This paper reviews the state of the art channel coding techniques for ultra-reliable low latency communication (URLLC). The stringent requirements of URLLC services, such as ultra-high reliability and low latency, have made it the most challenging feature of the fifth generation (5G) mobile systems. The problem is even more challenging for the services beyond the 5G promise, such as tele-surgery and factory automation, which require latencies less than 1ms and failure rate as low as $10^{-9}$. The very low latency requirements of URLLC do not allow traditional approaches such as re-transmission to be used to increase the reliability. On the other hand, to guarantee the delay requirements, the block length needs to be small, so conventional channel codes, originally designed and optimised for moderate-to-long block-lengths, show notable deficiencies for short blocks. This paper provides an overview on channel coding techniques for short block lengths and compares them in terms of performance and complexity. Several important research directions are identified and discussed in more detail with several possible solutions.
Rate-Splitting Multiple Access (RSMA) is an emerging flexible and powerful multiple access for downlink multiantenna networks. In this paper, we introduce the concept of RSMA into short-packet downlink communications. We design optimal linear precoders that maximize the sum rate with Finite Blocklength (FBL) constraints. The relations between the sum rate and blocklength of RSMA are investigated for a wide range of network loads and user deployments. Numerical results demonstrate that RSMA can achieve the same transmission rate as Non-Orthogonal Multiple Access (NOMA) and Space Division Multip…
Future autonomous systems require wireless connectivity able to support extremely stringent requirements on both latency and reliability. In this paper, we leverage recent developments in the field of finite-blocklength information theory to illustrate how to optimally design wireless systems in the presence of such stringent constraints. Focusing on a multi-antenna Rayleigh block-fading channel, we obtain bounds on the maximum number of bits that can be transmitted within given bandwidth, latency, and reliability constraints, using an orthogonal frequency-division multiplexing system similar …
Low decoding latency and complexity are two important requirements of channel codes used in many applications, like machine-to-machine communications. In this paper, we show how these requirements can be fulfilled by using some special quasi-cyclic low-density parity-check block codes and spatially coupled low-density parity-check convolutional codes that we denote as compact. They are defined by parity-check matrices designed according to a recent approach based on sequentially multiplied columns. This method allows obtaining codes with girth up to 12. Many numerical examples of practical cod…
Ultra-reliability and low-latency are two key components in 5G networks. In this letter, we investigate the problem of ultra-reliable and low-latency communication (URLLC) in millimeter wave (mmWave)-enabled massive multiple-input multiple-output (MIMO) networks. The problem is cast as a network utility maximization subject to probabilistic latency and reliability constraints. To solve this problem, we resort to the Lyapunov technique whereby a utility-delay control approach is proposed, which adapts to channel variations and queue dynamics. Numerical results demonstrate that our proposed appr…
The fifth-generation cellular mobile networks are expected to support mission critical ultra-reliable low latency communication (URLLC) services in addition to the enhanced mobile broadband applications. This article first introduces three emerging mission critical applications of URLLC and identifies their requirements on end-to-end latency and reliability. We then investigate the various sources of end-to-end delay of current wireless networks by taking the 4G Long Term Evolution (LTE) as an example. Subsequently, we propose and evaluate several techniques to reduce the end-to-end latency fr…
With the phenomenal growth of the Internet of Things (IoT), Ultra Reliable Low Latency Communications (URLLC) has potentially been the enabler to guarantee the stringent requirements on latency and reliability. However, how to achieve low latency and ultra-reliability with the random arrival remains open. In this paper, a queue-aware variable-length channel coding is presented over the single URLLC user link, in which the finite blocklength of channel coding is determined based on the random arrival. More particularly, a cross-layer approach is proposed for the URLLC user to establish the opti…
Low-rate and short-packet transmissions are important for ultra-reliable low-latency communications (URLLC). In this paper, we put forth a new family of sparse superposition codes for URLLC, called block orthogonal sparse superposition (BOSS) codes. We first present a code construction method for the efficient encoding of BOSS codes. The key idea is to construct codewords by the superposition of the orthogonal columns of a dictionary matrix with a sequential bit mapping strategy. We also propose an approximate maximum a posteriori probability (MAP) decoder with two stages. The approximate MAP …
Future networks are expected to support various ultra-reliable low-latency communications via wireless links. To avoid the loss of packets and keep the low latency, sliding network coding (SNC) is an emerging technology by generating redundant packets that are the linear combination of the original data packets from the current block and some previous blocks. However, how to take the advantage of re-transmission for SNC is still an open problem since higher reliability could be achieved at the expense of large latency caused by round-trip time (RTT). To deal with this issue, in this paper, we …
An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use \emph{interface diversity} and integrate multiple communication interfaces, each interface based on a different technology. Our approach is to use coding to seamlessly distribute coded payload and redundancy data across multiple available communication interfaces. We formulate an optimization problem to find the payload allocation weights that maximize the reliability at specific target latency values. By…
Polar codes have been gaining a lot of interest due to it being the first coding scheme to provably achieve the symmetric capacity of a binary memoryless channel with an explicit construction. However, the main drawback of polar codes is the low throughput of its successive cancellation (SC) decoding. Simplified SC decoding algorithms of polar codes can be used to reduce the latency of the polar decode by faster processing of specific sub-codes in the polar code. By combining simplified SC with a list decoding technique, such as SC list (SCL) decoding, polar codes can cater to the two conflict…
Attaining reliable communications traditionally relies on a closed-loop methodology but inevitably incurs a good amount of networking latency thanks to complicated feedback mechanism and signaling storm. Such a closed-loop methodology thus shackles the current cellular network with a tradeoff between high reliability and low latency. To completely avoid the latency induced by closed-loop communication, this paper aims to study how to jointly employ open-loop communication and multi-cell association in a heterogeneous network (HetNet) so as to achieve ultra-reliable and low-latency communicatio…
In URLLC the performance of short message communications highly depends on the training sequence length due to the stringent latency and reliability requirements. In this paper, we study the performance of cooperative and non-cooperative transmissions under imperfect channel estimation and Rayleigh fading for URLLC. We assume a peak power constraint on pilot symbols in addition to the average power constraint which is used for comparison purposes. We obtain the optimal training length as a function of blocklength and power constraint factor to meet the URLLC requirements. Moreover, the simulat…
An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use interface diversity and integrate multiple communication interfaces, each interface based on a different technology. In this work, we propose to use coding to seamlessly distribute coded payload and redundancy data across multiple available communication interfaces. We formulate an optimization problem to find the payload allocation weights that maximize the reliability at specific target latency values. …
Exact queueing analysis of erasure networks with network coding in a finite buffer regime is an extremely hard problem due to the large number of states in the network. In such networks, packets are lost due to either link erasures or due to blocking due to full buffers. In this paper, a block-by-block random linear network coding scheme with feedback on the links is selected for reliability and more importantly guaranteed decoding of each block. We propose a novel method that iteratively estimates the performance parameters of the network and more importantly reduces the computational complex…
High-fidelity, real-time interactive applications are envisioned with the emergence of the Internet of Things (IoT) and tactile Internet by means of ultra-reliable low-latency communications (URLLC). Exploiting time diversity for fulfilling the URLLC requirements in an energy efficient manner is a challenging task due to the nontrivial interplay among packet size, retransmission rounds and delay, and transmit power. In this paper, we study the fundamental energy-latency tradeoff in URLLC systems employing incremental redundancy (IR) hybrid automatic repeat request (HARQ). We cast the average e…
One of the ways to satisfy the requirements of ultra-reliable low latency communication for mission critical Machine-type Communications (MTC) applications is to integrate multiple communication interfaces. In order to estimate the performance in terms of latency and reliability of such an integrated communication system, we propose an analysis framework that combines traditional reliability models with technology-specific latency probability distributions. In our proposed model we demonstrate how failure correlation between technologies can be taken into account. We show for the considered sc…
This paper proposes interference mitigation techniques for provisioning ultrareliable low-latency wireless communication in an industrial automation setting, where multiple transmissions from controllers to actuators interfere with each other. Channel fading and interference are key impairments in wireless communication. This paper leverages the recently proposed ``Occupy CoW'' protocol that efficiently exploits the broadcast opportunity and spatial diversity through a two-hop cooperative communication strategy among distributed receivers to combat deep fading, but points out that because this…
In this letter, we analyze the achievable rate of ultra-reliable low-latency communications (URLLC) in a randomly modeled wireless network. We use two mathematical tools to properly characterize the considered system: i) stochastic geometry to model spatial locations of the transmitters in a network, and ii) finite block-length analysis to reflect the features of the short-packets. Exploiting these tools, we derive an integral-form expression of the decoding error probability as a function of the target rate, the path-loss exponent, the communication range, the density, and the channel coding …
This work analyzes the latency of the simplified successive cancellation (SSC) decoding scheme for polar codes proposed by Alamdar-Yazdi and Kschischang. It is shown that, unlike conventional successive cancellation decoding, where latency is linear in the block length, the latency of SSC decoding is sublinear. More specifically, the latency of SSC decoding is $O(N^{1-1/μ})$, where $N$ is the block length and $μ$ is the scaling exponent of the channel, which captures the speed of convergence of the rate to capacity. Numerical results demonstrate the tightness of the bound and show that most of…
Ultra reliable and low latency communications (URLLC) is a new service category in 5G to accommodate emerging services and applications having stringent latency and reliability requirements. In order to support URLLC, there should be both evolutionary and revolutionary changes in the air interface named 5G new radio (NR). In this article, we provide an up-to-date overview of URLLC with an emphasis on the physical layer challenges and solutions in 5G NR downlink. We highlight key requirements of URLLC and then elaborate the physical layer issues and enabling technologies including packet and fr…
Although blockchain, the supporting technology of Bitcoin and various cryptocurrencies, has offered a potentially effective framework for numerous applications, it still suffers from the adverse affects of the impossibility triangle. Performance, security, and decentralization of blockchains normally do not scale simultaneously with the number of participants in the network. The recent introduction of error correcting codes in sharded blockchain by Li et al. partially settles this trilemma, boosting throughput without compromising security and decentralization. In this paper, we improve the co…
With the rapid development of communications and computing, the concept of connected vehicles emerges to improve driving safety, traffic efficiency and infotainment experience. Due to the limited capabilities of sensors and information processing on a single vehicle, vehicular networks (VNETs) play a vital role for the realization of connected vehicles. To achieve the closer cooperation on the road, ultra-reliable and low-latency communications (URLLCs) become the indispensable components of future VNETs. However, traditional wireless networks are designed with the objective of maximizing spec…
To efficiently support safety-related vehicular applications, the ultra-reliable and low-latency communication (URLLC) concept has become an indispensable component of vehicular networks (VNETs). Due to the high mobility of VNETs, exchanging near-instantaneous channel state information (CSI) and making reliable resource allocation decisions based on such short-term CSI evaluations are not practical. In this paper, we consider the downlink of a vehicle-to-infrastructure (V2I) system conceived for URLLC based on idealized perfect and realistic imperfect CSI. By exploiting the benefits of the mas…
Virtual Reality (VR) is expected to be one of the killer-applications in 5G networks. However, many technical bottlenecks and challenges need to be overcome to facilitate its wide adoption. In particular, VR requirements in terms of high-throughput, low-latency and reliable communication call for innovative solutions and fundamental research cutting across several disciplines. In view of this, this article discusses the challenges and enablers for ultra-reliable and low-latency VR. Furthermore, in an interactive VR gaming arcade case study, we show that a smart network design that leverages th…
Channel state information (CSI) has been a key component in traditional wireless communication systems. This might no longer hold in future networks supporting services with stringent quality of service constraints such as extremely low-latency, low-energy and/or large number of simultaneously connected devices, where acquiring CSI would become extremely costly or even impractical. We overview the main limitations of CSI at transmitter side (CSIT)-based designs toward the 6G era, assess how to design and use efficient CSIT-limited schemes that allow meeting the new and stringent requirements, …
Effective Capacity defines the maximum communication rate subject to a specific delay constraint, while effective energy efficiency (EEE) indicates the ratio between effective capacity and power consumption. We analyze the EEE of ultra-reliable networks operating in the finite blocklength regime. We obtain a closed form approximation for the EEE in quasi-static Nakagami-$m$ (and Rayleigh as sub-case) fading channels as a function of power, error probability, and latency. Furthermore, we characterize the QoS constrained EEE maximization problem for different power consumption models, which show…
Ultra-reliable and low-latency communications (URLLC) is expected to be supported without compromising the resource usage efficiency. In this paper, we study how to maximize energy efficiency (EE) for URLLC under the stringent quality of service (QoS) requirement imposed on the end-to-end (E2E) delay and overall packet loss, where the E2E delay includes queueing delay and transmission delay, and the overall packet loss consists of queueing delay violation, transmission error with finite blocklength channel codes, and proactive packet dropping in deep fading. Transmit power, bandwidth and numbe…
High reliability guarantees for Ultra-Reliable Low-Latency Communications (URLLC) require accurate knowledge of channel statistics, used as an input for rate selection. Exploiting the spatial consistency of channel statistics arises as a promising solution, allowing a base station to predict the propagation conditions and select the communication parameters for a new user from samples collected from previous users of the network. Based on this idea, this article provides a timely framework to exploit long-range channel spatial correlation through so-called statistical radio maps, enabling URLL…
The future connectivity landscape and, notably, the 5G wireless systems will feature Ultra-Reliable Low Latency Communication (URLLC). The coupling of high reliability and low latency requirements in URLLC use cases makes the wireless access design very challenging, in terms of both the protocol design and of the associated transmission techniques. This paper aims to provide a broad perspective on the fundamental tradeoffs in URLLC as well as the principles used in building access protocols. Two specific technologies are considered in the context of URLLC: massive MIMO and multi-connectivity, …
Ultra-reliable and low-latency communications (URLLC) have stringent requirements on quality-of-service and network availability. Due to path loss and shadowing, it is very challenging to guarantee the stringent requirements of URLLC with satisfactory communication range. In this paper, we first provide a quantitative definition of network availability in the short blocklength regime: the probability that the reliability and latency requirements can be satisfied when the blocklength of channel codes is short. Then, we establish a framework to maximize available range, defined as the maximal co…
Ultra-reliable and low-latency communication (URLLC) is one category of service to be provided by next-generation wireless networks. Motivated by increasing security concerns in such networks, this article focuses on physical layer security (PLS) in the context of URLLC. The PLS technique mainly uses transmission designs based on the intrinsic randomness of the wireless medium to achieve secrecy. As such, PLS is of lower complexity and incurs less latency than traditional cryptography. In this article, we first introduce appropriate performance metrics for evaluating PLS in URLLC, illustrating…
Ensuring ultra-reliable and low-latency communication (URLLC) for 5G wireless networks and beyond is of capital importance and is currently receiving tremendous attention in academia and industry. At its core, URLLC mandates a departure from expected utility-based network design approaches, in which relying on average quantities (e.g., average throughput, average delay and average response time) is no longer an option but a necessity. Instead, a principled and scalable framework which takes into account delay, reliability, packet size, network architecture, and topology (across access, edge, a…
Ultra-reliability and low-latency are pivotal requirements of the new 6th generation of communication systems (xURLLC). Over the past years, to increase throughput, adaptive active antennas were introduced in advanced wireless communications, specifically in the domain of millimeter-wave (mmWave). Consequently, new lower-layer techniques were proposed to cope with practical challenges of high dimensional and electronically-steerable beams. The transition from omni-directional to highly directional antennas presents a new type of wireless systems that deliver high bandwidth, but that are suscep…
In this paper, we propose a framework for cross-layer optimization to ensure ultra-high reliability and ultra-low latency in radio access networks, where both transmission delay and queueing delay are considered. With short transmission time, the blocklength of channel codes is finite, and the Shannon Capacity cannot be used to characterize the maximal achievable rate with given transmission error probability. With randomly arrived packets, some packets may violate the queueing delay. Moreover, since the queueing delay is shorter than the channel coherence time in typical scenarios, the requir…
We consider the problem of post-quantum secure and ultra-reliable communication through a heterogeneous network consisting of multiple connections. Three performance metrics are considered: security, throughput, and in-order delivery delay. In this setting, previous work has looked, individually, at the trade-offs between in-order delivery delay and throughput, and between security and throughput. This is the first work considering the trade-off between all three for heterogeneous communication networks, while taking the computational complexity into account. We present LL-HUNCC, a low latency…
Mission-critical applications require Ultra-Reliable Low Latency (URLLC) wireless connections, where the packet error rate (PER) goes down to $10^{-9}$. Fulfillment of the bold reliability figures becomes meaningful only if it can be related to a statistical model in which the URLLC system operates. However, this model is generally not known and needs to be learned by sampling the wireless environment. In this paper we treat this fundamental problem in the simplest possible communication-theoretic setting: selecting a transmission rate over a dynamic wireless channel in order to guarantee high…
School of Electronics and Information Technology, Sun Yat-sen University（中山大学电子与信息工程学院）；Guangdong Province Key Laboratory of Information Security Technology（广东省信息安全技术重点实验室）；Hangzhou Research Center, Huawei Technologies Co., Ltd.（华为技术有限公司杭州研究中心）
Interactive, immersive and critical applications demand ultra-reliable low-latency communication (URLLC). To build wireless communication systems that can support these applications, understanding the characteristics of the wireless medium is paramount. Although wireless channel characteristics and dynamics have been extensively studied, it is important to revisit these concepts in the context of the strict demands of low latency and ultra-reliability. In this paper, we bring a modeling approach from robust control to wireless communication -- the wireless channel characteristics are given a n…
Supporting ultra-reliable and low-latency communications (URLLC) is one of the major goals for the fifth-generation cellular networks. Since spectrum usage efficiency is always a concern, and large bandwidth is required for ensuring stringent quality-of-service (QoS), we minimize the total bandwidth under the QoS constraints of URLLC. We first propose a packet delivery mechanism for URLLC. To reduce the required bandwidth for ensuring queueing delay, we consider a statistical multiplexing queueing mode, where the packets to be sent to different devices are waiting in one queue at the base stat…
Ultra-reliable low latency communication (URLLC) is an important new feature brought by 5G, with a potential to support a vast set of applications that rely on mission-critical links. In this article, we first discuss the principles for supporting URLLC from the perspective of the traditional assumptions and models applied in communication/information theory. We then discuss how these principles are applied in various elements of the system design, such as use of various diversity sources, design of packets and access protocols. The important messages are that there is a need to optimize the t…
Ultra reliable and low latency communication (URLLC) is a newly introduced service category in 5G to support delay-sensitive applications. In order to support this new service category, 3rd Generation Partnership Project (3GPP) sets an aggressive requirement that a packet should be delivered with 10^-5 packet error rate within 1 ms transmission period. Since the current wireless transmission scheme designed to maximize the coding gain by transmitting capacity achieving long codeblock is not relevant for this purpose, a new transmission scheme to support URLLC is required. In this paper, we pro…
Emerging wireless control applications demand for extremely high closed-loop reliability under strict latency constraints, which the conventional Automatic Repeat reQuest (ARQ) solutions with static schedules fail to provide. To overcome this issue and enable data-link layer error control for ultra reliable low-latency communication (URLLC) services, we propose a novel protocol: the Closed-Loop ARQ (CLARQ), which forces to accomplish an information exchange round within a fixed loop-back latency, and dynamically re-allocates the remaining resource between uplink and downlink slots upon the res…
Ultra reliable, low latency vehicle-to-infrastructure (V2I) communications is a key requirement for seamless operation of autonomous vehicles (AVs) in future smart cities. To this end, cellular small base stations (SBSs) with edge computing capabilities can reduce the end-to-end (E2E) service delay by processing requested tasks from AVs locally, without forwarding the tasks to a remote cloud server. Nonetheless, due to the limited computational capabilities of the SBSs, coupled with the scarcity of the wireless bandwidth resources, minimizing the E2E latency for AVs and achieving a reliable V2…
An important novelty of 5G is its role in transforming the industrial production into Industry 4.0. Specifically, Ultra-Reliable Low Latency Communications (URLLC) will, in many cases, enable replacement of cables with wireless connections and bring freedom in designing and operating interconnected machines, robots, and devices. However, not all industrial links will be of URLLC type; e.g. some applications will require high data rates. Furthermore, these industrial networks will be highly heterogeneous, featuring various communication technologies. We consider network slicing as a mechanism t…
We consider practical hardware implementation of Polar decoders. To reduce latency due to the serial nature of successive cancellation (SC), existing optimizations improve parallelism with two approaches, i.e., multi-bit decision or reduced path splitting. In this paper, we combine the two procedures into one with an error-pattern-based architecture. It simultaneously generates a set of candidate paths for multiple bits with pre-stored patterns. For rate-1 (R1) or single parity-check (SPC) nodes, we prove that a small number of deterministic patterns are required to guarantee performance prese…
Ultra-reliable low-latency communications (URLLC) has been considered as one of the three new application scenarios in the \emph{5th Generation} (5G) \emph {New Radio} (NR), where the physical layer design aspects have been specified. With the 5G NR, we can guarantee the reliability and latency in radio access networks. However, for communication scenarios where the transmission involves both radio access and wide area core networks, the delay in radio access networks only contributes to part of the \emph{end-to-end} (E2E) delay. In this paper, we outline the delay components and packet loss p…
Spatially coupled serially concatenated codes (SC-SCCs) are a class of spatially coupled turbo-like codes, which have a close-to-capacity performance and low error floor. In this paper we investigate the impact of coupling memory, block length, decoding window size, and number of iterations on the performance, complexity, and latency of SC-SCCs. Several design tradeoffs are presented to see the relation between these parameters in a wide range. Also, our analysis provides design guidelines for SC-SCCs in different scenarios to make the code design independent of block length. As a result, bloc…
The strict latency and reliability requirements of ultra-reliable low-latency communications (URLLC) use cases are among the main drivers in fifth generation (5G) network design. Link adaptation (LA) is considered to be one of the bottlenecks to realize URLLC. In this paper, we focus on predicting the signal to interference plus noise ratio at the user to enhance the LA. Motivated by the fact that most of the URLLC use cases with most extreme latency and reliability requirements are characterized by semi-deterministic traffic, we propose to exploit the time correlation of the interference to c…
This work considers the multihop multiple-input multiple-output relay network under short-packet communications to facilitate not only ultra-reliability but also low-latency communications. We assume that the transmit antenna selection (TAS) scheme is utilized at the transmit side, whereas either selection combining (SC) or maximum ratio combining (MRC) is leveraged at the receive side to achieve diversity gains. For quasi-static Rayleigh fading channels and the finite-blocklength regime, we derive the approximate closed-form expressions of the end-to-end (e2e) block error rate (BLER) for both…
The rapid development of the fifth generation mobile communication systems accelerates the implementation of vehicle-to-everything communications. Compared with the other types of vehicular communications, vehicle-to-vehicle (V2V) communications mainly focus on the exchange of driving safety information with neighboring vehicles, which requires ultra-reliable and low-latency communications (URLLCs). However, the frame size is significantly shortened in V2V URLLCs because of the rigorous latency requirements, and thus the overhead is no longer negligible compared with the payload information fr…
The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user-specific latency requirements in a dynamic mobile access network. We use the Lyapunov optimization framework, and provide a dynamic control algorithm, which efficiently transforms a time-average stoc…
Line-of-sight link blockages represent a key challenge for the reliability and latency of millimeter wave (mmWave) and terahertz (THz) communication networks. This paper proposes to leverage LiDAR sensory data to provide awareness about the communication environment and proactively predict dynamic link blockages before they happen. This allows the network to make proactive decisions for hand-off/beam switching which enhances its reliability and latency. We formulate the LiDAR-aided blockage prediction problem and present the first real-world demonstration for LiDAR-aided blockage prediction in…
