University Paris-Sud（巴黎第十一大学）；Conservatoire National des Arts et Métiers（法国国立工艺院）；Laboratoire de Mathématiques et de leurs Applications, CNRS, Université de Pau（波尔多大学数学及其应用实验室，法国国家科学研究中心）；Université de Pau（波尔多大学）
François Dubois, Isabelle Greff, Charles Pierre
备注：
arXiv admin note: text overlap with arXiv:1710.04395
发表信息：
Finite Volumes for Complex Applications VIII - Methods and Theoretical Aspects Springer Proceedings in Mathematics \& Statistics, volume 199, pp.341-349, 2017
The general theory of Babuška ensures necessary and sufficient conditions for a mixed problem in classical or Petrov-Galerkin form to be well posed in the sense of Hadamard. Moreover, the mixed method of Raviart-Thomas with low-level elements can be interpreted as a finite volume method with a non-local gradient. In this contribution, we propose a variant of type Petrov-Galerkin to ensure a local computation of the gradient at the interfaces of the elements. The in-depth study of stability leads to a specific choice of the test functions. With this choice, we show on the one hand that the mixed Petrov-Galerkin obtained is identical to the finite volumes scheme "volumes finis à 4 points" ("VF4") of Faille, Galloüet and Herbin and to the condensation of mass approach developed by Baranger, Maitre and Oudin. On the other hand, we show the stability via an inf-sup condition and finally the convergence with the usual methods of mixed finite elements.
We investigate the piecewise linear nonconforming Crouzeix-Raviar and the lowest order Raviart-Thomas finite-element methods for the Poisson problem on three-dimensional anisotropic meshes. We first give error estimates of the Crouzeix-Raviart and the Raviart-Thomas finite-element approximate problems. We next present the equivalence between the Raviart-Thomas finite-element method and the enriched Crouzeix-Raviart finite-element method. We emphasise that we do not impose either shape-regular or maximum-angle condition during mesh partitioning. Numerical results confirm the results that we obt…
Identities that relate projections of Raviart-Thomas finite element vector fields to discrete gradients of Crouzeix-Raviart finite element functions are derived under general conditions. Various implications such as discrete convex duality results and a characterization of the image of the projection of the Crouzeix-Ravaiart space onto elementwise constant functions are deduced.
We present precise Raviart-Thomas interpolation error estimates on anisotropic meshes. The novel aspect of our theory is the introduction of a new geometric parameter of simplices. It is possible to obtain new anisotropic Raviart-Thoma error estimates using the parameter. We also include corrections to an error in "General theory of interpolation error estimates on anisotropic meshes" (Japan Journal of Industrial and Applied Mathematics, 38 (2021) 163-191), in which Theorem 3 was incorrect.
The hybrid Raviart-Thomas mixed discontinuous Galerkin (HRTMDG) method is proposed for solving the Helmholtz equation. With a new energy norm, we establish the existence and uniqueness of the HRTMDG method, and give its convergence analysis. The corresponding error estimate shows that the HRTMDG method has an optimal $L^2$-norm convergence accuracy which is independent of wavenumber.
For the second lowest-order Raviart--Thomas mixed method, we prove that the canonical interpolant and finite element solution for the vector variable in elliptic problems are superclose in the $H(\text{div})$-norm on mildly structured meshes, where most pairs of adjacent triangles form approximate parallelograms. We then develop a family of postprocessing operators for Raviart--Thomas mixed elements on triangular grids by using the idea of local least squares fittings. Super-approximation property of the postprocessing operators for the lowest and second lowest order Raviart--Thomas elements i…
This paper presents a lowest-order immersed Raviart-Thomas mixed triangular finite element method for solving elliptic interface problems on unfitted meshes independent of the interface. In order to achieve the optimal convergence rates on unfitted meshes, an immersed finite element finite (IFE) is constructed by modifying the traditional Raviart-Thomas element. Some important properties are derived including the unisolvence of IFE basis functions, the optimal approximation capabilities of the IFE space and the corresponding commuting digram. Optimal error estimates are rigorously proved for t…
Raviart-Thomas finite elements of Petrov-Galerkin type
Laboratoire de Mathématiques, Université Paris-Sud（巴黎南大学数学实验室）；Conservatoire National des Arts et Métiers（国立工艺学院）；Laboratoire de Mathématiques et de leurs Applications, UMR CNRS 5142 Université de Pau et des Pays de l’Adour（波城及阿杜尔地区大学数学及其应用实验室）
This paper considers the discretization of the Stokes equations with Scott--Vogelius pairs of finite element spaces on arbitrary shape-regular simplicial grids. A novel way of stabilizing these pairs with respect to the discrete inf-sup condition is proposed and analyzed. The key idea consists in enriching the continuous polynomials of order $k$ of the Scott--Vogelius velocity space with appropriately chosen and explicitly given Raviart--Thomas bubbles. This approach is inspired by [Li/Rui, IMA J. Numer. Anal, 2021], where the case $k=1$ was studied. The proposed method is pressure-robust, wit…
Error estimates for Raviart-Thomas interpolation of any order on anisotropic tetrahedra
Universidad de Buenos Aires（布宜诺斯艾利斯大学）；Universität der Bundeswehr München（德国联邦国防军慕尼黑大学）；Universidad Nacional de General Sarmiento（圣马丁国立大学）；CONICET（阿根廷国家科学研究委员会）
Asymptotic expansions are derived for eigenvalues produced by both the Crouzeix-Raviart element and the enriched Crouzeix--Raviart element. The expansions are optimal in the sense that extrapolation eigenvalues based on them admit a fourth order convergence provided that exact eigenfunctions are smooth enough. The major challenge in establishing the expansions comes from the fact that the canonical interpolation of both nonconforming elements lacks a crucial superclose property, and the nonconformity of both elements. The main idea is to employ the relation between the lowest-order mixed Ravia…
In this paper, an improved superconvergence analysis is presented for both the Crouzeix-Raviart element and the Morley element. The main idea of the analysis is to employ a discrete Helmholtz decomposition of the difference between the canonical interpolation and the finite element solution for the first order mixed Raviart--Thomas element and the mixed Hellan--Herrmann--Johnson element, respectively. This, in particular, allows for proving a full one order superconvergence result for these two mixed finite elements. Finally, a full one order superconvergence result of both the Crouzeix-Raviar…
Within finite element models of fluids, vector-valued fields such as velocity or momentum variables are commonly discretised using the Raviart-Thomas elements. However, when using the lowest-order quadrilateral Raviart-Thomas elements, standard finite element discretisations of the vector transport equation typically have a low order of spatial accuracy. This paper describes two schemes that improve the accuracy of transporting such vector-valued fields on two-dimensional curved manifolds. The first scheme that is presented reconstructs the transported field in a higher-order function space, w…
A Nonconforming Finite Element Method for the Biot's Consolidation Model in Poroelasticity
Tufts University（塔夫茨大学）；Universidad de Zaragoza（萨拉戈萨大学）；Penn State（宾夕法尼亚州立大学）；Institute for Mathematics and Informatics, Bulgarian Academy of Sciences（保加利亚科学院数学与信息学研究所）
The purpose of this work is to describe in detail the development of the Spectral Difference Raviart-Thomas (SDRT) formulation for two and three-dimensional tensor-product elements and simplexes. Through the process, the authors establish the equivalence between the SDRT method and the Flux-Reconstruction (FR) approach under the assumption of the linearity of the flux and the mesh uniformity. Such a connection allows to build a new family of FR schemes for two and three-dimensional simplexes and also to recover the well-known FR-SD method with tensor-product elements. In addition, a thorough a…
We propose two different discrete formulations for the weak imposition of the Neumann boundary conditions of the Darcy flow. The Raviart-Thomas mixed finite element on both triangular and quadrilateral meshes is considered for both methods. One is a consistent discretization depending on a weighting parameter scaling as $\mathcal O(h^{-1})$, while the other is a penalty-type formulation obtained as the discretization of a perturbation of the original problem and relies on a parameter scaling as $\mathcal O(h^{-k-1})$, $k$ being the order of the Raviart-Thomas space. We rigorously prove that bo…
We revise the finite element formulation for Lagrange, Raviart- Thomas, and Taylor-Hood finite element spaces. We solve Laplace equation in first and second order formulation, and compare the solutions obtained with Lagrange and Raviart-Thomas finite element spaces by changing the order of the shape functions and the refinement level of the mesh. Finally, we solve Navier-Stokes equations in a two dimensional domain, where the solution is a steady state, and in a three dimensional domain, where the system presents a turbulent behaviour. All numerical experiments are computed using MFEM library,…
We present a class of discretisation spaces and H(div)-conformal elements that can be built on any polytope. Bridging the flexibility of the Virtual Element spaces towards the element's shape with the divergence properties of the Raviart-Thomas elements on the boundaries, the designed frameworks offer a wide range of H(div)-conformal discretisations. As those elements are set up through degrees of freedom, their definitions are easily amenable to the properties the approximated quantities are wished to fulfil. Furthermore, we show that one straightforward restriction of this general setting sh…
We present a class of discretisation spaces and H(div)-conformal elements that can be built on any polytope. Bridging the flexibility of the Virtual Element spaces towards the element's shape with the divergence properties of the Raviart-Thomas elements on the boundaries, the designed frameworks offer a wide range of H(div)-conformal discretisations. As those elements are set up through degrees of freedom, their definitions are easily amenable to the properties the approximated quantities are wished to fulfill. Furthermore, we show that one straightforward restriction of this general setting s…
This work presents superconvergence estimates of the nonconforming Rannacher--Turek element for second order elliptic equations on any cubical meshes in $\mathbb{R}^{2}$ and $\mathbb{R}^{3}$. In particular, a corrected numerical flux is shown to be superclose to the Raviart--Thomas interpolant of the exact flux. We then design a superconvergent recovery operator based on local weighted averaging. Combining the supercloseness and the recovery operator, we prove that the recovered flux superconverges to the exact flux. As a by-product, we obtain a superconvergent recovery estimate of the Crouzei…
In this paper we analyze a mixed displacement-pseudostress formulation for the elasticity eigenvalue problem. We propose a finite element method to approximate the pseudostress tensor with Raviart-Thomas elements and the displacement with piecewise polynomials. With the aid of the classic theory for compact operators, we prove that our method is convergent and does not introduce spurious modes. Also, we obtain error estimates for the proposed method. Finally, we report some numerical tests supporting the theoretical results.
In this paper we propose and analyse a new formulation and pointwise divergence-free mixed finite element methods for the numerical approximation of Darcy--Brinkman equations in vorticity--velocity--pressure form, coupled with a transport equation for thermal energy with viscous dissipative effect and mixed Navier-type boundary conditions. The solvability analysis of the continuous and discrete problems is significantly more involved than usual as it hinges on Banach spaces needed to properly control the advective and dissipative terms in the non-isothermal energy balance equation. We proceed …
Most classical finite element schemes for the (Navier-)Stokes equations are neither pressure-robust, nor are they inf-sup stable on general anisotropic triangulations. A lack of pressure-robustness may lead to large velocity errors, whenever the Stokes momentum balance is dominated by a strong and complicated pressure gradient. It is a consequence of a method, which does not exactly satisfy the divergence constraint. However, inf-sup stable schemes can often be made pressure-robust just by a recent, modified discretization of the exterior forcing term, using $\mathbf{H}(\operatorname{div})$-co…
We propose and analyze an augmented mixed finite element method for the pseudostress-velocity formulation of the stationary convective Brinkman-Forchheimer problem in $\mathrm{R}^d$, $d\in \{2,3\}$. Since the convective and Forchheimer terms forces the velocity to live in a smaller space than usual, we augment the variational formulation with suitable Galerkin type terms. The resulting augmented scheme is written equivalently as a fixed point equation, so that the well-known Schauder and Banach theorems, combined with the Lax-Milgram theorem, allow to prove the unique solvability of the contin…
Error analysis of mixed finite element methods for nonlinear parabolic equations
School of Mathematics and Statistics, Huazhong University of Science and Technology（华中科技大学数学与统计学院）；Department of Mathematics, City University of Hong Kong（香港城市大学数学系）
