Driven by mission-critical applications in modern industrial systems, the 5th generation (5G) communication system is expected to provide ultra-reliable low-latency communications (URLLC) services to meet the quality of service (QoS) demands of industrial applications. However, these stringent requirements cannot be guaranteed by its conventional dynamic access scheme due to the complex signaling procedure. A promising solution to reduce the access delay is the pre-allocation scheme based on the semi-persistent scheduling (SPS) technique, which however may lead to low spectrum utilization if the allocated resource blocks (RBs) are not used. In this paper, we aim to address this issue by developing DPre, a predictive pre-allocation framework for uplink access scheduling of delay-sensitive applications in industrial process automation. The basic idea of DPre is to explore and exploit the correlation of data acquisition and access behavior between nodes through static and dynamic learning mechanisms in order to make judicious resource per-allocation decisions. We evaluate the effectiveness of DPre based on several monitoring applications in a steel rolling production process. Simulation results demonstrate that DPre achieves better performance in terms of the prediction accuracy, which can effectively increase the rewards of those reserved resources.
Achieving an end-to-end low-latency for computations offloading, in Mobile Edge Computing (MEC) systems, is still a critical design problem. This is because the offloading of computational tasks via the MEC servers entails the use of uplink (UL) and downlink (DL) radio links that are usually assumed to be coupled to a single base station (BS). However, for heterogeneous networks, a new architectural paradigm whereby UL and DL are not associated with the same BS is proposed and seen to provide gains in network throughput due to the improved UL performance. Motivated by such gains, and by using …
5G vehicular communication is one of key enablers in next generation intelligent transportation system (ITS), that require ultra-reliable and low latency communication (URLLC). To meet this requirement, a new hybrid vehicular network structure which supports both centralized network structure and distributed structure is proposed in this paper. Based on the proposed network structure, a new vehicular network utility model considering the latency and reliability in vehicular networks is developed based on Euclidean norm theory. Building on the Pareto improvement theory in economics, a vehicular…
AP Association for RHS-Enabled Cell-Free Uplink MIMO in Industrial Indoor UAV Networks
Shanghai Jiao Tong University（上海交通大学）；Xi’an Jiaotong University（西安交通大学）；Jiangnan University（江南大学）；Beijing University of Posts and Telecommunications（北京邮电大学）
In many scenarios, low latency wireless communication assumes two-way connection, such that the node that receives information can swiftly send acknowledgment or other response. In this paper, we address the problem of low latency two-way communication and address it through proposal of a base station (BS) cooperation scheme. The scheme is based on downlink (DL) and uplink (UL) decoupled access (DUDA). To the best of our knowledge, this is the first time that the idea of decoupled access is used to reduce latency. We derive the analytical expression for the average latency and verify that the …
We propose a two dimension (2D) proactive uplink resource allocation (2D-PURA) algorithm that aims to reduce the delay/latency in event-based machine-type communications (MTC) applications. Specifically, when an event of interest occurs at a device, it tends to spread to the neighboring devices. Consequently, when a device has data to send to the base station (BS), its neighbors later are highly likely to transmit. Thus, we propose to cluster devices in the neighborhood around the event, also referred to as the disturbance region, into rings based on the distance from the original event. To re…
The newly introduced ultra-reliable low latency communication service class in 5G New Radio depends on innovative low latency radio resource management solutions that can guarantee high reliability. Grant-free random access, where channel resources are accessed without undergoing assignment through a handshake process, is proposed in 5G New Radio as an important latency reducing solution. However, this comes at an increased likelihood of collisions resulting from uncontrolled channel access, when the same resources are preallocated to a group of users. Novel reliability enhancement techniques …
While new mechanisms and configurations of the 5G radio are offering step forward in delivery of ultra-reliable low latency communication services in general, and haptic communications in particular, they could inversely impact the remainder of traffic services. In this paper, we investigate the uplink access procedure, how different advances in this procedure enhance delivery of haptic communication, and how it affects the remainder of traffic services in the network. We model this impact as the remainder of service, using stochastic network calculus. Our results show how best the tradeoff be…
Mobile cloud computing enables the offloading of computationally heavy applications, such as for gaming, object recognition or video processing, from mobile users (MUs) to cloudlet or cloud servers, which are connected to wireless access points, either directly or through finite-capacity backhaul links. In this paper, the design of a mobile cloud computing system is investigated by proposing the joint optimization of computing and communication resources with the aim of minimizing the energy required for offloading across all MUs under latency constraints at the application layer. The proposed…
With the fast growing number of wireless devices and demand of user data, the backhaul load becomes a bottleneck in wireless networks. Physical layer network coding (PNC) allows Access Points (APs) to relay compressed, network coded user data, therefore reducing the backhaul traffic. In this paper, an implementation of uplink Network Coded Modulation (NetCoM) with PNC is presented. A 5-node prototype NetCoM system is established using Universal Software Radio Peripherals (USRPs) and a practical PNC scheme designed for binary systems is utilised. An orthogonal frequency division multiplexing (O…
Fronthaul limitations in terms of capacity and latency motivate the growing interest in the wireless industry for the study of alternative functional splits between cloud and edge nodes in Cloud Radio Access Network (C-RAN). This work contributes to this line of work by investigating the optimal functional split of control and data plane functionalities at the edge nodes and at the Remote Cloud Center (RCC) as a function of the fronthaul latency. The model under study consists of a two-user time-varying uplink channel in which the RCC has global but delayed channel state information (CSI) due …
Sender anonymity in network communication is an important problem, widely addressed in the literature. Mixnets, combined with onion routing, represent certainly the most concrete and effective approach achieving the above goal. In general, the drawback of these approaches is that anonymity has a price in terms of traffic overhead and latency. On the Internet, to achieve scalability and not to require relevant infrastructure and network-protocol changes, only P2P overlay protocols can be adopted. Among these, the most representative proposal is certainly Tarzan, which is designed to obtain stro…
Modern manufacturers are currently undertaking the integration of novel digital technologies - such as 5G-based wireless networks, the Internet of Things (IoT), and cloud computing - to elevate their production process to a brand new level, the level of smart factories. In the setting of a modern smart factory, time-critical applications are increasingly important to facilitate efficient and safe production. However, these applications suffer from delays in data transmission and processing due to the high density of wireless sensors and the large volumes of data that they generate. As the adve…
Providing network reliability as well as low and predictable latency is important especially for Industrial Automation and Control Networks. However, diagnosing link status from the control plane has high latency and overhead. In addition, the communication with the industrial controller may impose additional network latency. We present FastReact - a system enabling In-Network monitoring, control and caching for Industrial Automation and Control Networks. FastReact outsources simple monitoring and control actions to evolving programmable data planes using the P4 language. As instructed by the …
The performance of orthogonal and non-orthogonal multiple access is studied for the multiplexing of enhanced Mobile BroadBand (eMBB) and Ultra-Reliable Low-Latency Communications (URLLC) users in the uplink of a multi-cell Cloud Radio Access Network (C-RAN) architecture. While eMBB users can operate over long codewords spread in time and frequency, URLLC users' transmissions are random and localized in time due to their low-latency requirements. These requirements also call for decoding of their packets to be carried out at the edge nodes (ENs), whereas eMBB traffic can leverage the interferen…
The implementation of uplink HARQ in a Cloud- Radio Access Network RAN (C-RAN) architecture is constrained by the two-way latency on the fronthaul links connecting the Remote Radio Heads (RRHs) with the Baseband Units (BBUs) that perform decoding. To overcome this limitation, this work considers an architecture based on the separation of control and data planes, in which retransmission control decisions are made at the edge of the network, that is, by the RRHs or User Equipments (UEs), while data decoding is carried out remotely at the BBUs. This solution enables low-latency local retransmissi…
This paper proposes and demonstrates a PHY-layer design of a real-time prototype that supports Ultra-Reliable Communication (URC) in wireless infrastructure networks. The design makes use of Orthogonal Frequency Division Multiple Access (OFDMA) as a means to achieve URC. Compared with Time-Division Multiple Access (TDMA), OFDMA concentrates the transmit power to a narrower bandwidth, resulting in higher effective SNR. Compared with Frequency-Division Multiple Access (FDMA), OFDMA has higher spectrum efficiency thanks to the smaller subcarrier spacing. Although OFDMA has been introduced in 802.…
The fifth generation (5G) new radio supports a diversity of network deployments. The industrial factory (InF) wireless automation use cases are emerging and drawing an increasing attention of the 5G new radio standardization groups. Therefore, in this paper, we propose a service-aware time division duplexing (TDD) frame selection framework for multi-traffic deployments. We evaluate the performance of the InF network deployments with the state-of-the-art 3GPP modeling assumptions. In particular, we consider the dynamic TDD mode along with optimized uplink power control settings. Multi-traffic c…
To date, model-based reliable communication with low latency is of paramount importance for time-critical wireless control systems. In this work, we study the downlink (DL) controller-to-actuator scheduling problem in a wireless industrial network such that the outage probability is minimized. In contrast to the existing literature based on well-known stationary fading channel models, we assume an arbitrary and unknown channel fading model, which is available only via samples. To overcome the issue of limited data samples, we invoke the generative adversarial network framework and propose an o…
Model-Free Control (MFC), which is easy to implement both from software and hardware viewpoints, permits the introduction of a high level control synthesis for the Industrial Internet of Things (IIoT) and the Industry 4.0. The choice of the User Diagram Protocol (UDP) as the Internet Protocol permits to neglect the latency. In spite of most severe packet losses, convincing computer simulations and laboratory experiments show that MFC exhibits a good Quality of Service (QoS) and behaves better than a classic PI regulator.
Communication for control-centric industrial applications is characterized by the requirements of very high reliability, very low and deterministic latency and high scalability. Typically, IEEE 802.11-based wireless local area networks (WLANs), also known as Wi-Fi networks, are deemed ineligible for industrial control applications owing to insufficient reliability and non-deterministic latency. This paper proposes a novel solution for providing reliable and deterministic communication, through Wi-Fi, in industrial environments. The proposed solution, termed as \textsf{HAR\(^\text{2}\)D-Fi} (\u…
Federated learning (FL) is an emerging machine learning technique that aggregates model attributes from a large number of distributed devices. Several unique features such as energy saving and privacy preserving make FL a highly promising learning approach for power-limited and privacy sensitive devices. Although distributed computing can lower down the information amount that needs to be uploaded, model updates in FL can still experience performance bottleneck, especially for updates via wireless connections. In this work, we investigate the performance of FL update with mobile edge devices t…
Unmanned aerial vehicles (UAV) are a promising technology for fast, large scale survey operations such as maritime search and rescue (SAR). However, providing reliable communications over long distances remains a challenge. Cellular technology such as Long Term Evolution (LTE) is designed to perform well in the presence of fast-moving clients and highly dynamic channel conditions. Yet, its generic medium access mechanisms make it hard to support low-latency uplink traffic, which is needed for real-time command and control and similar applications. In this paper, we introduce an unmanned aerial…
Singapore University of Technology and Design（新加坡科技设计大学）；Nanyang Technological University（南洋理工大学）；University of Oslo（奥斯陆大学）；Simula Metropolitan Center for Digital Engineering（西穆拉城市数字工程中心）
In this paper, we propose a transfer learning (TL)-enabled edge-CNN framework for 5G industrial edge networks with privacy-preserving characteristic. In particular, the edge server can use the existing image dataset to train the CNN in advance, which is further fine-tuned based on the limited datasets uploaded from the devices. With the aid of TL, the devices that are not participating in the training only need to fine-tune the trained edge-CNN model without training from scratch. Due to the energy budget of the devices and the limited communication bandwidth, a joint energy and latency proble…
Uplink configured Grant allocation has been introduced in 3rd Generation Partnership Project New Radio Release 15. This is beneficial in supporting Ultra-Reliable and Low Latency Communication for industrial communication, a key Fifth Generation mobile communication usage scenario. This scheduling mechanism enables a user with periodic traffic to transmits its data readily and bypasses the control signaling entailed to scheduling requests and scheduling grants and provides low latency access. To facilitate ultra-reliable communication, the scheduling mechanism can allow users to transmit conse…
Fog-aided network architectures for 5G systems encompass wireless edge nodes, referred to as remote radio systems (RRSs), as well as remote cloud center (RCC) processors, which are connected to the RRSs via a fronthaul access network. RRSs and RCC are operated via Network Functions Virtualization (NFV), enabling a flexible split of network functionalities that adapts to network parameters such as fronthaul latency and capacity. This work focuses on uplink communications and investigates the cloud-edge allocation of two important network functions, namely the control functionality of rate selec…
Chongqing University of Posts and Telecommunications（重庆邮电大学）；University of Guelph（圭尔夫大学）；Hubei University of Arts and Science（湖北文理学院）；Hosei University（法政大学）；RIKEN（理化学研究所）
Edge enabled Industrial Internet of Things (IIoT) platform is of great significance to accelerate the development of smart industry. However, with the dramatic increase in real-time IIoT applications, it is a great challenge to support fast response time, low latency, and efficient bandwidth utilization. To address this issue, Time Sensitive Network (TSN) is recently researched to realize low latency communication via deterministic scheduling. To the best of our knowledge, the combinability of multiple flows, which can significantly affect the scheduling performance, has never been systematica…
The classical definition of network delay has been recently augmented by the concept of information timeliness, or Age of Information (AoI). We analyze the network delay and the AoI in a multi-hop satellite network that relays status updates from satellite 1, receiving uplink traffic from ground devices, to satellite K, using K-2 intermediate satellite nodes. The last node, K, is the closest satellite with connectivity to a ground station. The satellite formation is modeled as a queue network of M/M/1 systems connected in series. The scenario is then generalized for the case in which all satel…
An important novelty of 5G is its role in transforming the industrial production into Industry 4.0. Specifically, Ultra-Reliable Low Latency Communications (URLLC) will, in many cases, enable replacement of cables with wireless connections and bring freedom in designing and operating interconnected machines, robots, and devices. However, not all industrial links will be of URLLC type; e.g. some applications will require high data rates. Furthermore, these industrial networks will be highly heterogeneous, featuring various communication technologies. We consider network slicing as a mechanism t…
An open-source implementation and validation of 5G NR Configured Grant for URLLC in ns-3 5G LENA: a scheduling case study in Industry 4.0 scenarios
Ikerlan Technology Research Centre（伊克兰兰技术研究中心）；Universidad Miguel Hernández de Elche (UMH)（埃尔切米格尔·埃尔南德斯大学）；Centre Tecnològic de Telecomunicacions de Catalunya (CTTC/CERCA)（加泰罗尼亚电信技术中心）
Centre for Wireless Communications, University of Oulu（奥卢大学无线通信中心）
While information delivery in industrial Internet of things demands reliability and latency guarantees, the freshness of the controller's available information, measured by the age of information (AoI), is paramount for high-performing industrial automation. The problem in this work is cast as a sensor's transmit power minimization subject to the peak-AoI requirement and a probabilistic constraint on queuing latency. We further characterize the tail behavior of the latency by a generalized Pareto distribution (GPD) for solving the power allocation problem through Lyapunov optimization. As each…
PASS-Enhanced MEC: Joint Optimization of Task Offloading and Uplink PASS Beamforming
College of Computer Science and Technology (College of Data Science)（计算机科学与技术学院（数据科学学院））；The Key Laboratory of Data Governance（数据治理关键实验室）；School of Information and Communication Engineering（信息与通信工程学院）；Centre for Wireless Innovation (CWI), Queen's University Belfast（无线创新中心（CWI），女王大学贝尔法斯特分校）；Department of Electrical and Electronic Engineering（电子与电气工程系）
Centre for Wireless Communications (CWC), University of Oulu（奥卢大学无线通信中心）
The current random access (RA) allocation techniques suffer from congestion and high signaling overhead while serving massive machine type communication (mMTC) applications. To this end, 3GPP introduced the need to use fast uplink grant (FUG) allocation in order to reduce latency and increase reliability for smart internet-of-things (IoT) applications with strict QoS constraints. We propose a novel FUG allocation based on support vector machine (SVM), First, MTC devices are prioritized using SVM classifier. Second, LSTM architecture is used for traffic prediction and correction techniques to o…
Future wireless cellular networks must support both enhanced mobile broadband (eMBB) and ultra reliable low latency communication (URLLC) to manage heterogeneous data traffic for emerging wireless services. To achieve this goal, a promising technique is to enable flexible frame structure by dynamically changing the data frame's numerology according to the channel information as well as traffic quality of service requirements. However, due to nonorthogonal subcarriers, this technique can result in an interference, known as inter numerology interference (INI), thus, degrading the network perform…
Some Machine-to-Machine (M2M) communication links particularly those in a industrial automation plant have stringent latency requirements. In this paper, we study the delay-performance for the M2M uplink from the sensors to a Programmable Logic Controller (PLC) in a industrial automation scenario. The uplink traffic can be broadly classified as either Periodic Update (PU) and Event Driven (ED). The PU arrivals from different sensors are periodic, synchronized by the PLC and need to be processed by a prespecified firm latency deadline. On the other hand, the ED arrivals are random, have low-arr…
Cyber Physical Systems (CPSs) are the result of convergence of computation, networking, and control of physical process. In this paper, we consider an industrial CPS consisting of several control plants and Rate Constrained (RC) users that communicate via a single cell OFDMA network. The problem of jointly determining the sampling instant of each control plant and allocating power and sub-carrier, in the CPS, is formulated. The problem is a multi objective optimization with aims of determining the next maximum allowable sampling instant of each control plant and minimizing the power consumptio…
We consider the problem of allocating 5G radio resources over wireless communication links to control a series of independent low-latency wireless control systems common in industrial settings. Each control system sends state information to the base station to compute control signals under tight latency requirements. Such latency requirements can be met by restricting the uplink traffic to a single subframe in each 5G frame, thus ensuring a millisecond latency bound while leaving the remaining subframes available for scheduling overhead and coexisting broadband traffic. A linear assignment pro…
