arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1503.03997cs.ITmath.IT
收藏

大规模多用户MIMO系统中的广义空间调制

Generalized Spatial Modulation in Large-Scale Multiuser MIMO Systems

T. Lakshmi Narasimhan, P. Raviteja, A. Chockalingam

摘要:

通用空间调制(GSM)使用$n_t$发射天线元件,但使用较少的发射射频(RF)链$n_{rf}$。空间调制(SM)和空间复用分别是具有$n_{rf}=1$和$n_{rf}=n_t$的GSM的特殊情况。在GSM中,除了通过$n_{rf}$常规调制符号(例如,QAM)传送信息比特之外,$n_{rf}$活动发射天线的索引也传送信息比特。在本文中,我们研究{ \em GSM的大规模多用户MIMO通信的上行链路}。我们在本文中的贡献包括:($i$)的平均误比特概率(ABEP)分析的最大似然检测在多用户GSM-MIMO的上行链路上,我们推导出的ABEP上界,和($ii$)低复杂度的算法GSM-MIMO信号检测和信道估计在基站接收端的消息传递的基础上。ABEP上的分析上限被发现是紧在中等到高的信噪比(SNR)。所提出的接收机算法被发现规模非常好的复杂性,同时实现近最佳的性能在大尺寸。仿真结果表明,在相同的频谱效率下,多用户GSM-MIMO系统在出错率为$10^{-3}$的情况下,性能优于多用户SM-MIMO系统和传统多用户MIMO系统2 ~ 9 dB。与SM-MIMO和常规MIMO相比,GSM-MIMO中的这种SNR增益可以归因于以下事实:由于空间索引比特的数量较大,GSM-MIMO可以使用功率效率更高的低阶QAM字母表。

英文摘要:

Generalized spatial modulation (GSM) uses $n_t$ transmit antenna elements but fewer transmit radio frequency (RF) chains, $n_{rf}$. Spatial modulation (SM) and spatial multiplexing are special cases of GSM with $n_{rf}=1$ and $n_{rf}=n_t$, respectively. In GSM, in addition to conveying information bits through $n_{rf}$ conventional modulation symbols (for example, QAM), the indices of the $n_{rf}$ active transmit antennas also convey information bits. In this paper, we investigate {\em GSM for large-scale multiuser MIMO communications on the uplink}. Our contributions in this paper include: ($i$) an average bit error probability (ABEP) analysis for maximum-likelihood detection in multiuser GSM-MIMO on the uplink, where we derive an upper bound on the ABEP, and ($ii$) low-complexity algorithms for GSM-MIMO signal detection and channel estimation at the base station receiver based on message passing. The analytical upper bounds on the ABEP are found to be tight at moderate to high signal-to-noise ratios (SNR). The proposed receiver algorithms are found to scale very well in complexity while achieving near-optimal performance in large dimensions. Simulation results show that, for the same spectral efficiency, multiuser GSM-MIMO can outperform multiuser SM-MIMO as well as conventional multiuser MIMO, by about 2 to 9 dB at a bit error rate of $10^{-3}$. Such SNR gains in GSM-MIMO compared to SM-MIMO and conventional MIMO can be attributed to the fact that, because of a larger number of spatial index bits, GSM-MIMO can use a lower-order QAM alphabet which is more power efficient.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑