Thermal properties of solid-state materials are a fundamental topic of study with important practical implications. For example, anisotropic displacement parameters (ADPs) are routinely used in physics, chemistry, and crystallography to quantify the thermal motion of atoms in crystals. ADPs are commonly derived from diffraction experiments, but recent developments have also enabled their first-principles prediction using periodic density functional theory (DFT). Here, we combine experiments and dispersion-corrected DFT to quantify lattice thermal expansion and ADPs in crystalline α-sulfur (S8), a prototypical elemental solid that is controlled by the interplay of covalent and van der Waals interactions. We first report on single-crystal and powder X-ray diffraction (XRD) measurements that provide new and improved reference data from 10 K up to room temperature. We then use several popular dispersion-corrected DFT methods to predict vibrational and thermal properties of α-sulfur, including the anisotropic lattice thermal expansion. Hereafter, ADPs are derived in the commonly used harmonic approximation (in the computed zero-Kelvin structure) and also in the quasi-harmonic approximation (QHA) which takes the predicted lattice thermal expansion into account. At the PBE+D3(BJ) level, the latter leads to excellent agreement with experiments. Finally, more general implications of this study for realistic materials modeling at finite temperature are discussed.
Neutron Diffraction Measurements and First Principles Study of Thermal Motion of Atoms in Select M_{n+1}AX_n and Binary MX Transition Metal Carbide Phases
在这里,我们比较了在选定的三元碳化物与公式Mn+1AXn(“最大相”,M = Ti,Cr; A = Al,Si,Ge; X = C,N)的原子的热振动,确定从第一原理声子计算的高温中子粉末衍射研究。还研究了过渡金属碳化物TiC、TaC和WC,以在更简单的碳化物上测试我们的方法。良好的定性和定量的二元碳化物的预测值和实验值之间的协议。对于所研究的所有MAX相-Ti 3SiC 2、Ti 3GeC 2、Ti 2AlN、Cr2 GeC和Ti4 AlN 3-密度泛函理论计算预测,A元素以最高振幅振动,并且在基面内以较高振幅各向异性振动,这与高温中子衍射研究的早期结果一致。在某些情况下,理论和实验原子位移参数之间的绝对值存在定量差异,例如各向异性的逆转或温度相关原子位移参数的系统偏移。计算了与模式相关的Grüneisen参数,探讨了系统的非谐性。
Sinusoidal Displacement Describes Disorder in CsPbBr3 Nanocrystal Superlattices
Istituto Italiano di Tecnologia(意大利理工大学);Università Cattolica del Sacro Cuore(天主教大学);Lund University(隆德大学);Massachusetts Institute of Technology(麻省理工学院);Istituto di Cristallografia (CNR-IC)(晶体学研究所(国家研究委员会));MAX IV Laboratory(MAX IV 实验室)
Ultrafast lattice dynamics and electron-phonon coupling in platinum extracted with a global fitting approach for time-resolved polycrystalline diffraction data
Enhanced room temperature ferromagnetism in nanostructured MoS2 flakes by hydrogen post-treatment: Combined experimental and first-principles-based studies
High-temperature neutron diffraction and first-principles study of temperature-dependent crystal structures and atomic vibrations in Ti3AlC2, Ti2AlC, and Ti5Al2C3
在此,我们报告的热膨胀和温度依赖的晶体结构的选择三元碳化物MAX相在Ti-Al-C相图在100-1000摄氏度的温度范围内。将含有38重量% Ti 5 Al 2 C 3,“523”),$32 wt.% Ti2AlC ("211"), 18 wt.% Ti3AlC2 ("312"), and 12 wt.% (Ti{0.5}Al{0.5})Al is studied by Rietveld analysis of high-temperature neutron diffraction data. We also report on the same for a single-phase sample of Ti$ _3 PDMATHABMN_2 $ for comparison. The thermal expansions of all the MAX phases studied are higher in the $ c $ direction than in the $ a$方向。体积膨胀系数--Ti 5Al 2C 3为9.3 x 10^-6,Ti 2AlC为9.2 x 10^-6,Ti 3AlC 2为9.0 x 10^-6--在一个标准差内相当。在Ti 5Al 2C 3中,类211和类312区域的Ti-C八面体的尺寸分别与Ti 2AlC和Ti 3AlC 2中的Ti-C八面…
Emerging hierarchical dislocation structures: Insights from scanning electron microscopy-electron backscatter diffraction in situ tensile testing and multifractal analysis
Accurate quantification of lattice temperature dynamics from ultrafast electron diffraction of single-crystal films using dynamical scattering simulations
Dependence of the structural and physical properties of Tl1-yFe2-z(Se1-xSx)2 with isovalent substitution of Se by S: decrease of TNeel with S content
用X射线衍射、电子衍射、磁化强度和输运测量等方法研究了Tl 1-yFe 2-zSe 2反铁磁体中硫或碲取代硒的效应。采用封管法合成了Tl0.8Fe1.5(Se_(1-x)X_x)_2(名义成分)固溶体。在硫的情况下,尽管在系列中达到了由Rietveld精化确定的最佳晶体学参数(即Fe-(Se,S)面间高度和(Se,S)-Fe-(Se,S)角,在这两个参数下,临界超导转变TPDMATHABMM通常在磷属元素化物中最大),但在低至4.2K的情况下没有发现超导性。准完整的Tl位点(y=0.05)与类似的A1-yFe 2-zSe 2(A = K,Rb,Cs)中的显著的碱性缺乏(y=0.2-0.3)相比,以及由此产生的铁价态、态密度和掺杂的差异,被认为可以解释这种超导性的缺乏。用碲取代的化合物,至少达到x=0.25,表现出超导转变,但可能是由于tetraphthalic Fe(Se,Te)杂质相。透射电子显微镜证实了来自$_{0.8}$ Fe $_{1.5}$(SePDMATHABMP S $_{x}$)$_{2}$系列的样品中有序铁空位网络的存在,其形式为四元$\sqrt{5}$ a $\times \sqrt{5}$ a $\times$ c超结构(\textit{I4/m})(如果铁空位水平增加,则与正交$\sqrt{2}$ a $\times 2\sqrt{2}$ a $\times…