Location-aided beam alignment has been proposed recently as a potential approach for fast link establishment in millimeter wave (mmWave) massive MIMO (mMIMO) communications. However, due to mobility and other imperfections in the estimation process, the spatial information obtained at the base station (BS) and the user (UE) is likely to be noisy, degrading beam alignment performance. In this paper, we introduce a robust beam alignment framework in order to exhibit resilience with respect to this problem. We first recast beam alignment as a decentralized coordination problem where BS and UE seek coordination on the basis of correlated yet individual position information. We formulate the optimum beam alignment solution as the solution of a Bayesian team decision problem. We then propose a suite of algorithms to approach optimality with reduced complexity. The effectiveness of the robust beam alignment procedure, compared with classical designs, is then verified on simulation settings with varying location information accuracies.
Generalized spatial modulation (GenSM) aided millimeter wave (mmWave) multiple-input multiple-output (MIMO) has recently received substantial academic attention. However, due to the insufficient exploitation of the transmitter's knowledge of the channel state information (CSI), the achievable rates of state-of-the-art GenSM-aided mmWave MIMO systems are far from being optimal. Against this background, a novel analog precoding scheme is proposed in this paper to improve the spectral efficiency (SE) of conventional GenSM-aided mmWave MIMOs. More specifically, we firstly manage to lower-bound the…
We consider channel/subspace tracking systems for temporally correlated millimeter wave (e.g., E-band) multiple-input multiple-output (MIMO) channels. Our focus is given to the tracking algorithm in the non-line-of-sight (NLoS) environment, where the transmitter and the receiver are equipped with hybrid analog/digital precoder and combiner, respectively. In the absence of straightforward time-correlated channel model in the millimeter wave MIMO literature, we present a temporal MIMO channel evolution model for NLoS millimeter wave scenarios. Considering that conventional MIMO channel tracking …
This paper exploits the potential of physical layer security in massive multiple-input multiple-output (MIMO) aided two-tier heterogeneous networks (HetNets). We focus on the downlink secure transmission in the presence of multiple eavesdroppers. We first address the impact of massive MIMO on the maximum receive power based user association. We then derive the tractable upper bound expressions for the secrecy outage probability of a HetNets user.We show that the implementation of massive MIMO significantly improves the secrecy performance, which indicates that physical layer security could be …
Beamforming is indispensable in the operation of 60-GHz millimeter-wave directional multi-gigabit Wi-Fi. Simple power method and its extensions enable the transmitting and receiving antenna arrays to form a beam for single spatial stream. To further improve the spectral efficiency in future 60-GHz directional Wi-Fi, alternating least square (ALS) algorithm can form multiple beams between the transmitter and receiver for multi-input-multi-output (MIMO) operations. For both shared and split MIMO architecture, the ALS beamforming algorithm can be operated in both frequency-flat and frequency-sele…
Millimeter-wave links are of a line-of-sight nature. Hence, multiple-input multiple-output (MIMO) systems operating in the millimeter-wave band may not achieve full spatial diversity or multiplexing. In this paper, we utilize reconfigurable antennas and the high antenna directivity in the millimeter-wave band to propose a rate-two space coding design for 2x2 MIMO systems. The proposed scheme can be decoded with a low complexity maximum-likelihood detector at the receiver and yet it can enhance the bit-error-rate performance of millimeter-wave systems compared to traditional spatial multiplexin…
This paper explores the potential of wireless power transfer (WPT) in massive multiple input multiple output (MIMO) aided heterogeneous networks (HetNets), where massive MIMO is applied in the macrocells, and users aim to harvest as much energy as possible and reduce the uplink path loss for enhancing their information transfer. By addressing the impact of massive MIMO on the user association, we compare and analyze two user association schemes. We adopt the linear maximal ratio transmission beam-forming for massive MIMO power transfer to recharge users. By deriving new statistical properties,…
Low-complexity precoding {algorithms} are proposed in this work to reduce the computational complexity and improve the performance of regularized block diagonalization (RBD) {based} precoding {schemes} for large multi-user {MIMO} (MU-MIMO) systems. The proposed algorithms are based on a channel inversion technique, QR decompositions{,} and lattice reductions to decouple the MU-MIMO channel into equivalent SU-MIMO channels. Simulation results show that the proposed precoding algorithms can achieve almost the same sum-rate performance as RBD precoding, substantial bit error rate (BER) performanc…
Multiple-input multiple-output (MIMO) systems have been widely acclaimed in order to provide high data rates. Recently Lattice Reduction (LR) aided detectors have been proposed to achieve near Maximum Likelihood (ML) performance with low complexity. In this paper, we develop the fixed point design of an iterative soft decision based LR-aided K-best decoder, which reduces the complexity of existing sphere decoder. A simulation based word-length optimization is presented for physical implementation of the K-best decoder. Simulations show that the fixed point result of 16 bit precision can keep b…
Millimeter Wave (mmWave) band provides a large spectrum to meet the high-demand capacity by the 5th generation (5G) wireless networks. However, to fully exploit the available spectrum, obstacles such as high path loss, channel sparsity, and hardware complexity should be overcome. To this end, the present paper aims to design a new multiple-input multiple-output (MIMO) system using lens-based multi-beam reconfigurable antennas. The proposed MIMO system uses complete lens at the transmitter and incomplete lens at the receiver. To reduce hardware complexity, we utilize an optimal beam selection t…
In this paper we present measurement results for pure line-of-sight MIMO links operating in the millimeter wave range. We show that the estimated condition numbers and capacities of the measured channels are in good agreement with the theory for various transmission distances and antenna setups. Furthermore, the results show that orthogonal channel vectors can be observed if the spacing criterion is fulfilled, thus facilitating spatial multiplexing and achieving high spectral efficiencies even over fairly long distances. Spacings generating ill-conditioned channel matrices show on the other ha…
Lattice reduction (LR) aided multiple-input-multiple-out (MIMO) linear detection can achieve the maximum receive diversity of the maximum likelihood detection (MLD). By emloying the most commonly used Lenstra, Lenstra, and L. Lovasz (LLL) algorithm, an equivalent channel matrix which is shorter and nearly orthogonal is obtained. And thus the noise enhancement is greatly reduced by employing the LR-aided detection. One problem is that the LLL algorithm can not guarantee to find the optimal basis. The optimal lattice basis can be found by the Korkin and Zolotarev (KZ) reduction. However, the KZ …
This letter investigates the secure communication in a reconfigurable intelligent surface (RIS)-aided multiuser massive multiple-input multiple-output (MIMO) system exploiting artificial noise (AN). We first derive a closed-form expression of the ergodic secrecy rate under spatially correlated MIMO channels. By using this derived result, we further optimize the power fraction of AN in closed form and the RIS phase shifts by developing a gradient-based algorithm, which requires only statistical channel state information (CSI). Our analysis shows that spatial correlation at the RIS provides an a…
In this paper, we address the problem of optimal power allocation at the relay in two-hop secure communications under practical conditions. To guarantee secure communication during the long-distance transmission, the massive MIMO (M-MIMO) relaying techniques are explored to significantly enhance wireless security. The focus of this paper is on the analysis and design of optimal power assignment for a decode-and-forward (DF) M-MIMO relay, so as to maximize the secrecy outage capacity and minimize the interception probability, respectively. Our study reveals the condition for a nonnegative the s…
Intelligent reflecting surfaces (IRSs) enable multiple-input multiple-output (MIMO) transmitters to modify the communication channels between the transmitters and receivers. In the presence of eavesdropping terminals, this degree of freedom can be used to effectively suppress the information leakage towards such malicious terminals. This leads to significant potential secrecy gains in IRS-aided MIMO systems. This work exploits these gains via a tractable joint design of downlink beamformers and IRS phase-shifts. In this respect, we consider a generic IRS-aided MIMO wiretap setting and invoke f…
Finite resolution analog beamforming (FRAB) has been recognized as an effective approach to reduce hardware costs in massive multiple-input multiple-output (MIMO) and millimeter-wave networks. However, the use of FRAB means that the beamformers are not perfectly aligned with the users' channels and multiple users may be assigned similar or even identifical beamformers. This letter shows how non-orthogonal multiple access (NOMA) can be used to exploit this feature of FRAB, where a single FRAB based beamformer is shared by multiple users. Both analytical and simulation results are provided to de…
This work is devoted to solve the problem of estimating the carrier frequency offset, phase offset, amplitude, and SNR between two mmWave transceivers. The Cramér-Rao Lower Bound (CRLB) for the different parameters is provided first, as well as the condition for the CRLB to exist, known as Regularity Condition. Thereafter, the problem of finding suitable estimators for the parameters is adressed, for which the proposed solution is the Maximum Likelihood estimator (ML).
In order to meet the demands of future innovative applications, many efforts have been made to exceed the limits predicted by Shannon's Theory. Besides the investigation of beyond-Shannon metrics such as security, latency, and semantics, another direction is to jointly design the transceiver and the environment by utilizing the intelligent reflecting surface (IRS). In this paper, we consider the analysis and design of IRS-aided multiple-input multiple-output (MIMO) secure communications, which has attracted much research attention but still in its infancy. For example, despite their importance…
In future sixth-generation (6G) mobile networks, the Internet-of-Everything (IoE) is expected to provide extremely massive connectivity for small battery-powered devices. Indeed, massive devices with limited energy storage capacity impose persistent energy demand hindering the lifetime of communication networks. As a remedy, wireless energy transfer (WET) is a key technology to address these critical energy supply issues. On the other hand, cell-free (CF) massive multiple-input multiple-output (MIMO) systems offer an efficient network architecture to realize the roll-out of the IoE. In this ar…
Nowadays, millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems is a favorable candidate for the fifth generation (5G) cellular systems. However, a key challenge is the high power consumption imposed by its numerous radio frequency (RF) chains, which may be mitigated by opting for low-resolution analog-to-digital converters (ADCs), whilst tolerating a moderate performance loss. In this article, we discuss several important issues based on the most recent research on mmWave massive MIMO systems relying on low-resolution ADCs. We discuss the key transceiver design challe…
In this paper, we propose a novel joint caching and massive multiple-input multiple-output (MIMO) transmission scheme, referred to as \emph{cache-aided massive MIMO}, for multi-cell downlink transmission to multiple cache-enabled receivers. With the proposed scheme, users who have cached (a portion of) the files that they request are offloaded and, hence, (partially) inactive during downlink transmission. The other users either benefit from the cache-enabled offloading for mitigating pilot contamination or exploit the cached but unrequested files to cancel interference during uplink channel es…
The performance of millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems is limited by the sparse nature of propagation channels and the restricted number of radio frequency (RF) chains at transceivers. The introduction of reconfigurable antennas offers an additional degree of freedom on designing mmWave MIMO systems. This paper provides a theoretical framework for studying the mmWave MIMO with reconfigurable antennas. Based on the virtual channel model, we present an architecture of reconfigurable mmWave MIMO with beamspace hybrid analog-digital beamformers and reconfigurable…
Due to the high cost and low energy efficiency of the dedicated radio frequency (RF) chains, the number of RF chains in a millimeter wave (mmWave) multiple-input multiple-output (MIMO) system is usually limited from a practical point of view. In this case, the maximum number of independent data streams is also restricted by the number of RF chains, which consequently leads to limiting the potentially attainable spatial multiplexing gain. In order to address this issue, in this paper, a novel generalized spatial modulation (GenSM) aided mmWave MIMO system is proposed, which enables the transmis…
In this letter, we investigate the energy efficiency (EE) problem in a millimeter wave (mmWave) massive MIMO (mMIMO) system with non-orthogonal multiple access (NOMA). Multiple two-user clusters are formulated according to their channel correlation and gain difference. Following this, we propose a hybrid analog/digital precoding scheme for the low radio frequency (RF) chains structure at the base station (BS). On this basis, we formulate a power allocation problem aiming to maximize the EE under users' quality of service (QoS) requirements and per-cluster power constraint. An iterative algorit…
The main difficulty concerning optimizing the mutual information (MI) in reconfigurable intelligent surface (RIS)-aided communication systems with discrete signaling is the inability to formulate this optimization problem in an analytically tractable manner. Therefore, we propose to use the cutoff rate (CR) as a more tractable metric for optimizing the MI and introduce two optimization methods to maximize the CR, assuming perfect knowledge of the channel state information (CSI). The first method is based on the projected gradient method (PGM), while the second method is derived from the princi…
This paper proposes the use of subspace tracking algorithms for performing MIMO channel estimation at millimeter wave (mmWave) frequencies. Using a subspace approach, we develop a protocol enabling the estimation of the right (resp. left) singular vectors at the transmitter (resp. receiver) side; then, we adapt the projection approximation subspace tracking with deflation (PASTd) and the orthogonal Oja (OOJA) algorithms to our framework and obtain two channel estimation algorithms. The hybrid analog/digital nature of the beamformer is also explicitly taken into account at the algorithm design …
Hybrid analog/digital precoding allows millimeter wave MIMO systems to leverage large antenna array gains while permitting low cost and power consumption hardware. Most prior work has focused on hybrid precoding for narrow-band mmWave systems. MmWave systems, however, will likely operate on wideband channels with frequency selectivity. Therefore, this paper considers frequency selective hybrid precoding with RF beamforming vectors taken from a quantized codebook. For this system, a low-complexity yet near-optimal greedy algorithm is developed for the design of the hybrid analog/digital precode…
In this paper, we investigate a multi-cell millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) network with low-precision analog-to-digital converters (ADCs) at the base station (BS). Each cell serves multiple users and each user is equipped with multiple antennas but driven by a single RF chain. We first introduce a channel estimation strategy for the mmWave massive MIMO network and analyze the achievable rate with imperfect channel state information. Then, we derive an insightful lower bound for the achievable rate, which becomes tight with a growing number of users. The b…
In this paper, we investigate relay selection for cooperative multiple-antenna systems that are equipped with buffers, which increase the reliability of wireless links. In particular, we present a novel relay selection technique based on switching and the Max-Link protocol that is named Switched Max-Link. We also introduce a novel relay selection criterion based on the maximum likelihood (ML) principle denoted maximum minimum distance that is incorporated into. Simulations are then employed to evaluate the performance of the proposed and existing techniques.
This letter investigates the joint active and passive beamforming optimization for intelligent reflecting surface (IRS) aided multiuser multiple-input multiple-output systems with the objective of maximizing the weighted sum-rate. We show that this problem can be solved via a matrix weighted mean square error minimization equivalence. In particular, for the optimization of the passive IRS beamforming, we first propose an iterative algorithm with excellent performance based on the manifold optimization. By using the matrix fractional programming technique to obtain a more tractable object funct…
In this work, we consider the problem of reduced latency of low-density parity-check (LDPC) codes with iterative detection and decoding (IDD) receiver in multiuser multiple-antenna systems. The proposed knowledge-aided IDD (KA-IDD) system employs a minimum mean-square error detector with refined iterative processing and a reweighted belief propagation (BP) decoding algorithm. We present reweighted BP decoding algorithms, which exploit the knowledge of short cycles in the graph structure and reweighting factors derived from the expansion of hypergraphs. Simulation results show that the proposed…
In this paper, adaptive pilot beam sequence design for channel estimation in large millimeter-wave (mmWave) MIMO systems is considered. By exploiting the sparsity of mmWave MIMO channels with the virtual channel representation and imposing a Markovian random walk assumption on the physical movement of the line-of-sight (LOS) and reflection clusters, it is shown that the sparse channel estimation problem in large mmWave MIMO systems reduces to a sequential detection problem that finds the locations and values of the non-zero-valued bins in a two-dimensional rectangular grid, and the optimal ada…
We propose beam division multiple access (BDMA) with per-beam synchronization (PBS) in time and frequency for wideband massive multiple-input multiple-output (MIMO) transmission over millimeter-wave (mmW)/Terahertz (THz) bands. We first introduce a physically motivated beam domain channel model for massive MIMO and demonstrate that the envelopes of the beam domain channel elements tend to be independent of time and frequency when both the numbers of antennas at base station and user terminals (UTs) tend to infinity. Motivated by the derived beam domain channel properties, we then propose PBS f…
Massive multiple-input multiple-output (MIMO) systems use antenna arrays with a large number of antenna elements to serve many different users simultaneously. The large number of antennas in the system makes, however, the channel state information (CSI) acquisition strategy design critical and particularly challenging. Interestingly, in the context of massive MIMO systems, channels exhibit a large degree of spatial correlation which results in strongly rank-deficient spatial covariance matrices at the base station (BS). With the final objective of analyzing the benefits of covariance-aided upl…
Large antenna arrays will be needed in future millimeter wave (mmWave) cellular networks, enabling a large number of different possible antenna architectures and multiple-input multiple-output (MIMO) techniques. It is still unclear which MIMO technique is most desirable as a function of different network parameters. This paper, therefore, compares the coverage and rate performance of hybrid beamforming enabled multi-user (MU) MIMO and single-user spatial multiplexing (SM) with single-user analog beamforming (SU-BF). A stochastic geometry model for coverage and rate analysis is proposed for MU-…
Hybrid analog-digital architectures are considered as promising candidates for implementing millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems since they enable a considerable reduction of the required number of costly radio frequency (RF) chains by moving some of the signal processing operations into the analog domain. However, the analog feed network, comprising RF dividers, combiners, phase shifters, and line connections, of hybrid MIMO architectures is not scalable due to its prohibitively high power consumption for large numbers of transmit antennas. Motivated …
Caching is an effective technique to improve user perceived experience for content delivery in wireless networks. Wireless caching differs from traditional web caching in that it can exploit the broadcast nature of wireless medium and hence opportunistically change the network topologies. This paper studies a cache-aided MIMO interference network with 3 transmitters each equipped with M antennas and 3 receivers each with N antennas. With caching at both the transmitter and receiver sides, the network is changed to hybrid forms of MIMO broadcast channel, MIMO X channel, and MIMO multicast chann…
Millimeter Wave (mmWave) massive Multiple Input Multiple Output (MIMO) systems realizing directive beamforming require reliable estimation of the wireless propagation channel. However, mmWave channels are characterized by high variability that severely challenges their recovery over short training periods. Current channel estimation techniques exploit either the channel sparsity in the beamspace domain or its low rank property in the antenna domain, nevertheless, they still require large numbers of training symbols for satisfactory performance. In this paper, we present a novel channel estimat…
Lenstra-Lenstra-Lovasz (LLL) algorithm, which is one of the lattice reduction (LR) techniques, has been extensively used to obtain better basis of the channel matrix. In this paper, we jointly apply Seysen's lattice reduction algorithm (SA), instead of LLL, with the conventional linear precoding algorithms. Since SA obtains more orthogonal lattice basis compared to that obtained by LLL, lattice reduction aided (LRA) precoding based on SA algorithm outperforms the LRA precoding with LLL. Simulation results demonstrate that a gain of 0.5dB at target BER of 10^-5 is achieved when SA is used inste…
The use of mmWave frequencies is one of the key strategies to achieve the fascinating 1000x increase in the capacity of future 5G wireless systems. While for traditional sub-6 GHz cellular frequencies several well-developed statistical channel models are available for system simulation, similar tools are not available for mmWave frequencies, thus preventing a fair comparison of independently developed transmission and reception schemes. In this paper we provide a simple albeit accurate statistical procedure for the generation of a clustered MIMO channel model operating at mmWaves, for both the…
In this paper, we study a multi-user multiple-input-multiple-output secrecy simultaneous wireless information and power transfer (SWIPT) channel which consists of one transmitter, one cooperative jammer (CJ), multiple energy receivers (potential eavesdroppers, ERs), and multiple co-located receivers (CRs). We exploit the dual of artificial noise (AN) generation for facilitating efficient wireless energy transfer and secure transmission. Our aim is to maximize the minimum harvested energy among ERs and CRs subject to secrecy rate constraints for each CR and total transmit power constraint. By i…
Intelligent reflecting surfaces (IRSs) are promising enablers for high-capacity wireless communication systems by constructing favorable channels between the transmitter and receiver. However, general, accurate, and tractable outage analysis for IRS-aided multiple-input-multiple-output (MIMO) systems is not available in the literature. In this paper, we first characterize the mutual information (MI) of IRS-aided MIMO systems by capitalizing on large random matrix theory (RMT). Based on this result, a closed-form approximation for the outage probability is derived and a gradient-based algorithm…
Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc networks, and wearables. Signal processing is critical for enabling the next generation of mmWave communication. Due to the use of large antenna arrays at the transmitter and receiver, combined with r…
In this paper, adaptive training beam sequence design for efficient channel estimation in large millimeter-wave(mmWave) multiple-input multiple-output (MIMO) channels is considered. By exploiting the sparsity in large mmWave MIMO channels and imposing a Markovian random walk assumption on the movement of the receiver and reflection clusters, the adaptive training beam sequence design and channel estimation problem is formulated as a partially observableMarkov decision process (POMDP) problem that finds non-zero bins in a two-dimensional grid. Under the proposed POMDP framework, optimal and sub…
Reconfigurable intelligent surface (RIS) is envisioned to be a promising green technology to reduce the energy consumption and improve the coverage and spectral efficiency of massive multiple-input multiple-output (MIMO) wireless networks. In a RIS-aided MIMO system, the acquisition of channel state information (CSI) is important for achieving passive beamforming gains of the RIS, but is also challenging due to the cascaded property of the transmitter-RIS-receiver channel and the lack of signal processing capability of the passive RIS elements. The state-of-the-art approach for CSI acquisition…
In this paper, we establish a general framework on the reduced dimensional channel state information (CSI) estimation and pre-beamformer design for frequency-selective massive multiple-input multiple-output MIMO systems employing single-carrier (SC) modulation in time division duplex (TDD) mode by exploiting the joint angle-delay domain channel sparsity in millimeter (mm) wave frequencies. First, based on a generic subspace projection taking the joint angle-delay power profile and user-grouping into account, the reduced rank minimum mean square error (RR-MMSE) instantaneous CSI estimator is de…
The recent concept of beamspace multiple input multiple output (MIMO) can significantly reduce the number of required radio-frequency (RF) chains in millimeter-wave (mmWave) massive MIMO systems without obvious performance loss. However, the fundamental limit of existing beamspace MIMO is that, the number of supported users cannot be larger than the number of RF chains at the same time-frequency resources. To break this fundamental limit, in this paper we propose a new spectrum and energy efficient mmWave transmission scheme that integrates the concept of non-orthogonal multiple access (NOMA) …
The application of hybrid precoding in millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems has been proved effective for reducing the number of radio frequency (RF) chains. However, the maximum number of independent data streams is conventionally restricted by the number of RF chains, which leads to limiting the spatial multiplexing gain. To further improve the achievable spectral efficiency (SE), in this paper we propose a novel generalized spatial modulation (GenSM) aided mmWave MIMO system to convey an extra data stream via the index of the active antennas group, while no…
In this paper, we consider the problem of iterative detection and decoding (IDD) for multi-antenna systems using low-density parity-check (LDPC) codes. The proposed IDD system consists of a soft-input soft-output parallel interference (PIC) cancellation scheme with linear minimum mean-square error (MMSE) receive filters and two novel belief propagation (BP) decoding algorithms. The proposed BP algorithms exploit the knowledge of short cycles in the graph structure and the reweighting factors derived from the hypergraph's expansion. Simulation results show that when used to perform IDD for mult…
The highly sparse nature of propagation channels and the restricted use of radio frequency (RF) chains at transceivers limit the performance of millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. Introducing reconfigurable antennas to mmWave can offer an additional degree of freedom on designing mmWave MIMO systems. This paper provides a theoretical framework for studying the mmWave MIMO with reconfigurable antennas. We present an architecture of reconfigurable mmWave MIMO with beamspace hybrid analog-digital beamformers and reconfigurable antennas at both the transmitter a…
This paper investigates the performance of reconfigurable intelligent surface (RIS)-aided massive multiple-input multiple-output (MIMO) systems with direct links, and the phase shifts of the RIS are designed based on the statistical channel state information (CSI). We first derive the closed-form expression of the uplink ergodic data rate. Then, based on the derived expression, we use the genetic algorithm (GA) to solve the sum data rate maximization problem. With low-complexity maximal-ratio combination (MRC) and low-overhead statistical CSI-based scheme, we validate that the RIS can still br…
This paper studies the maximum throughput achievable with optimal scheduling in multi-hop mmWave picocellular networks with Multi-user Multiple-Input Multiple-Output (MU-MIMO) radios. MU-MIMO enables simultaneous transmission to multiple receivers (Space Division Multiplexing) and simultaneous reception from multiple transmitters (Space Division Multiple Access). The main contribution is the extension to MU-MIMO of the Network Utility Maximization (NUM) scheduling framework for multi-hop networks. We generalize to MU-MIMO the classic proof that Maximum Back Pressure (MBP) scheduling is NUM opt…
Full Duplex (FD) communication can revolutionize wireless communications as it avoids using independent channels for bi-directional communications. This work generalizes the point-to-point FD communication in millimeter wave (mmWave) band consisting of K-pairs of massive MIMO FD nodes operating simultaneously. We present a novel joint hybrid beamforming (HYBF) and combining scheme for weighted sum-rate (WSR) maximization to enable the coexistence of massive MIMO FD links cost-efficiently. The proposed algorithm relies on alternative optimization based on the minorization-maximization method. M…
The optimal design of the energy-efficient multiple-input multiple-output (MIMO) aided uplink ultra-reliable low-latency communications (URLLC) system is an important but unsolved problem. For such a system, we propose a novel absorbing-Markov-chain-based analysis framework to shed light on the puzzling relationship between the delay and reliability, as well as to quantify the system energy efficiency. We derive the transition probabilities of the absorbing Markov chain considering the Rayleigh fading, the channel estimation error, the zero-forcing multi-user-detection (ZF-MUD), the grant-free…
Hybrid precoding design is challenging for millimeter-wave (mmWave) massive MIMO. Most prior hybrid precoding schemes are designed to maximize the sum spectral efficiency (SSE), while seldom investigate the bit-error-rate (BER). Therefore, we propose an over-sampling codebook (OSC)-based hybrid minimum sum-mean-square-error (min-SMSE) precoding scheme for mmWave multi-user three-dimensional (3D)-MIMO systems to optimize the BER, where multi-user transmission with multiple data streams for each user is considered. Specifically, given the effective baseband channel consisting of the real channel…
