In this paper, we consider the downlink of a massive multiple-input-multiple-output (MIMO) single user transmission system operating in the millimeter wave outdoor narrowband channel environment. We propose a novel receive spatial modulation architecture aimed to reduce the power consumption at the user terminal, while attaining a significant throughput. The energy consumption reduction is obtained through the use of analog devices (amplitude detector), which reduces the number of radio frequency chains and analog-to-digital-converters (ADCs). The base station transmits spatial and modulation symbols per channel use. We show that the optimal spatial symbol detector is a threshold detector that can be implemented by using one bit ADC. We derive closed form expressions for the detection threshold at different signal-to-noise-ratio (SNR) regions showing that a simple threshold can be obtained at high SNR and its performance approaches the exact threshold. We derive expressions for the average bit error probability in the presence and absence of the threshold estimation error showing that a small number of pilot symbols is needed. A performance comparison is done between the proposed system and fully digital MIMO showing that a suitable constellation selection can reduce the performance gap.
In multiple-input multiple-output (MIMO), multiple radio frequency (RF) chains are usually required to simultaneously transmit multiple data streams. As a special MIMO technology, spatial modulation (SM) activates one transmit antenna with one RF chain and exploits the index of the active antenna for information transfer at each time slot. Recently, reconfigurable metasurfaces have emerged as a promising technology that is able to reconfigure the wireless propagation environment by altering the amplitude and/or phase of the incident signal. In this article, we aim for the implementation of sin…
The problem of efficient modulation classification (MC) in multiple-input multiple-output (MIMO) systems is considered. Per-layer likelihood-based MC is proposed by employing subspace decomposition to partially decouple the transmitted streams. When detecting the modulation type of the stream of interest, a dense constellation is assumed on all remaining streams. The proposed classifier outperforms existing MC schemes at a lower complexity cost, and can be efficiently implemented in the context of joint MC and subspace data detection.
This work considers multiple-input multiple-output (MIMO) communication systems using hierarchical modulation. A disadvantage of the maximum-likelihood (ML) MIMO detector is that computational complexity increases exponentially with the number of transmit antennas. To reduce complexity, we propose a hierarchical modulation scheme to be used in MIMO trans- mission where base and enhancement layers are incorporated. In the proposed receiver, the base layer is detected first with a minimum mean square error (MMSE) detector which is followed by ML detection of the enhancement layer. Our results in…
Spatial complementary code keying modulation (SCCKM) is proposed as a novel block coding modulation scheme. An input binary sequence is modulated based on the different lengths of complementary code keying (CCK) modulation and then spread across the transmit antennas (spatial domain) in a multiple input multiple output (MIMO) system exploiting orthogonal frequency division multiplexing (OFDM). At the receiver side, zero forcing equalization is applied to the OFDM modulated data to mitigate the effect of the multipath fast fading channel and then followed by maximum likelihood (ML) detection to…
The problem of radio resource allocation for global energy efficiency (GEE) maximization in mmWaves large-scale multiple-input multiple-output (MIMO) systems using hybrid-beamforming with spatial modulation is addressed. The theoretical properties of the optimization problem at hand are analyzed and two provably convergent optimization algorithms with affordable complexity are proposed. The former achieves the global optimum, while the latter trades off optimality with a lower computational complexity. Nevertheless, numerical results show that both algorithms attain global optimality in practi…
Generalized spatial modulation (GenSM) aided millimeter wave (mmWave) multiple-input multiple-output (MIMO) has recently received substantial academic attention. However, due to the insufficient exploitation of the transmitter's knowledge of the channel state information (CSI), the achievable rates of state-of-the-art GenSM-aided mmWave MIMO systems are far from being optimal. Against this background, a novel analog precoding scheme is proposed in this paper to improve the spectral efficiency (SE) of conventional GenSM-aided mmWave MIMOs. More specifically, we firstly manage to lower-bound the…
In this paper, we consider {\em media-based modulation (MBM)}, an attractive modulation scheme which is getting increased research attention recently, for the uplink of a massive MIMO system. Each user is equipped with one transmit antenna with multiple radio frequency (RF) mirrors (parasitic elements) placed near it. The base station (BS) is equipped with tens to hundreds of receive antennas. MBM with $m_{rf}$ RF mirrors and $n_r$ receive antennas over a multipath channel has been shown to asymptotically (as $m_{rf}\rightarrow \infty$) achieve the capacity of $n_r$ parallel AWGN channels. Thi…
Both antenna selection and spatial modulation allow for low-complexity MIMO transmitters when the number of RF chains is much lower than the number of transmit antennas. In this manuscript, we present a quantitative performance comparison between these two approaches by taking into account implementational restrictions, such as antenna switching. We consider a band-limitedMIMO system, for which the pulse shape is designed, such that the outband emission satisfies a desired spectral mask. The bit error rate is determined for this system, considering antenna selection and spatial modulation. The…
Generalized spatial modulation (GSM) uses $n_t$ transmit antenna elements but fewer transmit radio frequency (RF) chains, $n_{rf}$. Spatial modulation (SM) and spatial multiplexing are special cases of GSM with $n_{rf}=1$ and $n_{rf}=n_t$, respectively. In GSM, in addition to conveying information bits through $n_{rf}$ conventional modulation symbols (for example, QAM), the indices of the $n_{rf}$ active transmit antennas also convey information bits. In this paper, we investigate {\em GSM for large-scale multiuser MIMO communications on the uplink}. Our contributions in this paper include: ($…
Massive multi-user (MU) multiple-input multiple- output (MIMO) is widely believed to be a core technology for the upcoming fifth-generation (5G) wireless communication standards. The use of low-precision digital-to-analog converters (DACs) in MU-MIMO base stations is of interest because it reduces the power consumption, system costs, and raw baseband data rates. In this paper, we develop novel algorithms for downlink precoding in massive MU-MIMO systems with 1-bit DACs that support higher-order modulation schemes such as 8-PSK or 16-QAM. Specifically, we present low-complexity nonlinear precod…
Diversity order is an important measure for the performance of communication systems over MIMO fading channels. In this paper, we prove that in MIMO multiple access systems (or MIMO point-to-point systems with V-BLAST transmission), lattice-reduction-aided decoding achieves the maximum receive diversity (which is equal to the number of receive antennas). Also, we prove that the naive lattice decoding (which discards the out-of-region decoded points) achieves the maximum diversity.
Blind algorithms for multiple-input multiple-output (MIMO) signals interception have recently received considerable attention because of their important applications in modern civil and military communication fields. One key step in the interception process is to blindly recognize the modulation type of the MIMO signals. This can be performed by employing a Modulation Classification (MC) algorithm, which can be feature-based or likelihood-based. To overcome the problems associated with the existing likelihood-based MC algorithms, a new algorithm is developed in this paper. We formulated the MC…
Multiple-input multiple-output orthogonal frequency division multiplexing with index modulation (MIMO-OFDM-IM) is a novel multicarrier transmission technique which has been proposed recently as an alternative to classical MIMO-OFDM. In this scheme, OFDM with index modulation (OFDM-IM) concept is combined with MIMO transmission to take advantage of the benefits of these two techniques. In this paper, we shed light on the implementation and error performance analysis of the MIMO-OFDM-IM scheme for next generation 5G wireless networks. Maximum likelihood (ML), near-ML, simple minimum mean square …
The application of hybrid precoding in millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems has been proved effective for reducing the number of radio frequency (RF) chains. However, the maximum number of independent data streams is conventionally restricted by the number of RF chains, which leads to limiting the spatial multiplexing gain. To further improve the achievable spectral efficiency (SE), in this paper we propose a novel generalized spatial modulation (GenSM) aided mmWave MIMO system to convey an extra data stream via the index of the active antennas group, while no…
A modulation classification (MC) scheme based on Independent Component Analysis (ICA) in conjunction with either maximum likelihood (ML) or Support Vector Machines (SVM) is proposed for MIMO-OFDM signals over frequency selective, time varying channels. The method is blind in the sense that it is assumed that the receiver has no information about the channel and transmitted signals other than that the spatial streams of signals are statistically independent. The processing consists of separation of the MIMO streams followed by modulation classification of the separated signals. While in general…
In this paper, we investigate a multiple-input multiple-output (MIMO) system with simultaneous information detection (ID) and energy harvesting (EH) receiver. This point-to-point system operates in the vicinity of active interfering nodes. The receiver performs power splitting where a portion of received signal undergoes analog energy harvesting circuitry. Further, the information content of the other portion is extracted after performing digital beamforming. In this MIMO system, information carrier eigen-modes are not necessarily the eigen-modes with the strongest energy level. Hence, it is b…
Orthogonal frequency division multiplexing with index modulation (OFDM-IM) is a novel multicarrier transmission technique which has been proposed as an alternative to classical OFDM. The main idea of OFDM-IM is the use of the indices of the active subcarriers in an OFDM system as an additional source of information. In this work, we propose multiple-input multiple-output OFDM-IM (MIMO-OFDM-IM) scheme by combining OFDM-IM and MIMO transmission techniques. The low complexity transceiver structure of the MIMO-OFDM-IM scheme is developed and it is shown via computer simulations that the proposed M…
In a recent work, a capacity-achieving scheme for the common-message two-user MIMO broadcast channel, based on single-stream coding and decoding, was described. This was obtained via a novel joint unitary triangularization which is applied to the corresponding channel matrices. In this work, the triangularization is generalized, to any (finite) number of matrices, allowing multi-user applications. To that end, multiple channel uses are jointly treated, in a manner reminiscent of space-time coding. As opposed to the two-user case, in the general case there does not always exist a perfect (capac…
This paper proposes spatial lattice modulation (SLM), a spatial modulation method for multipleinput-multiple-output (MIMO) systems. The key idea of SLM is to jointly exploit spatial, in-phase, and quadrature dimensions to modulate information bits into a multi-dimensional signal set that consists oflattice points. One major finding is that SLM achieves a higher spectral efficiency than the existing spatial modulation and spatial multiplexing methods for the MIMO channel under the constraint ofM-ary pulseamplitude-modulation (PAM) input signaling per dimension. In particular, it is shown that w…
This paper investigates the bit-interleaved coded generalized spatial modulation (BICGSM) with iterative decoding (BICGSM-ID) for multiple-input multiple-output (MIMO) visible light communications (VLC). In the BICGSM-ID scheme, the information bits conveyed by the signal-domain (SiD) symbols and the spatial-domain (SpD) light emitting diode (LED)-index patterns are coded by a protograph low-density parity-check (P-LDPC) code. Specifically, we propose a signal-domain symbol expanding and re-allocating (SSER) method for constructing a type of novel generalized spatial modulation (GSM) constella…
The Golden space-time trellis coded modulation (GST-TCM) scheme was proposed in \cite{Hong06} for a high rate $2\times 2$ multiple-input multiple-output (MIMO) system over slow fading channels. In this letter, we present the performance analysis of GST-TCM over block fading channels, where the channel matrix is constant over a fraction of the codeword length and varies from one fraction to another, independently. In practice, it is not useful to design such codes for specific block fading channel parameters and a robust solution is preferable. We then show both analytically and by simulation t…
The cost of radio frequency (RF) chains is the biggest drawback of massive MIMO millimeter wave networks. By employing spatial modulation (SM), it is possible to implement lower number of RF chains than transmit antennas but still achieve high spectral efficiency. In this work, we propose a system model of the SM scheme together with hybrid beamforming at the transmitter and digital combining at the receiver. In the proposed model, spatially-modulated bits are mapped onto indices of antenna arrays. It is shown that the proposed model achieves approximately 5dB gain over classical multi-user SM…
Due to the high cost and low energy efficiency of the dedicated radio frequency (RF) chains, the number of RF chains in a millimeter wave (mmWave) multiple-input multiple-output (MIMO) system is usually limited from a practical point of view. In this case, the maximum number of independent data streams is also restricted by the number of RF chains, which consequently leads to limiting the potentially attainable spatial multiplexing gain. In order to address this issue, in this paper, a novel generalized spatial modulation (GenSM) aided mmWave MIMO system is proposed, which enables the transmis…
We consider a multi-user multiple-input multiple-output (MU-MIMO) system that uses orthogonal frequency division multiplexing (OFDM). Several receivers are developed for data detection of MU-MIMO transmissions where two users share the same OFDM time and frequency resources. The receivers have partial state information about the MU-MIMO transmission with each receiver having knowledge of the MU-MIMO channel, however the modulation constellation of the co-scheduled user is unknown. We propose a joint maximum likelihood (ML) modulation classification of the co-scheduled user and data detection r…
In this paper we investigate the achievable rate of LOS MIMO systems that use 1-bit quantization and spatial oversampling at the receiver. We propose that by using additional antennas at the receiver, the loss incurred due to the strong limitation of the quantization can be decreased. Mutual information results show that considerable rate gains can be achieved depending on the number and arrangement of the antennas. In some of the cases, even the full available rate from the transmitter can be attained. Furthermore, the results also reveal that two-dimensional antenna arrays can benefit more f…
MIMO systems are considered as most promising for wireless communications. However, with an increasing number of radio front ends the corresponding energy consumption and costs become an issue, which can be relieved by the utilization of low-resolution quantizers. In this study we propose an optimal precoding algorithm constrained to constant envelope signals and phase quantization that maximizes the minimum distance to the decision threshold at the receivers using a branch-and-bound strategy. The proposed algorithm is superior to the existing methods in terms of bit error rate. Numerical resu…
We design jamming resistant receivers to enhance the robustness of a massive MIMO uplink channel against jamming. In the pilot phase, we estimate not only the desired channel, but also the jamming channel by exploiting purposely unused pilot sequences. The jamming channel estimate is used to construct the linear receive filter to reduce impact that jamming has on the achievable rates. The performance of the proposed scheme is analytically and numerically evaluated. These results show that the proposed scheme greatly improves the rates, as compared to conventional receivers. Moreover, the propo…
In this paper, delay constrained performance of a multiple-input multiple-output (MIMO) communication system in a dense environment with co-channel interference is investigated. We apply orthogonal space-time block coding (OSTBC) at the transmitter, and for alleviating the high complexity and cost of the MIMO system, receive antenna selection (RAS) scheme is employed in the downlink. Here, for simple and cheap mobile handsets, one antenna is chosen at the receiver in each utilization of the channel. Under these assumptions, a maximum constant arrival rate with the delay quality-of-service (QoS…
Low-resolution precoding techniques have gained considerable attention in the wireless communications area recently. Vital but hardly discussed in literature, discrete precoding in conjunction with channel coding is the subject of this study. Unlike prior studies, we propose three different soft detection methods and an iterative detection and decoding scheme that allow the utilization of channel coding in conjunction with low-resolution precoding. Besides an exact approach for computing the extrinsic information, we propose two approximations with reduced computational complexity. Numerical r…
We provide a performance evaluation of orthogonal time frequency space (OTFS) modulation in cell-free massive MIMO (multiple-input multiple-output) systems. By leveraging the inherent sparsity of the delay-Doppler (DD) representation of time-varying channels, we apply the embedded pilot-aided channel estimation method with reduced guard intervals and derive the minimum mean-square error estimate of the channel gains from received uplink pilots at the access points (APs). Each AP applies conjugate beamforming to transmit data to the users. We derive a closed-form expression for the individual u…
Limited-backhaul cell-free Massive multiple-input multiple-output (MIMO), in which the fog radio access network (F-RAN) is implemented to exchange the information between access points (APs) and the central processing unit (CPU), is investigated. We introduce a novel approach where the APs estimate the channel and send back the quantized version of the estimated channel and the quantized version of the received signal to the central processing unit. The Max algorithm and the Bussgang theorem are exploited to model the optimum uniform quantization. The ergodic achievable rates are derived. We s…
Massive MIMO, a candidate for 5G technology, promises significant gains in wireless data rates and link reliability by using large numbers of antennas (more than 64) at the base transceiver station (BTS). Extra antennas help by focusing the transmission and reception of signal energy into ever-smaller regions of space. This brings huge improvements in throughput. However, it requires a large number of Radio Frequency (RF) chains (usually equal to number of transmit antennas), which is a major drawback. One approach to overcome these issues is to use Spatial Modulation (SM). In SM, an index of …
Flat-fading channel models are usually invoked for analyzing the performance of massive spatial modulation multiple-input multiple-output (SM-MIMO) systems. However, in the context of broadband SM transmission, the severe inter-symbol-interference (ISI) caused by the frequency-selective fading channels can not be ignored, which leads to very detrimental effects on the achievable system performance, especially for single-carrier SM (SC-SM) transmission schemes. To the best of the author's knowledge, none of the previous researchers have been able to provide a thorough analysis on the achievable…
It is shown that while the mutual information curves for coded modulation (CM) and bit interleaved coded modulation (BICM) overlap in the case of a single input single output channel, the same is not true in multiple input multiple output (MIMO) channels. A method for mitigating fading in the presence of multiple transmit antennas, named coordinate interleaving (CI), is presented as a generalization of component interleaving for a single transmit antenna. The extent of any advantages of CI over BICM, relative to CM, is analyzed from a mutual information perspective; the analysis is based on an…
Massive spatial modulation aided multiple-input multiple-output (SM-MIMO) systems have recently been proposed as a novel combination of spatial modulation (SM) and of conventional massive MIMO, where the base station (BS) is equipped with a large number of antennas and simultaneously serves multiple user equipment (UE) that employ SM for their uplink transmission. Since the massive SM-MIMO concept combines the benefits of both the SM and massive MIMO techniques, it has recently attracted substantial research interest. In this paper, we study the achievable uplink spectral efficiency (SE) of a …
Semi-definite relaxation (SDR) detector has been demonstrated to be successful in approaching maximum likelihood (ML) performance while the time complexity is only polynomial. We propose a new receiver jointly utilizing the forward error correction (FEC) code information in the SDR detection process. Strengthened by the code constraints, the joint SDR detector provides soft information of much improved reliability to downstream decoder and therefore outperforms existing receivers with substantial gain.
In this paper, we introduce the novel use of linear spatial precoding based on fixed and known parameters of multiple-input multiple-output (MIMO) channels to improve the performance of space-time coded MIMO systems. We derive linear spatial precoding schemes for both coherent (channel is known at the receiver) and non-coherent (channel is un-known at the receiver) space-time coded MIMO systems. Antenna spacing and antenna placement (geometry) are considered as fixed parameters of MIMO channels, which are readily known at the transmitter. These precoding schemes exploit the antenna placement i…
The space-time bit-interleaved coded modulation (ST-BICM) is an efficient technique to obtain high diversity and coding gain on a block-fading MIMO channel. Its maximum-likelihood (ML) performance is computed under ideal interleaving conditions, which enables a global optimization taking into account channel coding. Thanks to a diversity upperbound derived from the Singleton bound, an appropriate choice of the time dimension of the space-time coding is possible, which maximizes diversity while minimizing complexity. Based on the analysis, an optimized interleaver and a set of linear precoders,…
We study the performance of uplink transmission in a large-scale (massive) MIMO system, where all the transmitters have single antennas and the receiver (base station) has a large number of antennas. Specifically, we analyze achievable degrees of freedom of the system without assuming channel state information at the receiver. Also, we quantify the amount of power saving that is possible with increasing number of receive antennas.
A joint robust transmit/receive adaptive beamforming for multiple-input multipleoutput (MIMO) radar based on probability-constrained optimization approach is developed in the case of Gaussian and arbitrary distributed mismatch present in both the transmit and receive signal steering vectors. A tight lower bound of the probability constraint is also derived by using duality theory. The formulated probability-constrained robust beamforming problem is nonconvex and NP-hard. However, we reformulate its cost function into a bi-quadratic function while the probability constraint splits into transmit…
Cell-Free Massive MIMO comprises a large number of distributed single-antenna access points (APs) serving a much smaller number of users. There is no partitioning into cells and each user is served by all APs. In this paper, the uplink performance of cell-free systems with minimum mean squared error (MMSE) and large scale fading decoding (LSFD) receivers is investigated. The main idea of LSFD receiver is to maximize achievable throughput using only large scale fading coefficients between APs and users. Capacity lower bounds for MMSE and LSFD receivers are derived. An asymptotic approximation f…
This letter introduces an analytical model that gives the asymptotic cumulative number of molecules absorbed by spherical receivers in a diffusive multiple-input multiple-output (MIMO) molecular communication (MC) system with pointwise transmitters. In the proposed model, the reciprocal effect among the fully absorbing (FA) receivers is described by using the concept of fictitious pointwise negative source of molecules, the best position of which for each spherical receiver being defined by its absorption barycenter. We show that there is an agreement between the proposed asymptotic model and …
Orthogonal Time Frequency Space (OTFS) is a novel modulation scheme designed in the Doppler-delay domain to fully exploit time and frequency diversity of general time-varying channels. In this paper, we present a novel discrete-time analysis of OFDM-based OTFS transceiver with a concise and vectorized input-output relationship that clearly characterizes the contribution of each underlying signal processing block in such systems. When adopting cyclic prefix in the time domain, our analysis reveals that the proposed MIMO OTFS and OFDM systems have the same ergodic capacity despite the well-known…
We consider interference alignment (IA) over K-user Gaussian MIMO interference channel (MIMO-IC) when the SNR is not asymptotically high. We introduce a generalization of IA which enables receive diversity inside the interference-free subspace. We generalize the existence criterion of an IA solution proposed by Yetis et al. to this case, thereby establishing a multi-user diversity-multiplexing trade-off (DMT) for the interference channel. Furthermore, we derive a closed-form tight lower-bound for the ergodic mutual information achievable using IA over a Gaussian MIMO-IC with Gaussian i.i.d. ch…
We design a jamming-resistant receiver scheme to enhance the robustness of a massive MIMO uplink system against jamming. We assume that a jammer attacks the system both in the pilot and data transmission phases. The key feature of the proposed scheme is that, in the pilot phase, we estimate not only the legitimate channel, but also the jamming channel by exploiting a purposely unused pilot sequence. The jamming channel estimate is used to constructed linear receive filters that reject the impact of the jamming signal. The performance of the proposed scheme is analytically evaluated using asymp…
This paper investigates the achievable sum rate of multiple-input multiple-output (MIMO) wireless systems employing linear minimum mean-squared error (MMSE) receivers. We present a new analytic framework which unveils an interesting connection between the achievable sum rate with MMSE receivers and the ergodic mutual information achieved with optimal receivers. This simple but powerful result enables the vast prior literature on ergodic MIMO mutual information to be directly applied to the analysis of MMSE receivers. The framework is particularized to various Rayleigh and Rician channel scenar…
An adaptive joint power allocation (JPA) and linear receiver design algorithm using the minimum bit error rate (MBER) criterion for a cooperative Multiple-Input Multiple-Output (MIMO) network is proposed. The system employs multiple relays with Distributed Space-Time Coding (DSTC) schemes and an Amplify-and-Forward (AF) strategy. It is designed according to a joint constrained optimization algorithm to determine the MBER power allocation parameters and the receive filter parameters for each transmitted symbol. The simulation results indicate that the proposed algorithm obtains performance gain…
In this work, we propose a novel adaptive reduced-rank strategy based on joint interpolation, decimation and filtering (JIDF) for large multiuser multiple-input multiple-output (MIMO) systems. In this scheme, a reduced-rank framework is proposed for linear receive processing and multiuser interference suppression according to the minimization of the bit error rate (BER) cost function. We present a structure with multiple processing branches that performs dimensionality reduction, where each branch contains a group of jointly optimized interpolation and decimation units, followed by a linear re…
This letter presents a comprehensive framework analyzing the asymptotic error performance of a multiple-input-multiple-output (MIMO) wireless system employing spatial modulation (SM) with maximum likelihood detection and perfect channel state information. Generic analytical expressions for the diversity and coding gains are deduced that reveal fundamental properties of MIMO SM systems. The presented analysis can be used to obtain closed-form upper bounds for the average bit error probability (ABEP) of MIMO SM systems under generalized fading which become asymptotically tight in the high signal…
The Internet of Things (IoT) could enable the development of cloud multiple-input multiple-output (MIMO) systems where internet-enabled devices can work as distributed transmission/reception entities. We expect that spatial multiplexing with distributed reception using cloud MIMO would be a key factor of future wireless communication systems. In this paper, we first review practical receivers for distributed reception of spatially multiplexed transmit data where the fusion center relies on quantized received signals conveyed from geographically separated receive nodes. Using the structures of …
In this paper, a joint power allocation algorithm with minimum mean-squared error (MMSE) receiver for a cooperative Multiple-Input and Multiple-Output (MIMO) network which employs multiple relays and a Decode-and-Forward (DF) strategy is proposed. A Distributed Space-Time Coding (DSTC) scheme is applied in each relay node. We present a joint constrained optimization algorithm to determine the power allocation parameters and the MMSE receive filter parameter vectors for each transmitted symbol in each link, as well as the channel coefficients matrix. A Stochastic Gradient (SG) algorithm is deri…
This paper presents the first network-coded multiple access (NCMA) system prototype operated on high-order modulations up to 16-QAM. NCMA jointly exploits physical-layer network coding (PNC) and multiuser decoding (MUD) to boost throughput of multipacket reception systems. Direct generalization of the existing NCMA decoding algorithm, originally designed for BPSK, to high-order modulations, will lead to huge performance degradation. The throughput degradation is caused by the relative phase offset between received signals from different nodes. To circumvent the phase offset problem, this paper…
In this paper, we study the performance of space modulation for Multiple-Input-Multiple-Output (MIMO) wireless systems with imperfect channel knowledge at the receiver. We focus our attention on two transmission technologies, which are the building blocks of space modulation: i) Space Shift Keying (SSK) modulation; and ii) Time-Orthogonal-Signal-Design (TOSD-) SSK modulation, which is an improved version of SSK modulation providing transmit-diversity. We develop a single-integral closed-form analytical framework to compute the Average Bit Error Probability (ABEP) of a mismatched detector for b…
In this paper, the pilot signal design for massive MIMO systems to maximize the training-based received signal-to-noise ratio (SNR) is considered under two channel models: block Gauss-Markov and block independent and identically distributed (i.i.d.) channel models. First, it is shown that under the block Gauss-Markov channel model, the optimal pilot design problem reduces to a semi-definite programming (SDP) problem, which can be solved numerically by a standard convex optimization tool. Second, under the block i.i.d. channel model, an optimal solution is obtained in closed form. Numerical res…
This letter presents a novel detection strategy for Spatially-Multiplexed Generalized Spatial Modulation systems. It is a multi-stage detection that produces a list of candidates of the transmitted signal vector, sorted according to the proximity of the data vector to one of the possible vector subspaces. The quality metric and list-length metric selects the best candidate and manages the list length, respectively. Performance results show that it significantly reduces the performance gap to the optimal maximum likelihood detector, while maintaining significant computational cost reduction.
This paper proposes a joint transmitter-receiver design to minimize the weighted sum power under the post-processing signal-to-interference-and-noise ratio (post-SINR) constraints for all subchannels. Simulation results demonstrate that the algorithm can not only satisfy the post-SINR constraints but also easily adjust the power distribution among the users by changing the weights accordingly. Hence the algorithm can be used to alleviates the adjacent cell interference by reducing the transmitting power to the edge users without performance penalty.
In this paper, we address the message-passing receiver design for the 3D massive MIMO-OFDM systems. With the aid of the central limit argument and Taylor-series approximation, a computationally efficient receiver that performs joint channel estimation and decoding is devised by the framework of expectation propagation. Specially, the local belief defined at the channel transition function is expanded up to the second order with Wirtinger calculus, to transform the messages sent by the channel transition function to a tractable form. As a result, the channel impulse response (CIR) between each …
In this paper, we investigate the capacity of massive multiple-input multiple-output (MIMO) systems corrupted by complex-valued additive white Gaussian noise (AWGN) when both the transmitter and the receiver employ 1-bit digital-to-analog converters (DACs) and 1-bit analog-to-digital-converters (ADCs). As a result of 1-bit DACs and ADCs, the transmitted and received symbols, as well as the transmit- and receive-side channel state information (CSI), are assumed to be quantized to 1-bit of information. The derived results show that the capacity of the considered massive MIMO system is $2N$ and $…
This paper presents results on the achievable spectral efficiency and on the energy efficiency for a wireless multiple-input-multiple-output (MIMO) link operating at millimeter wave frequencies (mmWave) in a typical 5G scenario. Two different single-carrier modem schemes are considered, i.e., a traditional modulation scheme with linear equalization at the receiver, and a single-carrier modulation with cyclic prefix, frequency-domain equalization and FFT-based processing at the receiver; these two schemes are compared with a conventional MIMO-OFDM transceiver structure. Our analysis jointly tak…
