The lattice Boltzmann method (LBM) is emerging as a powerful engineering tool for aeroacoustic computations. However, the LBM has been shown to present accuracy and stability issues in the medium-low Mach number range, that is of interest for aeroacoustic applications. Several solutions have been proposed but often are too computationally expensive, do not retain the simplicity and the advantages typical of the LBM, or are not described well enough to be usable by the community due to proprietary software policies. We propose to use an original regularized collision operator, based on the expansion in Hermite polynomials, that greatly improves the accuracy and stability of the LBM without altering significantly its algorithm. The regularized LBM can be easily coupled with both non-reflective boundary conditions and a multi-level grid strategy, essential ingredients for aeroacoustic simulations. Excellent agreement was found between our approach and both experimental and numerical data on two different benchmarks: the laminar, unsteady flow past a 2D cylinder and the 3D turbulent jet. Finally, most of the aeroacoustic computations with LBM have been done with commercial softwares, while here the entire theoretical framework is implemented on top of an open source library (Palabos).
The present study proposes a highly accurate lattice Boltzmann direct coupling cell-vertex algorithm, well suited for industrial purposes, making it highly valuable for aeroacoustic applications. It is indeed known that the convection of vortical structures across a grid refinement interface, where cell size is abruptly doubled, is likely to generate spurious noise that may corrupt the solution over the whole computational domain. This issue becomes critical in the case of aeroacoustic simulations, where accurate pressure estimations are of paramount importance. Consequently, any interfering n…
A new lattice Boltzmann scheme associated with flexible specific heat ratio is proposed. The new free degree is introduced via the internal energy associated with the internal structure. The evolution equation of the distribution function is reduced to two evolution equations. One is connected to the density and velocity, the other is of the energy. A two-dimensional lattice Boltzmann model and a three-dimensional lattice Boltzmann model are derived via the Hermite expansion. The two lattice Boltzmann models are applied to simulating the shock tube of one dimension. Good agreement between the …
A decoupled scheme based on the Hermite expansion to construct lattice Boltzmann models for the compressible Navier-Stokes equations with arbitrary specific heat ratio is proposed. The local equilibrium distribution function including the rotational velocity of particle is decoupled into two parts, i.e. the local equilibrium distribution function of the translational velocity of particle and that of the rotational velocity of particle. From these two local equilibrium functions, two lattice Boltzmann models are derived via the Hermite expansion, namely one is in relation to the translational v…
The central framework of a filtered lattice Boltzmann collision operator formulation is to remove hydrodynamic moments that are not supported by the order of isotropy of a given lattice velocity set. Due to the natural moment orthogonality of the Hermite polynomials, the form of a filtered collision operator is obtained directly via truncation of the Hermite expansion. In this paper, we present an extension of the filtered collision operator formulation to enforce Galilean invariance. This is accomplished by representing hydrodynamic moments in the relative reference frame with respect to loca…
In this paper, we employ the lattice Boltzmann method to solve the Boltzmann equation with the Shakhov model for the collision integral in the context of the 3D planar Couette flow. The half-range Gauss-Hermite quadrature is used to account for the wall-induced discontinuity in the distribution function. The lattice Boltzmann simulation results are compared with direct simulation Monte Carlo (DSMC) results for ${}^3{\rm He}$ and ${}^4{\rm He}$ atoms interacting via ab initio potentials, at various values of the rarefaction parameter $δ$, where the temperature of the plates varies from $1\ {\rm…
The present study focuses on the unphysical effects induced by the use of non-uniform grids in the lattice Boltzmann method. In particular, the convection of vortical structures across a grid refinement interface is likely to generate spurious noise that may impact the whole computation domain. This issue becomes critical in the case of aeroacoustic simulations, where accurate pressure estimations are of paramount importance. The purpose of this article is to identify the issues occurring at the interface and to propose possible solutions yielding significant improvements for aeroacoustic simu…
In the work of N. Martys et al. [Nicos S. Martys, Xiaowen Shan, Hudong Chen, Phys. Rev. E, Vol. 58, Num.5, 1998 ], a self-consistent force term to any order in the Boltzmann-BKG equation is derived by the Hermite basis with raw velocity. As an extension, in the present work, the force term is expanded by the Hermite basis with the relative velocity in the comoving coordinate and the Hermite basis with the relative velocity scaled by the local temperature. It is found that the force scheme proposed by He et al. [Xiaoyi He, Xiaowen Shan, Gary D. Doolen, Phys. Rev. E, Vol. 57, Num.1,1998] can be …
Background and objective: Contrary to flows in small intracranial vessels, many blood flow configurations such as those found in aortic vessels and aneurysms involve larger Reynolds numbers and, therefore, transitional or turbulent conditions. Dealing with such systems require both robust and efficient numerical methods. Methods: We assess here the performance of a lattice Boltzmann solver with full Hermite expansion of the equilibrium and central Hermite moments collision operator at higher Reynolds numbers, especially for under-resolved simulations. To that end the food and drug administrati…
In this paper, we consider the Boltzmann equation with respect to orthonormal vielbein fields in conservative form. This formalism allows the use of arbitrary coordinate systems to describe the space geometry, as well as of an adapted coordinate system in the momentum space, which is linked to the physical space through the use of vielbeins. Taking advantage of the conservative form, we derive the macroscopic equations in a covariant tensor notation, and show that the hydrodynamic limit can be obtained via the Chapman-Enskog expansion in the Bhatnaghar-Gross-Krook (BGK) approximation for the c…
In the present paper a lattice Boltzmann scheme is presented which exhibits an increased stability and accuracy with respect to standard single- or multi-relaxation-time (MRT) approaches. The scheme is based on a single-relaxation-time model where a special regularization procedure is applied. This regularization is based on the fact that, for a-thermal flows, there exists a recursive way to express the velocity distribution function at any order (in the Hermite series sense) in terms of the density, velocity, and stress tensor. A linear stability analysis is conducted which shows enhanced dis…
We determine properties of the lattice Boltzmann method for semiclassical fluids, which is based on the Boltzmann equation and the equilibrium distribution function is given either by the Bose-Einstein or the Fermi-Dirac ones. New D-dimensional polynomials, that generalize the Hermite ones, are introduced and we find that the weight that renders the polynomials orthonormal has to be approximately equal, or equal, to the equilibrium distribution function itself for an efficient numerical implementation of the lattice Boltzmann method. In light of the new polynomials we discuss the convergence o…
Rooted from the gas kinetics, the lattice Boltzmann method is a powerful tool in modeling hydrodynamics. In the past decade, it has been extended to simulate the rarefied gas flow beyond the Navier-Stokes level, either by using the high-order Gauss-Hermite quadrature, or by introducing the relaxation time that is a function of the gas-wall distance. While the former method, with a limited number of discrete velocities (i.e. D2Q36), is accurate up to the early transition flow regime, the latter method, with the same discrete velocities as that used in simulating hydrodynamics (i.e. D2Q9), is ac…
In the frame of the Boltzmann equation, wall-bounded flows of rarefied gases require the implementation of boundary conditions at the kinetic level. Such boundary conditions induce a discontinuity in the distribution function with respect to the component of the momentum which is normal to the boundary. Expanding the distribution function with respect to half-range polynomials allows this discontinuity to be captured. The implementation of this concept has been reported in the literature only for force-free flows. In the case of general forces which can have non-zero components in the directio…
A lattice Boltzmann method is proposed based on the expansion of the equilibrium distribution function in powers of a new set of generalized orthonormal polynomials which are here presented. The new polynomials are orthonormal under the weight defined by the equilibrium distribution function itself. The D-dimensional Hermite polynomials is a sub-case of the present ones, associated to the particular weight of a gaussian function. The proposed lattice Boltzmann method allows for the treatment of semi-classical fluids, such as electrons in metals under the Drude-Sommerfeld model, which is a part…
A lattice Boltzmann method (LBM) with enhanced stability and accuracy is presented for various Hermite tensor-based lattice structures. The collision operator relies on a regularization step, which is here improved through a recursive computation of non-equilibrium Hermite polynomial coefficients. In addition to the reduced computational cost of this procedure with respect to the standard one, the recursive step allows to considerably enhance the stability and accuracy of the numerical scheme by properly filtering out second (and higher) order non-hydrodynamic contributions in under-resolved c…
The cascaded or central-moments-based lattice Boltzmann method (CM-LBM) is a robust alternative to the more conventional BGK-LBM for the simulation of high-Reynolds number flows. Unfortunately, its original formulation makes its extension to a broader range of physics quite difficult. To tackle this issue, a recent work [A. De Rosis, Phys. Rev. E 95, 013310 (2017)] proposed a more generic way to derive concise and efficient three-dimensional CM-LBMs. Knowing the original model also relies on central moments that are derived in an adhoc manner, i.e., by mimicking those of the Maxwell-Boltzmann …
The three-dimensional Couette flow between parallel plates is addressed using mixed lattice Boltzmann models which implement the half-range and the full-range Gauss-Hermite quadratures on the Cartesian axes perpendicular and parallel to the walls, respectively. The ability of our models to simulate rarefied flows are validated through comparison against previously reported results obtained using the linearized Boltzmann-BGK equation for values of the Knudsen number (Kn) up to $100$. We find that recovering the non-linear part of the velocity profile (i.e., its deviation from a linear function)…
Modelling the vascular transport and adhesion of man-made particles is crucial for optimizing their efficacy in the detection and treatment of diseases. Here, a Lattice Boltzmann and Immersed Boundary methods are combined together for predicting the near wall dynamics of particles with different shapes in a laminar flow. For the lattice Boltzmann modelling, a Gauss-Hermite projection is used to derive the lattice equation, wall boundary conditions are imposed through the Zou-He framework, and a moving least squares algorithm accurately reconstructs the forcing term accounting for the immersed …
A unified MRT-LB framework for Navier-Stokes and nonlinear convection-diffusion equations and beyond: moment equations, auxiliary moments, multispeed lattices, and Hermite matrices
This work thoroughly investigates a semi-Lagrangian lattice Boltzmann (SLLBM) solver for compressible flows. In contrast to other LBM for compressible flows, the vertices are organized in cells, and interpolation polynomials up to fourth order are used to attain the off-vertex distribution function values. Differing from the recently introduced Particles on Demand (PoD) method, the method operates in a static, non-moving reference frame. Yet the SLLBM in the present formulation grants supersonic flows and exhibits a high degree of Galilean invariance. The SLLBM solver allows for an independent…
