, and ECE respectively are derived using a proposed realistic power consumption model. The comparison of system performance in terms of SE, EE, and ECE, results in the observation that the proposed network architecture, which separates the outdoor and indoor scenarios, offers a promising solution for …
In this paper, we present millimeter-wave (mmWave) penetration loss measurements and analysis at E-bands-73 GHz and 81 GHz. Penetration loss was measured for common building materials such as clear glass, metal, tinted glass, wood, and drywall on the campus of Boise State University in the city of Boise. A horn antenna with a gain of 24 dBi was used at the transmitter and receiver at both bands, and both antennas were boresight-aligned with respect to the test material. A total of twelve locations were selected to test five materials. We tested two indoor materials (clear glass and wood) in at…
Precise indoor localization is one of the key requirements for fifth Generation (5G) and beyond, concerning various wireless communication systems, whose applications span different vertical sectors. Although many highly accurate methods based on signal fingerprints have been lately proposed for localization, their vast majority faces the problem of degrading performance when deployed in indoor systems, where the propagation environment changes rapidly. In order to address this issue, the crowdsourcing approach has been adopted, according to which the fingerprints are frequently updated in the…
Simultaneously transmitting (refracting) and reflecting reconfigurable intelligent surfaces (STAR-RISs) have been recently identified to improve the spectrum/energy efficiency and extend the communication range. However, their potential for enhanced concurrent indoor and outdoor localization has not yet been explored. In this paper, we study the fundamental limits, i.e., the Cramér Rao lower bounds (CRLBs) via Fisher information analyses, on the three-dimensional (3D) localization performance with a STAR-RIS at millimeter wave frequencies. The effect of the power splitting between refraction a…
In recent years, fingerprint-based positioning has gained researchers attention since it is a promising alternative to the Global Navigation Satellite System and cellular network-based localization in urban areas. Despite this, the lack of publicly available datasets that researchers can use to develop, evaluate, and compare fingerprint-based positioning solutions constitutes a high entry barrier for studies. As an effort to overcome this barrier and foster new research efforts, this paper presents OutFin, a novel dataset of outdoor location fingerprints that were collected using two different…
WiFi-based indoor localization has received extensive attentions from both academia and industry. However, the overhead of constructing and maintaining the WiFi fingerprint map remains a bottleneck for the wide-deployment of WiFi-based indoor localization systems. Recently, robots are adopted as the professional surveyor to fingerprint the environment autonomously. But the time and energy cost still limit the coverage of the robot surveyor, thus reduce its scalability. To fill this need, we design an AutonomousWiFi Fingerprinting system, called AuF, which autonomously constructs the fingerprin…
Outdoor positioning systems based on the Global Navigation Satellite System have several shortcomings that have deemed their use for indoor positioning impractical. Location fingerprinting, which utilizes machine learning, has emerged as a viable method and solution for indoor positioning due to its simple concept and accurate performance. In the past, shallow learning algorithms were traditionally used in location fingerprinting. Recently, the research community started utilizing deep learning methods for fingerprinting after witnessing the great success and superiority these methods have ove…
Among many techniques for indoor localization, fingerprinting has been shown to provide a higher accuracy compared to the alternative techniques. Fingerprinting techniques require an initial calibration phase during which site surveyors visit virtually every location in the area of interest to manually collect the fingerprint data. However, this process is labour intensive, tedious, and needs to be repeated with any change in the environment. In this work, we propose a technique for enhancing cellular-based indoor localization fingerprinting systems by automatically increasing the spatial dens…
Recent research and development interests deal with metasurfaces for wireless systems beyond their consideration as intelligent tunable reflectors. Among the latest proposals is the simultaneously transmitting (a.k.a. refracting) and reflecting reconfigurable intelligent surface (STAR-RIS) which intends to enable bidirectional indoor-to-outdoor, and vice versa, communications thanks to its additional refraction capability. This double functionality provides increased flexibility in concurrently satisfying the quality-of-service requirements of users located at both sides of the metasurfaces, f…
Millimeter-wave (mmWave) frequency bands are expected to be used for future 5G networks due to the availability of large unused spectrum. However, the attenuation at mmWave frequencies is high. To resolve this issue, the utilization of high gain antennas and beamforming mechanisms are widely investigated in the literature. In this work, we considered mmWave end-to-end propagation modeled by individual ray sources, and explored the effects of the number of rays in the model and radiation patterns of the deployed antennas on the received power. It is shown that taking the dominant two rays is su…
Indoor localization is of particular interest due to its immense practical applications. However, the rich multipath and high penetration loss of indoor wireless signal propagation make this task arduous. Though recently studied fingerprint-based techniques can handle the multipath effects, the sensitivity of the localization performance to channel fluctuation is a drawback. To address the latter challenge, we adopt an artificial multi-layer neural network (MNN) to learn the complex channel impulse responses (CIRs) as fingerprint measurements. However, the performance of the location classific…
Localization is important for a large number of Internet of Things (IoT) endpoint devices connected by LoRaWAN. Due to the bandwidth limitations of LoRaWAN, existing localization methods without specialized hardware (e.g., GPS) produce poor performance. To increase the localization accuracy, we propose a super-resolution localization method, called Seirios, which features a novel algorithm to synchronize multiple non-overlapped communication channels by exploiting the unique features of the radio physical layer to increase the overall bandwidth. By exploiting both the original and the conjugat…
The localization technology is important for the development of indoor location-based services (LBS). The radio frequency (RF) fingerprint-based localization is one of the most promising approaches. However, it is challenging to apply this localization to real-world environments since it is time-consuming and labor-intensive to construct a fingerprint database as a prior for localization. Another challenge is that the presence of anomaly readings in the fingerprints reduces the localization accuracy. To address these two challenges, we propose an efficient and robust indoor localization approa…
Reconfigurable intelligent surface (RIS)-empowered communication is one of the promising 6G technologies that allows the conversion of the wireless channel into an intelligent transmit entity by manipulating the impinging waves using man-made surfaces. In this paper, the potential benefits of using RISs are investigated for indoor/outdoor setups and various frequency bands (from sub 6 GHz to millimeter-waves). First, a general system model with a single RIS is considered and the effect of the total number of reflecting elements on the probabilistic distribution of the received signal-to-noise …
Key Laboratory of Aerospace Information Security and Trusted Computing, Ministry of Education, China（中国教育部航空航天信息安全与可信计算重点实验室）；School of Cyber Science and Engineering, Wuhan University, China（中国武汉大学网络空间安全学院）
Multi-source fusion positioning is one of the technical frameworks for obtaining sufficient indoor positioning accuracy. In order to evaluate the effect of multi-source fusion positioning, it is necessary to establish a fusion error model. In this paper, we first use the least squares method to fuse the radio fingerprint and the PDR positioning, and then apply the variance propagation laws to calculate the error distribution of indoor multi-source localization methods. Based on the fusion error model, we developed an indoor positioning simulation system. The system can give a better positionin…
Research Center for Information Technology Innovation, Academia Sinica（中央研究院资讯科技创新研究中心）
Device-free wireless indoor localization is a key enabling technology for the Internet of Things (IoT). Fingerprint-based indoor localization techniques are a commonly used solution. This paper proposes a semi-supervised, generative adversarial network (GAN)-based device-free fingerprinting indoor localization system. The proposed system uses a small amount of labeled data and a large amount of unlabeled data (i.e., semi-supervised), thus considerably reducing the expensive data labeling effort. Experimental results show that, as compared to the state-of-the-art supervised scheme, the proposed…
Research Center for Information Technology Innovation, Academia Sinica（中央研究院资讯科技创新研究中心）
Device-free wireless indoor localization is an essential technology for the Internet of Things (IoT), and fingerprint-based methods are widely used. A common challenge to fingerprint-based methods is data collection and labeling. This paper proposes a few-shot transfer learning system that uses only a small amount of labeled data from the current environment and reuses a large amount of existing labeled data previously collected in other environments, thereby significantly reducing the data collection and labeling cost for localization in each new environment. The core method lies in graph neu…
Fingerprinting-based approaches are particularly suitable for deploying indoor positioning systems for pedestrians with minimal infrastructure costs. The accuracy of the method, however, strongly depends on the quality of collected labeled fingerprints within the calibration phase, which is a tedious process when done manually in a static fashion. We present VI-SLAM2tag, a system for auto-labeling of dynamically collected fingerprints using the visual-inertial simultaneous localization and mapping (VI-SLAM) module of ARCore. ARCore occasionally updates its internal coordinate system. Mapping t…
Outdoor-to-indoor communications in millimeter-wave (mmWave) cellular networks have been one challenging research problem due to the severe attenuation and the high penetration loss caused by the propagation characteristics of mmWave signals. We propose a viable solution to implement the outdoor-to-indoor mmWave communication system with the aid of an active intelligent transmitting surface (active-ITS), where the active-ITS allows the incoming signal from an outdoor base station (BS) to pass through the surface and be received by the indoor user-equipments (UEs) after shifting its phase and m…
With the growing integration of location based services (LBS) such as GPS in mobile devices, indoor position systems (IPS) have become an important role for research. There are several IPS methods such as AOA, TOA, TDOA, which use trilateration for indoor location estimation but are generally based on line-of-sight. Other methods rely on classification such as fingerprinting which uses WLAN indoor signals. This paper re-examines the classical WLAN fingerprinting accuracy which uses received signal strength (RSS) measurements by introducing channel estimates for improvements in the classificati…
University of Melbourne（墨尔本大学）；China University of Geosciences（中国地质大学）；National Engineering Research Center for Geographic Information System（国家地理信息系统工程技术研究中心）
Fingerprinting is a popular indoor localization technique since it can utilize existing infrastructures (e.g., access points). However, its site survey process is a labor-intensive and time-consuming task, which limits the application of such systems in practice. In this paper, motivated by the availability of advanced sensing capabilities in smartphones, we propose a fast and reliable fingerprint collection method to reduce the time and labor required for site survey. The proposed method uses a landmark graph-based method to automatically associate the collected fingerprints, which does not r…
With the increasing adoption of millimeter-waves (mmWave) over cellular networks, outdoor-to-indoor (O2I) communication has been one of the challenging research problems due to high penetration loss of buildings. To address this, we investigate the practicability of utilizing reconfigurable intelligent surfaces (RISs) for assisting such O2I communication. We propose a new notion of prefabricated RIS-empowered wall consisting of a large number of chipless radio frequency identification (RFID) sensors. Each sensor maintains its own bank of delay lines. These sensors which are built within the bu…
A Fingerprint Database Generation Method for RIS-Assisted Indoor Positioning
College of Information Science and Engineering, Hohai University（河海大学信息科学与工程学院）；College of Electrical and Power Engineering, Hohai University（河海大学电气与动力工程学院）；School of Information and Communication Engineering, Hainan University（海南大学信息与通信工程学院）
Due to the indoor none-line-of-sight (NLoS) propagation and multi-access interference (MAI), it is a great challenge to achieve centimeter-level positioning accuracy in indoor scenarios. However, the sixth generation (6G) wireless communications provide a good opportunity for the centimeter-level positioning. In 6G, the millimeter wave (mmWave) and terahertz (THz) communications have ultra-broad bandwidth so that the channel state information (CSI) will have a high resolution. In this paper, a weighted random forest (WRF) based indoor positioning algorithm using CSI based channel fingerprint f…
Universitat Jaume I（海梅一世大学）；Tampere University（坦佩雷大学）；Universidade do Minho（米尼奥大学）
Wearable and IoT devices requiring positioning and localisation services grow in number exponentially every year. This rapid growth also produces millions of data entries that need to be pre-processed prior to being used in any indoor positioning system to ensure the data quality and provide a high Quality of Service (QoS) to the end-user. In this paper, we offer a novel and straightforward data cleansing algorithm for WLAN fingerprinting radio maps. This algorithm is based on the correlation among fingerprints using the Received Signal Strength (RSS) values and the Access Points (APs)'s ident…
Machine learning (ML) solutions to indoor localization problems have become popular in recent years due to high positioning accuracy and low cost of implementation. This paper proposes a novel local nonparametric approach for solving localizations from high-dimensional Received Signal Strength Indicator (RSSI) values. Our approach consists of a sequence of classification algorithms that sequentially narrows down the possible space for location solutions into smaller neighborhoods. The idea of this sequential classification method is similar to the decision tree algorithm, but a key difference …
Reconfigurable intelligent surface (RIS)-assisted communication appears as one of the potential enablers for sixth generation (6G) wireless networks by providing a new degree of freedom in the system design to telecom operators. Particularly, RIS-empowered millimeter wave (mmWave) communication systems can be a remedy to provide broadband and ubiquitous connectivity. This paper aims to fill an important gap in the open literature by providing a physical, accurate, open-source, and widely applicable RIS channel model for mmWave frequencies. Our model is not only applicable in various indoor and…
Attentional Graph Meta-Learning for Indoor Localization Using Extremely Sparse Fingerprints
School of Science & Engineering, The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳）理工学院）；Huawei Technologies Co., LTD.（华为技术有限公司）；School of Data Science, The Chinese University of Hong Kong, Shenzhen（香港中文大学（深圳）数据科学学院）
Energy efficiency (EE) is a major performance metric for fifth generation (5G) and beyond 5G (B5G) wireless communication systems, especially for ultra dense networks. This paper proposes an end-to-end (e2e) power consumption model and studies the energy efficiency for a heterogeneous B5G cellular architecture that separates the indoor and outdoor communication scenarios in ultra dense networks. In this work, massive multiple-input-multiple-output (MIMO) technologies at conventional sub-6 GHz frequencies are used for long-distance outdoor communications. Light-Fidelity (LiFi) and millimeter wa…
Universitat Jaume I（海梅一世大学）；Tampere University（坦佩雷大学）；Universidade do Minho（米尼奥大学）
Indoor Positioning based on Machine Learning has drawn increasing attention both in the academy and the industry as meaningful information from the reference data can be extracted. Many researchers are using supervised, semi-supervised, and unsupervised Machine Learning models to reduce the positioning error and offer reliable solutions to the end-users. In this article, we propose a new architecture by combining Convolutional Neural Network (CNN), Long short-term memory (LSTM) and Generative Adversarial Network (GAN) in order to increase the training data and thus improve the position accurac…
Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitt…
Wireless-Friendly Window Position Optimization for RIS-Aided Outdoor-to-Indoor Networks based on Multi-Modal Large Language Model
Department of Electronic and Electrical Engineering, the University of Sheffield（电子与电气工程系，谢菲尔德大学）；Department of Computer Science and Technology, University of Cambridge（计算机科学与技术系，剑桥大学）；Brunel University London（伦敦布鲁内尔大学）；School of Information and Electronic Engineering, Zhejiang Gongshang University（信息与电子工程学院，浙江工商大学）；Design & Health Lab, Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano（设计与健康实验室，建筑、环境与土木工程系，米兰理工学院）；Department of Computer Science, Brunel University London（计算机科学系，伦敦布鲁内尔大学）；The State Key Laboratory of Synthetical Automation for Process Industries and The College of Information Science and Engineering, Northeastern University（过程工业综合自动化国家重点实验室和信息科学与工程学院，东北大学）；Centre for Wireless Innovation, Queen’s University of Belfast（无线创新中心，贝尔法斯特女王大学）
With the unprecedented demand for location-based services in indoor scenarios, wireless indoor localization has become essential for mobile users. While GPS is not available at indoor spaces, WiFi RSS fingerprinting has become popular with its ubiquitous accessibility. However, it is challenging to achieve robust and efficient indoor localization with two major challenges. First, the localization accuracy can be degraded by the random signal fluctuations, which would influence conventional localization algorithms that simply learn handcrafted features from raw fingerprint data. Second, mobile …
