Real quantum heat engines lack the separation of time and length scales that is characteristic for classical engines. They must be understood as open quantum systems in non-equilibrium with time-controlled coupling to thermal reservoirs as integral part. Here, we present a systematic approach to describe a broad class of engines and protocols beyond conventional weak coupling treatments starting from a microscopic modeling. For the four stroke Otto engine the full dynamical range down to low temperatures is explored and the crucial role of the work associated with the coupling/decoupling to/from reservoirs in the energy balance is revealed. Quantum correlations turn out to be instrumental to enhance the efficiency which opens new ways for optimal control techniques.
Heat engines are fundamental physical objects to develop nonequilibrium thermodynamics. The thermodynamic performance of the heat engine is determined by the choice of cycle and time-dependence of parameters. Here, we propose a systematic numerical method to find a heat engine cycle to optimize some target functions. We apply the method to heat engines with slowly varying parameters and show that the method works well. Our numerical method is based on the genetic algorithm which is widely applied to various optimization problems.
The aim of this paper is to determine lost works in a molecular engine and compare results with macro (classical) heat engines. Firstly, irreversible thermodynamics are reviewed for macro and molecular cycles. Secondly, irreversible thermodynamics approaches are applied for a quantum heat engine with -1/2 spin system. Finally, lost works are determined for considered system and results show that macro and molecular heat engines obey same limitations. Moreover, a quantum thermodynamic approach is suggested in order to explain the results previously obtained from an atomic viewpoint.
We propose a quantum-enhanced heat engine with entanglement. The key feature of our scheme is superabsorption, which facilitates enhanced energy absorption by entangled qubits. Whereas a conventional engine with $N$ separable qubits provides power with a scaling of $P = Θ(N)$, our engine uses superabsorption to provide power with a quantum scaling of $P = Θ(N^2)$. This quantum heat engine also exhibits a scaling advantage over classical ones composed of $N$-particle Langevin systems. Our work elucidates the quantum properties allowing for the enhancement of performance.
In this paper, we study the role and relevance of the cost for an invariant-based shortcut to adiabaticity enabled qubit heat engine operates in a quantum Otto cycle. We consider a qubit heat engine with Landau-Zener Hamiltonian and improve its performance using the Lewis-Riesenfeld invariant-based shortcut to adiabaticity method. Addressing the importance of cost for better performance, the paper explores its relationship with the work and efficiency of the heat engine. We analyze the cost variation with the time duration of non-adiabatic unitary processes involved in the heat engine cycle. T…
We propose and analyze the theoretical model for a two-stroke quantum heat engine with one of the heat baths replaced by a non-selective quantum measurement. We show that the engine's invariant reference state depends on whether the cycle is monitored or unmonitored via diagnostic measurements to determine the engine's work output. We explore in detail the average work output and fluctuations of the proposed heat engine for the monitored and unmonitored cases. We also identify unitary work strokes for which the invariant states can support coherences in the energy basis leading to differing pr…
The impacts of quantum coherence on nonequilibrium thermodynamics become observable by dividing the heat and work into the conventional diagonal part and the other part relaying on the superpositions and the time derivative of Hamiltonian. Specializing to exactly-solvable dynamics of Larmor precession, we build a quantum Otto heat engine employing magnetic-driven atomic rotations. The coherence induced by the population transition guarantees the positive work output when the control protocol is time dependent. The time-dependent control of a quantum heat engine implements the correspondence be…
In this work, we establish an exact relation which connects the heat exchange between two systems initialized in their thermodynamic equilibrium states at different temperatures and the Rényi divergences between the initial thermodynamic equilibrium state and the final non-equilibrium state of the total system. The relation tells us that the various moments of the heat statistics are determined by the Renyi divergences between the initial equilibrium state and the final non-equilibrium state of the global system. In particular the average heat exchange is quantified by the relative entropy bet…
We consider quantum heat engines that operate between nonequilibrium stationary reservoirs. We evaluate their maximum efficiency from the positivity of the entropy production and show that it can be expressed in terms of an effective temperature that depends on the nature of the reservoirs. We further compute the efficiency at maximum power for different kinds of engineered reservoirs and derive a nonequilibrium generalization of the Clausius statement of the second law.
The efficiency of small thermal machines is typically a fluctuating quantity. We here study the efficiency large deviation function of two exemplary quantum heat engines, the harmonic oscillator and the two-level Otto cycles. While the efficiency statistics follows the 'universal' theory of Verley et al. [Nature Commun. 5, 4721 (2014)] for nonadiabatic driving, we find that the latter framework does not apply in the adiabatic regime. We relate this unusual property to the perfect anticorrelation between work output and heat input that generically occurs in the broad class of scale-invariant ad…
We investigate a heat engine with a finite length Kitaev chain in an Otto cycle. Finite size effects are taken into account using method of Hill's nano-thermodynamics as well as using the method of temperature dependent energy levels. We distinguish the bulk and boundary contributions to the efficiency and the work output of Kitaev chain engine and identify them as non-Otto heat engine and refrigerator cycles, respectively. Possibility of separately running Otto engine cycles associated with the bulk and the whole system, and an Otto refrigerator at the boundary is pointed out. It is found tha…
Quantum heat engines are modeled by thermodynamic cycles with quantum-mechanical working media. Since high engine efficiencies require adiabaticity, a major challenge is to yield a nonvanishing power output at finite cycle times. Shortcuts to adiabaticity using counter-diabatic (CD) driving may serve as a means to speed up such, otherwise infinitely long, cycles. We introduce local approximate CD protocols for many-body spin quantum heat engines and show that this method improves the efficiency and power for finite cycle times considerably. The protocol does not require a priori knowledge of t…
A major limitations for many heat engines is that their functioning demands on-line control, and/or an external fitting between environmental parameters (e.g. temperatures of thermal baths) and internal parameters of the engine. We study a model for an adaptive heat engine, where---due to feedback from the functional part---the engine's structure adapts to given thermal baths. Hence no on-line control and no external fitting are needed. The engine can employ unknown resources, it can also adapt to results of its own functioning that makes the bath temperatures closer. We determine thermodynami…
We present a quantum Otto engine model consisting of two isochoric and two adiabatic strokes, where the adiabatic expansion or compression is realized by adiabatically changing the shape of the potential. Here we show that such an adiabatic deformation may alter operation mode and enhance machine performance by increasing output work and efficiency, even with the advantage of decreasing work fluctuations. If the heat engine operates under maximal power by optimizing the control parameter, the efficiency shows certain universal behavior.
Using information entropy formalism, we consider a one-dimensional system with heat flux and extend the meaning of equilibrium variables to non equilibrium scenarios when classical local equilibrium approach is not applicable; this is particularly important for the performance evaluation of modern thermal systems and microdevices, which usually operate in extreme situations. The extended non equilibrium entropy, temperature, thermal conductivity and heat capacity have been analyzed as functions of the local energy density (kinetic temperature) and heat flux.
The Casimir force between arbitrary objects in equilibrium is related to scattering from individual bodies. We extend this approach to heat transfer and Casimir forces in non-equilibrium cases where each body, and the environment, is at a different temperature. The formalism tracks the radiation from each body and its scatterings by the other objects. We discuss the radiation from a cylinder, emphasizing its polarized nature, and obtain the heat transfer between a sphere and a plate, demonstrating the validity of proximity transfer approximation at close separations and arbitrary temperatures.
We study how a quantum heat engine performs across the critical value of an external parameter, pertaining to the quantum phase transition. Considering a two-ion system subjected to a magnetic field, we show that the system performs in a quantum Otto cycle above a critical value of the magnetic field, while below such critical point, it does not operate in a heat cycle at all. Moreover, at the critical point, its interaction with an ancillary ion deteriorates the performance of the system as a heat engine. We further show that a strong interaction between the constituent ions of an ion-based s…
We study a minimal quantum Otto heat engine, where the working medium consists of an interacting few-body system in a harmonic trap. This allows us to consider the interaction strength as an additional tunable parameter during the work strokes. We calculate the figures of merit of this engine as a function of the temperature and show clearly in which parameter regimes the interactions assist in engine performance. We also study the finite time dynamics and the subsequent trade-off between the efficiency and the power, comparing the interaction enhanced cycle with the case where the system rema…
The non-equilibrium state of two oscillators with a mutual interaction and coupled to separate heat baths is discussed. Bosonic baths are considered, and an exact spectral representation for the elements of the covariance matrix is provided analytically. A wide class of spectral densities for the relevant bath modes is allowed for. The validity of the fluctuation-dissipation theorem is established for global equilibrium (both baths at the same temperature) in the stationary state. Spectral measures of entanglement are suggested by comparing to the equilibrium spectrum of zero-point fluctuation…
A quantum heat engine of a specific type is studied. This engine contains a single particle confined in the infinite square well potential with variable width and consists of three processes: the isoenergetic process (which has no classical analogs) as well as the isothermal and adiabatic processes. It is found that the engine possesses exotic properties in its performance. The efficiency takes the maximum value when the expansion ratio of the engine is appropriately set, and, in addition, the lower the temperature is, the higher the maximum efficiency becomes, highlighting aspects of the infl…
For heat engines working between two heat baths, functionality is often conditioned on a set of fixed constraints such as given internal structure of the engine and given temperatures for the baths. It is, however, important to devise heat engines which can function adaptively, in particular when the engine is a quantum system and the baths are subject to fluctuations. Here we study a model for an adaptive quantum heat engine whose heat baths can have variable temperatures. We obtain conditions under which such an engine can still operate. Moreover, we propose an enhancement of the heat engine…
We report an experimental demonstration of a coupled-mode heat engine in a two-membrane-in-the-middle cavity optomechanical system. The normal mode of the cavity-mediated strongly coupled nanoresonators is utilized as the working medium and an Otto cycle is realized by extracting work between two phononic thermal reservoirs. The heat engine performance is characterized in both normal mode and bare mode pictures, which reveals that the correlation of two membranes plays a significant role during the thermodynamic cycle. Moreover, a straight-twin nanomechanical engine is implemented by engineeri…
We study the stochastic energetic exchanges in quantum heat engines. Due to microreversibility, these obey a fluctuation relation, called the heat engine fluctuation relation, which implies the Carnot bound: no machine can have an efficiency larger than Carnot's efficiency. The stochastic thermodynamics of a quantum heat engine (including the joint statistics of heat and work and the statistics of efficiency) is illustrated by means of an optimal two-qubit heat engine, where each qubit is coupled to a thermal bath and a two-qubit gate determines energy exchanges between the two qubits. We disc…
The heat engine, a machine that extracts useful work from thermal sources, is one of the basic theoretical constructs and fundamental applications of classical thermodynamics. The classical description of a heat engine does not include coherence in its microscopic degrees of freedom. By contrast, a quantum heat engine might possess coherence between its internal states. Although the Carnot efficiency cannot be surpassed, and coherence can be performance degrading in certain conditions, it was recently predicted that even when using only thermal resources, internal coherence can enable a quantu…
We introduce a new quantum heat engine, in which the working medium is a quantum system with a discrete level and a continuum. Net work done by this engine is calculated and discussed. The results show that this quantum heat engine behaves like the two-level quantum heat engine in both the high-temperature and the low-temperature limits, but it operates differently in temperatures between them. The efficiency of this quantum heat engine is also presented and discussed.
In this work, we introduce the concept of the fractional quantum heat engine. We examine the space-fractional quantum Szilard heat engine as an example to show that the space-fractional quantum heat engines can produce higher efficiency than the conventional quantum heat engines.
Heat engines used to output useful work have important practical significance, which, in general, operate between heat baths of infinite size and constant temperature. In this paper we study the efficiency of a heat engine operating between two finite-size heat sources with initial temperature differences. The total output work of such heat engine is limited due to the finite heat capacity of the sources. We investigate the effects of different heat capacity characteristics of the sources on the heat engine's efficiency at maximum work (EMW) in the quasi-static limit. In addition, we study the…
We analyze an autonomous thermoelectric engine composed of two superconducting qubits coupled to separate heat baths and connected by a Josephson junction. Work and heat are process quantities and not observables of the engine quantum system, but their rates can be derived from the steady state expectation value of appropriate system observables and their fluctuations are given by correlation functions determined with the GKLS master equation and quantum regression theorem. The correlation functions also reveal a cyclical, dynamical transfer of energy - the strokes of the engine - hiding under…
In order to describe quantum heat engines, here we systematically study isothermal and isochoric processes for quantum thermodynamic cycles. Based on these results the quantum versions of both the Carnot heat engine and the Otto heat engine are defined without ambiguities. We also study the properties of quantum Carnot and Otto heat engines in comparison with their classical counterparts. Relations and mappings between these two quantum heat engines are also investigated by considering their respective quantum thermodynamic processes. In addition, we discuss the role of Maxwell's demon in quan…
Mesoscopic thermoelectric heat engine is much anticipated as a device that allows us to utilize with high efficiency wasted heat inaccessible by conventional heat engines. However, the derivation of the heat current in this engine seems to be either not general or described too briefly, even inappropriate in some cases. In this paper, we give a clear-cut derivation of the heat current of the engine with suitable assumptions beyond the linear-response regime. It resolves the confusion in the definition of the heat current in the linear-response regime. After verifying that we can construct the …
We show that quantum coherence can enhance the performance of a continuous quantum heat engine in the Lindblad description. We investigate the steady-state solutions of the particle-exchanging quantum heat engine, composed of degenerate double quantum dots coupled to two heat baths in parallel, where quantum coherence may be induced due to interference between relaxation channels. We find that the engine power can be enhanced by the coherence in the nonlinear response regime, when the symmetry of coupling configurations between dots and two baths is broken. In the symmetric case, the coherence…
Modern technologies could soon make it possible to investigate the operation cycles of quantum heat engines by counting the photons that are emitted and absorbed by their working systems. Using the quantum jump approach to open-system dynamics, we show that such experiments would give access to a set of observables that determine the trade-off between power and efficiency in finite-time engine cycles. By analyzing the single-jump statistics of thermodynamic fluxes such as heat and entropy production, we obtain a family of general bounds on the power of microscopic heat engines. Our new bounds …
We present a detailed derivation of heat radiation, heat transfer and (Casimir) interactions for N arbitrary objects in the framework of fluctuational electrodynamics in thermal non-equilibrium. The results can be expressed as basis-independent trace formulae in terms of the scattering operators of the individual objects. We prove that heat radiation of a single object is positive, and that heat transfer (for two arbitrary passive objects) is from the hotter to a colder body. The heat transferred is also symmetric, exactly reversed if the two temperatures are exchanged. Introducing partial wav…
Certain solutions of Einstein's equations in anti-de Sitter spacetime can be engineered, using extended gravitational thermodynamics, to yield `holographic heat engines', devices that turn heat into useful mechanical work. On the other hand, there are constructions (both experimental and theoretical) where a series of operations is performed on a small quantum system, defining what are known as `quantum heat engines'. We propose that certain holographic heat engines can be considered models of quantum heat engines, and the possible fruitfulness of this connection is discussed. Motivated by fea…
A heat engine is a machine which uses the temperature difference between a hot and a cold reservoir to extract work. Here both reservoirs are quantum systems and a heat engine is described by a unitary transformation which decreases the average energy of the bipartite system. On the molecular scale, the ability of implementing such a unitary heat engine is closely connected to the ability of performing logical operations and classical computing. This is shown by several examples: (1) The most elementary heat engine is a SWAP-gate acting on 1 hot and 1 cold two-level systems with different ener…
With a class of quantum heat engines which consists of two-energy-eigenstate systems undergoing, respectively, quantum adiabatic processes and energy exchanges with heat baths at different stages of a cycle, we are able to clarify some important aspects of the second law of thermodynamics. The quantum heat engines also offer a practical way, as an alternative to Szilard's engine, to physically realise Maxwell's daemon. While respecting the second law on the average, they are also capable of extracting more work from the heat baths than is otherwise possible in thermal equilibrium.
We propose an experimental scheme to realize a nano heat engine with a single ion. An Otto cycle may be implemented by confining the ion in a linear Paul trap with tapered geometry and coupling it to engineered laser reservoirs. The quantum efficiency at maximum power is analytically determined in various regimes. Moreover, Monte Carlo simulations of the engine are performed that demonstrate its feasibility and its ability to operate at maximum efficiency of 30% under realistic conditions.
We introduce a class of quantum heat engines which consists of two-energy-eigenstate systems, the simplest of quantum mechanical systems, undergoing quantum adiabatic processes and energy exchanges with heat baths, respectively, at different stages of a cycle. Armed with this class of heat engines and some interpretation of heat transferred and work performed at the quantum level, we are able to clarify some important aspects of the second law of thermodynamics. In particular, it is not sufficient to have the heat source hotter than the sink, but there must be a minimum temperature difference …
A quantum model of a heat engine resembling the Otto cycle is employed to explore strategies to suppress frictional losses. These losses are caused by the inability of the engine's working medium to follow adiabatically the change in the Hamiltonian during the expansion and compression stages. By adding external noise to the engine, frictional losses can be suppressed.
Quantum heat engines are subjected to quantum fluctuations related to their discrete energy spectra. Such fluctuations question the reliable operation of quantum engines in the microscopic realm. We here realize an endoreversible quantum Otto cycle in the large quasi-spin states of Cesium impurities immersed in an ultracold Rubidium bath. Endoreversible machines are internally reversible and irreversible losses only occur via thermal contact. We employ quantum control over both machine and bath to suppress internal dissipation and regulate the direction of heat transfer that occurs via inelast…
We develop a geometric framework to describe the thermodynamics of microscopic heat engines driven by slow periodic temperature variations and modulations of a mechanical control parameter. Covering both the classical and the quantum regime, our approach reveals a universal trade-off relation between efficiency and power that follows solely from geometric arguments and holds for any thermodynamically consistent microdynamics. Focusing on Lindblad dynamics, we derive a second bound showing that coherence as a genuine quantum effect inevitably reduces the performance of slow engine cycles regard…
By using a laser and maser in tandem, it is possible to obtain laser action in the hot exhaust gases involved in heat engine operation. Such a "quantum afterburner" involves the internal quantum states of working gas atoms or molecules as well as the techniques of cavity quantum electrodynamics and is therefore in the domain of quantum thermodynamics. As an example, it is shown that Otto cycle engine performance can be improved beyond that of the "ideal" Otto heat engine.
We construct the smallest possible self contained heat engines; one composed of only two qubits, the other of only a single qutrit. The engines are self-contained as they do not require external sources of work and/or control. They are able to produce work which is used to continuously lift a weight. Despite the dimension of the engine being small, it is still able to operate at the Carnot efficiency.
Landauer's erasure principle is a cornerstone of thermodynamics and information theory. According to this principle, erasing information incurs a minimum energy cost. Recently, Vaccaro and Barnett [Proc. R. Soc {\bf 467}, 1770 (2011)] explored information erasure in the context of multiple conserved quantities and showed that the erasure cost can be solely in terms of spin angular momentum. As Landauer's erasure principle plays a fundamental role in heat engines, their result considerably widens the possible configurations that heat engines can have. Motivated by this, we propose here a novel …
We describe how electromagnetically induced transparency may be used to construct a non-traditional near-ideal quantum heat engine as constrained by the Second Law. The engine is pumped by a thermal reservoir that may be either hotter or colder than that of an exhaust reservoir, and also by a monochromatic laser. As output, it produces a bright narrow emission at line center of an otherwise absorbing transition.
We investigate the quantum thermodynamic cycle of a quantum heat engine carrying out an Otto thermodynamic cycle. We use the thermal properties of a moving heat bath with relativistic velocity with respect to the cold bath. As a working medium, we use a two-level system and a harmonic oscillator that interact with a moving heat bath and a static cold bath. In the current work, the quantum heat engine is studied in the high and low temperatures regime. Using quantum thermodynamics and the theory of open quantum system we obtain the total produced work, the efficiency and the efficiency at maxim…
We propose an autonomous quantum heat engine based on the thermally driven oscillation of a single electron shuttle. The electronic degree of freedom of this device acts as an internal dynamical controller which switches the interaction of the engine with the thermal baths. We show that in addition to energy flux through the thermal baths, a flux of energy is attributed to the controller and it affects the engine power.
Quantum thermodynamics studies quantum effects in thermal machines. But when is a heat engine, which cyclically interacts with external reservoirs that unavoidably destroy its quantum coherence, really quantum? We here use the Leggett-Garg inequality to assess the nonclassical properties of a single two-level Otto engine. We provide the complete phase diagram characterizing the quantumness of the engine as a function of its parameters and identify three distinct phases. We further derive an explicit expression for the transition temperature.
There exists a consistent thermodynamical formalism with canonical definition of local temperatures which allows to extend the Carnot bound also to non-equilibrium baths, like those discussed in the Letter
Standard heat machines (engine, heat pump, refrigerator) are composed of a system ("working fluid") coupled to at least two equilibrium baths at different temperatures and periodically driven by an external device (piston or rotor) called sometimes work reservoir. The aim of this paper is to go beyond this scheme by considering environments which are stationary but cannot be decomposed into few baths at thermal equilibrium. Such situations are important, for example in solar cells, chemical machines in biology, various realizations of laser cooling or nanoscopic machines driven by laser radiat…
Quantum cycles in established heat engines can be modeled with various quantum systems as working substances. For example, a heat engine can be modeled with an infinite potential well as the working substance to determine the efficiency and work done. However, in this method, the relationship between the quantum observables and the physically measurable parameters i.e., the efficiency and work done is not well understood from the quantum mechanics approach. A detailed analysis is needed to link the thermodynamic variables (on which the efficiency and work done depends) with the uncertainty pri…
