The fifth-generation cellular mobile networks are expected to support mission critical ultra-reliable low latency communication (URLLC) services in addition to the enhanced mobile broadband applications. This article first introduces three emerging mission critical applications of URLLC and identifies their requirements on end-to-end latency and reliability. We then investigate the various sources of end-to-end delay of current wireless networks by taking the 4G Long Term Evolution (LTE) as an example. Subsequently, we propose and evaluate several techniques to reduce the end-to-end latency from the perspectives of error control coding, signal processing, and radio resource management. We also briefly discuss other network design approaches with the potential for further latency reduction.
Immersive social interactions of mobile users are soon to be enabled within a virtual space, by means of virtual reality (VR) technologies and wireless cellular systems. In a VR mobile social network, the states of all interacting users should be updated synchronously and with low latency via two-way communications with edge computing servers. The resulting end-to-end latency depends on the relationship between the virtual and physical locations of the wireless VR users and of the edge servers. In this work, the problem of analyzing and optimizing the end-to-end latency is investigated for a s…
In this paper, a novel concept of three-dimensional (3D) cellular networks, that integrate drone base stations (drone-BS) and cellular-connected drone users (drone-UEs), is introduced. For this new 3D cellular architecture, a novel framework for network planning for drone-BSs as well as latency-minimal cell association for drone-UEs is proposed. For network planning, a tractable method for drone-BSs' deployment based on the notion of truncated octahedron shapes is proposed that ensures full coverage for a given space with minimum number of drone-BSs. In addition, to characterize frequency plan…
Ultra-reliable and low-latency communications (URLLC) have stringent requirements on quality-of-service and network availability. Due to path loss and shadowing, it is very challenging to guarantee the stringent requirements of URLLC with satisfactory communication range. In this paper, we first provide a quantitative definition of network availability in the short blocklength regime: the probability that the reliability and latency requirements can be satisfied when the blocklength of channel codes is short. Then, we establish a framework to maximize available range, defined as the maximal co…
Developing low-power wide-area network (LPWAN) solutions that are efficient to adopt, deploy and maintain are vital for smart cities. The poor quality-of-service of unlicensed LPWAN, and the high service cost of LTE-M/NB-IoT are key disadvantages of these technologies. Concatenating unlicensed with licensed LPWANs can overcome these limitations and harness their benefits. However, a concatenated LPWAN architecture will inevitably result in excess latency which may impact users' quality-of-experience (QoE). To evaluate the real-life feasibility of this system, we first propose a concatenated LP…
Most prior work on performance analysis of ultra-dense cellular networks (UDNs) has considered standard power-law path loss models and non-line-of-sight (NLOS) propagation modeled by Rayleigh fading. The effect of line-of-sight (LOS) on coverage and throughput and its implication on network densification are still not fully understood. In this paper, we investigate the performance of UDNs when the signal propagation includes both LOS and NLOS components. Using a stochastic geometry based cellular network model, we derive expressions for the coverage probability, as well as tight approximations…
The deployment of federated learning in a wireless network, called federated edge learning (FEEL), exploits low-latency access to distributed mobile data to efficiently train an AI model while preserving data privacy. In this work, we study the spatial (i.e., spatially averaged) learning performance of FEEL deployed in a large-scale cellular network with spatially random distributed devices. Both the schemes of digital and analog transmission are considered, providing support of error-free uploading and over-the-air aggregation of local model updates by devices. The derived spatial convergence…
Ultra-reliability and low-latency are two key components in 5G networks. In this letter, we investigate the problem of ultra-reliable and low-latency communication (URLLC) in millimeter wave (mmWave)-enabled massive multiple-input multiple-output (MIMO) networks. The problem is cast as a network utility maximization subject to probabilistic latency and reliability constraints. To solve this problem, we resort to the Lyapunov technique whereby a utility-delay control approach is proposed, which adapts to channel variations and queue dynamics. Numerical results demonstrate that our proposed appr…
The rapid development of the fifth generation mobile communication systems accelerates the implementation of vehicle-to-everything communications. Compared with the other types of vehicular communications, vehicle-to-vehicle (V2V) communications mainly focus on the exchange of driving safety information with neighboring vehicles, which requires ultra-reliable and low-latency communications (URLLCs). However, the frame size is significantly shortened in V2V URLLCs because of the rigorous latency requirements, and thus the overhead is no longer negligible compared with the payload information fr…
With the phenomenal growth of the Internet of Things (IoT), Ultra Reliable Low Latency Communications (URLLC) has potentially been the enabler to guarantee the stringent requirements on latency and reliability. However, how to achieve low latency and ultra-reliability with the random arrival remains open. In this paper, a queue-aware variable-length channel coding is presented over the single URLLC user link, in which the finite blocklength of channel coding is determined based on the random arrival. More particularly, a cross-layer approach is proposed for the URLLC user to establish the opti…
We consider a dense urban cellular network where the base stations (BSs) are stacked vertically as well as extending infinitely in the horizontal plane, resulting in a greater than two dimensional (2D) deployment. Using a dual-slope path loss model that is well supported empirically, we extend recent 2D coverage probability and potential throughput results to 3 dimensions. We prove that the "critical close-in path loss exponent" $α_0$ where SINR eventually decays to zero is equal to the dimensionality $d$, i.e. $α_0 \leq 3$ results in an eventual SINR of 0 in a 3D network. We also show that th…
This paper proposes a cellular network exploiting millimeter-wave (mmWave) and ultra-densified base stations (BSs) to achieve the far-reaching 5G aim in downlink average rate. The mmWave overlaid network however incurs a pitfall that its ample data rate is only applicable for downlink transmissions due to the implementation difficulty at mobile users, leading to an immense difference between uplink and downlink rates. We therefore turn our attention not only to maximize downlink rate but also to ensure the minimum uplink rate. With this end, we firstly derive the mmWave overlaid ultra-dense ce…
In this paper, the problem of cell association between small base stations (SBSs) and users in dense wireless networks is studied using artificial intelligence (AI) techniques. The problem is formulated as a mean-field game in which the users' goal is to maximize their data rate by exploiting local data and the data available at neighboring users via an imitation process. Such a collaborative learning process prevents the users from exchanging their data directly via the cellular network's limited backhaul links and, thus, allows them to improve their cell association policy collaboratively wi…
An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use \emph{interface diversity} and integrate multiple communication interfaces, each interface based on a different technology. Our approach is to use coding to seamlessly distribute coded payload and redundancy data across multiple available communication interfaces. We formulate an optimization problem to find the payload allocation weights that maximize the reliability at specific target latency values. By…
This paper studies the asymptotic properties of average area spectral efficiency (ASE) of a downlink cellular network in the limit of very dense base station (BS) and user densities. This asymptotic analysis relies on three assumptions: (1) interference is treated as noise; (2) the BS locations are drawn from a Poisson point process; (3) the path loss function is bounded above satisfying mild regularity conditions. We consider three possible definitions of the average ASE, all of which give units of bits per second per unit bandwidth per unit area. When there is no constraint on the minimum op…
In this paper, we propose a learning-based low-overhead channel estimation method for coordinated beamforming in ultra-dense networks. We first show through simulation that the channel state information (CSI) of geographically separated base stations (BSs) exhibits strong non-linear correlations in terms of mutual information. This finding enables us to adopt a novel learning-based approach to remotely infer the quality of different beamforming patterns at a dense-layer BS based on the CSI of an umbrella control-layer BS. The proposed scheme can reduce channel acquisition overhead by replacing…
Attaining reliable communications traditionally relies on a closed-loop methodology but inevitably incurs a good amount of networking latency thanks to complicated feedback mechanism and signaling storm. Such a closed-loop methodology thus shackles the current cellular network with a tradeoff between high reliability and low latency. To completely avoid the latency induced by closed-loop communication, this paper aims to study how to jointly employ open-loop communication and multi-cell association in a heterogeneous network (HetNet) so as to achieve ultra-reliable and low-latency communicatio…
Caching of popular contents at cellular base stations, i.e., edge caching, in order to eliminate duplicate transmission through the backhaul can reduce the latency of data delivery in $5$G networks. However, since caching can only reduce the backhaul delay, techniques such as base station densification will also need to be used to reduce the fronthaul delay. In this paper, using results from stochastic geometry, we first model the effects of base station densification and cache size on the latency of the system. We then derive a tight approximation for the cache hit probability. To optimize th…
In URLLC the performance of short message communications highly depends on the training sequence length due to the stringent latency and reliability requirements. In this paper, we study the performance of cooperative and non-cooperative transmissions under imperfect channel estimation and Rayleigh fading for URLLC. We assume a peak power constraint on pilot symbols in addition to the average power constraint which is used for comparison purposes. We obtain the optimal training length as a function of blocklength and power constraint factor to meet the URLLC requirements. Moreover, the simulat…
Future autonomous systems require wireless connectivity able to support extremely stringent requirements on both latency and reliability. In this paper, we leverage recent developments in the field of finite-blocklength information theory to illustrate how to optimally design wireless systems in the presence of such stringent constraints. Focusing on a multi-antenna Rayleigh block-fading channel, we obtain bounds on the maximum number of bits that can be transmitted within given bandwidth, latency, and reliability constraints, using an orthogonal frequency-division multiplexing system similar …
An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use interface diversity and integrate multiple communication interfaces, each interface based on a different technology. In this work, we propose to use coding to seamlessly distribute coded payload and redundancy data across multiple available communication interfaces. We formulate an optimization problem to find the payload allocation weights that maximize the reliability at specific target latency values. …
What does millimeter-wave (mmW) seek assistance for from micro-wave (μW) in a mmW overlaid 5G cellular network? This paper raises the question of whether to complement downlink (DL) or uplink (UL) transmissions, and concludes that μW should aid UL more. Such dedication to UL results from the low mmW UL rate due to high peak-to-average power ratio (PAPR) at mobile users. The DL/UL allocations are tractably provided based on a novel closed-form mm-μW spectral efficiency (SE) derivation via stochastic geometry. The findings explicitly indicate: (i) both DL/UL mmW (or μW) SEs coincidentally conver…
This paper reviews the state of the art channel coding techniques for ultra-reliable low latency communication (URLLC). The stringent requirements of URLLC services, such as ultra-high reliability and low latency, have made it the most challenging feature of the fifth generation (5G) mobile systems. The problem is even more challenging for the services beyond the 5G promise, such as tele-surgery and factory automation, which require latencies less than 1ms and failure rate as low as $10^{-9}$. The very low latency requirements of URLLC do not allow traditional approaches such as re-transmissio…
Enabling high-rate, low-latency and ultra-reliable wireless communications between unmanned aerial vehicles (UAVs) and their associated ground pilots/users is of paramount importance to realize their large-scale usage in the future. To achieve this goal, cellular-connected UAV, whereby UAVs for various applications are integrated into the cellular network as new aerial users, is a promising technology that has drawn significant attention recently. Compared to the conventional cellular communication with terrestrial users, cellular-connected UAV communication possesses substantially different c…
High-fidelity, real-time interactive applications are envisioned with the emergence of the Internet of Things (IoT) and tactile Internet by means of ultra-reliable low-latency communications (URLLC). Exploiting time diversity for fulfilling the URLLC requirements in an energy efficient manner is a challenging task due to the nontrivial interplay among packet size, retransmission rounds and delay, and transmit power. In this paper, we study the fundamental energy-latency tradeoff in URLLC systems employing incremental redundancy (IR) hybrid automatic repeat request (HARQ). We cast the average e…
This article investigates the mobility management of an ultra dense cellular network (UDN) from an energy-efficiency (EE) point of view. Many dormant base stations (BSs) in a UDN do not transmit signals, and thus a received power based handover (HO) approach as in traditional cellular networks is hardly applicable. In addition, the limited front/backhaul capacity compared to a huge number of BSs makes it difficult to implement a centralized HO and power control. For these reasons, a novel user-centric association rule is proposed, which jointly optimizes HO and power control for maximizing EE.…
This paper proposes interference mitigation techniques for provisioning ultrareliable low-latency wireless communication in an industrial automation setting, where multiple transmissions from controllers to actuators interfere with each other. Channel fading and interference are key impairments in wireless communication. This paper leverages the recently proposed ``Occupy CoW'' protocol that efficiently exploits the broadcast opportunity and spatial diversity through a two-hop cooperative communication strategy among distributed receivers to combat deep fading, but points out that because this…
In this letter, we analyze the achievable rate of ultra-reliable low-latency communications (URLLC) in a randomly modeled wireless network. We use two mathematical tools to properly characterize the considered system: i) stochastic geometry to model spatial locations of the transmitters in a network, and ii) finite block-length analysis to reflect the features of the short-packets. Exploiting these tools, we derive an integral-form expression of the decoding error probability as a function of the target rate, the path-loss exponent, the communication range, the density, and the channel coding …
Ultra reliable and low latency communications (URLLC) is a new service category in 5G to accommodate emerging services and applications having stringent latency and reliability requirements. In order to support URLLC, there should be both evolutionary and revolutionary changes in the air interface named 5G new radio (NR). In this article, we provide an up-to-date overview of URLLC with an emphasis on the physical layer challenges and solutions in 5G NR downlink. We highlight key requirements of URLLC and then elaborate the physical layer issues and enabling technologies including packet and fr…
One of the ways to satisfy the requirements of ultra-reliable low latency communication for mission critical Machine-type Communications (MTC) applications is to integrate multiple communication interfaces. In order to estimate the performance in terms of latency and reliability of such an integrated communication system, we propose an analysis framework that combines traditional reliability models with technology-specific latency probability distributions. In our proposed model we demonstrate how failure correlation between technologies can be taken into account. We show for the considered sc…
With the rapid development of communications and computing, the concept of connected vehicles emerges to improve driving safety, traffic efficiency and infotainment experience. Due to the limited capabilities of sensors and information processing on a single vehicle, vehicular networks (VNETs) play a vital role for the realization of connected vehicles. To achieve the closer cooperation on the road, ultra-reliable and low-latency communications (URLLCs) become the indispensable components of future VNETs. However, traditional wireless networks are designed with the objective of maximizing spec…
To efficiently support safety-related vehicular applications, the ultra-reliable and low-latency communication (URLLC) concept has become an indispensable component of vehicular networks (VNETs). Due to the high mobility of VNETs, exchanging near-instantaneous channel state information (CSI) and making reliable resource allocation decisions based on such short-term CSI evaluations are not practical. In this paper, we consider the downlink of a vehicle-to-infrastructure (V2I) system conceived for URLLC based on idealized perfect and realistic imperfect CSI. By exploiting the benefits of the mas…
Channel state information (CSI) has been a key component in traditional wireless communication systems. This might no longer hold in future networks supporting services with stringent quality of service constraints such as extremely low-latency, low-energy and/or large number of simultaneously connected devices, where acquiring CSI would become extremely costly or even impractical. We overview the main limitations of CSI at transmitter side (CSIT)-based designs toward the 6G era, assess how to design and use efficient CSIT-limited schemes that allow meeting the new and stringent requirements, …
Effective Capacity defines the maximum communication rate subject to a specific delay constraint, while effective energy efficiency (EEE) indicates the ratio between effective capacity and power consumption. We analyze the EEE of ultra-reliable networks operating in the finite blocklength regime. We obtain a closed form approximation for the EEE in quasi-static Nakagami-$m$ (and Rayleigh as sub-case) fading channels as a function of power, error probability, and latency. Furthermore, we characterize the QoS constrained EEE maximization problem for different power consumption models, which show…
Cellular networks of massive MIMO base-stations employing TDD/OFDM and relying on uplink training for both downlink and uplink transmission are viewed as an attractive candidate for 5G deployments, as they promise high area spectral and energy efficiencies with relatively simple low-latency operation. We investigate the use of non-orthogonal uplink pilot designs as a means for improving the area spectral efficiency in the downlink of such massive MIMO cellular networks. We develop a class of pilot designs that are locally orthogonal within each cell, while maintaining low inner-product propert…
Ultra-reliable and low-latency communications (URLLC) is expected to be supported without compromising the resource usage efficiency. In this paper, we study how to maximize energy efficiency (EE) for URLLC under the stringent quality of service (QoS) requirement imposed on the end-to-end (E2E) delay and overall packet loss, where the E2E delay includes queueing delay and transmission delay, and the overall packet loss consists of queueing delay violation, transmission error with finite blocklength channel codes, and proactive packet dropping in deep fading. Transmit power, bandwidth and numbe…
The forthcoming 5G cellular network is expected to overlay millimeter-wave (mmW) transmissions with the incumbent micro-wave (μW) architecture. The overall mm-μW resource management should therefore harmonize with each other. This paper aims at maximizing the overall downlink (DL) rate with a minimum uplink (UL) rate constraint, and concludes: mmW tends to focus more on DL transmissions while μW has high priority for complementing UL, under time-division duplex (TDD) mmW operations. Such UL dedication of μW results from the limited use of mmW UL bandwidth due to excessive power consumption and…
High reliability guarantees for Ultra-Reliable Low-Latency Communications (URLLC) require accurate knowledge of channel statistics, used as an input for rate selection. Exploiting the spatial consistency of channel statistics arises as a promising solution, allowing a base station to predict the propagation conditions and select the communication parameters for a new user from samples collected from previous users of the network. Based on this idea, this article provides a timely framework to exploit long-range channel spatial correlation through so-called statistical radio maps, enabling URLL…
Virtual Reality (VR) is expected to be one of the killer-applications in 5G networks. However, many technical bottlenecks and challenges need to be overcome to facilitate its wide adoption. In particular, VR requirements in terms of high-throughput, low-latency and reliable communication call for innovative solutions and fundamental research cutting across several disciplines. In view of this, this article discusses the challenges and enablers for ultra-reliable and low-latency VR. Furthermore, in an interactive VR gaming arcade case study, we show that a smart network design that leverages th…
Imperial College London（帝国理工学院）；Sabanci University（萨班哲大学）
We study collaborative machine learning (ML) across wireless devices, each with its own local dataset. Offloading these datasets to a cloud or an edge server to implement powerful ML solutions is often not feasible due to latency, bandwidth and privacy constraints. Instead, we consider federated edge learning (FEEL), where the devices share local updates on the model parameters rather than their datasets. We consider a heterogeneous cellular network (HCN), where small cell base stations (SBSs) orchestrate FL among the mobile users (MUs) within their cells, and periodically exchange model updat…
The future connectivity landscape and, notably, the 5G wireless systems will feature Ultra-Reliable Low Latency Communication (URLLC). The coupling of high reliability and low latency requirements in URLLC use cases makes the wireless access design very challenging, in terms of both the protocol design and of the associated transmission techniques. This paper aims to provide a broad perspective on the fundamental tradeoffs in URLLC as well as the principles used in building access protocols. Two specific technologies are considered in the context of URLLC: massive MIMO and multi-connectivity, …
Ultra-reliable and low-latency communication (URLLC) is one category of service to be provided by next-generation wireless networks. Motivated by increasing security concerns in such networks, this article focuses on physical layer security (PLS) in the context of URLLC. The PLS technique mainly uses transmission designs based on the intrinsic randomness of the wireless medium to achieve secrecy. As such, PLS is of lower complexity and incurs less latency than traditional cryptography. In this article, we first introduce appropriate performance metrics for evaluating PLS in URLLC, illustrating…
In this paper, we propose a framework for cross-layer optimization to ensure ultra-high reliability and ultra-low latency in radio access networks, where both transmission delay and queueing delay are considered. With short transmission time, the blocklength of channel codes is finite, and the Shannon Capacity cannot be used to characterize the maximal achievable rate with given transmission error probability. With randomly arrived packets, some packets may violate the queueing delay. Moreover, since the queueing delay is shorter than the channel coherence time in typical scenarios, the requir…
Ensuring ultra-reliable and low-latency communication (URLLC) for 5G wireless networks and beyond is of capital importance and is currently receiving tremendous attention in academia and industry. At its core, URLLC mandates a departure from expected utility-based network design approaches, in which relying on average quantities (e.g., average throughput, average delay and average response time) is no longer an option but a necessity. Instead, a principled and scalable framework which takes into account delay, reliability, packet size, network architecture, and topology (across access, edge, a…
Low-rate and short-packet transmissions are important for ultra-reliable low-latency communications (URLLC). In this paper, we put forth a new family of sparse superposition codes for URLLC, called block orthogonal sparse superposition (BOSS) codes. We first present a code construction method for the efficient encoding of BOSS codes. The key idea is to construct codewords by the superposition of the orthogonal columns of a dictionary matrix with a sequential bit mapping strategy. We also propose an approximate maximum a posteriori probability (MAP) decoder with two stages. The approximate MAP …
We consider the problem of post-quantum secure and ultra-reliable communication through a heterogeneous network consisting of multiple connections. Three performance metrics are considered: security, throughput, and in-order delivery delay. In this setting, previous work has looked, individually, at the trade-offs between in-order delivery delay and throughput, and between security and throughput. This is the first work considering the trade-off between all three for heterogeneous communication networks, while taking the computational complexity into account. We present LL-HUNCC, a low latency…
Ultra-reliability and low-latency are pivotal requirements of the new 6th generation of communication systems (xURLLC). Over the past years, to increase throughput, adaptive active antennas were introduced in advanced wireless communications, specifically in the domain of millimeter-wave (mmWave). Consequently, new lower-layer techniques were proposed to cope with practical challenges of high dimensional and electronically-steerable beams. The transition from omni-directional to highly directional antennas presents a new type of wireless systems that deliver high bandwidth, but that are suscep…
Driven by new types of wireless devices and the proliferation of bandwidth-intensive applications, data traffic and the corresponding network load are increasing dramatically. Network densification has been recognized as a promising and efficient way to provide higher network capacity and enhanced coverage. Most prior work on performance analysis of ultra-dense networks (UDNs) has focused on random spatial deployment with idealized singular path loss models and Rayleigh fading. In this paper, we consider a more precise and general model, which incorporates multi-slope path loss and general fad…
This paper investigates the relationship between base station (BS) density and average spectral efficiency (SE) in the downlink of a cellular network. This relationship has been well known for sparse deployment, i.e. when the number of BSs is small compared to the number of users. In this case the SE is independent of BS density. As BS density grows, on the other hand, it has previously been shown that increasing the BS density increases the SE, but no tractable form for the SE-BS density relationship has yet been derived. In this paper we derive such a closed-form result that reveals the SE i…
This article investigates the performance of an ultra-dense network (UDN) from an energy-efficiency (EE) standpoint leveraging the interplay between stochastic geometry (SG) and mean-field game (MFG) theory. In this setting, base stations (BSs) (resp. users) are uniformly distributed over a two-dimensional plane as two independent homogeneous Poisson point processes (PPPs), where users associate to their nearest BSs. The goal of every BS is to maximize its own energy efficiency subject to channel uncertainty, random BS location, and interference levels. Due to the coupling in interference, the…
Ultra reliable, low latency vehicle-to-infrastructure (V2I) communications is a key requirement for seamless operation of autonomous vehicles (AVs) in future smart cities. To this end, cellular small base stations (SBSs) with edge computing capabilities can reduce the end-to-end (E2E) service delay by processing requested tasks from AVs locally, without forwarding the tasks to a remote cloud server. Nonetheless, due to the limited computational capabilities of the SBSs, coupled with the scarcity of the wireless bandwidth resources, minimizing the E2E latency for AVs and achieving a reliable V2…
Ultra-reliable low latency communication (URLLC) is an important new feature brought by 5G, with a potential to support a vast set of applications that rely on mission-critical links. In this article, we first discuss the principles for supporting URLLC from the perspective of the traditional assumptions and models applied in communication/information theory. We then discuss how these principles are applied in various elements of the system design, such as use of various diversity sources, design of packets and access protocols. The important messages are that there is a need to optimize the t…
An important novelty of 5G is its role in transforming the industrial production into Industry 4.0. Specifically, Ultra-Reliable Low Latency Communications (URLLC) will, in many cases, enable replacement of cables with wireless connections and bring freedom in designing and operating interconnected machines, robots, and devices. However, not all industrial links will be of URLLC type; e.g. some applications will require high data rates. Furthermore, these industrial networks will be highly heterogeneous, featuring various communication technologies. We consider network slicing as a mechanism t…
We consider practical hardware implementation of Polar decoders. To reduce latency due to the serial nature of successive cancellation (SC), existing optimizations improve parallelism with two approaches, i.e., multi-bit decision or reduced path splitting. In this paper, we combine the two procedures into one with an error-pattern-based architecture. It simultaneously generates a set of candidate paths for multiple bits with pre-stored patterns. For rate-1 (R1) or single parity-check (SPC) nodes, we prove that a small number of deterministic patterns are required to guarantee performance prese…
Ultra-reliable low-latency communications (URLLC) has been considered as one of the three new application scenarios in the \emph{5th Generation} (5G) \emph {New Radio} (NR), where the physical layer design aspects have been specified. With the 5G NR, we can guarantee the reliability and latency in radio access networks. However, for communication scenarios where the transmission involves both radio access and wide area core networks, the delay in radio access networks only contributes to part of the \emph{end-to-end} (E2E) delay. In this paper, we outline the delay components and packet loss p…
The strict latency and reliability requirements of ultra-reliable low-latency communications (URLLC) use cases are among the main drivers in fifth generation (5G) network design. Link adaptation (LA) is considered to be one of the bottlenecks to realize URLLC. In this paper, we focus on predicting the signal to interference plus noise ratio at the user to enhance the LA. Motivated by the fact that most of the URLLC use cases with most extreme latency and reliability requirements are characterized by semi-deterministic traffic, we propose to exploit the time correlation of the interference to c…
This work considers the multihop multiple-input multiple-output relay network under short-packet communications to facilitate not only ultra-reliability but also low-latency communications. We assume that the transmit antenna selection (TAS) scheme is utilized at the transmit side, whereas either selection combining (SC) or maximum ratio combining (MRC) is leveraged at the receive side to achieve diversity gains. For quasi-static Rayleigh fading channels and the finite-blocklength regime, we derive the approximate closed-form expressions of the end-to-end (e2e) block error rate (BLER) for both…
A Fog Radio Access Network (F-RAN) is a cellular wireless system that enables content delivery via the caching of popular content at edge nodes (ENs) and cloud processing. The existing information-theoretic analyses of F-RAN systems, and special cases thereof, make the assumption that all requests should be guaranteed the same delivery latency, which results in identical latency for all files in the content library. In practice, however, contents may have heterogeneous timeliness requirements depending on the applications that operate on them. Given per-EN cache capacity constraint, there exis…
The fifth generation (5G) of cellular systems is introducing Ultra-Reliable Low-Latency Communications (URLLC) services alongside more conventional enhanced Mobile BroadBand (eMBB) traffic. Furthermore, the 5G cellular architecture is evolving from a base station-centric deployment to a fog-like set-up that accommodates a flexible functional split between cloud and edge. In this paper, a novel solution is proposed that enables the non-orthogonal coexistence of URLLC and eMBB services by processing URLLC traffic at the Edge Nodes (ENs), while eMBB communications are handled centrally at a cloud…
