几种同步加法器的性能比较
Performance Comparison of some Synchronous Adders
摘要:
本技术说明比较了与以下架构对应的一些同步加法器的性能:i)纹波进位加法器(RCA),ii)递归超前进位加法器(RCLA),iii)RCA用于最低有效加法器位位置的混合RCLA-RCA,iv)块超前进位加法器(BCLA),v)RCA用于最低有效加法器位位置的混合BCLA-RCA,以及vi)不具有和具有二进制到超1码(BEC)转换器的非均匀输入分区进位选择加法器(CSLA)。32位加法被认为是一个示例操作。所提到的加法器架构是通过针对Synopsys 32/28 nm CMOS技术的典型情况PVT规范(高阈值电压,1.05V的电源电压和25摄氏度的工作温度)来实现的。通过比较得出以下结论:i)混合CCLA-RCA在速度、功率延迟积和能量延迟积方面优于其它加法器,ii)不具有BEC转换器的非均匀输入分区CSLA在面积延迟积方面优于其它加法器,以及iii)结合标准数字单元库中存在的全加器的RCA在功率延迟面积积方面优于其它加法器。
英文摘要:
This technical note compares the performance of some synchronous adders which correspond to the following architectures: i) ripple carry adder (RCA), ii) recursive carry lookahead adder (RCLA), iii) hybrid RCLA-RCA with the RCA used in the least significant adder bit positions, iv) block carry lookahead adder (BCLA), v) hybrid BCLA-RCA with the RCA used in the least significant adder bit positions, and vi) non-uniform input partitioned carry select adders (CSLAs) without and with the binary to excess-1 code (BEC) converter. The 32-bit addition was considered as an example operation. The adder architectures mentioned were implemented by targeting a typical case PVT specification (high threshold voltage, supply voltage of 1.05V and operating temperature of 25 degrees Celsius) of the Synopsys 32/28nm CMOS technology. The comparison leads to the following observations: i) the hybrid CCLA-RCA is preferable to the other adders in terms of the speed, the power-delay product, and the energy-delay product, ii) the non-uniform input partitioned CSLA without the BEC converter is preferable to the other adders in terms of the area-delay product, and iii) the RCA incorporating the full adder present in the standard digital cell library is preferable to the other adders in terms of the power-delay-area product.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。