Many man-made objects have intrinsic symmetries and Manhattan structure. By assuming an orthographic projection model, this paper addresses the estimation of 3D structures and camera projection using symmetry and/or Manhattan structure cues, which occur when the input is single- or multiple-image from the same category, e.g., multiple different cars. Specifically, analysis on the single image case implies that Manhattan alone is sufficient to recover the camera projection, and then the 3D structure can be reconstructed uniquely exploiting symmetry. However, Manhattan structure can be difficult to observe from a single image due to occlusion. To this end, we extend to the multiple-image case which can also exploit symmetry but does not require Manhattan axes. We propose a novel rigid structure from motion method, exploiting symmetry and using multiple images from the same category as input. Experimental results on the Pascal3D+ dataset show that our method significantly outperforms baseline methods.
University of the Balearic Islands（巴利阿里群岛大学）；IDISBA（巴利阿里群岛健康研究所）
Visual odometry algorithms tend to degrade when facing low-textured scenes -from e.g. human-made environments-, where it is often difficult to find a sufficient number of point features. Alternative geometrical visual cues, such as lines, which can often be found within these scenarios, can become particularly useful. Moreover, these scenarios typically present structural regularities, such as parallelism or orthogonality, and hold the Manhattan World assumption. Under these premises, in this work, we introduce MSC-VO, an RGB-D -based visual odometry approach that combines both point and line …
Centre for Research and Technology Hellas（希腊研究与技术中心）
It has been shown that global scene understanding tasks like layout estimation can benefit from wider field of views, and specifically spherical panoramas. While much progress has been made recently, all previous approaches rely on intermediate representations and postprocessing to produce Manhattan-aligned estimates. In this work we show how to estimate full room layouts in a single-shot, eliminating the need for postprocessing. Our work is the first to directly infer Manhattan-aligned outputs. To achieve this, our data-driven model exploits direct coordinate regression and is supervised end-…
Technical University of Munich（慕尼黑工业大学）；Google Inc.（谷歌公司）
In this paper, a robust RGB-D SLAM system is proposed to utilize the structural information in indoor scenes, allowing for accurate tracking and efficient dense mapping on a CPU. Prior works have used the Manhattan World (MW) assumption to estimate low-drift camera pose, in turn limiting the applications of such systems. This paper, in contrast, proposes a novel approach delivering robust tracking in MW and non-MW environments. We check orthogonal relations between planes to directly detect Manhattan Frames, modeling the scene as a Mixture of Manhattan Frames. For MW scenes, we decouple pose e…
Significant geometric structures can be compactly described by global wireframes in the estimation of 3D room layout from a single panoramic image. Based on this observation, we present an alternative approach to estimate the walls in 3D space by modeling long-range geometric patterns in a learnable Hough Transform block. We transform the image feature from a cubemap tile to the Hough space of a Manhattan world and directly map the feature to the geometric output. The convolutional layers not only learn the local gradient-like line features, but also utilize the global information to successfu…
MINDsLab, Inc.（MINDsLab 公司）；Seoul National University（首尔大学）
Predicting 3D room layout from single image is a challenging task with many applications. In this paper, we propose a new training and post-processing method for 3D room layout estimation, built on a recent state-of-the-art 3D room layout estimation model. Experimental results show our method outperforms state-of-the-art approaches by a large margin in predicting visible room layout. Our method has obtained the 3rd place in 2020 Holistic Scene Structures for 3D Vision Workshop.
This paper describes an approach to automatically extracting floor plans from the kinds of incomplete measurements that could be acquired by an autonomous mobile robot. The approach proceeds by reasoning about extended structural layout surfaces which are automatically extracted from the available data. The scheme can be run in an online manner to build water tight representations of the environment. The system effectively speculates about room boundaries and free space regions which provides useful guidance to subsequent motion planning systems. Experimental results are presented on multiple …
KAIST（韩国科学技术院）；Massachusetts Institute of Technology（麻省理工学院）
Most man-made environments, such as urban and indoor scenes, consist of a set of parallel and orthogonal planar structures. These structures are approximated by the Manhattan world assumption, in which notion can be represented as a Manhattan frame (MF). Given a set of inputs such as surface normals or vanishing points, we pose an MF estimation problem as a consensus set maximization that maximizes the number of inliers over the rotation search space. Conventionally, this problem can be solved by a branch-and-bound framework, which mathematically guarantees global optimality. However, the comp…
Convex Relaxation for Robust Vanishing Point Estimation in Manhattan World
Westlake University（西湖大学）；Zhejiang University（浙江大学）；University of Zaragoza（萨拉戈萨大学）；Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；Hunan University（湖南大学）
In this paper, we propose a method to obtain a compact and accurate 3D wireframe representation from a single image by effectively exploiting global structural regularities. Our method trains a convolutional neural network to simultaneously detect salient junctions and straight lines, as well as predict their 3D depth and vanishing points. Compared with the state-of-the-art learning-based wireframe detection methods, our network is simpler and more unified, leading to better 2D wireframe detection. With global structural priors from parallelism, our method further reconstructs a full 3D wirefr…
Federal Research Center “Computer Science and Control” of Russian Academy of Sciences（俄罗斯科学院“计算机科学与控制”联邦研究中心）；Moscow Institute of Physics and Technology (State University)（莫斯科物理技术学院（国立大学））；The Institute for Information Transmission Problems of Russian Academy of Sciences（俄罗斯科学院信息传输问题研究所）；Smart Engines Service LLC（Smart Engines服务有限责任公司）
This paper presents a method for metric rectification of planar objects that preserves angles and length ratios. An inner structure of an object is assumed to follow the laws of Manhattan World i.e. the majority of line segments are aligned with two orthogonal directions of the object. For that purpose we introduce the method that estimates the position of two vanishing points corresponding to the main object directions. It is based on an original optimization function of segments that estimates a vanishing point position. For calculation of the rectification homography with two vanishing poin…
Rakuten Institute of Technology（乐天技术研究所）；Facebook（脸书）
This paper presents a method of estimating the geometry of a room and the 3D pose of objects from a single 360-degree panorama image. Assuming Manhattan World geometry, we formulate the task as a Bayesian inference problem in which we estimate positions and orientations of walls and objects. The method combines surface normal estimation, 2D object detection and 3D object pose estimation. Quantitative results are presented on a dataset of synthetically generated 3D rooms containing objects, as well as on a subset of hand-labeled images from the public SUN360 dataset.
We present the first self-supervised method to train panoramic room layout estimation models without any labeled data. Unlike per-pixel dense depth that provides abundant correspondence constraints, layout representation is sparse and topological, hindering the use of self-supervised reprojection consistency on images. To address this issue, we propose Differentiable Layout View Rendering, which can warp a source image to the target camera pose given the estimated layout from the target image. As each rendered pixel is differentiable with respect to the estimated layout, we can now train the l…
Beijing Laboratory of Advanced Information Networks（北京先进信息网络实验室）；Beijing University of Posts and Telecommunications（北京邮电大学）；Horizon Robotics（地平线机器人）；Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）
Human pose estimation has witnessed a significant advance thanks to the development of deep learning. Recent human pose estimation approaches tend to directly predict the location heatmaps, which causes quantization errors and inevitably deteriorates the performance within the reduced network output. Aim at solving it, we revisit the heatmap-offset aggregation method and propose the Offset-guided Network (OGN) with an intuitive but effective fusion strategy for both two-stages pose estimation and Mask R-CNN. For two-stages pose estimation, a greedy box generation strategy is also proposed to k…
SenseTime Research（商汤科技研究院）；Tencent YouTu Lab（腾讯优图实验室）；Tsinghua University（清华大学）；The Chinese University of Hong Kong（香港中文大学）
Disparity estimation for binocular stereo images finds a wide range of applications. Traditional algorithms may fail on featureless regions, which could be handled by high-level clues such as semantic segments. In this paper, we suggest that appropriate incorporation of semantic cues can greatly rectify prediction in commonly-used disparity estimation frameworks. Our method conducts semantic feature embedding and regularizes semantic cues as the loss term to improve learning disparity. Our unified model SegStereo employs semantic features from segmentation and introduces semantic softmax loss,…
Northwestern Polytechnical University（西北工业大学）；University of Adelaide（阿德莱德大学）；Noah’s Ark Lab, Huawei（华为诺亚方舟实验室）
Accuracy of depth estimation from static images has been significantly improved recently, by exploiting hierarchical features from deep convolutional neural networks (CNNs). Compared with static images, vast information exists among video frames and can be exploited to improve the depth estimation performance. In this work, we focus on exploring temporal information from monocular videos for depth estimation. Specifically, we take the advantage of convolutional long short-term memory (CLSTM) and propose a novel spatial-temporal CSLTM (ST-CLSTM) structure. Our ST-CLSTM structure can capture not…
Graz University of Technology（格拉茨技术大学）；University of Crete（克里特大学）
Model-based approaches to 3D hand tracking have been shown to perform well in a wide range of scenarios. However, they require initialisation and cannot recover easily from tracking failures that occur due to fast hand motions. Data-driven approaches, on the other hand, can quickly deliver a solution, but the results often suffer from lower accuracy or missing anatomical validity compared to those obtained from model-based approaches. In this work we propose a hybrid approach for hand pose estimation from a single depth image. First, a learned regressor is employed to deliver multiple initial …
As an inherently ill-posed problem, depth estimation from single images is the most challenging part of monocular 3D object detection (M3OD). Many existing methods rely on preconceived assumptions to bridge the missing spatial information in monocular images, and predict a sole depth value for every object of interest. However, these assumptions do not always hold in practical applications. To tackle this problem, we propose a depth solving system that fully explores the visual clues from the subtasks in M3OD and generates multiple estimations for the depth of each target. Since the depth esti…
We present a bundle-adjustment-based algorithm for recovering accurate 3D human pose and meshes from monocular videos. Unlike previous algorithms which operate on single frames, we show that reconstructing a person over an entire sequence gives extra constraints that can resolve ambiguities. This is because videos often give multiple views of a person, yet the overall body shape does not change and 3D positions vary slowly. Our method improves not only on standard mocap-based datasets like Human 3.6M -- where we show quantitative improvements -- but also on challenging in-the-wild datasets suc…
Surface normal estimation from a single image is an important task in 3D scene understanding. In this paper, we address two limitations shared by the existing methods: the inability to estimate the aleatoric uncertainty and lack of detail in the prediction. The proposed network estimates the per-pixel surface normal probability distribution. We introduce a new parameterization for the distribution, such that its negative log-likelihood is the angular loss with learned attenuation. The expected value of the angular error is then used as a measure of the aleatoric uncertainty. We also present a …
University of Salerno（萨勒诺大学）；University of Molise（莫利塞大学）
Estimating the actual head orientation from 2D images, with regard to its three degrees of freedom, is a well known problem that is highly significant for a large number of applications involving head pose knowledge. Consequently, this topic has been tackled by a plethora of methods and algorithms the most part of which exploits neural networks. Machine learning methods, indeed, achieve accurate head rotation values yet require an adequate training stage and, to that aim, a relevant number of positive and negative examples. In this paper we take a different approach to this topic by using frac…
In this work, we address the problem of 3D human pose estimation from a sequence of 2D human poses. Although the recent success of deep networks has led many state-of-the-art methods for 3D pose estimation to train deep networks end-to-end to predict from images directly, the top-performing approaches have shown the effectiveness of dividing the task of 3D pose estimation into two steps: using a state-of-the-art 2D pose estimator to estimate the 2D pose from images and then mapping them into 3D space. They also showed that a low-dimensional representation like 2D locations of a set of joints c…
Technical University of Munich（慕尼黑工业大学）；Google（谷歌）；Tsinghua University（清华大学）
Directly regressing all 6 degrees-of-freedom (6DoF) for the object pose (e.g. the 3D rotation and translation) in a cluttered environment from a single RGB image is a challenging problem. While end-to-end methods have recently demonstrated promising results at high efficiency, they are still inferior when compared with elaborate P$n$P/RANSAC-based approaches in terms of pose accuracy. In this work, we address this shortcoming by means of a novel reasoning about self-occlusion, in order to establish a two-layer representation for 3D objects which considerably enhances the accuracy of end-to-end…
Optical flow estimation is one of the most studied problems in computer vision, yet recent benchmark datasets continue to reveal problem areas of today's approaches. Occlusions have remained one of the key challenges. In this paper, we propose a symmetric optical flow method to address the well-known chicken-and-egg relation between optical flow and occlusions. In contrast to many state-of-the-art methods that consider occlusions as outliers, possibly filtered out during post-processing, we highlight the importance of joint occlusion reasoning in the optimization and show how to utilize occlus…
University of Science and Technology of China（中国科学技术大学）；Zhejiang University（浙江大学）；DJI Technology（大疆创新科技有限公司）；Huawei（华为技术有限公司）；University of Adelaide（阿德莱德大学）
Multi-view depth estimation plays a critical role in reconstructing and understanding the 3D world. Recent learning-based methods have made significant progress in it. However, multi-view depth estimation is fundamentally a correspondence-based optimization problem, but previous learning-based methods mainly rely on predefined depth hypotheses to build correspondence as the cost volume and implicitly regularize it to fit depth prediction, deviating from the essence of iterative optimization based on stereo correspondence. Thus, they suffer unsatisfactory precision and generalization capability…
Aristotle University of Thessaloniki（亚里士多德塞萨洛尼基大学）
Electric Network Frequency (ENF) fluctuations constitute a powerful tool in multimedia forensics. An efficient approach for ENF estimation is introduced with temporal windowing based on the filter-bank Capon spectral estimator. A type of Gohberg-Semencul factorization of the model covariance matrix is used due to the Toeplitz structure of the covariance matrix. Moreover, this approach uses, for the first time in the field of ENF, a temporal window, not necessarily the rectangular one, at the stage preceding spectral estimation. Krylov matrices are employed for fast implementation of matrix inv…
Camera traps are a proven tool in biology and specifically biodiversity research. However, camera traps including depth estimation are not widely deployed, despite providing valuable context about the scene and facilitating the automation of previously laborious manual ecological methods. In this study, we propose an automated camera trap-based approach to detect and identify animals using depth estimation. To detect and identify individual animals, we propose a novel method D-Mask R-CNN for the so-called instance segmentation which is a deep learning-based technique to detect and delineate ea…
University of Trento（特伦托大学）；Huawei Technologies Ireland（华为技术爱尔兰公司）；Fondazione Bruno Kessler（布鲁诺·凯斯勒基金会）
Nowadays, the majority of state of the art monocular depth estimation techniques are based on supervised deep learning models. However, collecting RGB images with associated depth maps is a very time consuming procedure. Therefore, recent works have proposed deep architectures for addressing the monocular depth prediction task as a reconstruction problem, thus avoiding the need of collecting ground-truth depth. Following these works, we propose a novel self-supervised deep model for estimating depth maps. Our framework exploits two main strategies: refinement via cycle-inconsistency and distil…
VideoFlow: Exploiting Temporal Cues for Multi-frame Optical Flow Estimation
The Chinese University of Hong Kong（香港中文大学）；NVIDIA AI Technology Center（英伟达人工智能技术中心）；SenseTime Research（商汤科技研究院）；Tsinghua University（清华大学）；Centre for Perceptual and Interactive Intelligence（感知与交互智能研究中心）；Shanghai AI Laboratory（上海人工智能实验室）
We tackle the problem of estimating optical flow from a monocular camera in the context of autonomous driving. We build on the observation that the scene is typically composed of a static background, as well as a relatively small number of traffic participants which move rigidly in 3D. We propose to estimate the traffic participants using instance-level segmentation. For each traffic participant, we use the epipolar constraints that govern each independent motion for faster and more accurate estimation. Our second contribution is a new convolutional net that learns to perform flow matching, an…
Hangzhou Research Institute, Xidian University（西安电子科技大学杭州研究院）；Xidian University（西安电子科技大学）
For the current 3D human pose estimation task, a group of methods mainly learn the rules of 2D-3D projection from spatial and temporal correlation. However, earlier methods model the global features of the entire body joint in the time domain, but ignore the motion trajectory of individual joint. The recent work [29] considers that there are differences in motion between different joints and deals with the temporal relationship of each joint separately. However, we found that different joints show the same movement trends under some specific actions. Therefore, our proposed Fusionformer method…
The estimation of the camera poses associated with a set of images commonly relies on feature matches between the images. In contrast, we are the first to address this challenge by using objectness regions to guide the pose estimation problem rather than explicit semantic object detections. We propose Pose Refiner Network (PoserNet) a light-weight Graph Neural Network to refine the approximate pair-wise relative camera poses. PoserNet exploits associations between the objectness regions - concisely expressed as bounding boxes - across multiple views to globally refine sparsely connected view g…
Despite the great progress in 3D human pose estimation from videos, it is still an open problem to take full advantage of a redundant 2D pose sequence to learn representative representations for generating one 3D pose. To this end, we propose an improved Transformer-based architecture, called Strided Transformer, which simply and effectively lifts a long sequence of 2D joint locations to a single 3D pose. Specifically, a Vanilla Transformer Encoder (VTE) is adopted to model long-range dependencies of 2D pose sequences. To reduce the redundancy of the sequence, fully-connected layers in the fee…
Washington University in St. Louis（圣路易斯华盛顿大学）；The Boeing Company（波音公司）
Beyond depth estimation from a single image, the monocular cue is useful in a broader range of depth inference applications and settings---such as when one can leverage other available depth cues for improved accuracy. Currently, different applications, with different inference tasks and combinations of depth cues, are solved via different specialized networks---trained separately for each application. Instead, we propose a versatile task-agnostic monocular model that outputs a probability distribution over scene depth given an input color image, as a sample approximation of outputs from a pat…
Exploiting Aggregation and Segregation of Representations for Domain Adaptive Human Pose Estimation
Center for Research in Computer Vision, University of Central Florida（中佛罗里达大学计算机视觉研究中心）；Robotics Institute, Carnegie Mellon University（卡内基梅隆大学机器人研究所）；Department of Computer Science, Tulane University（杜兰大学计算机科学系）；University of North Carolina at Charlotte（北卡罗来纳大学夏洛特分校）
HOIGaze: Gaze Estimation During Hand-Object Interactions in Extended Reality Exploiting Eye-Hand-Head Coordination
University of Stuttgart Germany（斯图加特大学）；University of Tuebingen Germany（图宾根大学）；The Center for Bionic Intelligence Tuebingen Stuttgart Germany（图宾根-斯图加特生物智能中心）
Huazhong University of Science and Technology（华中科技大学）；Tencent AI Lab（腾讯AI实验室）
In this paper, we propose to estimate 3D hand pose by recovering the 3D coordinates of joints in a group-wise manner, where less-related joints are automatically categorized into different groups and exhibit different features. This is different from the previous methods where all the joints are considered holistically and share the same feature. The benefits of our method are illustrated by the principle of multi-task learning (MTL), i.e., by separating less-related joints into different groups (as different tasks), our method learns different features for each of them, therefore efficiently …
The University of Adelaide（阿德莱德大学）；The University of Queensland（昆士兰大学）
Augmenting RGB data with measured depth has been shown to improve the performance of a range of tasks in computer vision including object detection and semantic segmentation. Although depth sensors such as the Microsoft Kinect have facilitated easy acquisition of such depth information, the vast majority of images used in vision tasks do not contain depth information. In this paper, we show that augmenting RGB images with estimated depth can also improve the accuracy of both object detection and semantic segmentation. Specifically, we first exploit the recent success of depth estimation from m…
G2G: Exploiting Intra-Group Geometry for Inter-Group Pose Estimation
State Key Laboratory of Industrial Control and Technology, Zhejiang University（浙江大学工业控制技术国家重点实验室）；Zhejiang Humanoid Robot Innovation Center Co., Ltd.（浙江人形机器人创新中心有限公司）；School of Information Science and Engineering, Hangzhou Normal University（杭州师范大学信息科学与工程学院）
Uber Advanced Technologies Group（Uber先进技术集团）；University of Waterloo（滑铁卢大学）
We tackle the problem of exploiting Radar for perception in the context of self-driving as Radar provides complementary information to other sensors such as LiDAR or cameras in the form of Doppler velocity. The main challenges of using Radar are the noise and measurement ambiguities which have been a struggle for existing simple input or output fusion methods. To better address this, we propose a new solution that exploits both LiDAR and Radar sensors for perception. Our approach, dubbed RadarNet, features a voxel-based early fusion and an attention-based late fusion, which learn from data to …
Estimation of camera motion from a given image sequence becomes degraded as the length of the sequence increases. In this letter, this phenomenon is demonstrated and an approach to increase the estimation accuracy is proposed. The proposed method uses an omnidirectional camera in addition to the perspective one and takes advantage of its enlarged view by exploiting the correspondences between the omnidirectional and perspective images. Simulated and real image experiments show that the proposed approach improves the estimation accuracy.
