As with classic statistics, functional regression models are invaluable in the analysis of functional data. While there are now extensive tools with accompanying theory available for linear models, there is still a great deal of work to be done concerning nonlinear models for functional data. In this work we consider the Additive Function-on-Function Regression model, a type of nonlinear model that uses an additive relationship between the functional outcome and functional covariate. We present an estimation methodology built upon Reproducing Kernel Hilbert Spaces, and establish optimal rates of convergence for our estimates in terms of prediction error. We also discuss computational challenges that arise with such complex models, developing a representer theorem for our estimate as well as a more practical and computationally efficient approximation. Simulations and an application to Cumulative Intraday Returns around the 2008 financial crisis are also provided.
High dimensional nonparametric regression is an inherently difficult problem with known lower bounds depending exponentially in dimension. A popular strategy to alleviate this curse of dimensionality has been to use additive models of \emph{first order}, which model the regression function as a sum of independent functions on each dimension. Though useful in controlling the variance of the estimate, such models are often too restrictive in practical settings. Between non-additive models which often have large variance and first order additive models which have large bias, there has been little…
Recently, fitting probabilistic models have gained importance in many areas but estimation of such distributional models with very large data sets is a difficult task. In particular, the use of rather complex models can easily lead to memory-related efficiency problems that can make estimation infeasible even on high-performance computers. We therefore propose a novel backfitting algorithm, which is based on the ideas of stochastic gradient descent and can deal virtually with any amount of data on a conventional laptop. The algorithm performs automatic selection of variables and smoothing para…
Support vector machines (SVMs) are special kernel based methods and belong to the most successful learning methods since more than a decade. SVMs can informally be described as a kind of regularized M-estimators for functions and have demonstrated their usefulness in many complicated real-life problems. During the last years a great part of the statistical research on SVMs has concentrated on the question how to design SVMs such that they are universally consistent and statistically robust for nonparametric classification or nonparametric regression purposes. In many applications, some qualita…
We study minimax rates for high-dimensional linear regression with additive errors under the $\ell_p\ (1\leq p<\infty)$-losses, where the regression parameter is of weak sparsity. Our lower and upper bounds agree up to constant factors, implying that the proposed estimator is minimax optimal.
A $d$-dimensional nonparametric additive regression model with dependent observations is considered. Using the marginal integration technique and wavelets methodology, we develop a new adaptive estimator for a component of the additive regression function. Its asymptotic properties are investigated via the minimax approach under the $\mathbb{L}_2$ risk over Besov balls. We prove that it attains a sharp rate of convergence which turns to be the one obtained in the $\iid$ case for the standard univariate regression estimation problem.
We establish asymptotic normality for estimators of the additive regression components under random censorship. To build our estimators, we couple the marginal integration method (Newey (1994)) with an initial Inverse Probability of Censoring Weighted estimator of the multivariate censored regression function introduced by Carbonez et al. (1995) and Kohler et al. (2002). Asymptotic confidence bands are derived from our result.
In multivariate regression estimation, the rate of convergence depends on the dimension of the regressor. This fact, known as the curse of the dimensionality, motivated several works. The additive model, introduced by Stone (10), offers an efficient response to this problem. In the setting of continuous time processes, using the marginal integration method, we obtain the quadratic convergence rate and the asymptotic normality of the components of the additive model.
Asymptotic equivalence for nonparametric additive regression
Institut f\"ur Statistik und Operations Research, Universit\"at Wien, Oskar-Morgenstern-Platz 1, 1090 Wien, Austria e1；Department, University or Company Name [Additional affiliations should be put in the Acknowledgments section] e1；Department, University or Company Name [Additional affiliations should be put in the Acknowledgments section] e2,e3
In a recent paper Birke and Bissantz (2008) considered the problem of nonparametric estimation in inverse regression models with convolution-type operators. For multivariate predictors nonparametric methods suffer from the curse of dimensionality and we consider inverse regression models with the additional qualitative assumption of additivity. In these models several additive estimators are studied. In particular, we investigate estimators under the random design assumption which are applicable when observations are not available on a grid. Finally, we compare this estimator with the marginal…
This paper is about optimal estimation of the additive components of a nonparametric, additive isotone regression model. It is shown that asymptotically up to first order, each additive component can be estimated as well as it could be by a least squares estimator if the other components were known. The algorithm for the calculation of the estimator uses backfitting. Convergence of the algorithm is shown. Finite sample properties are also compared through simulation experiments.
We consider estimation in a sparse additive regression model with the design points on a regular lattice. We establish the minimax convergence rates over Sobolev classes and propose a Fourier-based rate-optimal estimator which is adaptive to the unknown sparsity and smoothness of the response function. The estimator is derived within Bayesian formalism but can be naturally viewed as a penalized maximum likelihood estimator with the complexity penalties on the number of nonzero univariate additive components of the response and on the numbers of the nonzero coefficients of their Fourer expansio…
We suggest a new method, called Functional Additive Regression, or FAR, for efficiently performing high-dimensional functional regression. FAR extends the usual linear regression model involving a functional predictor, $X(t)$, and a scalar response, $Y$, in two key respects. First, FAR uses a penalized least squares optimization approach to efficiently deal with high-dimensional problems involving a large number of functional predictors. Second, FAR extends beyond the standard linear regression setting to fit general nonlinear additive models. We demonstrate that FAR can be implemented with a …
It has been recently shown that nonparametric estimators of the additive regression function could be obtained in the presence of right censoring by coupling the marginal integration method with initial kernel-type Inverse Probability of Censoring Weighted estimators of the multivariate regression function \citeDebbarhViallon3. In this paper, we get the exact rate of strong uniform consistency for such estimators. Our uniform limit laws especially lead to the construction of asymptotic simultaneous 100% confidence bands for the true regression function.
In this paper, we study an additive model where the response variable is Hilbert-space-valued and predictors are multivariate Euclidean, and both are possibly imperfectly observed. Considering Hilbert-space-valued responses allows to cover Euclidean, compositional, functional and density-valued variables. By treating imperfect responses, we can cover functional variables taking values in a Riemannian manifold and the case where only a random sample from a density-valued response is available. This treatment can also be applied in semiparametric regression. Dealing with imperfect predictors all…
In the setting of additive regression model for continuous time process, we establish the optimal uniform convergence rates and optimal asymptotic quadratic error of additive regression. To build our estimate, we use the marginal integration method.
We look into the nonparametric regression estimation with additive and multiplicative noise and construct adaptive thresholding estimators based on Laguerre series. The proposed approach achieves asymptotically near-optimal convergence rates when the unknown function belongs to Laguerre-Sobolev space. We consider the problem under two noise structures; (1) { i.i.d.} Gaussian errors and (2) long-memory Gaussian errors. In the { i.i.d.} case, our convergence rates are similar to those found in the literature. In the long-memory case, the convergence rates depend on the long-memory parameters onl…
This paper is concerned with asymptotic theory for penalized spline estimator in bivariate additive model. The focus of this paper is put upon the penalized spline estimator obtained by the backfitting algorithm. The convergence of the algorithm as well as the uniqueness of its solution are shown. The asymptotic bias and variance of penalized spline estimator are derived by an efficient use of the asymptotic results for the penalized spline estimator in marginal univariate model. Asymptotic normality of estimator is also developed, by which an approximate confidence interval can be obtained. S…
In this paper we introduce a novel model for Gaussian process (GP) regression in the fully Bayesian setting. Motivated by the ideas of sparsification, localization and Bayesian additive modeling, our model is built around a recursive partitioning (RP) scheme. Within each RP partition, a sparse GP (SGP) regression model is fitted. A Bayesian additive framework then combines multiple layers of partitioned SGPs, capturing both global trends and local refinements with efficient computations. The model addresses both the problem of efficiency in fitting a full Gaussian process regression model and …
We use local polynomial fitting to estimate the nonparametric M-regression function for strongly mixing stationary processes $\{(Y_{i},\underline{X}_{i})\}$. We establish a strong uniform consistency rate for the Bahadur representation of estimators of the regression function and its derivatives. These results are fundamental for statistical inference and for applications that involve plugging in such estimators into other functionals where some control over higher order terms are required. We apply our results to the estimation of an additive M-regression model.
Additive regression provides an extension of linear regression by modeling the signal of a response as a sum of functions of covariates of relatively low complexity. We study penalized estimation in high-dimensional nonparametric additive regression where functional semi-norms are used to induce smoothness of component functions and the empirical $L_2$ norm is used to induce sparsity. The functional semi-norms can be of Sobolev or bounded variation types and are allowed to be different amongst individual component functions. We establish new oracle inequalities for the predictive performance o…
We establish some uniform limit results in the setting of additive regression model estimation. Our results allow to give an asymptotic 100% confidence bands for these components. These results are stated in the framework of i.i.d random vectors when the marginal integration estimation method is used.
Nonparametric regression models with locally stationary covariates have received increasing interest in recent years. As a nice relief of "curse of dimensionality" induced by large dimension of covariates, additive regression model is commonly used. However, in locally stationary context, to catch the dynamic nature of regression function, we adopt a flexible varying-coefficient additive model where the regression function has the form $α_{0}\left(u\right)+\sum_{k=1}^{p}α_{k}\left(u\right)β_{k}\left(x_{k}\right).$ For this model, we propose a three-step spline estimation method for each univar…
We present a new class of methods for high-dimensional nonparametric regression and classification called sparse additive models (SpAM). Our methods combine ideas from sparse linear modeling and additive nonparametric regression. We derive an algorithm for fitting the models that is practical and effective even when the number of covariates is larger than the sample size. SpAM is closely related to the COSSO model of Lin and Zhang (2006), but decouples smoothing and sparsity, enabling the use of arbitrary nonparametric smoothers. An analysis of the theoretical properties of SpAM is given. We a…
In this paper, we study the ordinary backfitting and smooth backfitting as methods of fitting additive quantile models. We show that these backfitting quantile estimators are asymptotically equivalent to the corresponding backfitting estimators of the additive components in a specially-designed additive mean regression model. This implies that the theoretical properties of the backfitting quantile estimators are not unlike those of backfitting mean regression estimators. We also assess the finite sample properties of the two backfitting quantile estimators.
In this paper, we consider an unknown functional estimation problem in a general nonparametric regression model with the feature of having both multiplicative and additive noise.We propose two new wavelet estimators in this general context. We prove that they achieve fast convergence rates under the mean integrated square error over Besov spaces. The obtained rates have the particularity of being established under weak conditions on the model. A numerical study in a context comparable to stochastic frontier estimation (with the difference that the boundary is not necessarily a production funct…
Due to the curse of dimensionality, estimation in a multidimensional nonparametric regression model is in general not feasible. Hence, additional restrictions are introduced, and the additive model takes a prominent place. The restrictions imposed can lead to serious bias. Here, a new estimator is proposed which allows penalizing the nonadditive part of a regression function. This offers a smooth choice between the full and the additive model. As a byproduct, this penalty leads to a regularization in sparse regions. If the additive model does not hold, a small penalty introduces an additional …
Let $Y\in\R^n$ be a random vector with mean $s$ and covariance matrix $σ^2P_n\tra{P_n}$ where $P_n$ is some known $n\times n$-matrix. We construct a statistical procedure to estimate $s$ as well as under moment condition on $Y$ or Gaussian hypothesis. Both cases are developed for known or unknown $σ^2$. Our approach is free from any prior assumption on $s$ and is based on non-asymptotic model selection methods. Given some linear spaces collection $\{S_m,\ m\in\M\}$, we consider, for any $m\in\M$, the least-squares estimator $\hat{s}_m$ of $s$ in $S_m$. Considering a penalty function that is no…
The method of instrumental variables provides a fundamental and practical tool for causal inference in many empirical studies where unmeasured confounding between the treatments and the outcome is present. Modern data such as the genetical genomics data from these studies are often high-dimensional. The high-dimensional linear instrumental-variables regression has been considered in the literature due to its simplicity albeit a true nonlinear relationship may exist. We propose a more data-driven approach by considering the nonparametric additive models between the instruments and the treatment…
We consider an additive regression model consisting of two components $f^0$ and $g^0$, where the first component $f^0$ is in some sense "smoother" than the second $g^0$. Smoothness is here described in terms of a semi-norm on the class of regression functions. We use a penalized least squares estimator $(\hat f, \hat g)$ of $(f^0, g^0)$ and show that the rate of convergence for $\hat f $ is faster than the rate of convergence for $\hat g$. In fact, both rates are generally as fast as in the case where one of the two components is known. The theory is illustrated by a simulation study. Our proo…
We consider a flexible semiparametric quantile regression model for analyzing high dimensional heterogeneous data. This model has several appealing features: (1) By considering different conditional quantiles, we may obtain a more complete picture of the conditional distribution of a response variable given high dimensional covariates. (2) The sparsity level is allowed to be different at different quantile levels. (3) The partially linear additive structure accommodates nonlinearity and circumvents the curse of dimensionality. (4) It is naturally robust to heavy-tailed distributions. In this p…
In this paper, we are concerned with nonparametric estimation of the multivariate regression function in the presence of right censored data. More precisely, we propose a statistic that is shown to be asymptotically normally distributed under the additive assumption, and that could be used to test for additivity in the censored regression setting.
In this paper, we observe a sparse mean vector through Gaussian noise and we aim at estimating some additive functional of the mean in the minimax sense. More precisely, we generalize the results of (Collier et al., 2017, 2019) to a very large class of functionals. The optimal minimax rate is shown to depend on the polynomial approximation rate of the marginal functional, and optimal estimators achieving this rate are built.
High-dimensional sparse modeling with censored survival data is of great practical importance, as exemplified by modern applications in high-throughput genomic data analysis and credit risk analysis. In this article, we propose a class of regularization methods for simultaneous variable selection and estimation in the additive hazards model, by combining the nonconcave penalized likelihood approach and the pseudoscore method. In a high-dimensional setting where the dimensionality can grow fast, polynomially or nonpolynomially, with the sample size, we establish the weak oracle property and ora…
The functional generalized additive model (FGAM) provides a more flexible nonlinear functional regression model than the well-studied functional linear regression model. This paper restricts attention to the FGAM with identity link and additive errors, which we will call the additive functional model, a generalization of the functional linear model. This paper studies the minimax rate of convergence of predictions from the additive functional model in the framework of reproducing kernel Hilbert space. It is shown that the optimal rate is determined by the decay rate of the eigenvalues of a spe…
