Real Time Elbow Angle Estimation Using Single RGB Camera
British Malaysian Institute, Universiti Kuala Lumpur（吉隆坡大学英马学院）；Malaysian Institute of Information Technology, Universiti Kuala Lumpur（吉隆坡大学马来西亚信息技术学院）；International Islamic University, Malaysia（马来西亚国际伊斯兰大学）；Effat University（埃法特大学）
Muhammad Yahya, Jawad Ali Shah, Arif Warsi, Kushsairy Kadir, Sheroz Khan, M Izani
The use of motion capture has increased from last decade in a varied spectrum of applications like film special effects, controlling games and robots, rehabilitation system, animations etc. The current human motion capture techniques use markers, structured environment, and high resolution cameras in a dedicated environment. Because of rapid movement, elbow angle estimation is observed as the most difficult problem in human motion capture system. In this paper, we take elbow angle estimation as our research subject and propose a novel, markerless and cost-effective solution that uses RGB camera for estimating elbow angle in real time using part affinity field. We have recruited five (5) participants to perform cup to mouth movement and at the same time measured the angle by both RGB camera and Microsoft Kinect. The experimental results illustrate that markerless and cost-effective RGB camera has a median RMS errors of 3.06° and 0.95° in sagittal and coronal plane respectively as compared to Microsoft Kinect.
College of Optical and Electronic Technology, China Jiliang University（中国计量大学光学与电子科技学院）
Hyperspectral image (HSI) contains both spatial pattern and spectral information which has been widely used in food safety, remote sensing, and medical detection. However, the acquisition of hyperspectral images is usually costly due to the complicated apparatus for the acquisition of optical spectrum. Recently, it has been reported that HSI can be reconstructed from single RGB image using convolution neural network (CNN) algorithms. Compared with the traditional hyperspectral cameras, the method based on CNN algorithms is simple, portable and low cost. In this study, we focused on the influen…
We propose a method to build in real-time animated 3D head models using a consumer-grade RGB-D camera. Our proposed method is the first one to provide simultaneously comprehensive facial motion tracking and a detailed 3D model of the user's head. Anyone's head can be instantly reconstructed and his facial motion captured without requiring any training or pre-scanning. The user starts facing the camera with a neutral expression in the first frame, but is free to move, talk and change his face expression as he wills otherwise. The facial motion is captured using a blendshape animation model whil…
We introduce DROID-SLAM, a new deep learning based SLAM system. DROID-SLAM consists of recurrent iterative updates of camera pose and pixelwise depth through a Dense Bundle Adjustment layer. DROID-SLAM is accurate, achieving large improvements over prior work, and robust, suffering from substantially fewer catastrophic failures. Despite training on monocular video, it can leverage stereo or RGB-D video to achieve improved performance at test time. The URL to our open source code is https://github.com/princeton-vl/DROID-SLAM.
Institute of Research and Technology b<>com（b<>com技术研究院）
Purpose. Ability to locate and track ultrasound images in the 3D operating space is of great benefit for multiple clinical applications. This is often accomplished by tracking the probe using a precise but expensive optical or electromagnetic tracking system. Our goal is to develop a simple and low cost augmented reality echography framework using a standard RGB-D Camera. Methods. A prototype system consisting of an Occipital Structure Core RGB-D camera, a specifically-designed 3D marker, and a fast point cloud registration algorithm FaVoR was developed and evaluated on an Ultrasonix ultrasoun…
KTH Royal Institute of Technology（瑞典皇家理工学院）；Univrses AB（Univrses AB公司）
We consider the problem of tracking the 6D pose of a moving RGB-D camera in a neural scene representation. Different such representations have recently emerged, and we investigate the suitability of them for the task of camera tracking. In particular, we propose to track an RGB-D camera using a signed distance field-based representation and show that compared to density-based representations, tracking can be sped up, which enables more robust and accurate pose estimates when computation time is limited.
In this paper, we propose a novel method for separately estimating spectral distributions from images captured by a typical RGB camera. The proposed method allows us to separately estimate a spectral distribution of illumination, reflectance, or camera sensitivity, while recent hyperspectral cameras are limited to capturing a joint spectral distribution from a scene. In addition, the use of Bayesian inference makes it possible to take into account prior information of both spectral distributions and image noise as probability distributions. As a result, the proposed method can estimate spectra…
Universidade de Fortaleza（福塔莱萨大学）；Universidade Estadual do Ceará（塞阿拉州立大学）
Visual odometry is the process of estimating the position and orientation of a camera by analyzing the images associated to it. This paper develops a quick and accurate approach to visual odometry of a moving RGB-D camera navigating on a static environment. The proposed algorithm uses SURF (Speeded Up Robust Features) as feature extractor, RANSAC (Random Sample Consensus) to filter the results and Minimum Mean Square to estimate the rigid transformation of six parameters between successive video frames. Data from a Kinect camera were used in the tests. The results show that this approach is fe…
SpiralDiff: Spiral Diffusion with LoRA for RGB-to-RAW Conversion Across Cameras
School of Electrical and Information Engineering, Tianjin University（天津大学电气与信息工程学院）；State key laboratory of Smart Power Distribution Equipment and System, Tianjin University（天津大学智能电力分配设备与系统国家重点实验室）
University of Southern California（南加州大学）；Shanghai Jiao Tong University（上海交通大学）；Anhui Normal University（安徽师范大学）；The University of Tokyo（东京大学）
To reconstruct spectral signals from multi-channel observations, in particular trichromatic RGBs, has recently emerged as a promising alternative to traditional scanning-based spectral imager. It has been proven that the reconstruction accuracy relies heavily on the spectral response of the RGB camera in use. To improve accuracy, data-driven algorithms have been proposed to retrieve the best response curves of existing RGB cameras, or even to design brand new three-channel response curves. Instead, this paper explores the filter-array based color imaging mechanism of existing RGB cameras, and …
This manual is intended to provide a detailed description of the DIML/CVL RGB-D dataset. This dataset is comprised of 2M color images and their corresponding depth maps from a great variety of natural indoor and outdoor scenes. The indoor dataset was constructed using the Microsoft Kinect v2, while the outdoor dataset was built using the stereo cameras (ZED stereo camera and built-in stereo camera). Table I summarizes the details of our dataset, including acquisition, processing, format, and toolbox. Refer to Section II and III for more details.
Depth Over RGB: Automatic Evaluation of Open Surgery Skills Using Depth Camera
Technion – Israel Institute of Technology（以色列理工学院）；University of Wisconsin-Madison School of Medicine and Public Health（威斯康星大学麦迪逊分校医学与公共卫生学院）；University of Wisconsin Hospitals and Clinics（威斯康星大学医院与诊所）
Lightweight Interpretable RGB-Guided Hyperspectral Super-Resolution under Real Cross-resolution Misalignment
Univ. Grenoble Alpes（格勒诺布尔阿尔卑斯大学）；CNRS Grenoble INP（法国国家科学研究中心格勒诺布尔国立理工学院）；GIPSA-Lab（格勒诺布尔图像、信号、声学与自动化实验室）；Institut Universitaire de France (IUF)（法国大学研究院）
York University（约克大学）；Samsung AI Center – Toronto（三星人工智能中心多伦多分部）
Most camera images are rendered and saved in the standard RGB (sRGB) format by the camera's hardware. Due to the in-camera photo-finishing routines, nonlinear sRGB images are undesirable for computer vision tasks that assume a direct relationship between pixel values and scene radiance. For such applications, linear raw-RGB sensor images are preferred. Saving images in their raw-RGB format is still uncommon due to the large storage requirement and lack of support by many imaging applications. Several "raw reconstruction" methods have been proposed that utilize specialized metadata sampled from…
University of Washington（华盛顿大学）；Microsoft Research（微软研究院）
Numerous real-world applications have been driven by the recent algorithmic advancement of artificial intelligence (AI). Healthcare is no exception and AI technologies have great potential to revolutionize the industry. Non-contact camera-based physiological sensing, including remote photoplethysmography (rPPG), is a set of imaging methods that leverages ordinary RGB cameras (e.g., webcam or smartphone camera) to capture subtle changes in electromagnetic radiation (e.g., light) reflected by the body caused by physiological processes. RGB camera-based systems not only have the ability to measur…
We describe a learning-based system that estimates the camera position and orientation from a single input image relative to a known environment. The system is flexible w.r.t. the amount of information available at test and at training time, catering to different applications. Input images can be RGB-D or RGB, and a 3D model of the environment can be utilized for training but is not necessary. In the minimal case, our system requires only RGB images and ground truth poses at training time, and it requires only a single RGB image at test time. The framework consists of a deep neural network and…
Skolkovo Institute of Science and Technology（斯科尔科沃科学技术学院）
Nowadays, smartphones can produce a synchronized (synced) stream of high-quality data, including RGB images, inertial measurements, and other data. Therefore, smartphones are becoming appealing sensor systems in the robotics community. Unfortunately, there is still the need for external supporting sensing hardware, such as a depth camera precisely synced with the smartphone sensors. In this paper, we propose a hardware-software recording system that presents a heterogeneous structure and contains a smartphone and an external depth camera for recording visual, depth, and inertial data that are …
Université Laval（拉瓦尔大学）；Thales Digital Solutions（泰雷兹数字解决方案）；Inria（法国国家信息与自动化研究所）
Augmented reality devices require multiple sensors to perform various tasks such as localization and tracking. Currently, popular cameras are mostly frame-based (e.g. RGB and Depth) which impose a high data bandwidth and power usage. With the necessity for low power and more responsive augmented reality systems, using solely frame-based sensors imposes limits to the various algorithms that needs high frequency data from the environement. As such, event-based sensors have become increasingly popular due to their low power, bandwidth and latency, as well as their very high frequency data acquisi…
Università Politecnica delle Marche（马尔凯理工大学）；Grottini Lab srl（格罗蒂尼实验室有限公司）
The aim of this paper is to present an integrated system consisted of a RGB-D camera and a software able to monitor shoppers in intelligent retail environments. We propose an innovative low cost smart system that can understand the shoppers' behavior and, in particular, their interactions with the products in the shelves, with the aim to develop an automatic RGB-D technique for video analysis. The system of cameras detects the presence of people and univocally identifies them. Through the depth frames, the system detects the interactions of the shoppers with the products on the shelf and deter…
Mobile robots that manipulate their environments require high-accuracy scene understanding at close range. Typically this understanding is achieved with RGBD cameras, but the evaluation process for selecting an appropriate RGBD camera for the application is minimally quantitative. Limited manufacturer-published metrics do not translate to observed quality in real-world cluttered environments, since quality is application-specific. To bridge the gap, we present a method for quantitatively measuring depth quality using a set of extendable 3D printed fixtures that approximate real-world condition…
Max Planck Institute for Informatics（马克斯·普朗克信息学研究所）；Saarland University（萨尔大学）；Universidad Rey Juan Carlos（胡安卡洛斯国王大学）
We present the first real-time method to capture the full global 3D skeletal pose of a human in a stable, temporally consistent manner using a single RGB camera. Our method combines a new convolutional neural network (CNN) based pose regressor with kinematic skeleton fitting. Our novel fully-convolutional pose formulation regresses 2D and 3D joint positions jointly in real time and does not require tightly cropped input frames. A real-time kinematic skeleton fitting method uses the CNN output to yield temporally stable 3D global pose reconstructions on the basis of a coherent kinematic skeleto…
This paper presents an effective method for generating a spatiotemporal (time-varying) texture map for a dynamic object using a single RGB-D camera. The input of our framework is a 3D template model and an RGB-D image sequence. Since there are invisible areas of the object at a frame in a single-camera setup, textures of such areas need to be borrowed from other frames. We formulate the problem as an MRF optimization and define cost functions to reconstruct a plausible spatiotemporal texture for a dynamic object. Experimental results demonstrate that our spatiotemporal textures can reproduce t…
University of Modena and Reggio Emilia（摩德纳-雷焦艾米利亚大学）
Event cameras are biologically-inspired sensors that gather the temporal evolution of the scene. They capture pixel-wise brightness variations and output a corresponding stream of asynchronous events. Despite having multiple advantages with respect to traditional cameras, their use is partially prevented by the limited applicability of traditional data processing and vision algorithms. To this aim, we present a framework which exploits the output stream of event cameras to synthesize RGB frames, relying on an initial or a periodic set of color key-frames and the sequence of intermediate events…
Depth sensing is crucial for 3D reconstruction and scene understanding. Active depth sensors provide dense metric measurements, but often suffer from limitations such as restricted operating ranges, low spatial resolution, sensor interference, and high power consumption. In this paper, we propose a deep learning (DL) method to estimate per-pixel depth and its uncertainty continuously from a monocular video stream, with the goal of effectively turning an RGB camera into an RGB-D camera. Unlike prior DL-based methods, we estimate a depth probability distribution for each pixel rather than a sing…
Conventional image signal processing (ISP) frameworks are designed to reconstruct an RGB image from a single raw measurement. As multi-camera systems become increasingly popular these days, it is worth exploring improvements in ISP frameworks by incorporating raw measurements from multiple cameras. This manuscript is an intermediate progress report of a new ISP framework that is under development, StereoISP. It employs raw measurements from a stereo camera pair to generate a demosaicked, denoised RGB image by utilizing disparity estimated between the two views. We investigate StereoISP by test…
Conventional 2D Convolutional Neural Networks (CNN) extract features from an input image by applying linear filters. These filters compute the spatial coherence by weighting the photometric information on a fixed neighborhood without taking into account the geometric information. We tackle the problem of improving the classical RGB CNN methods by using the depth information provided by the RGB-D cameras. State-of-the-art approaches use depth as an additional channel or image (HHA) or pass from 2D CNN to 3D CNN. This paper proposes a novel and generic procedure to articulate both photometric an…
This paper proposes a concept of computer vision-based guidance assistance for agricultural vehicles to increase the accuracy in plowing and reduce driver's cognitive burden in long-lasting tillage operations. Plowing is a common agricultural practice to prepare the soil for planting in many countries and it can take place both in the spring and the fall. Since plowing operation requires high traction forces, it causes increased energy consumption. Moreover, longer operation time due to unnecessary maneuvers leads to higher fuel consumption. To provide necessary information for the driver and …
IT+Robotics（IT+机器人公司）；University of Padua（帕多瓦大学）；Sapienza University of Rome（罗马第一大学）
Color-depth cameras (RGB-D cameras) have become the primary sensors in most robotics systems, from service robotics to industrial robotics applications. Typical consumer-grade RGB-D cameras are provided with a coarse intrinsic and extrinsic calibration that generally does not meet the accuracy requirements needed by many robotics applications (e.g., highly accurate 3D environment reconstruction and mapping, high precision object recognition and localization, ...). In this paper, we propose a human-friendly, reliable and accurate calibration framework that enables to easily estimate both the in…
Recent promising effort for spectral reconstruction (SR) focuses on learning a complicated mapping through using a deeper and wider convolutional neural networks (CNNs). Nevertheless, most CNN-based SR algorithms neglect to explore the camera spectral sensitivity (CSS) prior and interdependencies among intermediate features, thus limiting the representation ability of the network and performance of SR. To conquer these issues, we propose a novel adaptive weighted attention network (AWAN) for SR, whose backbone is stacked with multiple dual residual attention blocks (DRAB) decorating with long …
Hong Kong University of Science and Technology（香港科技大学）；Massachusetts Institute of Technology（麻省理工学院）
Although there has been significant progress in the past decade,tracking is still a very challenging computer vision task, due to problems such as occlusion and model drift.Recently, the increased popularity of depth sensors e.g. Microsoft Kinect has made it easy to obtain depth data at low cost.This may be a game changer for tracking, since depth information can be used to prevent model drift and handle occlusion.In this paper, we construct a benchmark dataset of 100 RGBD videos with high diversity, including deformable objects, various occlusion conditions and moving cameras. We propose a ve…
State Key Lab of CAD&CG, Zhejiang University（浙江大学CAD&CG国家重点实验室）；Robotics Institute, Carnegie Mellon University（卡内基梅隆大学机器人研究所）
In this paper, we present RKD-SLAM, a robust keyframe-based dense SLAM approach for an RGB-D camera that can robustly handle fast motion and dense loop closure, and run without time limitation in a moderate size scene. It not only can be used to scan high-quality 3D models, but also can satisfy the demand of VR and AR applications. First, we combine color and depth information to construct a very fast keyframe-based tracking method on a CPU, which can work robustly in challenging cases (e.g.~fast camera motion and complex loops). For reducing accumulation error, we also introduce a very effici…
CSIRO Data61（联邦科学与工业研究组织数据61所）；Queensland University of Technology（昆士兰科技大学）
We present a novel non-rigid reconstruction method using a moving RGB-D camera. Current approaches use only non-rigid part of the scene and completely ignore the rigid background. Non-rigid parts often lack sufficient geometric and photometric information for tracking large frame-to-frame motion. Our approach uses camera pose estimated from the rigid background for foreground tracking. This enables robust foreground tracking in situations where large frame-to-frame motion occurs. Moreover, we are proposing a multi-scale deformation graph which improves non-rigid tracking without compromising t…
While the LED panels used in virtual production systems can display vibrant imagery with a wide color gamut, they produce problematic color shifts when used as lighting due to their peaky spectral output from narrow-band red, green, and blue LEDs. In this work, we present an improved color calibration process for virtual production stages which ameliorates this color rendition problem while also passing through accurate in-camera background colors. We do this by optimizing linear color correction transformations for 1) the LED panel pixels visible in the field of view of the camera, 2) the pix…
Seoul National University（首尔国立大学）；Kwangwoon University（光云大学）
Although significant improvement has been achieved recently in 3D human pose estimation, most of the previous methods only treat a single-person case. In this work, we firstly propose a fully learning-based, camera distance-aware top-down approach for 3D multi-person pose estimation from a single RGB image. The pipeline of the proposed system consists of human detection, absolute 3D human root localization, and root-relative 3D single-person pose estimation modules. Our system achieves comparable results with the state-of-the-art 3D single-person pose estimation models without any groundtruth …
This paper presents a robust and efficient semi-dense visual odometry solution for RGB-D cameras. The core of our method is a 2D-3D ICP pipeline which estimates the pose of the sensor by registering the projection of a 3D semi-dense map of the reference frame with the 2D semi-dense region extracted in the current frame. The processing is speeded up by efficiently implemented approximate nearest neighbour fields under the Euclidean distance criterion, which permits the use of compact Gauss-Newton updates in the optimization. The registration is formulated as a maximum a posterior problem to dea…
Laboratoire de recherche en Imagerie et Orthopédie (LIO)（影像与骨科研究实验室（LIO））；TÉLUQ University（加拿大远程大学）
The emergence of RGB-D sensors offered new possibilities for addressing complex artificial vision problems efficiently. Human posture recognition is among these computer vision problems, with a wide range of applications such as ambient assisted living and intelligent health care systems. In this context, our paper presents novel methods and ideas to design automatic posture recognition systems using an RGB-D camera. More specifically, we introduce two supervised methods to learn and recognize human postures using the main types of visual data provided by an RGB-D camera. The first method is b…
Image reconstruction techniques such as denoising often need to be applied to the RGB output of cameras and cellphones. Unfortunately, the commonly used additive white noise (AWGN) models do not accurately reproduce the noise and the degradation encountered on these inputs. This is particularly important for learning-based techniques, because the mismatch between training and real world data will hurt their generalization. This paper aims to accurately simulate the degradation and noise transformation performed by camera pipelines. This allows us to generate realistic degradation in RGB images…
RGB cameras are one of the most relevant sensors for autonomous driving applications. It is undeniable that failures of vehicle cameras may compromise the autonomous driving task, possibly leading to unsafe behaviors when images that are subsequently processed by the driving system are altered. To support the definition of safe and robust vehicle architectures and intelligent systems, in this paper we define the failure modes of a vehicle camera, together with an analysis of effects and known mitigations. Further, we build a software library for the generation of the corresponding failed image…
Iran Broadcasting University (IRIBU)（伊朗广播大学（IRIBU））；Alpha Reality
Indoor positioning aims at navigation inside areas with no GPS-data availability and could be employed in many applications such as augmented reality, autonomous driving specially inside closed areas and tunnels. In this paper, a deep neural network-based architecture has been proposed to address this problem. In this regard, a tandem set of convolutional neural networks, as well as a Pix2Pix GAN network have been leveraged to perform as the scene classifier, scene RGB image to point cloud converter, and position regressor, respectively. The proposed architecture outperforms the previous works…
The University of Hong Kong（香港大学）；Max Planck Institute for Informatics（马克斯·普朗克信息学研究所）；National Tsing Hua University（国立清华大学）
Thin structures, such as wire-frame sculptures, fences, cables, power lines, and tree branches, are common in the real world. It is extremely challenging to acquire their 3D digital models using traditional image-based or depth-based reconstruction methods because thin structures often lack distinct point features and have severe self-occlusion. We propose the first approach that simultaneously estimates camera motion and reconstructs the geometry of complex 3D thin structures in high quality from a color video captured by a handheld camera. Specifically, we present a new curve-based approach …
Human motion capture is frequently used to study rehabilitation and clinical problems, as well as to provide realistic animation for the entertainment industry. IMU-based systems, as well as Marker-based motion tracking systems, are the most popular methods to track movement due to their low cost of implementation and lightweight. This paper proposes a quaternion-based Extended Kalman filter approach to recover the human leg segments motions with a set of IMU sensors data fused with camera-marker system data. In this paper, an Extended Kalman Filter approach is developed to fuse the data of tw…
Depth map fusion is an essential part in both stereo and RGB-D based 3-D reconstruction pipelines. Whether produced with a passive stereo reconstruction or using an active depth sensor, such as Microsoft Kinect, the depth maps have noise and may have poor initial registration. In this paper, we introduce a method which is capable of handling outliers, and especially, even significant registration errors. The proposed method first fuses a sequence of depth maps into a single non-redundant point cloud so that the redundant points are merged together by giving more weight to more certain measurem…
Polarimetric imaging has been applied in a growing number of applications in robotic vision (ex. underwater navigation, glare removal, de-hazing, object classification, and depth estimation). One can find on the market RGB Polarization cameras that can capture both color and polarimetric state of the light in a single snapshot. Due to the sensor's characteristic dispersion, and the use of lenses, it is crucial to calibrate these types of cameras so as to obtain correct polarization measurements. The calibration methods that have been developed so far are either not adapted to this type of came…
This work presents a flexible system to reconstruct 3D models of objects captured with an RGB-D sensor. A major advantage of the method is that our reconstruction pipeline allows the user to acquire a full 3D model of the object. This is achieved by acquiring several partial 3D models in different sessions that are automatically merged together to reconstruct a full model. In addition, the 3D models acquired by our system can be directly used by state-of-the-art object instance recognition and object tracking modules, providing object-perception capabilities for different applications, such as…
This paper proposes a novel system to estimate and track the 3D poses of multiple persons in calibrated RGB-Depth camera networks. The multi-view 3D pose of each person is computed by a central node which receives the single-view outcomes from each camera of the network. Each single-view outcome is computed by using a CNN for 2D pose estimation and extending the resulting skeletons to 3D by means of the sensor depth. The proposed system is marker-less, multi-person, independent of background and does not make any assumption on people appearance and initial pose. The system provides real-time o…
Johns Hopkins University（约翰斯·霍普金斯大学）；Siemens AG（西门子股份公司）；Technical University of Munich（慕尼黑工业大学）
Despite recent advances on the topic of direct camera pose regression using neural networks, accurately estimating the camera pose of a single RGB image still remains a challenging task. To address this problem, we introduce a novel framework based, in its core, on the idea of implicitly learning the joint distribution of RGB images and their corresponding camera poses using a discriminator network and adversarial learning. Our method allows not only to regress the camera pose from a single image, however, also offers a solely RGB-based solution for camera pose refinement using the discriminat…
