The chapter generalizes results on influence of uniaxial strain and adsorption on the electron states and charge transport or localization in graphene with different configurations of imperfections (point defects): resonant (neutral) adsorbed atoms either oxygen- or hydrogen-containing molecules or functional groups, vacancies or substitutional atoms, charged impurity atoms or molecules, and distortions. To observe electronic properties of graphene-admolecules system, we applied electron paramagnetic resonance technique in a broad temperature range for graphene oxides as a good basis for understanding the electrotransport properties of other active carbons. Applied technique allowed observation of possible metal-insulator transition and sorption pumping effect as well as discussion of results in relation to the granular metal model. The electronic and transport properties are calculated within the framework of the tight-binding model along with the Kubo-Greenwood quantum-mechanical formalism. Depending on electron density and type of the sites, the conductivity for correlated and ordered adsorbates is found to be enhanced in dozens of times as compared to the cases of their random distribution. In case of the uniaxially strained graphene, the presence of point defects counteracts against or contributes to the band-gap opening according to their configurations. The band-gap behaviour is found to be nonmonotonic with strain in case of a simultaneous action of defect ordering and zigzag deformation. The amount of localized charge carriers (spins) is found to be correlated with the content of adsorbed centres responsible for the formation of potential barriers and, in turn, for the localization effects. Physical and chemical states of graphene edges, especially at a uniaxial strain along one of them, play a crucial role in electrical transport phenomena in graphene-based materials.
In this paper, we evaluate of the adsorption/ desorption of ammonia molecules on a graphene surface by studying the Fermi level shift. Based on a physically plausible model, the adsorption and desorption rates of ammonia molecules on graphene have been extracted from the measured Fermi level shift as a function of exposure time. An electric field-induced flipping behavior of ammonia molecules on graphene is suggested, based on field effect transistor (FET) measurements.
We investigate the electronic properties of graphene upon water adsorption and study the influence of the SiO2 substrate in this context using density functional calculations. Perfect suspended graphene is rather insensitive to H2O adsorbates, as doping requires highly oriented H2O clusters. For graphene on a defective SiO2 substrate, we find a strongly different behavior: H2O adsorbates can shift the substrate's impurity bands and change their hybridization with the graphene bands. In this way, H2O can lead to doping of graphene for much lower adsorbate concentrations than for free hanged gra…
We demonstrate the temperature-mediated and completely reversible process of desorption-readsorption of water on a few layers of epitaxial graphene on a 4H-SiC(0001) substrate. We show that under ambient conditions water forms solid structures on top of the second and third layers of graphene. In the case of strained or highly defective graphene domains, these features produce strongly correlated and reproducible patterns, implying importance of the underlying defects for the initial stages of water adsorption. Hydrophobicity increases with number of graphene layers. Evolution of the water lay…
The contact of water with graphene is of fundamental importance and of great interest for numerous promising applications, but how graphene interacts with water remains unclear. Here we used atomic force microscopy to investigate hydrophilic mica substrates with some regions covered by mechanically exfoliated graphene layers in water. In water containing air gas close to the saturation concentration (within ~40%), cap-shaped nanostructures and ordered stripe domains were observed on graphene-covered regions, but not on pure mica regions. These structures did not appear on graphene when samples…
In this letter we report on transport measurements of epitaxial graphene on SiC(0001) with oxygen adsorption. In a $50\times 50 μ\mathrm{m^2}$ size Hall bar we observe the half-integer quantum Hall effect with a transverse resistance plateau quantized at filling factor around $ν= 2$, an evidence of monolayer graphene. We find low electron concentration of $9\times 10^{11} \textrm{cm}^{-2}$ and we show that a doping of $10^{13}\textrm{cm}^{-2}$ which is characteristic of intrinsic epitaxial graphene can be restored by vacuum annealing. The effect of oxygen adsorption on carrier density is confi…
We performed a systematic density functional study of the adsorption of copper, silver, and gold adatoms on graphene, especially accounting for van der Waals interactions by the vdW-DF and the PBE+D2 methods. In particular, we analyze the preferred adsorption site (among top, bridge, and hollow positions) together with the corresponding distortion of the graphene sheet and identify diffusion paths. Both vdW schemes show that the coinage metal atoms do bind to the graphene sheet and that in some cases the buckling of the graphene can be significant. The results for silver are at variance with t…
We devise a theory of adsorption of low-energy atoms on suspended graphene membranes maintained at 10 K based on a model of atom-acoustic phonon interactions. Our primary technique includes a non-perturbative method which treats the dynamics of the multiple phonons in an exact manner within the purview of the Independent Boson Model. We present a study on the effects of the phonons assisting the renormalization as well as decay of the incident atom propagator and discuss results for the many-body adsorption rates for atomic hydrogen on graphene micromembranes. Additionally, we report similarit…
Adsorption of molecular oxygen on B-, N-, Al-, Si-, P-, Cr- and Mn-doped graphene is theoretically studied using density functional theory in order to clarify if O2 can change the possibility of using doped graphene for gas sensors, electronic and spintronic devices. O2 is physisorbed on B-, and Ndoped graphene with small adsorption energy and long distance from the graphene plane, indicating the oxidation will not happen; chemisorption is observed on Al-, Si-, P-, Cr- and Mn-doped graphene. The local curvature caused by the large bond length of X-C (X represents the dopants) relative to CC bo…
We investigate the chemisorptions of oxygen molecules on bilayer graphene (BLG) and its electrically modified charge-doping effect using conductivity measurement of the field effect transistor channeled with BLG. We demonstrate that the change of the Fermi level by manipulating the gate electric field significantly affects not only the rate of molecular adsorption but also the carrier-scattering strength of adsorbed molecules. Exploration of the charge transfer kinetics reveals the electrochemical nature of the oxygen adsorption on BLG. [This document is the unedited Author's version of a Subm…
Two approximations used by Sengupta [Phys. Rev. B {\bf 100}, 075429 (2019)] in numerically computing the adsorption rate of cold hydrogen atoms on suspended graphene are critically examined. The independent boson model approximation (IBMA) was used to compute the atom self-energy, and the single-pole approximation (SPA) was used to obtain the adsorption rate from the self-energy. It is shown explicitly that there are additional contributions to the self-energy appearing at the same order of the atom-phonon coupling as the IBMA terms that alter the value of the real part of the self-energy at l…
We present a theory to study gas molecules adsorption on armchair graphene nanoribbons (AGNRs) by applying the results of \emph{ab} \emph{initio} calculations to the single-band tight-binding approximation. In addition, the effect of edge states on the electronic properties of AGNR is included in the calculations. Under the assumption that the gas molecules adsorb on the ribbon sites with uniform probability distribution, the applicability of the method is examined for finite concentrations of adsorption of several simple gas molecules (CO, NO, CO$_2$, NH$_3$) on 10-AGNR. We show that the stat…
In order to realize applications of hydrogen-adsorbed graphene, a main issue is how to control hydrogen adsorption/desorption at room temperature. In this study, we demonstrate the possibility to tune hydrogen adsorption on graphene by applying a gate voltage. The influence of the gate voltage on graphene and its hydrogen adsorption properties was investigated by electrical transport measurements, scanning tunneling microscopy, and density functional theory calculations. We show that more hydrogen adsorbs on graphene with negative gate voltage (p-type doping), compared to that without gate vol…
There is a tunable band gap in ABC-stacked few-layer graphene (FLG) via applying a vertical electric field, but the operation of FLG-based field effect transistor (FET) requires two gates to create a band gap and tune channel's conductance individually. Using first principle calculations, we propose an alternative scheme to open a band gap in ABC-stacked FLG namely via single-side adsorption. The band gap is generally proportional to the charge transfer density. The capability to open a band gap of metal adsorption decreases in this order: K/Al > Cu/Ag/Au > Pt. Moreover, we find that even the …
The anchoring of benzene molecules on lithium adsorption sites at the surface of graphene and nanoribbons thereof are investigated. The effects of adsorbate densities, specific adsorption locations, and spin states on the structural stability and electronic properties of the underlying graphene derivatives are revealed. At sufficiently high densities, bare lithium adsorption turns armchair graphene nanoribbons metallic and their zigzag counterparts half-metallic due to charge transfer from the adatom to the π electronic system. Upon benzene adsorption, the lithium cation encounters two π syste…
Graphone is a half-hydrogenated graphene. The structure of graphone is illustrated as trigonal adsorption of hydrogen atoms on graphene at first. However, we found the trigonal adsorption is unstable. We present an illustration in detail to explain how a trigonal adsorption geometry evolves into a rectangular adsorption geometry. We check the change of magnetism during the evolution of geometry by evaluating the spin polarization of the intermediate geometries. We prove and clarify that the rectangular adsorption of hydrogen atoms on graphene is the most stable geometry of graphone and graphon…
We have performed first-principles studies on adsorption patterns of hydrogen adatoms on uniaxially strained graphene. Our simulation reveals that the adsorption energy of adatoms are sensitive to the strain. Hydrogen adatoms on zigzag strained graphene tend to form a chain-like adsorption patterns perpendicular to the strain direction, but those under armchair strain cannot form any long-range chain pattern. We explain our results in terms of a tight-binding model and the electronic structure of strained graphene. These anisotropic adsorption behaviors under uniaxial strain suggest methods fo…
We investigate the spatial coarse-graining of interactions in host-guest systems within the framework of the recently proposed Interacting Pair Approximation (IPA). Basically, the IPA method derives local effective interactions from the knowledge of the bivariate histograms of the number of sorbate molecules (occupancy) in a pair of neighboring subvolumes, taken at different values of the chemical potential. Here we extend the IPA approach to the case in which every subvolume is surrounded by more than one class of neighbors, and we apply it on two systems: methane on a single graphene layer a…
Previous experimental observations for H intercalation under graphene on SiC surfaces motivate clarification of configuration stabilities and kinetic processes related to intercalation. From first-principles density-functional-theory (DFT) calculations, we analyze H adsorption and intercalation for graphene on a 6H-SiC(0001) surface, where the system includes two single-atom-thick graphene layers: the top-layer graphene (TLG) and the underling buffer-layer graphene (BLG) above the terminal Si layer. Our chemical potential analysis shows that, in the low-H coverage regime (described by a single…
We have investigated by means of first principles calculations the structural and electronic properties of hydrogenated graphene structures with distinct grain boundary defects. Our total energy results reveal that the adsorption of a single H is more stable at grain boundary defect. The electronic structure of the grains boundaries upon hydrogen adsorption have been examined. Further total energy calculations indicate that the adsorption of two H on two neighbor carbons, forming a basic unit of graphane, is more stable at the defect region. Therefore, we expect that these extended defects wou…
Although very similar in many technological applications, graphene and MoS2 bear significant differences if exposed to humid environments. As an example, lubrication properties of graphene are reported to improve while those of MoS2 to deteriorate: it is unclear whether this is due to oxidation from disulfide to oxide or to water adsorption on the sliding surface. By means of ab initio calculations we show here that these two layered materials have similar adsorption energies for water on the basal planes. They both tend to avoid water intercalation between their layers and to display only mil…
The understanding of atomic adsorption on graphene is of high importance for many advanced technologies. Here we present a complete database of the atomic adsorption energies for the elements of the Periodic Table up to the atomic number 86 (excluding lanthanides) on pristine graphene. The energies have been calculated using the projector augmented wave (PAW) method with PBE, long-range dispersion interaction corrected PBE (PBE+D2, PBE+D3) as well as non-local vdW-DF2 approach. The inclusion of dispersion interactions leads to an exothermic adsorption for all the investigated elements. Dispers…
The adsorption effects of small molecules (H$_{2}$O, CO, NH$_{3}$, NO$_{2}$) and large molecules (Tetracyanoquinodimethane (TCNQ) and Tetrafluoro-tetracyanoquinodimethane (F4TCNQ)) on electronic and magnetic properties of two triangular graphene antidot lattices (GALs), $[10,3,6]_{RTA}$ and $[10, 5]_{ETA}$, are investigated by means of first-principles calculations. We find that CO, NO$_{2}$, TCNQ, and F4TCNQ molecules are chemisorbed by both antidots, whereas NH$_{3}$ is physisorbed (chemisorbed) by $[10, 5]_{ETA}$ ($[10,3,6]_{RTA}$) structure. H$_{2}$O, CO, NH$_{3}$ molecules reveal no signi…
Graphene functionalization by hydrogen and fluorine has been proposed as a route to modulate its reactivity and electronic properties. However, until now, proposed systems present degradation and limited hydrogen adsorption capacity. In this study, combining first-principles calculations based on density functional theory (DFT) and reactive molecular dynamics, we analyze the tuning of hydrogen adsorption and electronic properties in fluorinated and hydrogenated monolayer graphenes. Our results indicate that fluorine adsorption promotes stronger carbon$-$hydrogen bonds. By changing the concentr…
Hydrogen adsorption on graphene in commensurate periodic arrangements leads to bandgap opening at the Dirac point and the emergence of dispersionless midgap bands. We study these bandgap effects and their dependence on periodicity for a single hydrogen adsorbate on periodic graphene supercells using spin-polarized density-functional theory calculations. Our results show that for certain periodicities, marked by a scale factor of three, the bandgap is suppressed to a great extent, and has a special level structure around the neutrality point. We present explanations for the origin of the change…
X-ray powder diffraction using a synchrotron light source reveals significant modifications to both morphology and strain state in Palladium nanocubes after oxidation. Short-range strain measured by the static component of the Debye-Waller coefficient is observed to be higher in the oxidized nanoparticles; while long-range strain related to the line broadening of the diffraction peaks is seen to decrease. Using multiscale modelling with classical molecular dynamics and density functional theory, we connect the decrease in long-range strain to the increased truncation of the oxidized nanocubes,…
The ability of atomic hydrogen to chemisorb on graphene makes the latter a promising material for hydrogen storage. Based on scanning tunneling microscopy techniques, we report on site-selective adsorption of atomic hydrogen on convexly curved regions of monolayer graphene grown on SiC(0001). This system exhibits an intrinsic curvature owing to the interaction with the substrate. We show that at low coverage hydrogen is found on convex areas of the graphene lattice. No hydrogen is detected on concave regions. These findings are in agreement with theoretical models which suggest that both bindi…
We use the non-interacting tight-binding model to study the effect of isolated hydrogen adsorbates on the quasiparticle spectra of single-layer graphene. Using the Green's function approach, we obtain analytic expressions for the local density of states and the spectral function of hydrogen-doped graphene, which are also numerically evaluated and plotted. Our results are relevant for the interpretation of scanning tunneling microscopy and angle-resolved photoemission spectroscopy data of functionalized graphene.
The absorption energy of atomic hydrogen at rotated graphene bilayers is studied using ab initio methods based on the density functional theory including van der Waals interactions. We find that, due to the surface corrugation induced by the underneath rotated layer and the perturbation of the electronic density of states near the Fermi energy, the atoms with an almost AA stacking are the preferential ones for hydrogen chemisorption. The adsorption energy difference between different atoms can be as large as 80 meV. In addition, we find that, due to the logarithmic van Hove singularities in th…
Structural distortions in nano-materials can induce dramatic changes in their electronic properties. This situation is well manifested in graphene, a two-dimensional honeycomb structure of carbon atoms with only one atomic layer thickness. In particular, strained graphene can result in both charging effects and pseudo-magnetic fields, so that controlled strain on a perfect graphene lattice can be tailored to yield desirable electronic properties. Here we describe the theoretical foundation for strain-engineering of the electronic properties of graphene, and then provide experimental evidences …
Strain can tune desirable electronic behavior in graphene, but there has been limited progress in controlling strain in graphene devices. In this paper, we study the mechanical response of graphene on substrates patterned with arrays of mesoscale pyramids. Using atomic force microscopy, we demonstrate that the morphology of graphene can be controlled from conformal to suspended depending on the arrangement of pyramids and the aspect ratio of the array. Non-uniform strains in graphene suspended across pyramids are revealed by Raman spectroscopy and supported by atomistic modeling, which also in…
We study the possibility of realizing topological phases in graphene with randomly distributed adsorbates. When graphene is subjected to periodically distributed adatoms, the enhanced spin-orbit couplings can result in various topological phases. However, at certain adatom coverages, the intervalley scattering renders the system a trivial insulator. By employing a finite-size scaling approach and Landauer-Büttiker formula, we show that the randomization of adatom distribution greatly weakens the intervalley scattering, but plays a negligible role in spin-orbit couplings. Consequently, such a r…
Impact of induced strain on charge carrier mobility is investigated for a monolayer graphene sheet. Mobility is computed within Born approximation by including impurity scattering, surface roughness effects and interaction with lattice phonons. Unlike its sSi counterpart, strained graphene shows a drop in mobility with increasing strain. Main reason for this effect is decrease in Fermi velocity due to induced distortions in the graphene honeycomb.
We aim to understand how the van der Waals force between neutral adatoms and a graphene layer is modified by uniaxial strain and electron correlation effects. A detailed analysis is presented for three atoms (He, H, and Na) and graphene strain ranging from weak to moderately strong. We show that the van der Waals potential can be significantly enhanced by strain, and present applications of our results to the problem of elastic scattering of atoms from graphene. In particular we find that quantum reflection can be significantly suppressed by strain, meaning that dissipative inelastic effects n…
Hydrogen adsorption on graphene can be increased by functionalization with Ti. This requires dispersing Ti islands on graphene as small and dense as possible, in order to increase the number of hydrogen adsorption sites per Ti atom. In this report, we investigate the morphology of Ti on nanocrystalline graphene and its hydrogen adsorption by scanning tunneling microscopy and thermal desorption spectroscopy, and compare the results with equivalent measurements on single-crystalline graphene. Nanocrystalline graphene consists of extremely small crystal grains of < 5 nm size. Ti atoms preferentia…
Spatially nonuniform strain is important for engineering the pseudomagnetic field and band structure of graphene. Despite the wide interest in strain engineering, there is still a lack of control on device-compatible strain patterns due to the limited understanding of the structure-strain relationship. Here, we study the effect of substrate corrugation and curvature on the strain profiles of graphene via combined experimental and theoretical studies of a model system: graphene on closely packed SiO2 nanospheres with different diameters (20-200 nm). Experimentally, via quantitative Raman analys…
An analytical study of low-energy electronic excited states in an uniformly strained graphene is carried out up to second-order in the strain tensor. We report an new effective Dirac Hamiltonian with an anisotropic Fermi velocity tensor, which reveals the graphene trigonal symmetry being absent in low-energy theories to first-order in the strain tensor. In particular, we demonstrate the dependence of the Dirac-cone elliptical deformation on the stretching direction respect to graphene lattice orientation. We further analytically calculate the optical conductivity tensor of strained graphene an…
We present a molecular modeling study analyzing nanometer-scale strain variations in graphene as a function of externally applied tensile strain. We consider two different mechanisms that could underlie nanometer-scale strain variations: static perturbations from lattice imperfections of an underlying substrate and thermal fluctuations. For both cases we observe a decrease in the out-of-plane atomic displacements with increasing strain, which is accompanied by an increase in the in-plane displacements. Reflecting the non-linear elastic properties of graphene, both trends together yield a non-m…
The theoretical results are presented showing that strain-induced anisotropy of graphene spectrum gives rise to the valley currents under the illumination by normally incident light. The currents of the two graphene valleys are mutually compensated providing zero net electric current. The magnitude and direction of the valley currents are determined by the parameters of strain and light polarization. For not too high photon energy strain-induced valley current exceed that due to intrinsic warping of the graphene spectrum which suggests feasibility of strain-mediated valleytronics.
Misfit strain is inevitable in various heterostructures like the graphene/MoS 2 van der Waals heterostructure. Although the misfit strain effect on electronic and other physical properties have been well studied, it is still unclear how will the misfit strain affect the performance of the nanomechanical resonator based on the graphene/MoS 2 heterostructure. By performing molecular dynamics simulations, we disclose a misfit strain-induced decoupling phenomenon between the graphene layer and the MoS 2 layer during the resonant oscillation of the heterostructure. A direct relationship between the…
Graphene is an atomically thin metallic membrane capable of sustaining reversible strain and offers a tempting prospect of controlling its optoelectronic properties via strain. Graphenes exceptional mechanical flexibility and tensile strength provide a lot of room for strain engineering. Here we use the self-rolled-up membrane platform for strain engineering and integration of graphene with stressed dielectric thin films. Graphene rolls up or down together with the stressed film upon releasing from the substrate and the curvature of the rolled-up film stack enables the strain tuning of the gra…
Patterning graphene into various mesoscopic devices such as nanoribbons, quantum dots, etc. by lithographic techniques has enabled the guiding and manipulation of graphene's Dirac-type charge carriers. Graphene, with well-defined strain patterns, holds promise of similarly rich physics while avoiding the problems created by the hard to control edge configuration of lithographically prepared devices. To engineer the properties of graphene via mechanical deformation, versatile new techniques are needed to pattern strain profiles in a controlled manner. Here we present a process by which strain c…
We study the effect of uniaxial strain on the transmission and the conductivity across a strain-induced barrier in graphene. At variance with conventional studies, which consider sharp barriers, we consider a more realistic, smooth barrier, characterized by a nonuniform, continuous strain profile. Our results are instrumental towards a better understanding of the transport properties in corrugated graphene.
An odd number of zigzag edges in armchair graphene nanoribbons and their mechanical properties (e.g., Young's modulus, Poisson ratio and shear modulus) have potential interest for bandgap engineering in graphene based optoelectronic devices. In this paper, we consider armchair graphene nanoribbons passivated with hydrogen at the armchair edges and then apply the strain for tuning the bandgaps. Using density functional theory calculations, our study finds that the precise control of strain can allow tuning the bandgap from semiconductor to mettalic and then again switching back to semiconductor…
We propose a new class of semiconducting graphene-based nanostructures: hydrogenated graphene nanoripples (HGNRs), based on continuum-mechanics analysis and first principles calculations. They are formed via a two-step combinatorial approach: first by strain engineered pattern formation of graphene nanoripples, followed by a curvature-directed self-assembly of H adsorption. It offers a high level of control of the structure and morphology of the HGNRs, and hence their band gaps which share common features with graphene nanoribbons. A cycle of H adsorption/desorption at/from the same surface lo…
We study the low temperature properties of a single layer of parahydrogen adsorbed on graphene, by means of Quantum Monte Carlo simulations. The computed phase diagram is very similar to that of helium on the same substrate, featuring commensurate solid phases with fillings 1/3 and 7/16, as well as domain wall phases at intermediate coverages. At higher coverage the system transitions to an incommensurate, compressible phase. Evidence of promotion of molecules to the second layer is observed at a coverage close 0.112 inverse square Angstroms, significantly above existing theoretical estimates.
It has been shown in a recent study [Nguyen et al., Nanotechnol. \textbf{25}, 165201 (2014)] that unstrained/strained graphene junctions are promising candidates to improve the performance of graphene transistors that is usually hindered by the gapless nature of graphene. Although the energy bandgap of strained graphene still remains zero, the shift of Dirac points in the \textbf{\emph{k}}-space due to strain-induced deformation of graphene lattice can lead to the appearance of a finite conduction gap of several hundreds meV in strained junctions with a strain of only a few percent. However, s…
The electron-transport properties of adatom-graphene system are investigated for different (random, correlated, and ordered) spatial configurations of adatoms over different types of high symmetry sites with various adsorption heights. K adatoms in monolayer graphene are modeled by the scattering potential adapted from the independent self-consistent ab initio calculations. The results are obtained numerically using the quantum-mechanical Kubo-Greenwood formalism. A band gap may be opened only if ordered adatoms act as substitutional atoms, while there is no band gap opening for adatoms acting…
The discovery of fullerenes has stimulated extensive exploration of the resulting behavior of adsorbed films. Our study addresses the planar substrates graphene-fluoride (GF) and graphane (GH) in comparison to graphene. We present initial results concerning the potential energy, energy bands and low density behavior of 4He and 3He films on such different surfaces. For example, while graphene presents an adsorption potential that is qualitatively similar to that on graphite, GF and GH yield potentials with different symmetry, a number of adsorption sites double that on graphene/graphite and a l…
As most materials available in macroscopic quantities, graphene appears in a polycrystalline form and thus contains grain boundaries. In the present work, the effect of uniaxial strain on the electronic transport properties through graphene grain boundaries is investigated using atomistic simulations. A systematic picture of the transport properties with respect to the strain and the lattice symmetry of graphene domains on both sides of the boundary is provided. In particular, it is shown that the strain engineering can be used to open a finite transport gap in all graphene systems where two d…
We theoretically study the transmittance for normal incidence of linearly polarized light between two media separated by a strained graphene monolayer. We analytically characterize the degree of dichroism and the transparency of graphene as a function of an arbitrary uniform strain and the incident polarization. We discuss how measurements of dichroism and transparency for two different polarization directions can be used to determine the magnitude and direction of strain. Ours findings result in very useful tools to tune the graphene absorption by mechanical strain, as well as to design nano-…
The interaction between a graphene layer and a hexagonal Boron Nitride (hBN) substrate induces lateral displacements and strains in the graphene layer. The displacements lead to the appearance of commensurate regions and the existence of an average gap in the electronic spectrum of graphene. We present a simple, but realistic model, by which the displacements, strains and spectral gap can be derived analytically from the adhesion forces between hBN and graphene. When the lattice axes of graphene and the substrate are aligned, strains reach a value of order 2\%, leading to effective magnetic fi…
Strain engineering is one of the key technologies for using graphene as an electronic device: the strain-induced pseudo-gauge field reflects Dirac electrons, thus opening the so-called conduction gap. Since strain accumulates in constrictions, graphene nanoconstrictions can be a good platform for this technology. On the other hand, in the graphene nanoconstrictions, Fabry-Perot type quantum interference dominates the electrical conduction at low bias voltages. We argue that these two effects have different strain dependence; the pseudo-gauge field contribution is symmetric with respect to posi…
A method for inducing nonuniform strain in graphene films is developed. Pillars made of a dielectric material (electron beam resist) are placed between graphene and the substrate, and graphene sections between pillars are attached to the substrate. The strength and spatial pattern of the strain can be controlled by the size and separation of the pillars. Application of strain is confirmed by Raman spectroscopy as well as from scanning electron microscopy (SEM) images. From SEM images, the maximum stretch of the graphene film reaches about 20%. This technique can be applied to the formation of …
The adsorption of fluorine, chlorine, bromine, and iodine diatomic molecules on graphene has been investigated using density functional theory with taking into account nonlocal correlation effects by means of vdW-DF approach. It is shown that the van der Waals interaction plays a crucial role in the formation of chemical bonding between graphene and halogen molecules, and is therefore important for a proper description of adsorption in this system. In-plane orientation of the molecules has been found to be more stable than the orientation perpendicular to the graphene layer. In the cases of F$…
In this work, we adopt first-principle calculations based on density functional theory and Kinetic Monte Carlo simulations to investigate the adsorption and diffusion of lithium in bilayer graphene (BLG) as anodes in lithium-ion batteries. Based on energy barriers directly obtained from first-principle calculations for single-Li and two-Li intercalated BLG, a new equation was deduced for predicting energy barriers considering Li's interactions for multi-Li intercalated BLG. Our calculated results indicate that Li energetically prefers to intercalate within rather than adsorb outside the bilaye…
The effect of oxygen adsorption on the local structure and electronic properties of monolayer graphene grown on SiC(0001) has been studied by means of Low Energy Electron Microscopy (LEEM), microprobe Low Energy Electron Diffraction (\muLEED) and microprobe Angle Resolved Photoemission (\muARPES). We show that the buffer layer of epitaxial graphene on SiC(0001) is partially decoupled after oxidation. The monitoring of the oxidation process demonstrates that the oxygen saturates the Si dangling bonds, breaks some Si-C bonds at the interface and intercalates the graphene layer. Accurate control …
