The imprints of bars on the vertical stellar population gradients of galactic bulges
Alireza Molaeinezhad, Jesús Falcón-Barroso, Inma Martínez-Valpuesta, Habib G. Khosroshahi, Alexandre Vazdekis, Francesco La Barbera, Reynier F. Peletier, Marc Balcells
备注：
22 pages, 7 main body figures +8 appendix figures, 2 tables. Accepted by MNRAS
This is the second paper of a series aimed to study the stellar kinematics and population properties of bulges in highly-inclined barred galaxies. In this work, we carry out a detailed analysis of the stellar age, metallicity and [Mg/Fe] of 28 highly-inclined ($i > 65^{o}$) disc galaxies, from S0 to S(B)c, observed with the SAURON integral-field spectrograph. The sample is divided into two clean samples of barred and unbarred galaxies, on the basis of the correlation between the stellar velocity and h$_3$ profiles, as well as the level of cylindrical rotation within the bulge region. We find that while the mean stellar age, metallicity and [Mg/Fe] in the bulges of barred and unbarred galaxies are not statistically distinct, the [Mg/Fe] gradients along the minor axis (away from the disc) of barred galaxies are significantly different than those without bars. For barred galaxies, stars that are vertically further away from the midplane are in general more [Mg/Fe]--enhanced and thus the vertical gradients in [Mg/Fe] for barred galaxies are mostly positive, while for unbarred bulges the [Mg/Fe] profiles are typically negative or flat. This result, together with the old populations observed in the barred sample, indicates that bars are long-lasting structures, and therefore are not easily destroyed. The marked [Mg/Fe] differences with the bulges of unbarred galaxies indicate that different formation/evolution scenarios are required to explain their build-up, and emphasizes the role of bars in redistributing stellar material in the bulge dominated regions.
Short (inner) bars of sub-kiloparsec radius have been hypothesized to be an important mechanism for driving gas inflows to small scales, thus feeding central black holes. Recent numerical simulations have shown that the growth of central black holes in galaxies can destroy short bars, when the black hole reaches a mass of $\sim 0.1\%$ of the total stellar mass of the galaxy. We study $N$-body simulations of galaxies with single and double bars to track the long-term evolution of the central stellar mass distribution. We find that the destruction of the short bar contributes significantly to th…
The complex relationships between AGN, bars and bulges
Masaryk University（马萨里克大学）；Lancaster University（兰卡斯特大学）；University of Minnesota（明尼苏达大学）；University of Toronto（多伦多大学）；University of Oxford（牛津大学）；European Space Agency (ESA)（欧洲空间局）
Bars have a complex three-dimensional shape. In particular their inner part is vertically much thicker than the parts further out. Viewed edge-on, the thick part of the bar is what is commonly known as a boxy-, peanut- or X- bulge and viewed face-on it is referred to as a barlens. These components are due to disc and bar instabilities and are composed of disc material. I review here their formation, evolution and dynamics, using simulations, orbital structure theory and comparisons to observations.
We present the first statistical study on the intrinsic three-dimensional (3D) shape of a sample of 83 galactic bars extracted from the CALIFA survey. We use the galaXYZ code to derive the bar intrinsic shape with a statistical approach. The method uses only the geometric information (ellipticities and position angles) of bars and discs obtained from a multi-component photometric decomposition of the galaxy surface-brightness distributions. We find that bars are predominantly prolate-triaxial ellipsoids (68%), with a small fraction of oblate-triaxial ellipsoids (32%). The typical flattening (i…
S0 galaxies are known to host classical bulges with a broad range of size and mass, while some such S0s are barred and some not. The origin of the bars has remained as a long-standing problem -- what made bar formation possible in certain S0s? By analysing a large sample of S0s with classical bulges observed by the Spitzer space telescope, we find that most of our barred S0s host comparatively low-mass classical bulges, typically with bulge-to-total ratio ($B/T$) less than $0.5$; whereas S0s with more massive classical bulges than these do not host any bar. Furthermore, we find that amongst th…
We study bulge formation in MW/M31-like galaxies in a $Λ$-cold dark matter scenario, focusing on the origin of high- and low-Sersic index bulges. For this purpose we use TNG50, a simulation of the IllustrisTNG project that combines a resolution of $\sim 8 \times 10^4 M_{\odot}$ in stellar particles with a cosmological volume 52 cMpc in extent. We parametrize bulge surface brightness profiles by the Sérsic index and the bulge-to-total (B/T) ratio obtained from two-component photometric decompositions. In our sample of 287 MW/M31-like simulated galaxies, $17.1\%$ of photometric bulges exhibit hi…
We use N-body simulations of bar formation in isolated galaxies to study the effect of bulge mass and bulge concentration on bar formation. Bars are global disk instabilities that evolve by transferring angular momentum from the inner to outer disks and to the dark matter halo. It is well known that a massive spherical component such as halo in a disk galaxy can make it bar stable. In this study we explore the effect of another spherical component, the bulge, on bar formation in disk galaxies. In our models we vary both the bulge mass and concentration. We have used two sets of models, one tha…
Stellar bars are important internal drivers of secular evolution in disk galaxies. Using a sample of nearby spiral galaxies with weak and strong bars, we explore the relationships between the star formation feature and stellar bars in galaxies. We find that galaxies with weak bars tend to be coincide with low concentrical star formation activity, while those with strong bars show a large scatter in the distribution of star formation activity. We find enhanced star formation activity in bulges towards stronger bars, although not predominantly, consistent with previous studies. Our results sugge…
The majority of massive disk galaxies, including our own, have stellar bars with vertically thick inner regions -- so-called "boxy/peanut-shaped" (B/P) bulges. The most commonly suggested mechanism for the formation of B/P bulges is a violent vertical "buckling" instability in the bar, something that has been seen in N-body simulations for over twenty years, but never identified in real galaxies. Here, we present the first direct observational evidence for ongoing buckling in two nearby galaxies (NGC 3227 and NGC 4569), including characteristic asymmetric isophotes and (in NGC 4569) stellar-ki…
From a sample of 84 local barred, moderately inclined disc galaxies, we determine the fraction which host boxy or peanut-shaped (B/P) bulges (the vertically thickened inner parts of bars). We find that the frequency of B/P bulges in barred galaxies is a very strong function of stellar mass: 79% of the bars in galaxies with log (M_{star}/M_{sun}) >~ 10.4 have B/P bulges, while only 12% of those in lower-mass galaxies do. (We find a similar dependence in data published by Yoshino & Yamauchi 2015 for edge-on galaxies.) There are also strong trends with other galaxy parameters -- e.g., Hubble type…
We present an analysis of the impact of bars and bulges on the radial distributions of the different types of supernovae (SNe) in the stellar discs of host galaxies with various morphologies. We use a well-defined sample of 500 nearby (< 100 Mpc) SNe and their low-inclined (i < 60 deg) and morphologically non-disturbed S0-Sm host galaxies from the Sloan Digital Sky Survey. We find that in Sa-Sm galaxies, all core-collapse (CC) and vast majority of SNe Ia belong to the disc, rather than the bulge component. The radial distribution of SNe Ia in S0-S0/a galaxies is inconsistent with their distrib…
We have measured the radial light profiles and global shapes of bars using two-dimensional 3.6 $μm $ image decompositions for 144 face-on barred galaxies from the Spitzer Survey of Stellar Structure in Galaxies (S4G). The bar surface brightness profile is correlated with the stellar mass and bulge-to-total (B/T) ratio of their host galaxies. Bars in massive and bulge-dominated galaxies (B/T$>$0.2) show a flat profile, while bars in less massive, disk-dominated galaxies (B/T$\sim$0) show an exponential, disk-like profile with a wider spread in the radial profile than in the bulge-dominated gala…
We show for the first time, that a fully cosmological hydrodynamical simulation can reproduce key properties of the innermost region of the Milky Way. Our high resolution simulation matches the profile and kinematics of the Milky Way's boxy/peanut-shaped bulge, and hence we can use it to reconstruct and understand the bulge assembly. In particular, the age dependence of the X-shape morphology of the simulated bulge parallels the observed metallicity dependent split in the red clump stars of the inner Galaxy. We use this feature to derive an observational metric that allows us to quantify when …
We estimate the current extinction-corrected H$α$ star formation rate (SFR) of the different morphological components that shape galaxies (bulges, bars, and disks). We use a multi-component photometric decomposition based on SDSS imaging to CALIFA Integral Field Spectroscopy datacubes for a sample of 219 galaxies. This analysis reveals an enhancement of the central SFR and specific SFR (sSFR $=$ SFR/$M_{\star}$) in barred galaxies. Along the Main Sequence, we find more massive galaxies in total have undergone efficient suppression (quenching) of their star formation, in agreement with many stu…
While bars are common in disk galaxies, their formation conditions are not well understood. We use $N$-body simulations to study bar formation and evolution in isolated galaxies consisting of a stellar disk, a classical bulge, and a dark halo. We consider 24 galaxy models that are similar to the Milky Way but differ in the mass and compactness of the classical bulge and halo concentration. We find that the bar formation requires $(Q_{T,\text{min}}/1.2)^2 + (\text{CMC}/0.05)^2\lesssim 1$, where $Q_{T,\text{min}}$ and CMC refers to the minimum value of the Toomre stability parameter and the cent…
The growth of black holes (BHs) in disk galaxies lacking classical bulges, which implies an absence of significant mergers, appears to be driven by secular processes. Short bars of sub-kiloparsec radius have been hypothesized to be an important mechanism for driving gas inflows to small scale, feeding central BHs. In order to quantify the maximum BH mass allowed by this mechanism, we examine the robustness of short bars to the dynamical influence of BHs. Large-scale bars are expected to be robust, long-lived structures; extremely massive BHs, which are rare, are needed to completely destroy su…
The origin of S0 galaxies is discussed in the framework of early mergers in a Cold Dark Matter cosmology, and in a scenario where S0s are assumed to be former spirals stripped of gas. From an analysis of 127 early-type disk galaxies (S0-Sa), we find a clear correlation between the scale parameters of the bulge (r_eff) and the disk (h_R), a correlation which is difficult to explain if these galaxies were formed in mergers of disk galaxies. However, the stripping hypothesis, including quiescent star formation, is not sufficient to explain the origin of S0s either, because it is not compatible wi…
The Impact of Bars, Spirals and Bulge-Size on Gas-Phase Metallicity Gradients in MaNGA Galaxies
University of California（加州大学）；Bryn Mawr College（布林茅尔学院）；Haverford College（哈弗福德学院）；University of Arizona（亚利桑那大学）；Space Telescope Science Institute（太空望远镜科学研究所）；Johns Hopkins University（约翰斯·霍普金斯大学）；Istituto Nazionale di Astrofisica–Arcetri（意大利国家天体物理研究所-阿切特里）
Federal University of Rio de Janeiro（里约热内卢联邦大学）；Kyungpook National University（庆北国立大学）；Centro Brasiliero de Pesquisas Físicas (CBPF)（巴西物理研究中心）；Yonsei University（延世大学）；Instituto de Física, Universidade Federal do Rio de Janeiro（里约热内卢联邦大学物理研究所）；European Southern Observatory（欧洲南方天文台）；Laboratoire d’Astrophysique de Marseille (LAM), UMR7326, CNRS/Aix Marseille Université（马赛天体物理学实验室）；Departamento de Astronomia（天文学系）
We use cosmological hydrodynamical simulations of the formation of Milky Way-mass galaxies to study the relative importance of the main stellar components, i.e., discs, bulges, and bars, at redshift zero. The main aim of this work is to understand if estimates of the structural parameters of these components determined from kinematics (as is usually done in simulations) agree well with those obtained using a photometric bulge/disc/bar decomposition (as done in observations). To perform such a comparison, we have produced synthetic observations of the simulation outputs with the Monte-Carlo rad…
In barred galaxies, the contours of stellar velocity dispersions ($σ$) are generally expected to be oval and aligned with the orientation of bars. However, many double-barred (S2B) galaxies exhibit distinct $σ$ peaks on the minor axis of inner bars, which we termed "$σ$-humps," while two local $σ$ minima are present close to the ends of inner bars, i.e., "$σ$-hollows." Analysis of numerical simulations shows that $σ_z$-humps or hollows should play an important role in generating the observed $σ$-humps+hollows in low-inclination galaxies. In order to systematically investigate the properties of…
We study the colors and orientations of structures in low and intermediate inclination barred galaxies. We test the hypothesis that barlenses, roundish central components embedded in bars, could form a part of the bar in a similar manner to boxy/peanut bulges in the edge-on view. A sample of 79 barlens galaxies was selected from the S$^4$G and the NIRS0S surveys. The sizes, ellipticities, and orientations of barlenses were measured and used to define the barlens regions in the color measurements. The orientations of barlenses were studied with respect to those of the "thin bars" and the line-o…
The stellar populations in the inner kiloparsecs of the Milky Way (MW) show complex kinematical and chemical structures. The origin and evolution of these structures is still under debate. Here we study the central region of a fully cosmological hydrodynamical simulation of a disk galaxy that reproduces key properties of the inner kiloparsecs of the MW: it has a boxy morphology and shows an overall rotation and dispersion profile in agreement with observations. We use a clustering algorithm on stellar kinematics to identify a number of discrete kinematic components: a high- and low-spin disk, …
We explore trends in the morphology and line-of-sight (los) velocity of stellar populations in the inner regions of disc galaxies, using N-body simulations with both a thin (kinematically cold) and a thick (kinematically hot) disc which form a bar and boxy/peanut (b/p) bulge. The bar in the thin disc component is $\sim$50\% stronger than the thick disc bar and is more elongated, with an axis ratio almost half that of the thick disc bar. The thin disc b/p bulge has a pronounced X-shape, while the thick disc b/p is weaker with a rather boxy shape. This leads to the signature of the b/p bulge in …
Through vertical resonances, bars can produce pseudo-bulges, within secular evolution. Bulges and pseudo-bulges have doubled their mass since z=1. The frequency of bulge-less galaxies at z=0 is difficult to explain, especially since clumpy galaxies at high z should create classical bulges in all galaxies. This issue is solved in modified gravity models. Bars and spirals in a galaxy disk, produce gravity torques that drive the gas to the center and fuel central star formation and nuclear activity. At 0.1-1kpc scale, observations of gravity torques show that only about one third of Seyfert galax…
N-body simulations show that "box-shaped bulges" of edge-on galaxies are not bulges at all: they are bars seen side-on. The two components that we readily see in edge-on Sb galaxies like NGC 4565 are a disk and a bar, but face-on SBb galaxies always show a disk, a bar, and a (pseudo)bulge. Where is the (pseudo)bulge in NGC 4565? We use archival Hubble Space Telescope K-band and Spitzer Space Telescope 3.6 um images to penetrate the dust in NGC 4565. We find a high surface brightness, central stellar component, distinct from the boxy bar and from the galaxy's disk. Its minor-axis profile has a …
We use a data set of nearby galaxies drawn from the HERACLES, ATLAS3D, and COLD GASS surveys to study variations in molecular gas depletion time (Tdep) in galaxy structures such as bulges, grand-design spiral arms, bars and rings. Molecular gas is traced by CO line emission and star formation rate (SFR) is derived using the combination of far-ultraviolet and mid-infrared (MIR) data. The contribution of old stars to MIR emission for the ATLAS3D sample is corrected using 2MASS K-band images. We apply a two-dimensional image decomposition algorithm to decompose galaxies into bulges and discs. Spi…
We review the observed morphological, photometric, and kinematic properties of boxy/peanut (B/P) shape bulges. Nearly half of the bulges in the nearby edge-on galaxies have these characteristics, which fraction is similar to the observed bar fraction in Hubble types earlier than Scd. B/P bulges are generally detected in the edge-on view, but it has been recently demonstrated that barlenses, which are lens-like structures embedded in bars, are the more face-on counterparts of the B/P bulges. Multi-component structural decompositions have shown that B/P/barlens structures are likely to account f…
We present here a thorough photometric analysis of double-barred galaxies, consisting of i) two-dimensional photometric decompositions including a bulge, inner bar, outer bar, and (truncated) disc; and ii) three-dimensional statistical deprojections to derive the intrinsic shape of bulges, inner bars, and outer bars. This is the first time the combination of both techniques is applied to a sample of double-barred galaxies. It represents a step forward with respect to previous works, which are based on properties of the integrated light through ellipse fitting and unsharp masking. In this first…
Boxy/Peanut/X-shaped (B/P/X) bulges are studied using the 3.6 mum images from the Spitzer Survey of Stellar Structure in Galaxies, and the K_s-band images from the Near-IR S0 galaxy Survey. They are compared with the properties of barlenses, defined as lens-like structures embedded in bars, with sizes of about 50% of bars and axial ratios of 0.6-0.9. Based on observations and recent simulation models we show evidence that barlenses are the more face-on counterparts of B/P/X-shaped bulges. Using unsharp masks 18 new X-shaped structures are identified, covering a large range of galaxy inclinatio…
It is well established that bars evolve significantly after they form in galaxy discs, often changing shape both in and out of the disc plane. In some cases they may bend or buckle out of the disc plane resulting in the formation of boxy/peanut/x-shape bulges. In this paper we show that the dark matter halo shape affects bar formation and buckling. We have performed N-body simulations of bar buckling in non-spherical dark matter halos and traced bar evolution for 8 Gyr. We find that bar formation is delayed in oblate halos, resulting in delayed buckling whereas bars form earlier in prolate hal…
We present multi-component decomposition of high-quality $R$-band images of 312 disk galaxies from the Carnegie-Irvine Galaxy Survey. In addition to bulges and disks, we successfully model nuclei, bars, disk breaks, nuclear/inner lenses, and inner rings. Our modeling strategy treats nuclear rings and nuclear bars as part of the bulge component, while other features such as spiral arms, outer lenses, and outer rings are omitted from the fits because they are not crucial for accurate bulge measurements. The error budget of bulge parameters includes the uncertainties from sky level measurements a…
We present the results of two-component (disc+bar) and three-component (disc+bar+bulge) multiwavelength 2D photometric decompositions of barred galaxies in five SDSS bands ($ugriz$). This sample of $\sim$3,500 nearby ($z<0.06$) galaxies with strong bars selected from the Galaxy Zoo citizen science project is the largest sample of barred galaxies to be studied using photometric decompositions which include a bar component. With detailed structural analysis we obtain physical quantities such as the bar- and bulge-to-total luminosity ratios, effective radii, Sérsic indices and colours of the indi…
In this paper, we use the Herschel Reference Survey to make a direct test of the hypothesis that the growth of a stellar bulge leads to a reduction in the star-formation efficiency of a galaxy (or conversely a growth in the gas-depletion timescale) as a result of the stabilisation of the gaseous disk by the gravitational field of the bulge. We find a strong correlation between star-formation efficiency and specific star-formation rate in galaxies without prominent bulges and in galaxies of the same morphological type, showing that there must be some other process besides the growth of a bulge …
We investigate how the properties of spiral arms relate to other fundamental galaxy properties, including bars and disc breaks. We use previously published measurements of those properties, and our own measurements of arm and bar contrasts for a large sample of galaxies, using $3.6 \mathrm{μm}$ images from the Spitzer Survey of Stellar Structure in Galaxies (S4G). Flocculent galaxies are clearly distinguished from other spiral arm classes, especially by their lower stellar mass and surface density. Multi-armed and grand-design galaxies are similar in most of their fundamental parameters, exclu…
We present a study of the effect of bulge mass on the evolution of bar pattern speed in isolated disk galaxies using N-body simulations. Earlier studies have shown that disk stars at the inner resonances can transfer a significant amount of angular momentum to the dark matter halo and this results in the slow down of the bar pattern speed. In this paper we investigate how the mass of the other spheroidal component, the bulge, affects bar pattern speeds. In our galaxy models the initial bars are all rotating fast as the R parameter, which is the ratio of the corotation radius to bar radius is l…
Within Rotation Curves (RC) is encoded the kinematical state of the stellar disc as well as information about the dynamical mechanisms driving the secular evolution of galaxies. To explain the characteristic features of RCs that arise by the influence of spiral patterns and bar, we study the kinematics of the stellar disc in a set of spiral galaxy models specifically tailored for this purpose. We find that, for our models, the induced non-circular motions are more prominent for spirals with larger pitch angle, the ones typical in late type galaxies. Moreover, inside corotation, stars rotate sl…
Bars play a major role in driving the evolution of disk galaxies and in shaping their present properties. They cause angular momentum to be redistributed within the galaxy, emitted mainly from (near-)resonant material at the inner Lindblad resonance of the bar, and absorbed mainly by (near-)resonant material in the spheroid (i.e., the halo and, whenever relevant, the bulge) and in the outer disk. Spheroids delay and slow down the initial growth of the bar they host, but, at the later stages of the evolution, they strengthen the bar by absorbing angular momentum. Increased velocity dispersion i…
We study nine S0-Sb galaxies with (photometric) bulges consisting of two distinct components. The outer component is a flattened, kinematically cool, disklike structure: a "disky pseudobulge". Embedded inside is a rounder, kinematically hot spheroid: a "classical bulge". This indicates that pseudobulges and classical bulges are not mutually exclusive: some galaxies have both. The disky pseudobulges almost always have an exponential disk (scale lengths = 125-870 pc, mean $\sim 440$ pc) with disk-related subcomponents: nuclear rings, bars, and/or spiral arms. They constitute 11-59% of the galaxy…
We investigate barlenses in the Calar Alto Legacy Integral Field Area (CALIFA) survey galaxies, studying their morphologies, stellar populations and metallicities. Multi-component decompositions are made using the Sloan Digital Sky Survey (SDSS) images and making GALFIT models, fitting besides bulges, disks and bars, also barlenses, which are the face-on counterparts of Boxy/Peanut bulges. Similar GALFIT models as were made for the galaxies, were made also for the simulation snap-shots. For the stellar populations and metallicities in the various structure components CALIFA IFU-observations ar…
Galactic bars are unstable to a vertical buckling instability which heats the disk and in some cases forms a boxy/peanut shaped bulge. We analyze the buckling instability as an application of classical Euler buckling followed by nonlinear gravitational Landau damping in the collisionless system. We find that the buckling instability is dictated by the kinematic properties and geometry of the bar. The analytical result is compared to simulations of isolated galaxies containing the disk and dark matter components. Our results demonstrate that violent buckling does not destroy bars while a less e…
We analyse a set of collisionless disc galaxy simulations to study the consequences of bar formation and evolution on the M-sigma relation of supermassive black holes. The redistribution of angular momentum driven by bars leads to a mass increase within the central region, raising the velocity dispersion of the bulge, sigma, on average by ~12% and as much as ~20%. If a disc galaxy with a SMBH satisfying the M-sigma relation forms a bar, and the SMBH does not grow in the process, then the increase in sigma moves the galaxy off the M-sigma relation. We explore various effects that can affect thi…
We study the structural properties of Low Surface Brightness galaxies (LSB) using a sample of 263 galaxies observed by the Green Bank Telescope (Schneider et al 1992). We perform 2D decompositions of these galaxies in the SDSS $g$, $r$ and $i$ bands using the GALFIT software. Our decomposition reveals that about $60\%$ of these galaxies are bulgeless i.e., their light distributions are well modelled by pure exponential disks. The rest of the galaxies were fitted with two components: a Sersic bulge and an exponential disk. Most of these galaxies have bulge-to-total (B/T) ratio less than 0.1. Ho…
Context. Efforts to look for signatures of the first stars have concentrated on metal-poor halo objects. However, the low end of the bulge metallicity distribution has been shown to host some of the oldest objects in the Milky Way and hence this Galactic component potentially offers interesting targets to look at imprints of the first stellar generations. As a pilot project, we selected bulge field stars already identified in the ARGOS survey as having [Fe/H] ~ -1 and oversolar [alpha/Fe] ratios, and we used FLAMES-UVES to obtain detailed abundances of key elements that are believed to reveal …
Orbit-based structural decomposition and stellar population recovery for edge-on barred galaxies
Westlake University（西湖大学）；Shanghai Astronomical Observatory, Chinese Academy of Sciences（中国科学院上海天文台）；Villanova University（维拉诺瓦大学）；University of Michigan（密歇根大学）；University of Vienna（维也纳大学）；Cardiff University（卡迪夫大学）
We aim at investigating the formation process of weak bars by measuring their properties in a sample of 29 nearby SAB galaxies, spanning a wide range of morphological types and luminosities. The sample galaxies were selected to have an intermediate inclination, a bar at an intermediate angle between the disc minor and major axes, and an undisturbed morphology and kinematics to allow the direct measurement of the bar pattern speed. Combining our analysis with previous studies, we compared the properties of weak and strong bars. We measured the bar radius and strength from the r-band images avai…
