RGB cameras are one of the most relevant sensors for autonomous driving applications. It is undeniable that failures of vehicle cameras may compromise the autonomous driving task, possibly leading to unsafe behaviors when images that are subsequently processed by the driving system are altered. To support the definition of safe and robust vehicle architectures and intelligent systems, in this paper we define the failure modes of a vehicle camera, together with an analysis of effects and known mitigations. Further, we build a software library for the generation of the corresponding failed images and we feed them to six object detectors for mono and stereo cameras and to the self-driving agent of an autonomous driving simulator. The resulting misbehaviors with respect to operating with clean images allow a better understanding of failures effects and the related safety risks in image-based applications.
Faculty of Media Technology and Engineering, Iran Broadcasting University（伊朗广播大学媒体技术与工程学院）；Alpha Reality, AR/VR Solution Company（Alpha Reality AR/VR解决方案公司）
Indoor positioning and navigation inside an area with no GPS-data availability is a challenging problem. There are applications such as augmented reality, autonomous driving, navigation of drones inside tunnels, in which indoor positioning gets crucial. In this paper, a tandem architecture of deep network-based systems, for the first time to our knowledge, is developed to address this problem. This structure is trained on the scene images being obtained through scanning of the desired area segments using photogrammetry. A CNN structure based on EfficientNet is trained as a classifier of the sc…
VNU University of Engineering and Technology（越南国立大学工程与技术大学）
This paper addresses the problem of lane detection which is fundamental for self-driving vehicles. Our approach exploits both colour and depth information recorded by a single RGB-D camera to better deal with negative factors such as lighting conditions and lane-like objects. In the approach, colour and depth images are first converted to a half-binary format and a 2D matrix of 3D points. They are then used as the inputs of template matching and geometric feature extraction processes to form a response map so that its values represent the probability of pixels being lane markers. To further im…
ECHO: Event-Augmented Context with Hindsight and Outlook for Wrist-Only Manipulation
The Hong Kong University of Science and Technology（香港科技大学）；The University of British Columbia（不列颠哥伦比亚大学）；MMLab, The Chinese University of Hong Kong（香港中文大学多媒体实验室）；Astribot；ZENBOT
Dalian University of Technology（大连理工大学）；Peng Cheng Laboratory（鹏城实验室）
Compared with traditional RGB-only visual tracking, few datasets have been constructed for RGB-D tracking. In this paper, we propose ARKitTrack, a new RGB-D tracking dataset for both static and dynamic scenes captured by consumer-grade LiDAR scanners equipped on Apple's iPhone and iPad. ARKitTrack contains 300 RGB-D sequences, 455 targets, and 229.7K video frames in total. Along with the bounding box annotations and frame-level attributes, we also annotate this dataset with 123.9K pixel-level target masks. Besides, the camera intrinsic and camera pose of each frame are provided for future deve…
We describe a learning-based system that estimates the camera position and orientation from a single input image relative to a known environment. The system is flexible w.r.t. the amount of information available at test and at training time, catering to different applications. Input images can be RGB-D or RGB, and a 3D model of the environment can be utilized for training but is not necessary. In the minimal case, our system requires only RGB images and ground truth poses at training time, and it requires only a single RGB image at test time. The framework consists of a deep neural network and…
KTH Royal Institute of Technology（瑞典皇家理工学院）；Univrses AB（Univrses AB公司）
We consider the problem of tracking the 6D pose of a moving RGB-D camera in a neural scene representation. Different such representations have recently emerged, and we investigate the suitability of them for the task of camera tracking. In particular, we propose to track an RGB-D camera using a signed distance field-based representation and show that compared to density-based representations, tracking can be sped up, which enables more robust and accurate pose estimates when computation time is limited.
We introduce DROID-SLAM, a new deep learning based SLAM system. DROID-SLAM consists of recurrent iterative updates of camera pose and pixelwise depth through a Dense Bundle Adjustment layer. DROID-SLAM is accurate, achieving large improvements over prior work, and robust, suffering from substantially fewer catastrophic failures. Despite training on monocular video, it can leverage stereo or RGB-D video to achieve improved performance at test time. The URL to our open source code is https://github.com/princeton-vl/DROID-SLAM.
Universidade de Fortaleza（福塔莱萨大学）；Universidade Estadual do Ceará（塞阿拉州立大学）
Visual odometry is the process of estimating the position and orientation of a camera by analyzing the images associated to it. This paper develops a quick and accurate approach to visual odometry of a moving RGB-D camera navigating on a static environment. The proposed algorithm uses SURF (Speeded Up Robust Features) as feature extractor, RANSAC (Random Sample Consensus) to filter the results and Minimum Mean Square to estimate the rigid transformation of six parameters between successive video frames. Data from a Kinect camera were used in the tests. The results show that this approach is fe…
SpiralDiff: Spiral Diffusion with LoRA for RGB-to-RAW Conversion Across Cameras
School of Electrical and Information Engineering, Tianjin University（天津大学电气与信息工程学院）；State key laboratory of Smart Power Distribution Equipment and System, Tianjin University（天津大学智能电力分配设备与系统国家重点实验室）
University of Oxford（牛津大学）；University of Glasgow（格拉斯哥大学）；Shanghai Jiao Tong University（上海交通大学）
With the increasing awareness of high-quality life, there is a growing need for health monitoring devices running robust algorithms in home environment. Health monitoring technologies enable real-time analysis of users' health status, offering long-term healthcare support and reducing hospitalization time. The purpose of this work is twofold, the software focuses on the analysis of gait, which is widely adopted for joint correction and assessing any lower limb or spinal problem. On the hardware side, we design a novel marker-less gait analysis device using a low-cost RGB camera mounted on a mo…
University of Washington（华盛顿大学）；Microsoft Research（微软研究院）
Numerous real-world applications have been driven by the recent algorithmic advancement of artificial intelligence (AI). Healthcare is no exception and AI technologies have great potential to revolutionize the industry. Non-contact camera-based physiological sensing, including remote photoplethysmography (rPPG), is a set of imaging methods that leverages ordinary RGB cameras (e.g., webcam or smartphone camera) to capture subtle changes in electromagnetic radiation (e.g., light) reflected by the body caused by physiological processes. RGB camera-based systems not only have the ability to measur…
Understanding three-dimensional (3D) geometries from two-dimensional (2D) images without any labeled information is promising for understanding the real world without incurring annotation cost. We herein propose a novel generative model, RGBD-GAN, which achieves unsupervised 3D representation learning from 2D images. The proposed method enables camera parameter-conditional image generation and depth image generation without any 3D annotations, such as camera poses or depth. We use an explicit 3D consistency loss for two RGBD images generated from different camera parameters, in addition to the…
This manual is intended to provide a detailed description of the DIML/CVL RGB-D dataset. This dataset is comprised of 2M color images and their corresponding depth maps from a great variety of natural indoor and outdoor scenes. The indoor dataset was constructed using the Microsoft Kinect v2, while the outdoor dataset was built using the stereo cameras (ZED stereo camera and built-in stereo camera). Table I summarizes the details of our dataset, including acquisition, processing, format, and toolbox. Refer to Section II and III for more details.
Depth Over RGB: Automatic Evaluation of Open Surgery Skills Using Depth Camera
Technion – Israel Institute of Technology（以色列理工学院）；University of Wisconsin-Madison School of Medicine and Public Health（威斯康星大学麦迪逊分校医学与公共卫生学院）；University of Wisconsin Hospitals and Clinics（威斯康星大学医院与诊所）
Skolkovo Institute of Science and Technology（斯科尔科沃科学技术学院）
Nowadays, smartphones can produce a synchronized (synced) stream of high-quality data, including RGB images, inertial measurements, and other data. Therefore, smartphones are becoming appealing sensor systems in the robotics community. Unfortunately, there is still the need for external supporting sensing hardware, such as a depth camera precisely synced with the smartphone sensors. In this paper, we propose a hardware-software recording system that presents a heterogeneous structure and contains a smartphone and an external depth camera for recording visual, depth, and inertial data that are …
Max Planck Institute for Informatics（马克斯·普朗克信息学研究所）；Saarland University（萨尔大学）；Universidad Rey Juan Carlos（胡安卡洛斯国王大学）
We present the first real-time method to capture the full global 3D skeletal pose of a human in a stable, temporally consistent manner using a single RGB camera. Our method combines a new convolutional neural network (CNN) based pose regressor with kinematic skeleton fitting. Our novel fully-convolutional pose formulation regresses 2D and 3D joint positions jointly in real time and does not require tightly cropped input frames. A real-time kinematic skeleton fitting method uses the CNN output to yield temporally stable 3D global pose reconstructions on the basis of a coherent kinematic skeleto…
This paper presents an effective method for generating a spatiotemporal (time-varying) texture map for a dynamic object using a single RGB-D camera. The input of our framework is a 3D template model and an RGB-D image sequence. Since there are invisible areas of the object at a frame in a single-camera setup, textures of such areas need to be borrowed from other frames. We formulate the problem as an MRF optimization and define cost functions to reconstruct a plausible spatiotemporal texture for a dynamic object. Experimental results demonstrate that our spatiotemporal textures can reproduce t…
British Malaysian Institute, Universiti Kuala Lumpur（吉隆坡大学英马学院）；Malaysian Institute of Information Technology, Universiti Kuala Lumpur（吉隆坡大学马来西亚信息技术学院）；International Islamic University, Malaysia（马来西亚国际伊斯兰大学）；Effat University（埃法特大学）
The use of motion capture has increased from last decade in a varied spectrum of applications like film special effects, controlling games and robots, rehabilitation system, animations etc. The current human motion capture techniques use markers, structured environment, and high resolution cameras in a dedicated environment. Because of rapid movement, elbow angle estimation is observed as the most difficult problem in human motion capture system. In this paper, we take elbow angle estimation as our research subject and propose a novel, markerless and cost-effective solution that uses RGB camer…
Université Laval（拉瓦尔大学）；Thales Digital Solutions（泰雷兹数字解决方案）；Inria（法国国家信息与自动化研究所）
Augmented reality devices require multiple sensors to perform various tasks such as localization and tracking. Currently, popular cameras are mostly frame-based (e.g. RGB and Depth) which impose a high data bandwidth and power usage. With the necessity for low power and more responsive augmented reality systems, using solely frame-based sensors imposes limits to the various algorithms that needs high frequency data from the environement. As such, event-based sensors have become increasingly popular due to their low power, bandwidth and latency, as well as their very high frequency data acquisi…
IT+Robotics（IT+机器人公司）；University of Padua（帕多瓦大学）；Sapienza University of Rome（罗马第一大学）
Color-depth cameras (RGB-D cameras) have become the primary sensors in most robotics systems, from service robotics to industrial robotics applications. Typical consumer-grade RGB-D cameras are provided with a coarse intrinsic and extrinsic calibration that generally does not meet the accuracy requirements needed by many robotics applications (e.g., highly accurate 3D environment reconstruction and mapping, high precision object recognition and localization, ...). In this paper, we propose a human-friendly, reliable and accurate calibration framework that enables to easily estimate both the in…
Università Politecnica delle Marche（马尔凯理工大学）；Grottini Lab srl（格罗蒂尼实验室有限公司）
The aim of this paper is to present an integrated system consisted of a RGB-D camera and a software able to monitor shoppers in intelligent retail environments. We propose an innovative low cost smart system that can understand the shoppers' behavior and, in particular, their interactions with the products in the shelves, with the aim to develop an automatic RGB-D technique for video analysis. The system of cameras detects the presence of people and univocally identifies them. Through the depth frames, the system detects the interactions of the shoppers with the products on the shelf and deter…
University of Modena and Reggio Emilia（摩德纳-雷焦艾米利亚大学）
Event cameras are biologically-inspired sensors that gather the temporal evolution of the scene. They capture pixel-wise brightness variations and output a corresponding stream of asynchronous events. Despite having multiple advantages with respect to traditional cameras, their use is partially prevented by the limited applicability of traditional data processing and vision algorithms. To this aim, we present a framework which exploits the output stream of event cameras to synthesize RGB frames, relying on an initial or a periodic set of color key-frames and the sequence of intermediate events…
While the LED panels used in virtual production systems can display vibrant imagery with a wide color gamut, they produce problematic color shifts when used as lighting due to their peaky spectral output from narrow-band red, green, and blue LEDs. In this work, we present an improved color calibration process for virtual production stages which ameliorates this color rendition problem while also passing through accurate in-camera background colors. We do this by optimizing linear color correction transformations for 1) the LED panel pixels visible in the field of view of the camera, 2) the pix…
Depth sensing is crucial for 3D reconstruction and scene understanding. Active depth sensors provide dense metric measurements, but often suffer from limitations such as restricted operating ranges, low spatial resolution, sensor interference, and high power consumption. In this paper, we propose a deep learning (DL) method to estimate per-pixel depth and its uncertainty continuously from a monocular video stream, with the goal of effectively turning an RGB camera into an RGB-D camera. Unlike prior DL-based methods, we estimate a depth probability distribution for each pixel rather than a sing…
An accurate and robust large-scale localization system is an integral component for active areas of research such as autonomous vehicles and augmented reality. To this end, many learning algorithms have been proposed that predict 6DOF camera pose from RGB or RGB-D images. However, previous methods that incorporate depth typically treat the data the same way as RGB images, often adding depth maps as additional channels to RGB images and passing them through convolutional neural networks (CNNs). In this paper, we show that converting depth maps into pseudo-LiDAR signals, previously shown to be u…
Conventional image signal processing (ISP) frameworks are designed to reconstruct an RGB image from a single raw measurement. As multi-camera systems become increasingly popular these days, it is worth exploring improvements in ISP frameworks by incorporating raw measurements from multiple cameras. This manuscript is an intermediate progress report of a new ISP framework that is under development, StereoISP. It employs raw measurements from a stereo camera pair to generate a demosaicked, denoised RGB image by utilizing disparity estimated between the two views. We investigate StereoISP by test…
Conventional 2D Convolutional Neural Networks (CNN) extract features from an input image by applying linear filters. These filters compute the spatial coherence by weighting the photometric information on a fixed neighborhood without taking into account the geometric information. We tackle the problem of improving the classical RGB CNN methods by using the depth information provided by the RGB-D cameras. State-of-the-art approaches use depth as an additional channel or image (HHA) or pass from 2D CNN to 3D CNN. This paper proposes a novel and generic procedure to articulate both photometric an…
This paper proposes a concept of computer vision-based guidance assistance for agricultural vehicles to increase the accuracy in plowing and reduce driver's cognitive burden in long-lasting tillage operations. Plowing is a common agricultural practice to prepare the soil for planting in many countries and it can take place both in the spring and the fall. Since plowing operation requires high traction forces, it causes increased energy consumption. Moreover, longer operation time due to unnecessary maneuvers leads to higher fuel consumption. To provide necessary information for the driver and …
State Key Lab of CAD&CG, Zhejiang University（浙江大学CAD&CG国家重点实验室）；Robotics Institute, Carnegie Mellon University（卡内基梅隆大学机器人研究所）
In this paper, we present RKD-SLAM, a robust keyframe-based dense SLAM approach for an RGB-D camera that can robustly handle fast motion and dense loop closure, and run without time limitation in a moderate size scene. It not only can be used to scan high-quality 3D models, but also can satisfy the demand of VR and AR applications. First, we combine color and depth information to construct a very fast keyframe-based tracking method on a CPU, which can work robustly in challenging cases (e.g.~fast camera motion and complex loops). For reducing accumulation error, we also introduce a very effici…
We introduce a method for 3D object detection using a single monocular image. Starting from a synthetic dataset, we pre-train an RGB-to-Depth Auto-Encoder (AE). The embedding learnt from this AE is then used to train a 3D Object Detector (3DOD) CNN which is used to regress the parameters of 3D object poses after the encoder from the AE generates a latent embedding from the RGB image. We show that we can pre-train the AE using paired RGB and depth images from simulation data once and subsequently only train the 3DOD network using real data, comprising of RGB images and 3D object pose labels (wi…
CSIRO Data61（联邦科学与工业研究组织数据61所）；Queensland University of Technology（昆士兰科技大学）
We present a novel non-rigid reconstruction method using a moving RGB-D camera. Current approaches use only non-rigid part of the scene and completely ignore the rigid background. Non-rigid parts often lack sufficient geometric and photometric information for tracking large frame-to-frame motion. Our approach uses camera pose estimated from the rigid background for foreground tracking. This enables robust foreground tracking in situations where large frame-to-frame motion occurs. Moreover, we are proposing a multi-scale deformation graph which improves non-rigid tracking without compromising t…
Seoul National University（首尔国立大学）；Kwangwoon University（光云大学）
Although significant improvement has been achieved recently in 3D human pose estimation, most of the previous methods only treat a single-person case. In this work, we firstly propose a fully learning-based, camera distance-aware top-down approach for 3D multi-person pose estimation from a single RGB image. The pipeline of the proposed system consists of human detection, absolute 3D human root localization, and root-relative 3D single-person pose estimation modules. Our system achieves comparable results with the state-of-the-art 3D single-person pose estimation models without any groundtruth …
This paper presents a robust and efficient semi-dense visual odometry solution for RGB-D cameras. The core of our method is a 2D-3D ICP pipeline which estimates the pose of the sensor by registering the projection of a 3D semi-dense map of the reference frame with the 2D semi-dense region extracted in the current frame. The processing is speeded up by efficiently implemented approximate nearest neighbour fields under the Euclidean distance criterion, which permits the use of compact Gauss-Newton updates in the optimization. The registration is formulated as a maximum a posterior problem to dea…
Laboratoire de recherche en Imagerie et Orthopédie (LIO)（影像与骨科研究实验室（LIO））；TÉLUQ University（加拿大远程大学）
The emergence of RGB-D sensors offered new possibilities for addressing complex artificial vision problems efficiently. Human posture recognition is among these computer vision problems, with a wide range of applications such as ambient assisted living and intelligent health care systems. In this context, our paper presents novel methods and ideas to design automatic posture recognition systems using an RGB-D camera. More specifically, we introduce two supervised methods to learn and recognize human postures using the main types of visual data provided by an RGB-D camera. The first method is b…
Image reconstruction techniques such as denoising often need to be applied to the RGB output of cameras and cellphones. Unfortunately, the commonly used additive white noise (AWGN) models do not accurately reproduce the noise and the degradation encountered on these inputs. This is particularly important for learning-based techniques, because the mismatch between training and real world data will hurt their generalization. This paper aims to accurately simulate the degradation and noise transformation performed by camera pipelines. This allows us to generate realistic degradation in RGB images…
This paper proposes a novel system to estimate and track the 3D poses of multiple persons in calibrated RGB-Depth camera networks. The multi-view 3D pose of each person is computed by a central node which receives the single-view outcomes from each camera of the network. Each single-view outcome is computed by using a CNN for 2D pose estimation and extending the resulting skeletons to 3D by means of the sensor depth. The proposed system is marker-less, multi-person, independent of background and does not make any assumption on people appearance and initial pose. The system provides real-time o…
PFM-VEPAR: Prompting Foundation Models for RGB-Event Camera based Pedestrian Attribute Recognition
City University of Macau（澳门城市大学）；Zhuhai College of Science and Technology（珠海科学技术学院）；Macau University of Science and Technology（澳门科学大学）；School of Computer Science and Technology, Anhui University（安徽大学计算机科学与技术学院）
In this paper, we propose a novel method for separately estimating spectral distributions from images captured by a typical RGB camera. The proposed method allows us to separately estimate a spectral distribution of illumination, reflectance, or camera sensitivity, while recent hyperspectral cameras are limited to capturing a joint spectral distribution from a scene. In addition, the use of Bayesian inference makes it possible to take into account prior information of both spectral distributions and image noise as probability distributions. As a result, the proposed method can estimate spectra…
College of Optical and Electronic Technology, China Jiliang University（中国计量大学光学与电子科技学院）
Hyperspectral image (HSI) contains both spatial pattern and spectral information which has been widely used in food safety, remote sensing, and medical detection. However, the acquisition of hyperspectral images is usually costly due to the complicated apparatus for the acquisition of optical spectrum. Recently, it has been reported that HSI can be reconstructed from single RGB image using convolution neural network (CNN) algorithms. Compared with the traditional hyperspectral cameras, the method based on CNN algorithms is simple, portable and low cost. In this study, we focused on the influen…
Iran Broadcasting University (IRIBU)（伊朗广播大学（IRIBU））；Alpha Reality
Indoor positioning aims at navigation inside areas with no GPS-data availability and could be employed in many applications such as augmented reality, autonomous driving specially inside closed areas and tunnels. In this paper, a deep neural network-based architecture has been proposed to address this problem. In this regard, a tandem set of convolutional neural networks, as well as a Pix2Pix GAN network have been leveraged to perform as the scene classifier, scene RGB image to point cloud converter, and position regressor, respectively. The proposed architecture outperforms the previous works…
Active depth cameras suffer from several limitations, which cause incomplete and noisy depth maps, and may consequently affect the performance of RGB-D Odometry. To address this issue, this paper presents a visual odometry method based on point and line features that leverages both measurements from a depth sensor and depth estimates from camera motion. Depth estimates are generated continuously by a probabilistic depth estimation framework for both types of features to compensate for the lack of depth measurements and inaccurate feature depth associations. The framework models explicitly the …
University of Science and Technology of China（中国科学技术大学）；Alibaba Group（阿里巴巴集团）
We propose Neural-DynamicReconstruction (NDR), a template-free method to recover high-fidelity geometry and motions of a dynamic scene from a monocular RGB-D camera. In NDR, we adopt the neural implicit function for surface representation and rendering such that the captured color and depth can be fully utilized to jointly optimize the surface and deformations. To represent and constrain the non-rigid deformations, we propose a novel neural invertible deforming network such that the cycle consistency between arbitrary two frames is automatically satisfied. Considering that the surface topology…
Human motion capture is frequently used to study rehabilitation and clinical problems, as well as to provide realistic animation for the entertainment industry. IMU-based systems, as well as Marker-based motion tracking systems, are the most popular methods to track movement due to their low cost of implementation and lightweight. This paper proposes a quaternion-based Extended Kalman filter approach to recover the human leg segments motions with a set of IMU sensors data fused with camera-marker system data. In this paper, an Extended Kalman Filter approach is developed to fuse the data of tw…
Depth map fusion is an essential part in both stereo and RGB-D based 3-D reconstruction pipelines. Whether produced with a passive stereo reconstruction or using an active depth sensor, such as Microsoft Kinect, the depth maps have noise and may have poor initial registration. In this paper, we introduce a method which is capable of handling outliers, and especially, even significant registration errors. The proposed method first fuses a sequence of depth maps into a single non-redundant point cloud so that the redundant points are merged together by giving more weight to more certain measurem…
Polarimetric imaging has been applied in a growing number of applications in robotic vision (ex. underwater navigation, glare removal, de-hazing, object classification, and depth estimation). One can find on the market RGB Polarization cameras that can capture both color and polarimetric state of the light in a single snapshot. Due to the sensor's characteristic dispersion, and the use of lenses, it is crucial to calibrate these types of cameras so as to obtain correct polarization measurements. The calibration methods that have been developed so far are either not adapted to this type of came…
This work presents a flexible system to reconstruct 3D models of objects captured with an RGB-D sensor. A major advantage of the method is that our reconstruction pipeline allows the user to acquire a full 3D model of the object. This is achieved by acquiring several partial 3D models in different sessions that are automatically merged together to reconstruct a full model. In addition, the 3D models acquired by our system can be directly used by state-of-the-art object instance recognition and object tracking modules, providing object-perception capabilities for different applications, such as…
We propose a method to build in real-time animated 3D head models using a consumer-grade RGB-D camera. Our proposed method is the first one to provide simultaneously comprehensive facial motion tracking and a detailed 3D model of the user's head. Anyone's head can be instantly reconstructed and his facial motion captured without requiring any training or pre-scanning. The user starts facing the camera with a neutral expression in the first frame, but is free to move, talk and change his face expression as he wills otherwise. The facial motion is captured using a blendshape animation model whil…
