We present results from large eddy simulations (LES) of extended wind-farms for several turbine configurations with a range of different spanwise and streamwise spacing combinations. The results show that for wind-farms arranged in a staggered configuration with spanwise spacings in the range $\approx[3.5,8]$D, where $D$ is the turbine diameter, the power output in the fully developed regime depends primarily on the geometric mean of the spanwise and streamwise turbine spacings. In contrast, for the aligned configuration the power output in the fully developed regime strongly depends on the streamwise turbine spacing and shows weak dependence on the spanwise spacing. Of interest to the rate of wake recovery, we find that the power output is well correlated with the vertical kinetic energy flux, which is a measure of how much kinetic energy is transferred into the wind-turbine region by the mean flow. A comparison between the aligned and staggered configurations reveals that the vertical kinetic energy flux is more localized along turbine rows for aligned wind-farms than for staggered ones. This additional mixing leads to a relatively fast wake recovery for aligned wind-farms.
Recent large eddy simulations have led to improved parameterizations of the effective roughness height of wind farms. This effective roughness height can be used to predict the wind velocity at hub-height as function of the geometric mean of the spanwise and streamwise turbine spacings and the turbine loading factors. Meyers and Meneveau (Wind Energy 15, 305-317 (2012)) used these parameterizations to make predictions for the optimal wind turbine spacing in infinitely large wind farms. They found that for a realistic cost ratio between the turbines and the used land surface the optimal turbine…
The multi-rotor (MR) wind turbine concept can be used to upscale wind turbines without increasing the rotor diameter, which can be beneficial for transport, manufacture and design of wind turbines blades. The rotor interaction of a MR wind turbine leads to a faster wake recovery compared to an equivalent single-rotor (SR) wind turbine wake. In this article, the benefit of the faster wake recovery of MR wind turbines is quantified using Reynolds-averaged Navier-Stokes simulations of a 4x4 rectangular MR wind farm, for three different inter wind turbine spacings. The simulations predict an incre…
This paper solves an approximate form of conservation of mass and momentum for a turbine in a wind farm array. The solution is a fairly simple explicit relationship that predicts the streamwise velocity distribution within a wind farm with an arbitrary layout. As this model is obtained by solving flow governing equations directly for a turbine that is subject to upwind turbine wakes, no ad hoc superposition technique is needed to predict wind farm flows. A suite of large-eddy simulations (LES) of wind farm arrays is used to examine self-similarity as well as validity of the so-called conservat…
Turbine wake and farm blockage effects may significantly impact the power produced by large wind farms. In this study, we perform Large-Eddy Simulations (LES) of 50 infinitely large offshore wind farms with different turbine layouts and wind directions. The LES results are combined with the two-scale momentum theory (Nishino & Dunstan 2020, J. Fluid Mech. 894, A2) to investigate the aerodynamic performance of large but finite-sized farms as well. The power of infinitely large farms is found to be a strong function of the array density, whereas the power of large finite-sized farms depends on b…
Modern wind farms comprised of horizontal-axis wind turbines (HAWTs) require significant land resources to separate each wind turbine from the adjacent turbine wakes. This aerodynamic constraint limits the amount of power that can be extracted from a given wind farm footprint. The resulting inefficiency of HAWT farms is currently compensated by using taller wind turbines to access greater wind resources at high altitudes, but this solution comes at the expense of higher engineering costs and greater visual, acoustic, radar and environmental impacts. We investigated the use of counter-rotating …
An extended theoretical approach is proposed to predict the average power of wind turbines in a large finite-size wind farm. The approach is based on the two-scale momentum theory proposed recently for the modelling of ideal very large wind farms, but the theory is now generalised by introducing the effect of additional pressure difference induced by the farm between the upstream and downstream sides of the farm, making the approach applicable to real wind farms that are large but not as large as the size of the relevant atmospheric system driving the flow over the farm. To validate the genera…
A two-scale modelling approach is discussed to predict the performance and energetics of a large number (more than a few hundred) of marine turbines installed as a power farm in a general coastal environment. The kernel of this approach is that the outer, or coastal-scale, model/simulation is to assess the reduction of flow passing through a given farm area as a function of the increase of head loss across the farm, whereas the inner, or device-scale, model/simulation employs this function to account for the (otherwise unknown) effect of coastal dynamics for that farm site, i.e. diminution of …
Turbine wake and local blockage effects are known to alter wind farm power production in two different ways: (1) by changing the wind speed locally in front of each turbine; and (2) by changing the overall flow resistance in the farm and thus the so-called farm blockage effect. To better predict these effects with low computational costs, we develop data-driven emulators of the `local' or `internal' turbine thrust coefficient $C_T^*$ as a function of turbine layout. We train the model using a multi-fidelity Gaussian Process (GP) regression with a combination of low (engineering wake model) and…
A new theoretical method is presented for future multi-scale aerodynamic optimisation of very large wind farms. The new method combines a recent two-scale coupled momentum analysis of ideal wind turbine arrays with the classical blade-element-momentum (BEM) theory for turbine rotor design, making it possible to explore some potentially important relationships between the design of rotors and their performance in a very large wind farm. The details of the original two-scale momentum model are described first, followed by the new coupling procedure with the classical BEM theory and some example …
The flow speed-up generated by windbreaks can be used to increase the power production of wind turbines. However, due to the increased drag imposed by the windbreaks, their use in large wind turbine arrays has been questioned. We use large eddy simulations to show that windbreaks can increase the power production of large wind farms. A crucial finding is that windbreaks in a wind farm should be much lower than for a single turbine case. In fact, the optimal windbreak for an isolated turbine can reduce wind farm performance. The optimal windbreak height in a wind farm namely depends on the righ…
The power output of wind farms depends strongly on spatial turbine arrangement, and the resulting turbulent interactions with the atmospheric boundary layer. The main goal of this work is to study the effect of turbine layout on the power output for large wind farms approaching a fully-developed regime. For this purpose we employ an experimental setup of a scaled wind farm with one-hundred porous disk models, of which sixty are instrumented with strain gages. Our experiments cover a parametric space of fifty-six different layouts for which the turbine-area-density is constant, focusing on diff…
Co-locating horizontal- and vertical-axis wind turbines has been recently proposed as a possible approach to enhance the land-area power density of wind farms. In this work, we aim to study the benefits associated with such a co-location using large-eddy simulation (LES) and analytical wake models. In this regard, small-scale vertical-axis wind turbines (VAWTs) in triangular clusters are deployed within a finite-size wind farm consisting of horizontal-axis wind turbines (HAWTs). Wake flow within the wind farm and the effect of VAWTs on the overall wind-farm efficiency are investigated and quan…
Low-level jets (LLJs) are the wind maxima in the lowest 50 to 1000 m of atmospheric boundary layers. Due to their significant influence on the power production of wind farms it is crucial to understand the interaction between LLJs and wind farms. In the presence of an LLJ, there are positive and negative shear regions in the velocity profile. The positive shear regions of LLJs are continuously turbulent, while the negative shear regions have limited turbulence. We present large-eddy simulations of wind farms in which the LLJ is above, below, or in the middle of the turbine rotor swept area. We…
We present and test the coupled wake boundary layer (CWBL) model that describes the distribution of the power output in a wind-farm. The model couples the traditional, industry-standard wake model approach with a "top-down" model for the overall wind-farm boundary layer structure. This wake model captures the effect of turbine positioning, while the "top-down" portion of the model adds the interactions between the wind-turbine wakes and the atmospheric boundary layer. Each portion of the model requires specification of a parameter that is not known a-priori. For the wake model, the wake expans…
In large wind farms, wake distribution behind a wind turbine causes a considerable reduction of wind velocity for downstream wind turbines, resulting in a significant amount of power loss. Therefore, it is very crucial to predict wind turbine wakes efficiently. Thus, we propose a large-eddy simulation (LES) methodology, which takes the vorticity stretching to model transients in wind turbine wakes. In addition, we present an improved actuator disk model, which accounts for two-way feedback between the atmosphere and the wakes. First, we show that the vertical profile of the mean wind predicted…
We present here a computational fluid dynamics (CFD) simulation of Lillgrund offshore wind farm, which is located in the Oresund Strait between Sweden and Denmark. The simulation combines a dynamic representation of wind turbines embedded within a Large-Eddy Simulation CFD solver, and uses hr-adaptive meshing to increase or decrease mesh resolution where required. This allows the resolution of both large scale flow structures around the wind farm, and local flow conditions at individual turbines; consequently, the response of each turbine to local conditions can be modelled, as well as the res…
A new theoretical approach is proposed to predict a practical upper limit to the efficiency of a very large wind farm. The new theory suggests that the efficiency of ideal turbines in an ideal very large wind farm depends primarily on a non-dimensional parameter $λ/C_{f0}$, where $λ$ is the ratio of the rotor swept area to the land area (for each turbine) and $C_{f0}$ is a natural friction coefficient observed before constructing the farm. When $λ/C_{f0}$ approaches to zero, the new theory goes back to the classical actuator disc theory, yielding the well-known Betz limit. When $λ/C_{f0}$ incr…
Large eddy simulations of wind farms are performed to study the effects of wind turbine row alignment with respect to the incoming flow direction. Various wind farms with fixed stream-wise spacing (7.85 rotor diameters) and varying lateral displacements and span-wise turbine spacings are considered, for a fixed inflow direction. Simulations show that, contrary to common belief, a perfectly staggered (checker-board) configuration does not necessarily give the highest average power output. Instead, the highest mean wind farm power output is found to depend on several factors, the most important …
The intentional yaw misalignment of leading, upwind turbines in a wind farm, termed wake steering, has demonstrated potential as a collective control approach for wind farm power maximization. The optimal control strategy, and resulting effect of wake steering on wind farm power production, are in part dictated by the power degradation of the upwind yaw misaligned wind turbines. In the atmospheric boundary layer, the wind speed and direction may vary significantly over the wind turbine rotor area, depending on atmospheric conditions and stability, resulting in freestream turbine power producti…
Low-level jets (LLJs) are the wind maxima in the lower regions of the atmosphere with a high wind energy potential. Here we use large-eddy simulations to study the effect of LLJ height on the flow dynamics in a wind farm with $10\times4$ turbines. We change the LLJ height and atmospheric thermal stratification by varying the surface cooling rate. We find that the first row power production is higher in the presence of a LLJ compared to a neutral reference case without LLJ. Besides, we show that the first row power production increases with decreasing LLJ height. Due to the higher turbulence in…
As a generalization of the mass-flux based classical stream-tube, the concept of momentum and energy transport tubes is discussed as a flow visualization tool. These transport tubes have the property, respectively, that no fluxes of momentum or energy exist over their respective tube mantles. As an example application using data from large-eddy simulation, such tubes are visualized for the mean-flow structure of turbulent flow in large wind farms, in fully developed wind-turbine-array boundary layers. The three-dimensional organization of energy transport tubes changes considerably when turbin…
In order to enable simulations of developing wind turbine array boundary layers with highly realistic inflow conditions a concurrent precursor method for Large Eddy Simulations is proposed. In this method we consider two domains simultaneously, i.e. in one domain a turbulent Atmospheric Boundary Layer (ABL) without wind turbines is simulated in order to generate the turbulent inflow conditions for a second domain in which the wind turbines are placed. The benefit of this approach is that a) it avoids the need for large databases in which the turbulent inflow conditions are stored and the corre…
While a theoretical limit has long been established for the performance of a single turbine, no corresponding upper bound exists for the power output from a large wind farm, making it difficult to evaluate the available potential for further performance gains. Here we build a model describing the essential features of a large array of turbines with arbitrary design and layout, by considering a fully-developed wind farm whose upper edge is bounded by a self-similar boundary layer. The exchanges between the wind farm, the overlaying boundary layer, and the outer flow are parameterized by means o…
Understanding wind turbine wake mixing and recovery is critical for improving the power generation and structural stability of downwind turbines in a wind farm. In the field, where incoming flow and turbine operation are constantly changing, wake recovery can be significantly influenced by dynamic wake modulation, which has not yet been explored. Here we present the first investigation of dynamic wake modulation in the near wake of a utility-scale turbine and quantify its relationship with changing conditions. This investigation is enabled using novel super-large-scale flow visualization with …
Most wind farms consist of horizontal axis wind turbines (HAWTs) due to the high power coefficient (mechanical power output divided by the power of the free-stream air through the turbine cross-sectional area) of an isolated turbine. However when in close proximity to neighbouring turbines, HAWTs suffer from a reduced power coefficient. In contrast, previous research on vertical axis wind turbines (VAWTs) suggests that closely-spaced VAWTs may experience only small decreases (or even increases) in an individual turbine's power coefficient when placed in close proximity to neighbours, thus yiel…
Fluctuations represent a major challenge for the incorporation of electric power from large wind-farms into power grids. Wind farm power output fluctuates strongly in time, over various time scales. Understanding these fluctuations, especially their spatio-temporal characteristics, is particularly important for the design of backup power systems that must be readily available in conjunction with wind-farms. In this work we analyze the power fluctuations associated with the wind-input variability at scales between minutes to several hours, using large eddy simulations (LES) of extended wind-par…
The University of Texas at Dallas（德克萨斯大学达拉斯分校）；Argonne National Laboratory（阿贡国家实验室）
Different machine learning (ML) models are trained on SCADA and meteorological data collected at an onshore wind farm and then assessed in terms of fidelity and accuracy for predictions of wind speed, turbulence intensity, and power capture at the turbine and wind farm levels for different wind and atmospheric conditions. ML methods for data quality control and pre-processing are applied to the data set under investigation and found to outperform standard statistical methods. A hybrid model, comprised of a linear interpolation model, Gaussian process, deep neural network (DNN), and support vec…
Reducing wake losses in wind farms by deflecting the wakes through turbine yawing has been shown to be a feasible wind farm controls approach. Nonetheless, the effectiveness of yawing depends not only on the degree of wake deflection but also on the resulting shape of the wake. In this work, the deflection and morphology of wakes behind a wind turbine operating in yawed conditions are studied using wind tunnel experiments of a wind turbine modeled as a porous disk in a uniform inflow. First, by measuring velocity distributions at various downstream positions and comparing with prior studies, w…
Under the term global blockage, the cumulative induction of wind turbines in a wind farm has been recently suspected to be responsible for observed overestimations of the energy yield in large-size wind farms. In this paper, the practice of modeling this effect after linear superposition of single turbine inductions, calculated with three of the most recent analytic models, is compared to Large-Eddy-Simulations of wind farms. We compare the models across two different farms, composed of 9 and 49 turbines, with two different heights of the atmospheric boundary layer, 300 and 500 m. The results …
Numerical models of the flow and wakes due to turbines operating within a real-scale offshore wind farm can lead to a prohibitively large computational cost, particularly when considering blade-resolved simulations. With the introduction of turbine parametrizations such as the actuator disk (AD) or the actuator line (AL) models, this problem has been partially addressed, yet the computational cost associated with these simulations remains high. In this work, we present an implementation and validation of an AL model within the mesh-adaptive three-dimensional fluid dynamics solver, Fluidity, un…
Numerous studies have shown that wind turbine wakes within a large wind farm bring about changes to both the dynamics and thermodynamics of the atmospheric boundary layers (ABL). Previously, we investigated the relative humidity budget within a wind farm via field measurements in the near-wake region and large eddy simulations (LES). The effect of the compounding wakes within a large wind farm on the relative humidity was also investigated by LES. In this study, we investigate how the areas of relative humidity variation, that was observed in the near-wake, develop downstream in the shadow reg…
The efficiency of tidal-stream turbines in a large array depends on the balance between negative effects of turbine-wake interactions and positive effects of bypass-flow acceleration due to local blockage, both of which are functions of the layout of turbines. Here we investigate the hydrodynamics of turbines in an infinitely large array with aligned or staggered layouts for a range of streamwise and lateral turbine spacing. First, we present a theoretical analysis based on an extension of the Linear Momentum Actuator Disc Theory (LMADT) for perfectly aligned and staggered layouts, employing a…
We introduce a gradient-free data-driven framework for optimizing the power output of a wind farm based on a Bayesian approach and large-eddy simulations. In contrast with conventional wind farm layout optimization strategies, which make use of simple wake models, the proposed framework accounts for complex flow phenomena such as wake meandering, local speed-ups and the interaction of the wind turbines with the atmospheric flow. The capabilities of the framework are demonstrated for the case of a small wind farm consisting of five wind turbines. It is shown that it can find optimal designs wit…
As wind energy continues to expand, increased interaction between wind farms and their surroundings can be expected. Using natural snowfall to visualize the air flow in the wake of a utility-scale wind turbine at unprecedented spatio-temporal resolution, we observe intermittent periods of strong interaction between the wake and the ground surface and quantify the momentum flux during these periods. Significantly, we identify two turbine operational-dependent pathways that lead to these periods of increased wake-ground interaction. Data from a nearby meteorological tower provides further insigh…
Wind farm flow control aims to improve wind turbine performance by reducing aerodynamic wake interaction between turbines. Dynamic, physics-based models of wind farm flows have been essential for exploring control strategies such as wake redirection and dynamic induction control. Free vortex methods can provide a computationally efficient way to model wind turbine wake dynamics for control optimisation. We present a control-oriented free-vortex wake model of a 2D and 3D actuator disc to represent wind turbine wakes. The novel derivation of the discrete adjoint equations allows efficient gradie…
This paper presents a theory based on the law of momentum conservation to define and help analyse the problem of large wind farm aerodynamics. The theory splits the problem into two sub-problems; namely an 'external' (or farm-scale) problem, which is a time-dependent problem considering large-scale motions of the atmospheric boundary layer (ABL) to assess the amount of momentum available to the ABL's bottom resistance at a certain time; and an 'internal' (or turbine-scale) problem, which is a quasi-steady (in terms of large-scale motions of the ABL) problem describing the breakdown of the ABL'…
A quantitative understanding of the dominant mechanisms that govern the generation and decay of the counter-rotating vortex pair (CVP) produced by yawed wind turbines is needed to fully realize the potential of yawing for wind farm power maximization and regulation. Observations from large eddy simulations (LES) of yawed wind turbines in the turbulent atmospheric boundary layer and concepts from the airplane trailing vortex literature inform a model for the shed vorticity and circulation. The model is formed through analytical integration of simplified forms of the vorticity transport equation…
Yaw control has proven to be promising in alleviating the wake effects that plague the efficiency of wind farms. In this work, the actuator line modeling (ALM) method is adopted to simulate the flows over two tandem turbines distanced by $3 - 7$ rotor diameters, with the yaw angle of the upstream rotor varying from $γ_1=0^{\circ}$ to $50^{\circ}$. The aim is to provide a comprehensive aerodynamic characterization of a simple wind farm under yaw misalignment. With increasing yaw angle, the power generated by the downstream rotor increases, compensating the power loss in the upstream rotor, and …
At low Reynolds numbers, the wind flow in the wake of a single wind turbine is generally not turbulent. However, turbines in wind farms affect each other's wakes so that a turbulent flow can arise. In the present work, an analogue of this effect for the massless charge carrier flow around obstacles in graphene is outlined. We use a relativistic hydrodynamic simulation to analyze the flow in a sample containing impurities. Depending on the density of impurities in the sample, we indeed find evidence for potentially turbulent flow and discuss experimental consequences.
Collective wind farm flow control, where wind turbines are operated in an individually suboptimal strategy to benefit the aggregate farm, has demonstrated potential to reduce wake interactions and increase farm energy production. However, existing wake models used for flow control often estimate the thrust and power of yaw misaligned turbines using simplified empirical expressions which require expensive calibration data and do not accurately extrapolate between turbine models. The thrust, wake velocity deficit, wake deflection, and power of a yawed wind turbine depend on its induced velocity.…
